• Due to the rise and rapid growth in the number of vehicles on
road, the number accidents have also dramatically increased and it has been causing a great loss of life or most people suffer fatal injuries. • The main objective of this project is to implement an efficient way to detect accidents in real time and thus minimize the loss of life using technique which involve Microcontroller, which interfaces with GSM and GPS technology. Existing System • The Traditional detection method is that each time an accident occurs there is no intimidation to the ambulance until someone calls and informs about the accident. Thus causing delay and loss of life. • This delay is mainly due to slow intimidation to the ambulance which will be our main goal in saving sometime thus causing faster access Disadvantages of Existing System • Unable to reach the accident spot in time. • Loss of life. Proposed System This project consists of two different units, which coordinate with each other. 1. Vehicle unit. 2. Ambulance unit. The detailed explanation of this unit is given below Vehicle unit • In vehicle unit we designed vibration sensor using 2 –wire piezoelectric sensor & IC LM358P .The vibration sensor is set to particular threshold. Ambulance unit • It consists of arduino board and gsm module with LCD display and buzzer. When accident occurs it receives accident location latitude and longitude. Vehicle unit Ambulance unit Result This is the vehicle unit where we send an SMS with the emergency number to the GSM inserted in this unit. The unit saves the number and when an accident occurs the location details are sent to the same saved number. Ambulance unit When a accident is detected the ambulance unit gives an alert message. The location details are shared with the ambulance unit as longitude and latitude. Conclusion
• Whenever a road accident place occurs various types of
damages takes place which could be in the form of human beings who are largely victims, infrastructure which is damage to the government and other administration damages which occurs during accident. • By this project we provide an innovative approach to detect the accidents and rescue the victims from the accidents References • U. Khalil, T. Javid, and A. Nasir, “Automatic road accident detection techniques: A brief survey,” in International Symposium on Wireless Systems and Networks (ISWSN). IEEE, 2017, pp. 1–6. • T Kalyani, S Monika, B Naresh, Mahendra Vucha “Accident Detection and Alert System” International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-4S2 March, 2019 • K.Athavan, G.Balasubramanian, S.Jagadeeshwaran, N.Dinesh “Automatic Ambulance Rescue System” 2012 Second International Conference on Advanced Computing & Communication Technologies. Thank You