Professional Documents
Culture Documents
Intended Audience
Installation and commissioning engineers
Technical support engineers
Maintenance engineers
Scope
This document describes how to install and commission Network Cloud Engine (NCE) V100R019C00.
Constraints
You are advised to read NCE V100R019C00 Basic Software and Hardware Operations (TaiShan) first.
4. NCE Installation
5. NCE Commissioning
NCE is an innovative network cloud engine developed by Huawei. Positioned as the brain of future cloud-based networks,
NCE integrates functions such as network management, service control, and network analysis. It is the core enabling
system for network resource pooling, network connection automation and self-optimization, and O&M automation.
EasySuite is a green web-based engineering tool provided by Huawei. It covers complex engineering scenarios such as
planning, installation, and migration. The planning and design can be performed offline. During project deployment, you can
directly select this task to perform installation. Using EasySuite to create an NCE installation project simplifies installation
and deployment operations and improves efficiency.
01 02 03 04
Create a project Pre-plan Deploy Work out a report
• Enter the project • Plan the project and configure the • Confirm the site survey on the • Complete project
information of the high-level design (HLD) solution. customer side. The low-level design acceptance.
customer. • The HLD is automatically output to (LLD) is automatically output. • Output the installation
• Select the baseline support customer communication. • After hardware arrival, complete report.
solution configuration. installation and deployment
(unattended).
Network
Network
Storage
Network
Storage
Storage
Network
Storage
Server
Server
Server
Server
On-premises (physical On-premises (VM) Private cloud (OS+product) Private cloud (product only)
machine)
Deployed by Huawei Deployed by customers
• On-premises: Huawei engineers install the hardware, virtualization environment (not required during physical machine deployment), OS, database, and NCE software
in an E2E manner. The installation takes less than 3 hours.
• Private cloud (OS+product): After the customer configures the virtualization environment, Huawei engineers create VMs, install the OS, database, and NCE software.
The installation takes about 3.5 hours.
• Private cloud (product only): After customers configure OS, Huawei engineers install the database and NCE software. The installation takes about 2 hours.
Server (VM)
Hardware
Management
Application Multi-layer and multi-domain management
layer
Access domain IP domain Optical
management management management
Based on the cloud-native microservice architecture, each functional node can be deployed on demand to meet service requirements.
Database
layer GaussDB V300R001C00
Server
Typical Configuration
4. NCE Installation
5. NCE Commissioning
Learn planning See EasySuite to Configure the iBMC Use EasySuite Check the service
principles. download software management module. to install NCE. running status.
packages.
Connect hardware
Download EasySuite
before installation. Apply for licenses.
and log in to
EasySuite.
4. NCE Installation
5. NCE Commissioning
Download
EasySuite. Download the EasySuite software package from the Huawei Support website.
Create a Select the product type, product version, and configuration plan based on the live network
project. conditions (NE scale, component solution, deployment scenario, and virtualization platform).
Select the plan. Confirm the project plan and adjust the details.
View the HLD information of the project plan, such as the networking scheme, software and
Perform HLD.
hardware resources, and hardware connections.
View the LLD information of the project plan, including the server access configuration, system
Perform LLD.
IP addresses, and user passwords. In the LLD solution, set the parameters as planned.
Plan Plan the database password, NTP server, and alarm reporting parameters.
commissioning.
2 Client or The NCE web client connects to the NCE The service network is
northbou server and OSS and accesses the divided into two types:
nd management plane and O&M plane through
1 1
single network
4 4 network the client or northbound network. (southbound and
northbound networks
are not isolated, that is,
the southbound network
3 Service
network
Southbou
reuses the client or
northbound network),
Southbound devices connect to the NCE dual networks
nd
server through the southbound network. (southbound and
network
northbound networks
are isolated).
Management network
Northbound network
Southbound network
DR network
Relevant IP Address
Object Network Plane bond Network Port Description
You can use the IP address of the iBMC management module to remotely log in to the server in web
Management IP address of the iBMC mode to manage and maintain the server hardware. For example, when you remotely install the OS or
iBMC Management network -
port management module the OS cannot be started properly, you can log in to the server through this IP address to maintain the
server.
NCE client login IP
Northbound network bond0 eth0/eth4 This IP address is used to connect to the OSS, and log in to the client.
address
NCE southbound
Southbound network bond2 eth2/eth6 This IP address is used to connect to southbound devices.
network IP address
Node Internal NCE internal • This IP address is used for NCE to access the database.
communications bond1 eth1/eth5 communications IP • You are advised to set the IP address of the internal communications network to a private IP
network address address.
• This IP address is used to check the network connection status and data replication between the
NCE replication IP
DR network - - primary and secondary sites.
address
• The Replication network reuses the Internal communications network.
NCE client
Northbound eth0/ 10.9.1.20/255.255. This IP address is used to connect to the OSS,
bond0 login IP
network eth4 255.0/10.9.1.1 and log in to the client.
address
NCE
Southbound eth2/ southboun 10.9.2.20/255.255. This IP address is used to connect to
bond2
network eth6 d network 255.0/10.9.2.1 southbound devices.
IP address
1. Download the
EasySuite_V100R020C10SPC916__win3
2_x86.zip software package.
As a carrier user, log in to
http://support.huawei.com/carrier.
Search for "Network Cloud Engine" on
the Software tab page. On the
Network Cloud Engine page, select
the desired version, for example,
Network Cloud Engine-EasySuite_x.0
version.
As an enterprise user, log in to
http://support.huawei.com/enterprise
. Search for "Network Cloud Engine".
On the Network Cloud Engine page,
select the desired version, for example,
Network Cloud Engine-EasySuite_x.0
2. Go version.
to the EasySuite decompression directory and double-click start.bat. The system automatically starts the browser within 1
minute and switches to the EasySuite login page. Enter a username and password, and click Log In. The username and initial
password are admin and Changeme_123, respectively.
The LLD differentiates admission configuration and other configurations. EasySuite supports two planning methods.
a. Export the plan to an Excel file, configure it, and import it to EasySuite again.
b. Enter the planned values on EasySuite.
• Pay attention to the differences between
admission settings and other configurations.
4. NCE Installation
5. NCE Commissioning
Learn planning See EasySuite to Configure the iBMC Use EasySuite Check the service
principles. download software management module. to install NCE. running status.
packages.
Connect hardware
Download EasySuite
before installation. Apply for licenses.
and log in to
EasySuite.
Management
port
Eth0 Eth1 Eth2 Eth3 Eth4 Eth5 Eth6 Eth7
Standard cable
1. Connect the management port to the switch using a network cable. Enable the EasySuite
Note:
server to configure the hardware module.
The physical connections
2. Connect eth0 to the switch using a network cable. Enable EasySuite to install service
before and after the installation
software.
are different.
3. Connect the PC where EasySuite resides to the switch using a network cable. This
connection connects EasySuite to the server.
Procedure: Check software packages > Check parameters in offline mode > Check
parameters in online mode > Install and deploy the product
After the pre-installation check is passed, you can start EasySuite for installation and deployment. EasySuite logs in to the
environment based on the data on the Admission Settings tab page and automatically installs NCE based on the planned values on
the LLD page. The procedure for one-click
installation is as follows:
1. Configure hardware, including
configuring RAID and hardware alarm
reporting parameters.
2. Install and configure the OS.
3. Install the NCE software (including
the database).
• During the installation, you can view the installation progress and real-time installation logs to monitor the progress and
locate possible problems in time.
• If the installation is interrupted due to incorrect data planning, locate the fault based on logs. After the fault is rectified, the
EaySuite resumable installation capability helps to continue the installation from the interruption.
License
No. Usage Scenario Application Method
Category
4. NCE Installation
5. NCE Commissioning