Professional Documents
Culture Documents
5G Installation Procedure
1
Pentacom Consultancy Ltd Knowledge Transfer
Components of 5G Installation
Knowledge Transfer
abb-2css245101r0044-nfs.webp
AAU5639w Antenna
5900 BBU type
UBBPg3
External GPS Antenna System
25G SFP Single Mode (6Pcs)
Fiber Single Mode (3pcs)
Power Cable2.5mm
125 Breaker
DCDU
Blue/Black Cable Power Cable
Antenna Support – T-Bracket with pole/ H-Frame
Fiber SM
RRU Power
cable +Ve terminal
125A MCB 2
Pentacom Consultancy Ltd Knowledge Transfer
HTB1QaTxOhjaK1RjSZFAq6zdLFXak.jpg_960x960.webp
Components of 5G Installation
Knowledge Transfer
UBBPg3
(1) Rate
SFP (2) Wavelength
(3) Transmission distance eCPRI 10/25
(4) Transmission mode
BBU5900
3
Pentacom Consultancy Ltd Knowledge Transfer
Installed MAFI
Knowledge Transfer
4
Pentacom Consultancy Ltd Knowledge Transfer
5G Antenna Type: AAU
Knowledge Transfer
What is an AAU?
The AAU consists of a radio unit (RU) and an antenna unit
(AU).
Properties
Example AAU5639w
Frequency Band 2600,3500, 3600, 3700
Mhz
Tx/Rx Mode 64T64R
Application Capacity Improvement
Scenario
6
Pentacom Consultancy Ltd Knowledge Transfer
5G Antenna Type: AAU
Knowledge Transfer
Interfaces The CPRI port specifications of an AAU include the CPRI port
protocol, rate, and maximum level of cascading and maximum
distance with a BBU.
2 eCPRI 10.3125/25.78125
7
Pentacom Consultancy Ltd Knowledge Transfer
AAU mounting kits
Knowledge Transfer
.
No. Component Quantity Description
a Upper main bracket 1 Secured to the handle of the AAU
b Lower main bracket 1 Secured to the handle of the AAU
c Auxiliary bracket 2 Assembled with the main bracket for pole-mounted installation
d M10x150 bolt for 4 Used to assemble a main bracket with an auxiliary bracket.
pole-mounted
installation
e Downtilt supporting arm 1 Secured to the handle of the AAU. It is used to adjust the mechanical downtilt.
8
Pentacom Consultancy Ltd Knowledge Transfer
Physical Ports
Knowledge Transfer
CPRI1 DLC connector Optical port 1 with a data rate of 10.3125 Gbit/s or 25.78125 Gbit/s. An optical module
must be inserted into the port for optical fiber installation.
CPRI0 DLC connector Optical port 0 with a data rate of 10.3125 Gbit/s or 25.78125 Gbit/s. An optical module
must be inserted into the port for optical fiber installation.
PWR Outdoor quick-lock power connector –48 V DC power port
AUX DB15 male Port for an antenna information sensor unit (AISU) to transmit AISG signals.
connector
TEST N/A Reserved port, which is unavailable
9
Pentacom Consultancy Ltd Knowledge Transfer
Installing GPS
Knowledge Transfer
10
Pentacom Consultancy Ltd Knowledge Transfer
Installing GPS
Knowledge Transfer
1. Bind the GPS SPD to the left side panel of the cabinet interior using cable
ties.
Surge 4. Connect the GPS SPD jumper to the SURGE terminal on the GPS SPD.
11
Pentacom Consultancy Ltd Knowledge Transfer
BBU Login
Knowledge Transfer
Login to Existing BBU and get the Network IPs to be used on the new BBU.
Login to new BBU and load the Modified site script.
Patch Fiber cables as indicated by Integration Team.
Install new 5G fiber cables on BBU card slot 5 port 0,1,2
Install Antenna GPS on UMPT Card to enable 5G activation.
Cable Port
USB-Ethernet adaptation cable USB port on the UMPT
Straight through cable USB-Ethernet adaptation cable < >Ethernet port on Laptop
12
Pentacom Consultancy Ltd Knowledge Transfer
BBU Login
Knowledge Transfer
Laptop:
IP address: 192.168.0.(1 to 48, 50 to 254)
Subnet Mask: 255.255.255.0
Do not use the 192.168.0.49 IP for your computer. At MML perform the below commands and record
LST OMCH
The default maintenance IP address of the Base LST DEVIP
station is 192.168.0.49. use Internet Explorer Browser LST VLANMAP
LST IPRT
DSP ETHPORT
13
Pentacom Consultancy Ltd Knowledge Transfer
BBU Login
Knowledge Transfer
Using LMT
Username: admin
Default Password: Y5$7Kc@u#$tr&LhF
New password:Safaricom@123456
14
Pentacom Consultancy Ltd Knowledge Transfer
Sample of Script:
Knowledge Transfer
SET DHCPSW:SWITCH=DISABLE;
ADD DEVIP:SN=7,SBT=BASE_BOARD,PT=ETH,PN=1,IP="10.163.98.222",MASK="255.255.255.252",USERLABEL="OAM";
ADD VLANMAP:
NEXTHOPIP="10.163.98.221",MASK="255.255.255.255",VLANMODE=SINGLEVLAN,VLANID=3001,SETPRIO=DISABLE,FORCEEX
ECUTE=YES;
ADD IPRT:
RTIDX=0,SN=7,SBT=BASE_BOARD,DSTIP="10.153.64.0",DSTMASK="255.255.255.0",RTTYPE=NEXTHOP,NEXTHOP="10.163.98.
221",MTUSWITCH=OFF,DESCRI="To iMAE",FORCEEXECUTE=YES;
ADD OMCH:
BEAR=IPV4,IP="10.163.98.222",MASK="255.255.255.252",PEERIP="10.153.64.15",PEERMASK="255.255.255.255",BRT=NO,C
HECKTYPE=NONE;
SET DHCPSW:SWITCH=ENABLE;
15
Pentacom Consultancy Ltd Knowledge Transfer
Existing BBU
Knowledge Transfer
16
Pentacom Consultancy Ltd Knowledge Transfer
New Installed BBU:
Knowledge Transfer
17
Pentacom Consultancy Ltd Knowledge Transfer