Professional Documents
Culture Documents
FOR
RETAINING WALL
FOOTING PREPRATION
DEPTH SOIL INVESTIGATION REQUIREMEN FOR RETAINING WALL
Depth of Investigation by
Depth of Investigation by
Handbook of Geotechnical Investigation & design Tables
SNI 8460-2017
Burt Look
Isobars of the vertical stress under footing are
developed based on the Boussinesq Equation
Pressure isobars, developed to estimate the
vertical stress under a square and a strip footing
Isobars of the vertical stress under footing are
developed based on the Boussinesq Equation for
Circular Footing
Approximate method to
determine the increase in
stress with depth
This can be the part of the
presentation where you introd
yourself, write your email…
FOOTING DIMENTION According to :
1. SNI, depth of investigation is
a. d+3B = 0,4+3*4,3 = 13,3 m
b. > 6 m
Zi by SNI is the deepest betwin a and b, Zi=13,3 m
2. Design Tables of Burt Look, Zi = 4B
Zi = 4* 4,3 = 17,2 m
3. Isobars of the vertical stress under footing 5 %based on the
Boussinesq Equation , Zi about 2,5 B = 2,5* 4,3 = 10,75 m
4. the vertical stress under footing 5 %based on the Approximate
method Zi iis about 7 m, or about 2B.
B= 4,3 m
Refers to calculation above, for design and
implementation minimum 7 m depth must be
considered.
As state in design analysis of retaining wall KM 10,
designer already gave guide to easier implementation
on site, with CBR 6%.
DCP TEST
For In Situ CBR