Professional Documents
Culture Documents
• ANSYS mechanical is a finite element analysis tool for structural analysis, including linear,
nonlinear and dynamic studies. This computer simulation product provides finite elements to
model behaviour, and supports material models and equation solvers for a wide range of
mechanical design problems.
• The program has many finite-element analysis capabilities, ranging from a
simple, linear, static analysis to a complex, nonlinear, transient dynamic analysis.
• The analysis guides in the documentation set describe specific procedures for
performing analyses for different engineering disciplines.
• The process for a typical analysis involves three general tasks:
• 1. BUILDING THE MODEL
• 2. APPLYING LOADS AND OBTAINING THE SOLUTION
• 3. REVIEWING THE RESULTS
SIMPLE CANTILEVER
• THE PROBLEM DESCRIPTION IS AS FOLLOWS:
• GEOMETRY: 1200 X 180 X 10 MM
• LOAD: 18000 N APPLIED AT THE END OF THE CANTILEVER IN THE STRING DIRECTION
• SUPPORTS: THE BASE IS FIXED IN ALL DEGREES OF FREEDOM, ALL OTHER BOUNDARIES
ARE FREE.
• MATERIAL: STEEL,
• UNITS: N, MM, PA
• MESHING SIZE:100MM
EXAMPLE TWO
t=5mm
h=50mm
l=100mm
f=1000N
r=5mm
Meshing size =5
COMPRESSION FORCE