Professional Documents
Culture Documents
850 SA ATP11A Guideline 210119
850 SA ATP11A Guideline 210119
850 Standalone SA with One LCB3 card to be inserted in Excel File and Word File to be Uploaded
5
CDU -- Option:1 existing CDU 6 Circles in SF Utility
6
CDU with 2300 SA. New CDU 6 Circles ATP11A through Normal Process in SF
required.
850 Standalone SA with Sites with RDU and no 2300 SA.
7 CDU -- Option:2 All Circles ATP11A through Normal Process in SF
New CDU Required
8
Where CDU/RDU present w/o 16 Circles ATP11A through Normal Process in SF
2300 SA. New CDU required
850 Standalone SA with One LCC2 card to be inserted in Excel File and Word File to be Uploaded
9 All
RDU existing RDU with 2300 SA in SF Utility
a) In site details ( Front Page ), "Frequency Band" has been added.
b) To write Serial No. below the RRH Serial No. & LCC2/LCB3 Card Photos.
c) 3 No's Additional blocks added for "Azimuth Compass Photos Alpha/Beta/Gamma".
d) 1 No's Additional blocks added for "LCC2/LCB3 Card Serial No. Sticker".
3) 850 XLF Changes:
a) Column 'Q' header has been changed from " LCC2 Card" To "LCC2/LCB3 Card".
b) For CDU installation, in “N” column put CDU.
850 SA Excel File
• In this sector addition, one new CDU to be installed apart from the existing DU.
• This new CDU will have a XNB ID.
• For ATP11A, there is no need to upload excel and word file. We will do normal
ATP11A for the said XNB site. ( even if one sector is installed )
• Install eNB task to be closed before ATP11A with UAMA/LMA3card serial number,
so that integration is not hampered.
• One new GPS antenna to be installed. How to capture that in the ATP11A module
is mentioned in the below slides.
• One BH cable to be installed with this CDU. CDU port will be 2 and CSS port will be
9.
• 16 amps MCB required for CDU installation.
• RFE1 survey of 2300 to be done first. Then RFE1 survey of 850. After that , we
have to attempt for ATP11A of 850 SA.
• CDU position, Roxtec and MCB may be considered as per the availability.
To be filled by
Respective Photo.