Professional Documents
Culture Documents
Working
As the wind strikes, wind energy is converted into electrical energy.
Bias circuit is used as a protection here. ie, its function is to allow current flow in
only one direction (Wind turbine to battery)
Voltage is measured across bias circuit to measure the voltage generated from
wind turbine (Voltage divider is connected here)
The signal is then given to microcontroller
To read the voltage in secondary battery, another voltage divider is connected
across it and the data is given to microcontroller
To read the voltage in main battery, again voltage divider is connected here and
microcontroller receives the signal
When brake is applied, charge flows from secondary battery to main battery
Braking unit(Reads the signal) is used here to switch the operation
When brake is applied, signal is given to relay and the main battery is
charged.
The output from the secondary battery is DC. It is then converted to AC
using an Inverter.
Charging Circuit converts AC to DC and then the battery is charged.
The readings from microcontroller are displayed in the display unit