Professional Documents
Culture Documents
1
A new design?
Right the first time?
No re-design?
No teething troubles?
2
A sea trail?
one tailored program?
Professional?
Practical?
Experienced operators?
3
By applying the following disciplines :
- Measurements
- calculations
- metallurgical examination
- Analysing
4
Failure examination
Some examples:
5
Cracked cone of a propeller shaft
6
Fatigue fracture in crankshaft of large diesel engine
7
Elastic coupling which ruptured because of a high level of torsional vibrations
8
Torsion fatigue fracture, initated from a key-way
9
Cracked blower foundation,
caused by excessive vibration
level
10
Cracked rim of airplane wheel
11
Heavy wear and surface fatigue in a pump shaft
12
Micro crack in stainless steel
Fracture examination
using scanning electron
microscope
13
Measurements:
14
Vibration
measurements
using multi-channel
equipment
15
Vibration measurements of a PTO
generator
Vibration
measurement on
a large diesel
engine
Weighing of bridge
sections
16
Material stress
measurements using
strain-gauges
18
Verification of measured stress with the results from 3D finite
element calculations.
19
Inspection of the
planetary gearbox of
wind turbine
Measurement of torque
and power of a large
stationary pump
20
Determining the actual
pulling force of tug by means
of a bollard pull
21
Vibration measurements
and analysis
Use the advantage of over 30 years
of experience in vibration
measurements, vibration analysis
and vibration calculations!
22
Condition monitoring
Periodical (or semi-continuously)
measurements of vibrations, also
with the use of telemetry systems!
Gives accurate indication of maintenance
requirements of an installation.
Perform maintenance only when needed,
and avoid premature failures.
Reduce your maintenance costs!
23
Engineering and
calculations
24
Design optimising of resiliently
mounted Diesel-generator
installations.
Avoid or solve vibration
problems though accurate
Finite element modelling and
calculations.
25
Left:
Study into the vibration
behaviour of a ship’’s hull using
3D finite element models.
Right:
Study of the vibration behavior of
a propeller shaft, in relation to
repeated occurrence of damage
in the installation
26
Checking the level of
mechanical stress
and deflection of the
rudder support in a
high-speed sailing
yacht
27
Further engineering activities are:
Design and control calculations (also according to class rules)
1 Alignment calculations
2 Whirling calculations
3 Torsional vibration calculations
4 Finite element calculations
28
The Monitoring
department:
Products and services with regards to:
- Force and load monitoring sensors
- Software
- monitoring solutions
29
Design, manufacturing,
installation and certification of
high-end, custom made
loadcells, loadshackles and
monitoring systems for offshore,
dredging and industrial
applications
30
The scope of work of the monitoring department
31
Some examples of
custom-made force
transducers
32
Some examples of
custom-made force
transducers
33
Upgrading of the force measurement systems of the
equipment of AllSeas “Solitaire”
Design and delivery of all sensors, signal processing hardware and software for
the force measurement and monitoring of:
- Stinger
- Rollerboxes
- Winches
Scope of delivery :
2 tensile force load transducers with a capacity of 1400
TonF
4 compresion load cells with a capacity of 200 TonF
14 Pieces of 60-tons biaxial tensile load transducers
4 underwater measurement transducers for combined
tensile AND torsion forces.
24 load cells in the tensioner
34
Techno Tempomaat
After years of succesfull operation in the push barge shipping, now
available:
The advising
tempomaat
A smart combination of software,
electronic charts, GPS and
extensive knowledge of ship’s
propulsion systems.
Fuel and emission reductions
up to 15% (proven under
supervision of the Dutch institute
“rijkswaterstaat”)
35