going to make a Dodecahedron) Part 2 of 3 By: Mr. Gravitt Step 23.1 – Draw a Vertex Axis Line • Start a New Sketch on the Plane. Step 23.2 – Draw a Vertex Axis Line • Name it VERTEX AXIS DRAWING. Step 23.3 – Draw a Vertex Axis Line • Draw a line from the Origin to the Center of the Triangle. Step 23.4 – Draw a Vertex Axis Line • Draw a line from the Origin to the Center of the Triangle. Step 23.5 – Draw a Vertex Axis Line • Extend the line up a little bit. Step 23.6 – Draw a Vertex Axis Line • Click Dimension Tool & make it 1 inch. Step 23.7 – Draw a Vertex Axis Line • Turn it into a Construction Line. • Click Finished (Green Checkmark). Step 24.1 – Loft It • Select Loft & Name it 1ST TRIANGLE LOFT. • Click Triangle & the end point of Vertex Axis. Step 24.2 – Loft It into a Tetrahedron • Part 1 should appear. • Click Finished (Green Checkmark). Step 25.1 – Insert Hexagon Axis • Part 1 should appear. • Select the TOP or Right Plane & make a New Sketch. Step 25.2 – Insert Hexagon Axis • Name the New Sketch the HEXAGON AXIS DRAWING. • This Axis/Sketch will be used a lot… Step 25.3 – Insert Hexagon Axis • Select Line Tool & Construction Line. • Select the end point of the triangle that is ON THE HEXAGON AXIS SKETCH. Step 25.4 – Insert Hexagon Axis • End the line at the Origin. • Click Finished (Green Checkmark). Step 26.1 – Make 5 Tetrahedrons • Pattern Dropdown Box. • Choose Circular Pattern. Step 26.2 – Make 5 Tetrahedrons • Call it HEXAGON CIRCULAR PATTERN. • Click on Entities to pattern & select Part 1. Step 26.3 – Make 5 Tetrahedrons • Click on Axis of pattern. • Click on the HEXAGON AXIS. Step 26.4 – Make 5 Tetrahedrons • Type in 360° & 5 copies (Parts 1-5). • Click Finished (Green Checkmark). Step 27.1 – The Hexagon Plane • Hide a couple of the planes you’ve just made to get them out of the way. Step 27.2 – The Hexagon Plane • Start a New Plane. • Call it HEXAGON PLANE. Step 27.3 – The Hexagon Plane • In the Dropdown Select 3 Point Plane. • Pick 3 of the 5 Tetrahedron points. Step 28.1 – Hexagon Sketch • On the Hexagon Plane start a new sketch. Step 28.2 – Hexagon Sketch • Name the new sketch HEXAGON DRAWING. Step 28.3 – Hexagon Sketch • Draw a line from point to point to make a Hexagon. Step 28.4 – Hexagon Sketch • Turn off / hide Parts 1 -5 & other plane drawings. Step 28.5 – Hexagon Sketch • YES, We have done all this work to make this! • A Hexagon, the right size, oriented correctly, & made a couple • Lets make the first part we of Axis for us are actually going to keep. to use.