The entablature is the cylinder block housing that incorporates the scavenge air space and cooling water space. It is made of cast iron and forms the housing for the cylinder liners. The casting can be for individual cylinders that bolt together or as a multi-cylinder unit, and the underside is machined to align and bolt to the A-frame and bedplate using fitted bolts for alignment purposes only, as tie rods are needed to resist firing forces separating the components.
The entablature is the cylinder block housing that incorporates the scavenge air space and cooling water space. It is made of cast iron and forms the housing for the cylinder liners. The casting can be for individual cylinders that bolt together or as a multi-cylinder unit, and the underside is machined to align and bolt to the A-frame and bedplate using fitted bolts for alignment purposes only, as tie rods are needed to resist firing forces separating the components.
The entablature is the cylinder block housing that incorporates the scavenge air space and cooling water space. It is made of cast iron and forms the housing for the cylinder liners. The casting can be for individual cylinders that bolt together or as a multi-cylinder unit, and the underside is machined to align and bolt to the A-frame and bedplate using fitted bolts for alignment purposes only, as tie rods are needed to resist firing forces separating the components.
Entablature is the name given to the cylinder block,
which incorporates the scavenge air space and the cooling water space. It forms the housing to take the cylinder liner and is made of cast iron. The casting is either for individual cylinders which after machining on the mating surfaces are bolted together to form the cylinder beam, or they may be cast as a multi-cylinder units, which are then bolted together. The underside of the cylinder beam is machined and is then aligned to the A-frame and fastened in position using fitted bolts. It is important to remember that the fitted bolts used to bolt the entablature, A-frame and bedplate together are for alignment and location purpose only. They are not designed to resist the firing forces, which will tend to separate the three components. This is the job of tie rods or bolts. Liners inside the entablature. Also note the diaphragm plate and stuffing box.
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings