sleeve that are cut and seamed to fit on the shoulder and taper to nothing underneath the arm. This style is usually not as loose as a standard short sleeve T-shirt, but more like a small umbrella — or cap — covering the shoulder. Puff Sleeve
Short sleeves that have
added fullness in the sleeve cap and/or the bicep. The bicep is either elasticized or has a cuff. Varying amounts of fullness can be added for more or less 'puff'. Drop Shoulder Sleeve
Often used to describe
sleeves where the armhole position falls on the top of the arm area, in contrast to a set in sleeve where the armhole seam would sit right on top of the shoulder point. Cuff Shirt Sleeve
A layer of fabric at the
lower edge of the sleeve of a garment (shirt, coat, jacket, etc.) ¾ Sleeve
Types of long or 3/4-
length sleeves that are fitted at the armhole and flared out at the bottom, either with a seam or seamlessly, are called as bell sleeves. Batwing Sleeve
Also known as a dolman
sleeve, is a long sleeve with a baggy, wing-like appearance. A batwing starts wide at the shoulders and has deep armholes, with the sleeves tapering toward the wrist. Bishop Sleeve
A long sleeve that is gathered
at the bottom with a button cuff, slit and facing. This lesson will teach you the principles of 'slashing and spreading' to add fullness to sleeves, as well as to other areas of a garment. Bell Sleeve
A long sleeve fitted from
the shoulder to elbow and gently flared from elbow onward. Cape Sleeve
Full and flowing sleeves
that look like capes. The fabric is gathered at the shoulder and flares out like a cape from there. THANK YOU
Teach Yourself Stitch Craft and Dressmaking Volume VI: Introduction to Trousers and Slacks - Drafting patterns for stitching pants, trousers, and slacks