Professional Documents
Culture Documents
2023-2024
Follow up of Zeroth Review
2
Objective
3
Project Description
Salient features and techniques involved in the project to be introduced with
relevant information
• This project provides features such as detection of live human in building collapse or in any
disaster situation, send the signals by wireless
• IoT based mobile application is used for controlling the robot direction and also used for receiving
monitoring status.
• This system used for long range distance and control using IoT
4
Problem Definition
Description of problem identified
• Its risk to enter in building collapsed or disaster environment , sudden changes , hard path, need long
distance control for robot, hard resume, finding the exact position of the live human.
• Robot used to make easy for finding live human in disaster condition , sensors and IoT technology is
used to make ease of rescue operation.
5
Proposed Solution
Proposed solution / innovation with the technology
to be used
• To create a robotic system that will get the location of the Live Human and send it to Mobile APP
, where the location will be used to rescue the human being.
• The system gives warning to Rescue Team through Mobile App if any human is detected
as live which saves human life .
IoT and PIR Sensor is used for controlling and monitoring robot which saves human life.
6
Proposed Solution - Justification
<Justify the need of the technology/algorithm to be used in the proposed system>
7
Requirement Specification
Software <Put ‘NA’ for non requirements>
FRONT END TOOLS HTML , CSS, JAVAScript
BACK END TOOLS
MARKUP LANGUAGES
SCRIPTING LANGUAGES
MIDDLE WARE TECHNOLOGIES
IDE Android Studio
SIMULATION TOOLS
NETWORK/WIRELESS TECHNOLOGIES HTTP POST ,HTTP GET
ANY OTHER
Hardware
Arduino board ,ESP board based microcontrollers , 12 Volt DC Motor, Motor Driver , PIR Sensor,
12V Battery
8
References
Give details of the journals/books referred. The reference material should be listed in the alphabetical order of the
first author. The year of publication must be followed after the authors’ name. Volume No. and PP must be
specified.
1. <Name of the author(s)> <Year of Publication>, “<Title of the Paper>”, <Publication Details>
Example:
Authors Year Title
1. Ivan Lequerica, Pedro M. Ruiz and Victor Cabrera (2010), “Improvement of Vehicular
Volume Communications by Using 3G Capabilities to Disseminate Control Information”, IEEE Network.,
& vol. 24, no. 1, pp 32-38. Page to Page Name of the
Number Journal
2. Schwarz D, Kloeden H, and Rasshofer R (2016), “Ko-TAG—Cooperative sensor technology for
traffic safety applications,” in Proc. Int. Workshop Intelligent Transportation, pp 245-250.
9
THANK YOU