Professional Documents
Culture Documents
Lecture 3
Lecture 3
Bài 3
OPERATORS & TRANSPORTERS
Model 3
Model 3 introduces the concept of adding operators and transporters to a model, and
explores object properties in greater detail. Model 3 also introduces additional
graphical statistical output options.
What You Will Learn
• How to access and modify object properties
• How to add a team of operators to the model
• How to add a fork truck transporter to the model
• How to view object statistics while the model is running
Model 3
In this model you will be introduced to the Dispatcher, Operator, and Transporter
objects.
Model 3
In model 3 we will use a team of operators to perform the setup for the processing
of the flowitems in the model. One of two operators will need to set up the
processor. Once set up, the process can run without the need for the operator to be
present. The operators must also carry the flowitem to the processor before the setup
can begin. When the process is complete, the flowitem moves to the conveyor
without the assistance of the operator.
When the flowitem reaches the end of the conveyor it will be placed in a queue
where it will be picked up by a fork truck and taken to the sink. We may find it
necessary to have more than one fork truck once we view the model as it runs. After
the model is completed, view the default charts and graphs and address any
bottlenecks or efficiency concerns. Below is a flow diagram of model 3.
Model 3
Model 3
Model 3 Data: