Professional Documents
Culture Documents
Klipen Packing and Palletizing Standard 2022 RD
Klipen Packing and Palletizing Standard 2022 RD
2. Contenido DOS
Palletizing Standard
3. Contenido TRES
4. September / 2022
Contenido CUATRO
5. Contenido CINCO
In this document you will find the KLIPEN® Standard requirements defined by our Logistics
Management for the palletizing of the following products: ceramics, porcelain and laminate
floors, SPC.
It is an illustrative document to avoid mistakes and prevent accidents and future claims. If you have
any question about this document, please feel free to contact us: mblanco@klipengroup.com and
aangulo@klipengroup.com
Klipen® Pallet Requirements
2cm
6. Base table of 1.10 m long x between 9 or 11 cm wide x at least 2 cm thickness
7. 9 blocks of solid wood (Pine) between 9 cm to 12 cm wide x 9cm to 11 cm long x between 10 cm
high
Pallet requirements
• Quality standard pallet
Palletized detail
Pallet overflow Loose straps and without cardboard Tight straps with cardboard
corners corners without pallet overflow
Requirements Palletized
• Examples
Not Permitted Permitted
Badly stowed Danger of collapse (poor Pallet well stowed with good quality
quality wood and pallet woods without overflowing
overflow)
Requirements Palletized
• Examples
Not Permitted Permitted
Extra boxes above the pallet do not allow No extra boxes on the pallet that allow
proper stacking on top of the pallet stacking respecting the maximum height
recommended by the supplier
Requirements Palletized
• Examples
Wet pallets with evidence of fungi Dry pallets without evidence of fungi
Requirements Palletized
• Examples
Without heat sealing or film use Heat sealing covering the entire pallet
Requirements Palletized
• Examples
Not Permitted
Well identified pallets with their respective packing label on the front side and on the side of each pallet
Label Information boxes
Regardless of the orientation, if it is vertical or horizontal, the boxes must contain the following information
This apply for Klipen Boxes and Co-branding
Label Information boxes
1 1. Mts2 por Caja / SQM per Box: The performance per box, for example 60x60 is 1,44 sqm per
2 box
3 2. No Piezas por Caja / Pieces per Box: The performance per box, for example 60x60 is 4
pieces per box
4 3. Tamaño nominal / Size: Nominal size, Example 60x60, 80x80, 60x120
5 4. Tamaño de fabricación / manufacturing size: Nominal size, Example 60x60, 80x80, 60x120
6 5. Peso / Weight: you should put the Wright in Kgs per box
7 6. Naturaleza de la superficie / Nature of Surface : Example full body, color body Esmaltados
(GL) y No esmaltados (UGL)
8
7. Baldosa tipo/ Tile Type: refers to the use to which it is put Wall or Floor (revestimiento o
9 pavimento)
10 8. Grupo de absorción de agua, Watter absortion.: Example <0,5% BII BIA
11 9. Espesor balsosa (mm) / Thickness: Example 9mm or 6mm
10. Terminación de los bordes / Edge finish: Example rectified
12 11. Tamaño modular / modular size:
13 12. Calidad / Quality : grade 1 or primera
14 13. Fabricación regida por la norma / Manufacture governed by the standard: Example ISO
13006
15
14. Resistencia al deslizamiento / Slip resistance: DCOF or R11
16 15. Instrucciones de uso / Instructions for use: if the product can be used on the wall or on the
floor, the symbols are used.
17 16. Marca Comercial/ Brand Name: KLIPEN SIGNATURE / KLIPEN / DECORELA /
NOVAGAMA / DURANATO
Label Information boxes
1. Nombre / Name: You should put the Klipen name as per the product
according
2. Lote / Tono / Shade / Batch Products made as specified amount within a time
frame
3. Fecha de fabricación / Production Date: Products made as specified amount
within a time frame
4. Importado por / imported by: it is de company in each country.
3
4
Label Information sticker
Label Information sticker
The label must be on the two sides of each box. It could be in two parts
Label Label
The label information apply for all KLIPEN / DECORELA / NOVAGAMA / DURANATO Brands
Identification Boxes example
• Box label
The label must be on the two sides of each box. It could be in two parts
Label Label
The label information apply for all KLIPEN / DECORELA / NOVAGAMA / DURANATO Brands
Identification Boxes
• Box label
The label must be printed directly on the box or on a sticker and NOT stamped as it is easily erased.
1. NUMBER OF CONTAINER
2. SEAL NUMBER
3. SKU (KLIPEN CODE PER EACH COUNTRY)
4. NAME (KLIPEN NAME PER EACH COUNTRY)
5. SIZE
6. SHADE / BATCH
7. MANUFACTURE DATE
8. SQM (M2) Example
9. QUANTITY OF BOXES (CARTONS)
10. BOXES PER PALLET
11. GROSS WEIGHT (KGS)
12. NET WEIGHT (KGS)
Recommended
Distribution of Pallets in Containers
• Mooring Method Container
All cargo must have a lock or tie to reduce the movement that occurs at sea inside the containers including the
drainage bag (between pallets and / or pallets-container) as shown in the images:
Poor quality of pallets: Damaged Wood, fungy, wrong size, press Wood in the bases USD 30 per pallet
• The packaging requirements stated in this document ara very basic and they do not be out of the
capibility of every factory that exports.
• Failure to follow our minimum requirements for packaging and pallet quality will result in extra costs
that will be passed on the supplier (factory).
• If you have any doubts with this document, please do not hesitate to comment us.
• On the boxes label information you cannot let blank spaces or with not marking, any lacking information
means non compliance of the customs standard which incurr in fines with competent authorities.