You are on page 1of 1

.f8.f8.

=a

;:.

7;."

~r -:al? .. ..u ~r
+,y\l -M.\otl +,y\! -wm,. ,.,-..5LJ . +,y\! - w,y,.,

~
L.L.C.
. ~

TRANS GULF CEMENT PRODUCTS


DUBAI OFFICE: P.O.Box 25595, Dubai, U.A.E., Tel. : +97148801020, Fax: +97148801021 ABU DHABIOFFlCE: P.O.Box 131329, Abu Dhabi, U.A.E., Tel.: +97126797959, Fax: +97126797960

,.,-..5LJ . +,y\l - M.I!..DLA

t'

,..DLA . ~t'.

.,......,,1 . \flY"

.,..-+'

.! , .."" ""

.,...."....

.,....

.,......,,1

www.tgcp.ae : ~L...... -' ~

E-mail: Info@tgcp.ae : ~~!...L....:!>--:'

For vibration of coloured or 2-mix paving mat shall be used to protect paving stones. Vibration

blocks a Plate-glide-device

Polyurethane

shall not be carried out within one meter of an unrestrained after compaction damaged paving shall be replaced.

edge.

Immediately H JOINT

FILLING

After initial vibration, fine sharp sand, washed black sand 0-2mm natural or crushed shall be brushed into joints and further passes of the vibrating plate compactor to fill the joints shall follow. More sand shall be spread over the surface if required. Evenly spread sand can remain for some time on the paving. After a period of 3 months, a second joint filling shall be provided. Joint filling sand shall comply to Part I Immediately I JOINT after final compaction MATERIAL and joint filling paving can be opened for traffic.

FILLING

Fine aggregates shall be clean, hard, durable of uniform quality and free from any deleterious substances and shall contain a minimum of 30% natural siliceous sand, and shall have the following physical and chemical properties: Property Particle size distribution Clay, Silt and Dust Organic Matter Content Water Absorption Relative Density Shell Content Soundness (MgS04), 5 cycles (Apparent) BS 812, Part 106 ASTM C88 BS 812, Part 119 BS 812, Part 118 BS 812, Part 117, Appendix "C" ASTM C 289 BS 1377, Part 3 BS 812, Part 2 Test Method BS 812, Part 103 Permissible Limit

BS 882 max.4% max.0.05% max.2% min. 2.6% max.1% max.5% max.25% max.0.3% max.0.03% Innocuous

Acid Soluble materials Sulphate Content (S03) (CI)

Chlorides Content

Potential

Reactivity

-3-

You might also like