Professional Documents
Culture Documents
Steam Turbines
Ansaldo Energia has 100 years experience in the design, manufacturing and installation of steam turbines. It has supplied about 700 steam turbines worldwide with a total capacity of nearly 100 GW. Dedicated R&D and Service organizations assist Clients with continuous product improvements, combined with the traditional reliability and robustness of Ansaldo Energia products: the result is a unique and balanced value package based on innovation and reliability. Ansaldo Energia has a comprehensive portfolio of 50 Hz and 60 Hz non-reheat and reheat steam turbines ranging from 40 MW to 1000 MW for conventional steam cycles, combined cycles and cogeneration applications. In addition Ansaldo Energia offers a complete line of geothermal steam turbines from 20 MW to 150 MW.
Types and applications Reheat Turbines
Thermal Fossil-fired Steam Cycles Combined Cycles Cogeneration Plants Solar Plants
90
Series
2-cylinder: MT15
350
Non-Reheat Turbines
2-cylinder: MT20 Thermal Fossil-fired Steam Cycles Combined Cycles Cogeneration Plants Solar Plants
150
1-cylinder: MT10
40 250
Geothermal Turbines
Geothermal Cycles 0 GT
20 150
100
200
Modular design concept Ansaldo Energia steam turbines are based on a modular concept to reduce technical risk and manufacturing time and ensure high reliability. Each model is a combination of well-proven, pre-engineered modules of different sizes, to provide a broad range of power ratings and applications. Several different material options are available to meet different steam conditions up to the most advanced ultra supercritical parameters (600C/620C).
Steam Turbine IP/LP rotor
Blading Over the years of its technological history, Ansaldo Energia has designed both impulse and reaction steam turbines. Today Ansaldo Energia steam turbines are based on reaction technology, while the impulse design is maintained in geothermal and small-size steam turbines. All blades have 3D airfoil design to maximize stage efficiency, achieving 92% of efficiency in the HP section and 94% in the IP section. LP last stage blading The development of longer last stage blades is one of the most effective solutions to achieve a compact and a highly efficient turbine design. A family of modern last stage blades up to 48 is available, with free standing or coupled solution, to satisfy any cooling condition and back pressure requirements.
Separate HP and IP sections Generally, Ansaldo Energia steam turbines for reheat applications have separate HP , IP and LP sections to deliver the highest possible sustained efficiency and good thermal flexibility. For output up to 300 MW, a compact, combined, single flow IP/LP solution is available, thanks also to the use of the welding technique used for the IP/LP rotor. Shrink ring design The HP inner casing of reheat turbines has a shrink ring design that does not require any massive horizontal flange. The shrink rings hold the two half inner casings together to form a symmetrical, light geometry with uniform mass distribution. They are assembled or removed by heating them with annular gas burners. The advantages of this solution are: rapid start-up and shut-down and excellent behavior during load changes simple dismantling and reassembly during maintenance
Axial and side exhaust arrangement In addition to the traditional downward exhausts for single and double flow configurations, low pressure modules are available for single flow axial exhaust or double flow side exhaust to the condenser. Axial and side exhaust modules, developed primarily for combined cycle applications, allow installation of the turboset on low foundations, minimising overall foundation costs and reducing the overall height of the machine building.
Welded rotors Ansaldo Energia uses the welding technique for rotor manufacturing, in which the rotors are built from forged disks and welded together using a combination of tungsten inert gas and submerged arc processes in a dedicated rotor welding shop. This technique allows the use of different materials for HP , IP and IP/LP rotors, providing high temperature resistance at the hot end and high toughness at the cold end, and allowing large LP rotors to be manufactured from smaller forgings. Moreover welded rotors have better thermal flexibility, which is a significant advantage for startup, shut-down and load changes.
Product Line
Steam Turbines for Conventional Steam Cycles Todays medium and large power generation steam turbines are mainly reheat type with regenerative feed water cycle and possible district heating applications. Ansaldo Energia offers three steam turbine models, specifically designed to satisfy all possible Client requirements in terms of operating conditions, performance and reliability, including steam turbines for ultra supercritical applications.
MT15
Separate High Pressure (HP) and combined Intermediate / Low Pressure (IP/LP) cylinders
RT30
Separate High Pressure (HP), single flow Intermediate Pressure (IP) and Low Pressure (LP) cylinders
RT70
Separate High Pressure (HP), double flow Intermediate Pressure (IP) and Low Pressure (LP) cylinders
100
200
400
500
1000
Steam Turbines for Combined Cycles Steam turbines for reheat and non-reheat combined cycles must be easy to adapt to different gas turbine configurations (number and models) and steam conditions delivered by various heat recovery steam generators. Ansaldo Energia offers four steam turbine models able to meet the full range of Client requirements and all specific site conditions.
NON REHEAT REHEAT
MT10
Combined High Pressure / Low Pressure (HP/LP) cylinders
MT20
MT15C
Separate High Pressure (HP) and combined Intermediate / Low Pressure (IP/LP) cylinders
RT30C
Separate High Pressure (HP), Intermediate Pressure (IP) and Low Pressure (LP) cylinders
100
300
400
Cogeneration Steam Turbines These turbines, either back pressure or condensing, with or without controlled extractions, are used in industrial, desalination and district heating power plants. As it is basically the process that dictates the steam parameters and therefore the turbine design, each cogeneration steam turbine is a unique product, tailored to the specific needs of the Client.
Applications
The following references show examples of the aforemetioned product lines. Steam Turbines for Conventional Steam Cycles Avedre 2 - Denmark Cl t: SK Energy Ansaldo Energia scope of supply: Power Block including one RT30 steam turbine and generator Power output: 535 MW Steam parameters: 300 bar/580C/600C Commercial operation: 2001
Steam Turbines for Combined Cycles Sidi Krir and El Alf - Egypt Client: W.D.E.P . 2x(2+1) Combined cycles with F class gas turbines Ansaldo Energia scope of supply for plant: one RT30 steam turbine, turbogenerator, condenser, bypass Power output: 275 MW Steam parameters: 125 bar/565C/565C Commercial operation: 2010 Cogeneration Steam Turbines Barka I - Oman Client: ACWA Power 2+1 Combined cycle desalination plant with E class gas turbines Ansaldo Energia scope of supply: two AE94.2 gas turbines, one MT20 steam turbine and relative generators Steam turbine power output: 220 MW Steam parameters: 77 bar/541C Commercial operation: 2003
UK (5)
308 MW
BELGIUM (4)
1,123 MW
CROATIA (1)
320 MW
USA (8)
276 MW
ALBANIA (1)
30 MW
FRANCE (3)
1,375 MW
AUSTRIA (1)
160 MW
GREECE (6)
891 MW
THAILAND (3)
225 MW
MEXICO (21)
2,365 MW
ITALY (355)
50,921 MW
JAMAICA (1)
33 MW
MOROCCO (8)
900 MW
LYBIA (2)
40 MW
CHINA (7)
2,139 MW
MALAYSIA (1)
99 MW
OMAN (1)
220 MW
PHILIPPINES (2)
110 MW
YEMEN (9)
325 MW
NICARAGUA (5)
221 MW
EQUADOR (1)
132 MW
TUNISIA (3)
509 MW
EGYPT (9)
2,066 MW
SYRIA (6)
598 MW
UAE (12)
875 MW
850 MW
PANAMA (3)
120 MW
INDIA (12)
2,016 MW
1,792 MW
BRAZIL (7)
674 MW
ARGENTINA (12)
1,587 MW
BOTSWANA (1)
64 MW
LABANON (7)
940 MW
JORDAN (5)
365 MW
Ansaldo Energia Steam Turbine references since 1950 are here represented.
16152 Genova - Via N. Lorenzi, 8 - Italy Tel: +39 010 6551 - Fax: +39 010 655 3411 E-mail: ansaldoenergia@aen.ansaldo.it
ansaldoenergia.com
05/2012
Petergraf