Professional Documents
Culture Documents
Fig. 12 Bevel For Outside Thickness Fig. 14 Bevel For Combined Thickness
Fig. 12 Bevel For Outside Thickness Fig. 14 Bevel For Combined Thickness
5-2003
GENERAL NOTES: (a) When the materials joined have equal minimum specified yield strength, there shall be no restriction on the minimum slope. (b) Neither t1, t2, nor their sum t1 + t2 shall exceed 0.5t. (c) When the minimum specified yield strengths of the sections to be joined are unequal, the value of tD shall at least equal the mating wall thickness times the ratio of minimum specified yield strength of the pipe to minimum specified yield strength of the flange. (d) Welding shall be in accordance with the applicable code.
GENERAL NOTES: (a) When the materials joined have equal minimum specified yield strength, there shall be no restriction on the minimum slope. (b) Neither t1, t2, nor their sum t1 + t2 shall exceed 0.5t. (c) When the minimum specified yield strengths of the sections to be joined are unequal, the value of tD shall at least equal the mating wall thickness times the ratio of minimum specified yield strength of the pipe to minimum specified yield strength of the flange. (d) Welding shall be in accordance with the applicable code.
Note (4)
B Note (3)
Y Note (2)
tf
GENERAL NOTES: (a) When the materials joined have equal minimum specified yield strength, there shall be no restriction on the minimum slope. (b) Neither t1, t2, nor their sum t1 + t2 shall exceed 0.5t. (c) When the minimum specified yield strengths of the sections to be joined are unequal, the value of tD shall at least equal the mating wall thickness times the ratio of minimum specified yield strength of the pipe to minimum specified yield strength of the flange. (d) Welding shall be in accordance with the applicable code.
O
GENERAL NOTES: (a) O p Outside diameter of flange. See para. 2.8. (b) tf p Minimum thickness of flange. See para. 2.8. NOTES: (1) X p Diameter of hub. See para. 2.8. (2) Y p Length through hub. See para. 2.8.1. (3) B p Bore. See para. 2.8.2. (4) Hub end. See para. 2.8.3.
22