Professional Documents
Culture Documents
Balance Operation: Agentek Seminar
Balance Operation: Agentek Seminar
Agenda
2/20
Agenda
3/20
Physics reminder
W = F = m g
4/20
+ 1 mg Load
2000 g
5/20
What happens if the standard is wrong? The manufacturer always provides one of these two
adjustment (compensation) devices
6/20
Agenda
7/20
8/20
9/20
Force F
Current regulator
Battery B
Position indicator
Running I0 in the no load state = 0.3 A Running I1 in the load state = 1.3 A Difference of current for 100 g = 1 A
12/20
100 g/1000 d = 0.1 g/d However, the system that has just
been described is not only of complicate use, but more limited precision, for example, by the precision of the instrument and the pin indicator.
Battery B
Position indicator
13/20
Industrial Application
14/20
Agenda
15/20
16/20
17/20
Resistance change
The load placed on the beam creates a deflection and changes the length of the strain gauge (+, -) so its resistance. The Wheatstone bridge measures the change.
A good knowledge of the mechanical properties of the metal (its elasticity) allows having load cells of good quality. The balance resolution is limited by the value of the resistance of the strain gauge
18/20
For capacities until 50 tons, the used sensors are constituted by a simple rod made of steel for the distorting body. We measure the dilation of the surface (flare). This type of sensor is sensitive to lateral efforts and to the application point of the load, requires having mounting pieces to protect the sensor from lateral load. It is suitable for the weighing of silos and weighing-bridges of large capacity.
19/20
Conclusion
20/20