Professional Documents
Culture Documents
EasyAXE User Guide
EasyAXE User Guide
Version 13.0506
Michael He
Attention please!
Without enough samples to test during program developing, we expect you will often hit the fault in the initial release. Please lets know the fault (go to menu HelpFeedback), we will try to fix it as soon as possible. We will release the fixed frequently, so you may suffer frequently update. EasyAXE doesnt support any logs, but the log collected from the scripts, please follow the script to collect log. If you have any suggestion, lets know. In this release speed and robustness are improved. The program consume a lot of computer capacity, please tune PC power plan to High Performance. Please try the examples in the package to understand how the program work
Introduction
EasyAXE is used to ease health check and trace on AXE The analysis result will be showed in graphics or text, to provide an overview to user. It supports real time mode working together with WinFiol It supports the latest technology, e.g. AXE810, EVO and NWI etc Its not verified on old technology switch, e.g. BYB501 etc.
Functionality
EasyAXE supports:
Real time mode and offline mode General info check A interface check Abis interface check GPRS check CP/RP event check NWI check Statistics Check WinFiol script execution Alog Check Signal flow Check Variable decoding Combine and split file
EasyAXE can work together with WinFiol. Both EasyAXE and WinFiol must run as administrator
Right click the icon and select Run as administrator in the context menu At least one channel is active in WinFiol.
Offline mode
Go to menu Script, select relevant script/trace, copy and run it in WinFiol manually, save the log.
Offline mode
An alternative is to copy and paste the log to tab Source, then press button Process.
Process the text in tab source
General info
General info can be get from health check script User can generate the log by himself/herself also It contains:
RP, EM info Group switch (GS890) AXEPARS BSC properties Alarm SAE Correction MISSRA info
Em&rp info
Axepars
Its showed in Tab AxePars, if both pre-check&post-check are done, or default setting exists, comparison will be performed.
Filter SetName
BSC PROPERTIES
Its showed in tab Property, if both pre-check&post-check are done, or default setting exist, comparison will be performed.
alarm
Its showed in tab Alarm, if both pre-check&post-check are done, comparison will be performed.
Filter Class
Filter Category
Filter Class
Filter Category
SAE
Its showed in tab Alarm, if both pre-check&post-check are done, comparison will be performed.
Correction
Its showed in tab Property, if both pre-check&post-check are done, or default setting exist, comparison will be performed.
Missra info
A interface check
A interface
A interface info can be get from A interface script or health check script. The result will be showed in different tabs:
C7 info
Used for traditional C7. Its showed in tab C7Grpahics, problem will be highlighted in red
Sigtran info
Use for sigTran. Its showed in tab SigTranGraphics, problem will be highlighted.
Event report
others
RMCC state printout, it gives information about call status, e.g. how many calls are ongoing, how many is setting up etc. Abnormal can be found in many cases, e.g. in the case below, many call are hang in SDCCH due to abnormal in A interface
others
First A interface message trace. It give information about the A interface connection setup rate. The Abnormal will be detected if CR (connection request) is much higher than CC (connection confirm), e.g. A interface congestion
Abis interface
Abis interface info can be get from Abis interface script or health check script. The result will be show in different tabs:
Use for traditional abis configuration Its showed in tab AbisGraphics, problem will be highlighted in red
Use for Abis over IP or Abis optimization Its showed in tab AbisIpGraphics, problem is highlighted in red.
Sort by TRH or PGW
GPRS check
GPRS INFO
GPRS info can be get from GPRS script. GBIP info is showed in tab GbIpGraphics. GB over FR is not analyzed in this version (due to lack of log). Quite some GPRS scripts are provided, most of them are in RP. This function is subject to change, any suggestion is welcome.
gbip
cp&rp event
CP&RP event info can be found from CP RP event script or health check script. Or user can generate the script manually. The result will be showed in different tabs:
Cp event
Rp event
Restart info
nwi check
Nwi info
NWI info can be get from NWI script. Real time mode is not supported. The script can not be transmitted to WinFiol in real time mode, user has to fetch it and input in WinFiol (or secureCRT etc) manually. NWI info will be showed in tab NWI/LS tab. Right click in the tab will trigger magnifier function. Its not verified in Lan Switch yet due to lack of logs.
STS/KPI
STS/KPI
Statistics can be generated by script or manually, script is recommended. Two format are supported (-z SCREEN/LF) for time being. Statistics info is showed in tab STS/KPI, and output to Excel for further process. Two modes are available:
STS
Prepare user formula if necessary, all the counters in the formula must belong to same object type. Open Statistics Dialog, select object type to collect Statistics will be analyzed and showed in data grid. For further analysis, the result can be exported to Excel
User formula should be set in parameter.log. Its not a must but it can help user to have an overview of system. E.g. call drop rate etc. All the counters in the formula must belong to same object type User can modify, add or remove the formula. Here is an example:
Statistics dialog
Go to menu ScriptStatistics Check Select Begin Time/Stop Time/Period/Object Type, e.g. select CLSDCCH and CELTCHx
Statistics output
kpi
Prepare KPI formula, counters in the formula are not limited to one object type. Open KPI Check Dialog, select KPI(s) to collect Result will be analyzed and showed in data grid. For further analysis, the result can be exported to Excel
Prepare KPI
KPI should be set in parameter.log. Counters in the formula are not limited to one object type User can modify, add or remove the formula. Here is an example:
Statistics dialog
Statistics output
Winfiol script
Quite some common scripts have been integrated. When its clicked during real time mode, it will transmit to WinFiol automatically. When its clicked during offline mode, it will show up in a dialog box, user should copy and paste to WinFiol manually and execute it.
WINFIOL SCRIPT
The script is stored in folder \Script, user can modify the script manually. Script menu can be modified as well. Its configured in file UserDefineMenu.cfg. Its written in Jason format. User can modify, add or remove script from menu as he/she wish.
alog check
Alog filter
It can filter out all the commands and alarm, and show in list box. Go to menu FileOpenOpen Transaction Log
Alog filter
Here is a snapshot, commands/alarm header are listed on left side, and relevant printout/alarms are showed on the right side.
Two kinds of file are accepted, one is the trace log, another is restart data. Three filters can be set: FID, function block or signal name Its useful for data analysis. Go to menu FileOpenOpen Signal Log
An alternative is to copy and paste signal info to tab Source and press button Process Signal
Process signal info in tab Source
Set the filters on the left side, and click button Refresh, the result will be showed on the right side
case
In this case, we need to trace BPC creation on certain TG.
Connect Winfiol to BSC Connect to Winfiol Go to Script?Abis Check ?Trace BPC creation Result will be showed in tab Source
Case continue
Case continue
Variable decoding
Variable decoding
The prerequisite to use this function is that PlexView and relevant database must be installed. Open or copy/paste log to tab Source, then press button Decode Variable.
Variable decoding
Combine files
Its used to combine files (e.g. A log) in ascend order of file name. Go to FileCombine Files
Combine files
Split file
Split file by the command, its useful when SWR or restart data are collected in one file and need to be split. Go to FileSplit File, select the file to be split, split files will be stored in the same directory of the file.
misc
package
directories
Script: stores all the scripts used in the program, you can added new scripts, and modify UserDefineMenu.cfg accordingly. Reference: store CP/RP events explanation etc, and axe parameters, BSC properties etc for each release. It will be used during comparison, e.g. correction comparison between site log and reference log. Resource: store pictures used in the programs Log: store temporary logs, e.g. debug, fault etc, pre-check logs. User are not suggested to store any site logs here. Example: store typical examples, user can play around it and get familiar with the program
Revision
Feedback
If you have any comment, suggestion or hit the fault, please feedback us. Go to menu HelpFeedback, dialog will show up. Input feedback and click button Send.
Maintenance
Michael He (guchezw)
We will setup a team to maintain it if necessary. Any suggestion and feedback is welcome!