Professional Documents
Culture Documents
Assignment#l
t
l.
A shaft is connected to a tube via a rubber insert that is glued to each member as shown. On cylindrical surfaces of the rubber connector concentric with the shaft, what is the shear stress as a function of r, the radius of cylindrical surface? What is the normal stress on cross-section ofthe
tube below the rubber connector?
tube
2000N
3mm
[:
rubber insert
50mm
2.
o*:7 units, or, =5,6u= - 4 ,x*y:0 ,x*,: -2,Tr"=0 Determine the stress vector on the plane passing through P whose unit normal components are
Giventhe state of stress at a point P:
213,
-213,l13. = -30 MN/m'. Determine the norm gles of 520 with the x-axis and 680
: : ou: 100 MN/m2,
orr:80
MN/
,r*:40
stress on a
whose
4.
Given the state of stress at a point: o* : p, ow : p, co= p, T*y : 8p, x*"= bp, xyz: cp where a, b, c are constants and p is some stress value. Find these constants so that the stressvector vanishes on the plane with unit normal N (14/3, 1/{3, 1/{3).
5.
Evaluate directly the invariants Jr, Jz, J:. Determine the principal stresses and the conesponding principal directions. Show that the diagonal form of the stress tensor yields the same values for the stress invariants.
For the state of stress in Problem no. 6, determine the maximum shear stress at that point and the direction of the plane on which it acts. Also find the value of the octahedral shear stress at that point.
ThestateofstressatapointPisgivenas:
oxx:0,oyy:p,6u:0,r*y:l,Tu:2,\,:lunits.
will
be zero. Give the unit
Determine p so that the traction-vector on some plane at the point P normal for this traction-free plane.
8.
Giventhe state of stress at apoint: o**= 10 units, orr: l0,ou: I , T*y:-6,Tu=0,),=0 Determine the principal deviatoric stresses. Also determine the deviatoric stress-invariants.