Professional Documents
Culture Documents
K F U P & M: Department of Mechanical Engineering
K F U P & M: Department of Mechanical Engineering
Static and fatigue failure criteria Analysis and design of bolted and welded joints Shaft design and analysis The student is also expected to be able to use SOLIDWORKS (or AutoCAD) to perform drawings of machine elements and systems (ME 210). Course Outline 1. Rolling contact bearings 2. Spur gears 3. Helical worm and bevel gears 4. Strength of Spur and Helical gears 5. Lubrication and journal bearings 6. Clutches, brakes, couplings and flywheels 7. Belts and chain drives Reading Assignments: Chapter Chapter 11 Chapter 13 Chapter 13 Chapter 14 Chapter 12 Chapter 16 Chapter 17 (# lectures) (6-7) (5-6) (3-4) (5-6) (8-9) (8-9) (4-5)
Omitted Material : Measurement of viscosity (p. 610); cross helical gears (689); sections 14.1, 14.2; 16.11 and 16.12. Evaluation: All Exams (including the Final) and Quizzes will be OPEN book 1. MAJOR and FINAL EXAMS: There will be two open book major exams containing open-ended problems. Major Exam 1: Saturday 24-3-07, 8-10 pm, Location: TBA. Major Exam 2: Sunday 29-4-07, 8-10 pm, Location: TBA. Final Exam: Monday 11-6-07, 7:30 am, Location: TBA. 2. ATTENDANCE: Attendance will be closely monitored, according to University regulations. HOMEWORKS: Homework will be assigned, collected and graded. Late submissions will NOT be accepted.
3.
4.
LAB ASSIGNMENTS: Laboratory sessions will be conducted in parallel with lectures and will include long projects. Your achievement and progress during class time will be graded by the end of each Lab. A final report for every project is also required and will be graded as well. When a new project is assigned the former one will be collected for grading. Late submissions will NOT be accepted.
5.
RELATIVE WEIGHTS AND GRADING: * * * * * * Homework & attendance Quizzes (4-6) Lab Projects Lab. participation Major Exams (2) Final Exam 7% 8% 15% 10% 30% (15% each) 30%
Student Learning Outcomes Objective 1 1. The student is expected to analyze mechanical systems and select the proper machine elements (bearings, gears, pulleys, belts, ) from commercial catalogs for a required application. Objective 2 2. The student is expected to be able to analyze proposed design solutions and suggest modifications and improvements. 3. The student should be able to execute original designs of machine elements. 4. The student should be able to produce design sketches and integrate the designed or selected elements into a working mechanical system. Objective 3 5. The student will be able to hold and lead efficient design team meetings 6. He is expected to write minutes Objective 4 7. The student will be able to implement design procedures to perform complete design projects individually or in a team. 8. The student is expected to communicate the implemented design ideas by performing production CAD drawings, writing technical reports and making oral presentations.