Professional Documents
Culture Documents
Transistor 2n3904 A PDF
Transistor 2n3904 A PDF
2N3903 2N3904*
*Motorola Preferred Device
1 2 3
MAXIMUM RATINGS
Rating Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD PD TJ, Tstg Value 40 60 6.0 200 625 5.0 1.5 12 55 to +150 Unit Vdc Vdc Vdc mAdc mW mW/C Watts mW/C C CASE 2904, STYLE 1 TO92 (TO226AA)
THERMAL CHARACTERISTICS(1)
Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Symbol RqJA RqJC Max 200 83.3 Unit C/W C/W
OFF CHARACTERISTICS
Collector Emitter Breakdown Voltage (2) (IC = 1.0 mAdc, IB = 0) Collector Base Breakdown Voltage (IC = 10 mAdc, IE = 0) Emitter Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Base Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) Collector Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) 1. Indicates Data in addition to JEDEC Requirements. 2. Pulse Test: Pulse Width 300 ms; Duty Cycle 2.0%. V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX 40 60 6.0 50 50 Vdc Vdc Vdc nAdc nAdc
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 2
Motorola SmallSignal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996
2N3903 2N3904
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued)
Characteristic Symbol Min Max Unit
ON CHARACTERISTICS
DC Current Gain(1) (IC = 0.1 mAdc, VCE = 1.0 Vdc) hFE 2N3903 2N3904 2N3903 2N3904 2N3903 2N3904 2N3903 2N3904 2N3903 2N3904 VCE(sat) VBE(sat) 0.65 0.85 0.95 0.2 0.3 Vdc 20 40 35 70 50 100 30 60 15 30 150 300 Vdc
Collector Emitter Saturation Voltage(1) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc Base Emitter Saturation Voltage(1) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc)
mmhos
dB
SWITCHING CHARACTERISTICS
Delay Time Rise Time Storage Time Fall Time 1. Pulse Test: Pulse Width (VCC = 3.0 Vdc, VBE = 0.5 Vdc, ( IC = 10 mAdc, IB1 = 1.0 mAdc) (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) 2N3903 2N3904 td tr ts tf 35 35 175 200 50 ns ns ns ns
2N3903 2N3904
DUTY CYCLE = 2% 300 ns +3 V +10.9 V 10 k 0 0.5 V < 1 ns CS < 4 pF* 9.1 V < 1 ns 1N916 CS < 4 pF* 275 10 < t1 < 500 ms DUTY CYCLE = 2% t1 +3 V +10.9 V 275 10 k
1.0 0.1
0.2 0.3
2.0 3.0
5.0 7.0 10
20 30 40
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
200
Figure 3. Capacitance
2N3903 2N3904
500 300 200 100 70 50 30 20 10 7 5 td @ VOB = 0 V 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 2.0 V 50 70 100 200 40 V 15 V 10 7 5 IC/IB = 10 500 300 200 t r, RISE TIME (ns) 100 70 50 30 20 VCC = 40 V IC/IB = 10
TIME (ns)
tr @ VCC = 3.0 V
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
200
100 70 50 30 20 10 7 5 IC/IB = 10
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
200
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
200
SOURCE RESISTANCE = 200 W IC = 1.0 mA SOURCE RESISTANCE = 200 W IC = 0.5 mA SOURCE RESISTANCE = 1.0 k IC = 50 mA
IC = 0.5 mA IC = 50 mA
f, FREQUENCY (kHz)
Figure 9.
Figure 10.
2N3903 2N3904
h PARAMETERS
(VCE = 10 Vdc, f = 1.0 kHz, TA = 25C)
300 hoe, OUTPUT ADMITTANCE (m mhos) 5.0 10 100 50
h fe , CURRENT GAIN
200
20 10 5
100 70 50
2 1
30
0.1
0.2
0.1
0.2
5.0
10
1.0 0.7 0.5 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 10
0.2
0.1
0.2
0.1 0.1
0.2
0.3
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
20
30
50
70
100
200
2N3903 2N3904
VCE, COLLECTOR EMITTER VOLTAGE (VOLTS) 1.0 TJ = 25C 0.8 IC = 1.0 mA 10 mA 30 mA 100 mA
0.6
0.4
0.2
0 0.01
0.02
0.03
0.05
0.07
0.1
0.2
0.3
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
1.2 TJ = 25C 1.0 V, VOLTAGE (VOLTS) 0.8 VBE @ VCE =1.0 V 0.6 0.4 VCE(sat) @ IC/IB =10 0.2 0 VBE(sat) @ IC/IB =10 COEFFICIENT (mV/ C)
1.0
2.0
5.0
10
20
50
100
200
20
40
60
80
100
120
140
160
180 200
2N3903 2N3904
PACKAGE DIMENSIONS
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 0.250 0.080 0.105 0.100 0.115 0.135 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 6.35 2.04 2.66 2.54 2.93 3.43
A R P
SEATING PLANE
L K D
X X G H V
1
C N N
SECTION XX
DIM A B C D F G H J K L N P R V
2N3903 2N3904
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405; Denver, Colorado 80217. 18004412447 MFAX: RMFAX0@email.sps.mot.com TOUCHTONE 6022446609 INTERNET: http://DesignNET.com
JAPAN: Nippon Motorola Ltd.; TatsumiSPDJLDC, 6F SeibuButsuryuCenter, 3142 Tatsumi KotoKu, Tokyo 135, Japan. 81335218315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298