Professional Documents
Culture Documents
Fixed Head Innerduct Pulling Eyes
Fixed Head Innerduct Pulling Eyes
Fixed Head Innerduct Pulling Eyes
Condux’s sole liability and the purchaser’s sole remedy for a failure of goods
under this limited warranty, and for any and all claims arising out of the
purchase and use of the goods, shall be limited to the repair or replacement of
the goods that do not conform to this warranty.
CONDUX
Condux International, Inc. • P.O. Box 247 • 145 Kingswood Road • Mankato, MN 56001
507-387-6576 • 800-533-2077 • FAX 507-387-1442
Internet: http://www.condux.com © Copyright 1996, Condux International, Inc.
Printed in USA ®
Literature Part Number: 08913398
Revision Number: 2.0 CONDUX
5 Blue Heron Drive Collegeville, PA 19426 (610) 831-5020 Fax: (610) 831-5012
www.comstarsupply.com
5 Blue Heron Drive
Comstar Supply, INC Collegeville, PA 19426
Think Cable... Think Comstar Phone: 610-831-5020
Fax: 610-831-5012
1-866-326-6782 www.comstarsupply.com
Installation Procedure
1. Select the proper size Pulling Eye from Table 1. Table 1 - Fixed Head Innerduct Pulling Eye
Innerduct
2. Tie the pull tape or line to the rear attachment point before Part Nominal I.D. Range
Number Size A to B C D E
inserting the Pulling Eye into the innerduct. 08913318 3
⁄4 .688 .813 1.125 .250 .500
7
08913319 ⁄8 .814 .938 1.250 .250 .500
3. Insert the Pulling Eye into the innerduct and hand-tighten it. 08913320 1 .939 1.063 1.125 .250 .500
Ensure that the innerduct’s inner diameter (I.D.) lays between 08913321 11⁄8 1.064 1.188 1.500 .375 .625
08913325 11⁄4 1.189 1.344 1.500 .375 .625
points A and B in Figure 1, and corresponds to dimensions A 08913323 17⁄16 1.345 1.500 1.875 .375 .625
and B in Table 1. 08913327 19⁄16 1.501 1.625 2.125 .375 .625
08913322 13⁄4 1.688 1.813 2.250 .375 .625
08913328 2 1.984 2.062 2.500 .375 .625
4. Tighten the Pulling Eye until its shoulder contacts the innerduct
08913329 21⁄8 2.063 2.187 2.500 .375 .625
or the innerduct begins to expand. Do not overtighten. Use any
of these tools:
!WARNING: Read and understand all procedure Figure 1 - Fixed Head Innerduct Pulling Eye
and safety instructions before using any Condux®
Innerduct Pulling Eye. Failure to do so may result
in personal injury or property damage. Save this
user’s guide for future reference. Do not overtighten the Pulling Eye in the
!ADVERTENCIA: Favor de leer y comprender todas innerduct. The innerduct could crack and the Pulling Eye will not
ADVERTENCIA
las instrucciones de operación y seguridad antes hold. Personal injury or property damage could result.
de usar el Condux® Innerduct Pulling Eye. Si Ud. no Use the correct Pulling Eye for the size of
Instrucciones
de Operación comprende las instrucciones favor de consultarle innerduct being pulled. Personal injury or property damage could
a su jefe. result.
!CAUTION: Wear personal protective equipment: Use a Condux Swivel with the Innerduct Pulling
hard hat, safety glasses, safety shoes, and leather Eyes. During the pull, the innerduct pulling eye could unscrew
work gloves. Failure to do this could result in itself from the innerduct. Personal injury or property damage
personal injury could result.
5 Blue Heron Drive Collegeville, PA 19426 (610) 831-5020 Fax: (610) 831-5012
www.comstarsupply.com