ABSTRACT: The main aim of the project is to control the speed and direction of the DC Motor. A motor is an electromechanical device, which converts electrical pulse into discrete mechanical movement. The shaft or spindle of motor is incremented in discrete steps when electrical command pulse is applied to it in the proper sequence. The motor rotation has several direct relationships with applied input pulses. The sequence of the applied pulses is directly related to the direction of motor shaft rotation. The speed of the motor shafts relation is directly related to the frequency of input pulses and the length of rotation is directly related to the number of input pulse. n this project we can vary the speed of motor by pressing the switches in the !" transmitter. n this particular project we are controlling the direction and speed. #ere we are using $%M technique we use duty cycle concept for controlling the speed. "or e&le if motor is given a supply for '( microseconds and it is not given a supply for )( microseconds then motor will move with speed '(* of its rated speed and li+ewise. !eceiver receives the controlling signals through !" receiver. And the direction control is done by using h, -ridge. This project finds its place in places where one wants to control the direction of DC motor in applications li+e robots, turbines etc. BLOCK DIAGRAM: RECEIVER SECTION: TRANSMITTER SECTION: POWER SUPPLY: HARDWARE COMPONENTS: Microcontroller MICRO COTROLLER UNIT Power Supply Motor Driver
MOTOR LCD Module RF RX Decod er ENCODE R RF TX Step Down Tran!or"e #rid$e Recti%er Filter Circuit Re$ulato r ection S&ITC' ES $ower supply .CD !" M/D0.1 M/T/! SOFTWARE TOOLS: 2eil 1&press $C- 3$ ADVANTAGES: Displays information on lcd display .ow cost implementation, mproves house safety, Digital indication of sensors, !eliable sensors, 3mall si4e, .ow $ower consumption APPLICATIONS: 5D03T!A. M/3T M/T/! 0356 $.AC13