The document reports a defect in a printed circuit board (PCB) where the edge was overcut and there is a scratch on resistor R1 in cavity 1 of a KAGA component. The PCB was produced in March 2013 with a date code of w1.
The document reports a defect in a printed circuit board (PCB) where the edge was overcut and there is a scratch on resistor R1 in cavity 1 of a KAGA component. The PCB was produced in March 2013 with a date code of w1.
The document reports a defect in a printed circuit board (PCB) where the edge was overcut and there is a scratch on resistor R1 in cavity 1 of a KAGA component. The PCB was produced in March 2013 with a date code of w1.