Equipment HUAWEI TECHNOLOGIES CO., LTD. OptiX PTN 950 OptiX PTN 950 PTN Series Multi-Service Packet Transport Equipment Product Overview With the rapid growth of packet services, the SDH transport network that is based on the rigid TDM channel and fxed granularity grooming encounters challenges in areas, such as service grooming and processing, bandwidth ef- fciency, and network scalability. To meet the trend of rapid-growing packet services in a transport network, Huawei presents a packet transport platform, that is, the OptiX PTN series, which are oriented to the all-IP evolution. The OptiX PTN 950 is a multi-service access box located at the hub node on the access layer of the transport network, and builds an end-to-end metropolitan packet transport network with other PTN series products. The PTN 950 focuses on the resource, cost, and service challenges for the carriers on the access layer during the mobile network evolution. The PTN 950 provides the customers with a leading mobile bearer solution in 2G/3G/ LTE era based on Huaweis industry-leading mobile bearer concept Any Media and the LTE-oriented packet technology platform. The PTN 950 provides multiple unique functions, such as any media access, any media clock transmission, high-preci- sion frequency and time synchronization, uniform processing technology for multiple services, integrated microwave fea- tures, and offoad function for the voice and data services. Combined with the easy and effcient network management system (NMS), the PTN 950 provides the customers with the best solution to reduce the TCO of the network construction, save the bandwidth cost, and improve the effciency of the deployment and operation and maintenance (O&M). Product Appearance The PTN 950 box is 2U in height, and provides two multi-function control board slot and six multi-service interface board slots. The multi-function control board (control/switching/clock processing) and the service interface board use the horizontal interpolation layout in the subrack. OptiX PTN 950 PTN Series Multi-Service Packet Transport Equipment Product Feature LTE-oriented all-IP architecture, compatible with multiple services, protecting the network investment The PTN 950 adopts an all-packet architecture to construct a platform for the uniform access and bearer of mul- tiple services (TDM/ATM/Ethernet/IP) in the all-IP era, improve the network fexibility and the transmission effciency, build a reliable carrier-class packet bearer network, and reduce the TCO of the network in terms of the structure. The PTN 950 is based on the MPLS/MPLS-TP series standards. It uses connection-oriented packet technology, features with high-bandwidth and low-delay, supports abundant layer 3 protocols and L2 VPN/L3 VPN features, and meets the re- quirements for the LTE-oriented evolution of bearer networks. Fast service activation under any environment based on the mult-media access (such as the fber, mi- crowave, and copper cable) The PTN 950 provides E1 (TDM/IMA) and FE/GE (optical/electrical) and channelized STM-1 interfaces at the client side (UNI), and channelized STM-1, FE/GE (optical/electrical), E1 (ML-PPP), microwave, and xDSL interfaces at the net- work side (NNI). In this case, adequate resources are available for fast network deployment. Especially, the PTN 950 integrates the microwave features, provides microwave interfaces, and achieves the optimal evolution cost and fast activation for the initial services of the network deployment. All-media clock solution solving the mobile bearer timing problem The PTN 950 provides the IEEE 1588v2 clock, synchronous Ethernet clock, adaptive clock recovery (ACR) clock, and network time reference (NTR) clock. It supports the microwave network to transmit the clock. The all-media clock solu- tion fully meets the clock requirements for multiple access media in various networks, solves the clock synchronization problem of mobile packet bearer networks, and reduces investment in network synchronization. Visual NMS, one-key service provision, and fault location in seconds, thus greatly improving the op- eration capability of packet networks Based on the high-performance transport T2000 NMS, the PTN 950 achieves visual graphics management, end-to-end one-key provision for BTS services, and fast fault location within 30 seconds based on the convenient service confguration fow and the perfect OAM and fault detection mechanism. The PTN 950 greatly improves the O&M effciency and enhances the manageability, operability, and maintainability of packet bearer networks. In addition, the NMS supports the uniform management of the PTN, microwave, MSTP, WDM equipment. Thus, the PTN 950 effectively avoids the delimitation dead zone between multiple NMSs and greatly improves the network operation capability. The T2000 NMS can be smoothly up- graded to the uniform U2000 NMS of new-generation network products in the future. Multiple designs, greatly facilitating the debugging and maintenance and saving the cost of the net- work construction and O&M The PTN 950 V1R1 exempts the customer from the necessity of feld software debugging and enables one-time de- ployment by loading confgurations through CF card, remote deployment or debugging through wireless modems. The PTN 950 V1R1 supports scattered loading and concurrent activation based on software upgrade, and can upgrade 400 NEs per day. In addition, the PTN 950 V1R1 greatly reduces the O&M cost by combining multiple maintenance-free de- signs, such as the air flter and automatic recovery for replacement of faulty boards. Properties PTN 950 Physical Parameters Subrack dimensions (mm) 442 (W) x 220 (D) x 88.1 (H) Subrack weight (kg) Empty: 2.78 (no board housed) Full (all slots housing boards): 8.42 Working voltage (V) 38.4 to 72.0 Typical Confguration Power (W) 90 (excluding microwaves) 203 (including microwaves) Maximum current (A) 6 (excluding microwaves) 14.3 (including microwaves) OptiX PTN 950 PTN Series Multi-Service Packet Transport Equipment Product Specifcations Typical application of the PTN 950 in metropolitan packet transport network Typical Application Scenario The preceding fgure shows the typical application of the PTN 950 in a network. The PTN 950 is deployed at the hub node on the access layer of the metropolitan packet transport network and it can also be deployed at the large- capacity access site as an end device to achieve the multi-service access and build an effcient bearer network in the all-IP era. BTS N*E1 E1 PTN 910 FE/GE FE/GE FE/GE FE/GE FE/GE PTN910 PTN950 PTN1900 PTN950 PTN950 PTN950 PTN910 DSLAM FE/GE E1 BSC RNC FE/GE/ ATM STM-1
T D M
E 1 c h - S T M - 1 GE/10GE Router Router SDH Leased Line IP/MPLS Metro PTN Moblie Bankhaul FE/GE x D S L NB/eNB NB/eNB NB/eNB Properties PTN 950 Maximum power consumption (W) 218 (excluding microwaves) 495 (including microwaves) System Specifcation Parameters Capacity Capacity: 8 Gbit/s (single-direction); forwarding performance: 12 Mpps (single-direction) Multi-function control board slot 2 Service slot 6 Interface type FE (optical/electrical), GE (optical), Smart/E1 (ML-PPP, IMA, and CES), ADSL2+, G.SHDSL, and microwave, Channelized STM-1 FE/subrack 48 SFP (optical, 100 BASE-FX)/48 RJ-45 (electrical, 100 BASE-T) GE/subrack 8 SFP (optical, 1000 BASE-SX/1000 BASE-LX) Smart E1/subrack 96 (75 ohm/120 ohm) Microwave intermediate frequency interface/subrack 6 ADSL2+/subrack 12 G.SHDSL/subrack 24 chSTM-1/ subrack 12 (*) Synchronization Specifcation Parameters Clock synchronization Two channels of synchronous external clock inputs/outputs Time (phase) synchronization IEEE 1588v2 clock Ethernet clock synchronization ACR clock NTR clock Protection Specifcation Parameters Service protection MPLS Tunnel 1+1 and 1:1 LSP (Label Switching Path) protection APS protection protocol MPLS TE (Traffc Engineering)-FRR(Fast Reroute) Offoad Protection (separating voice &.date) Link protection IMA (Inverse multiplexing over ATM )group protection for E1 ML-PPP group protection for E1 G.SHDSL line binding protection (in EFM mode) LAG (Link Aggregation Group) protection STM-N linear multiplex section protection (LMSP) OptiX PTN 950 PTN Series Multi-Service Packet Transport Equipment Properties PTN 950 Clock protection Supported 1+1 system clock &. multi-channel clock output Power supply protection Supported 1+1 input &. module protection Software Feature Parameters MPLS RSVP-TE serving as the LSP signaling LDP serving as the PW signalingI Static LSP confguration Routing protocol Static routing and routing protocols, such as, RIPv2, OSPFv4, IS-IS, and BGPv4 QoS DiffServ mode based on traffc classifcation Simple traffc classifcation, complex traffc classifcation, and per hop behavior (PHB) PQ scheduling priority Flexible mappings of ATM QoS priorities Committed access rate of ATM services Weighted fair queuing (WFQ) Tail drop and weighted random early detection (WRED) Eight priority queues Shaping base on port scheduling priority Layer 2 features IEEE 802.1 q and IEEE 802.1 ad private line VLAN Switch L2VPN/L3VPN L2 VPN E-Line Routing protocols such as the MPBGP, RIPv2, OSPFv4, and ISIS. The LDP over TE, VPLS/H-VPLS, and VPN policy routing Q-in-Q MPLS/BGP L3 VPN (*) chSTM-1: The board supports the1+1 protection on the port. OptiX PTN 950 PTN Series Multi-Service Packet Transport Equipment Copyright Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. NO WARRANTY THE CONTENTS OF THIS DOCUMENT ARE FOR INFORMATION PURPOSE ONLY, AND PROVIDED AS IS. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO CONTENTS OF THIS DOCUMENT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS ARISING OUT OF OR IN CONNECTION WITH ANY USE OF THIS DOCUMENT. Trademark Notice , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Version No.: M3-013030801-20090408-C-2.0 www.huawei.com