Professional Documents
Culture Documents
2SK2842
Chopper Regulator, DCDC Converter and Motor Drive
Applications
l Low drainsource ON resistance
Unit: mm
Symbol
Rating
Unit
Drainsource voltage
VDSS
500
VDGR
500
Gatesource voltage
VGSS
30
(Note 1)
ID
12
Pulse (Note 1)
IDP
48
PD
40
EAS
364
mJ
Avalanche current
IAR
12
EAR
4.0
mJ
Channel temperature
Tch
150
Tstg
55~150
Symbol
Max
Unit
Rth (chc)
3.125
C / W
Rth (cha)
62.5
C / W
Drain current
DC
JEDEC
JEITA
TOSHIBA
SC-67
2-10R1B
Thermal Characteristics
Characteristics
Note 1: Please use devices on condition that the channel temperature is below 150C.
Note 2: VDD = 90 V, Tch = 25C (initial), L = 4.3 mH, RG = 25 , IAR = 12 A
Note 3: Repetitive rating; Pulse width limited by maximum channel temperature.
This transistor is an electrostatic sensitive device.
Please handle with caution.
2002-09-02
2SK2842
Electrical Characteristics (Ta = 25C)
Characteristics
Gate leakage current
Gatesource breakdown voltage
Drain cutoff current
Drainsource breakdown
voltage
Gate threshold voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
IGSS
VGS = 25 V, VDS = 0 V
10
V (BR) GSS
IG = 10 A, VDS = 0 V
30
IDSS
100
V (BR) DSS
ID = 10 mA, VGS = 0 V
500
Vth
VDS = 10 V, ID = 1 mA
2.0
4.0
Drainsource ON resistance
RDS (ON)
VGS = 10 V, ID = 6 A
0.4
0.52
|Yfs|
VDS = 10 V, ID = 6 A
4.0
9.0
2040
200
Input capacitance
Ciss
Crss
Output capacitance
Coss
640
tr
22
ton
58
Rise time
Turnon time
Switching time
pF
ns
Fall time
tf
36
Turnoff time
toff
180
Qg
45
Gatesource charge
Qgs
25
Qgd
20
nC
Symbol
Test Condition
Min
Typ.
Max
Unit
IDR
12
IDRP
48
VDSF
IDR = 12 A, VGS = 0 V
1.7
trr
1200
ns
Qrr
IDR = 12 A, VGS = 0 V
dIDR / dt = 100 A / s
16
Marking
2002-09-02
2SK2842
2002-09-02
2SK2842
2002-09-02
2SK2842
RG = 25
VDD = 90 V, L = 4.3 mH
E AS =
B VDSS
1
L I2
2
B
V
DD
VDSS
2002-09-02
2SK2842
000707EAA
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability
Handbook etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customers own risk.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
The information contained herein is subject to change without notice.
2002-09-02