Professional Documents
Culture Documents
Find For 0 If The Circuit Is in A Steady State at 0
Find For 0 If The Circuit Is in A Steady State at 0
5. The current through a 0.1-H inductor is =105A. Find the voltage across the inductor and
the energy stored in it.
6. Under dc conditions, find: (a) i, , and , (b) the energy stored in the capacitor and inductor.
7. If the circuit is at steady state, find, , , and i at =0, =0+, = and for >0.
8. What is the energy stored by the inductor in the circuit shown below if R = 20 ? If R = 90
find its time constant.
9. A switch closing connects in series a 10-V source, an 8.2 resistor, and a 1.2-H inductor.
How long does the current take to reach its maximum value, and what is this value?
10. In the circuit shown below, the switch is thrown at =0, find the indicated currents at =0,
=0+ and at = . Determine also i1 and i2 for >0.
12. A switch closing at =0 connects a 20-mH inductor to a 40-V source that has 10 of internal
resistance. Find the inductor voltage and current for 0.
13. A coil for a relay has a resistance of 20 and an inductance of 1.2 H. The relay requires 300
mA to operate. How soon will the relay operate after a 20-V source with 5 of internal
resistance is applied to the coil?
14. A switch closing at =0 connects a 100-V source with a 15- internal resistance to a coil that
has 200 mH of inductance and 5 of internal. Find the coil voltage for t > 0.