You are on page 1of 3

EE100 Summer 2013

Homework 3
Due July 18, 2013
1. Solve the steady-state values of the labeled currents and voltages for the following circuits:

2. For the following circuit, assume that Vs = 15 V, R1 = 10 , R2 = 100 , and L = 0.1 H.


a. What is the value of the time constant (after the switch opens)?
b. What is the maximum magnitude of v(t)?
c. How does the maximum magnitude of v(t) compare to the source voltage?
d. Find the time t at which v(t) is one-half of its value immediately after the switch opens.

3. Solve for the current in the following circuit. The initial voltage on the capacitor is vC(0) = 0.

4. In the following circuit, consider R = 25 .


a. Compute the undamped resonant frequency, the damping coefficient, and the damping
ratio.
b. The initial conditions are v(0 ) = 0 and iL(0 ) = 0. Show that this requires
that v(0+) = 106 V/s.
c. Find the particular solution for v(t).
d. Find the general solution for v(t), including the numerical values of all parameters.

5. P4.29

6. In the following circuit:

You might also like