Professional Documents
Culture Documents
3/16/05
1:05 PM
Page 1
The V-Plough is designed to deflect dirt and debris from the upper surface of
the return belt before the nip position. The scraper is mounted to the conveyor
stringers ahead of the tail pulley or other nip location. In cases of severe
contamination and/or an inclined belt situation, the centre point mounting is
spring loaded to provide a constant positive pressure on the plough, thus
ensuring continuous belt contact and optimum cleaning.
system for:
(1) Greatly simplified installation.
(2) Maximum flexibility to accommodate
changing lateral belt angles.
(3) Patented spring-loaded rear mount
ensures constant positive pressure on belt,
irrespective of belt angle.
(4) Positive pressure of plough on belt
surface.
installation.
3/16/05
1:06 PM
Page 2
SS32 V-Plough
Patented
H
STRINGER CENTER
OR
E
A
SCRAPED BELT WIDTH
Note: Scorpio reserves the right to any modifications / changes without notification
B/W
A
C
B
D
E
F
G
H
J
c 10/03
900
750
600
635
784
934
100 FOR 100 BLADE
40
900
1100
1280
465
571
679
525
655
786
MIN 160 - MAX 350
600
40
1050
1038
1200
1237
1350
1386
1400
788
920
1600
895
1050
1750
1001
1180
980
1500
1600
1800
1535
1684
1833
150 FOR 150 BLADE
60
1900
2050
2200
1108
1214
1321
1310
1440
1570
MIN 210 - MAX 500
1300
60
2100
2139
2250
2283
2400
2433
2480
1536
1832
2630
1642
1962
2790
1749
2093
1550