Professional Documents
Culture Documents
Pages
Pages
11-Dec-14
OM-4735-B01
MATERIAL SPECIFICATI ON
The following is the list of the material standards and specifications for which the building components have been
designed:
MATERIAL SPECIFICATIONS
No.
1
Structural Components
Built-up Sections
Hot Rolled
Sections
Fy = 345 N/mm2
Tubes
Fy = 317 N/mm2
I-sections
Fy = 345 N/mm2
Channels
Fy = 345 N/mm2
Fy = 340 N/mm2
Fy = 340 N/mm2
Aluzinc coated
steel Bare &
Pre-painted
Aluminum Mill
ASTM B 209 Grade AA 3105, Temper: H16
finish & PreFu =170 N/mm2 (min.)
painted
Mezzanine Decking Panels
Diagonal X
Bracing
Strength
Sheeting Panels
Material Specifications
Fy = 145 N/mm2
Fy = 340 N/mm2
Cable
Pu = 120 kN
Rods
Fy = 250 N/mm2
HR Angles
Fy = 345 N/mm2
Anchor Bolts
Fy = 250 N/mm2
Fy = 660 N/mm2
Sag Rods
Fy = 250 N/mm2
Fy = Yield Strength.
Important Note:Subject to market conditions and material availability, Mammut reserves the right to substitute equivalent or
better material.
Sheet 5 of 254
Version 1.19