Professional Documents
Culture Documents
CATIA v5. Aplicatii in Inginerie Mecanica English Cax 2012
CATIA v5. Aplicatii in Inginerie Mecanica English Cax 2012
CATIA V5
Basic Training
Preface
The present script includes an introduction of the main features in the 3D design
software package Catia V5. Beside the basic tools of 3D design, a number of
exercises and examples point to different construction strategies in several
applications. In addition to the primary functions, methods for the generation of solid
components and assemblings are explained and executed by use of different
examples.
Training targets:
x
x
x
x
x
Sketch mode
Basic part design
Enhanced features of part design
Assembly design and product structure
Generating drawings
The script is based on Catia V5 Release 16 and will be updated continuously. To keep
the paper up to date and to fulfill the requirements on the Catia V5 education at a high
level, questions, critics and new inputs are sincerely welcome. Please write an email
to:
DI Michael Lang: michael.lang@ivt.tugraz.at
Table of contents
1
Introduction ..........................................................................................7
1.1.
Start.............................................................................................................. 11
File ............................................................................................................... 11
Edit ............................................................................................................... 12
View ............................................................................................................. 12
Insert ............................................................................................................ 14
Tools ............................................................................................................ 14
Window ........................................................................................................ 15
Help .............................................................................................................. 16
4.21
4.22
Apply Material............................................................................................... 23
Measure ....................................................................................................... 23
1 Introduction
The 3D CAD system CATIA V5 was introduced in 1999 by Dassault Systems.
Replacing CATIA V4, it represented a completely new design tool showing
fundamental differences to its predecessor.
The user interface, now featuring MS Windows layout, allows an easy integration of
common software packages such as MS Office, several graphic programs or SAP-R3
products (depending on the IT environment) and others.
Figure 3: Selection of
Workbenches
1.1.
Shape:
Surface based design, Free formed surfaces
Digital Mockup
Digital Mockup, Packaging and Assembly Simulation
Machining:
Manufacturing simulation and control tool for numerically
controlled machines
AEC Plant:
Manufacturing and production planning, Optimization of
production lines
Infrastructure:
Interfaces, Comprehensive work with other software packages,
Data transfer
8
Menu bar with pull down menus for the access of CATIA features
Workbench symbol for quick switching between the workbenches
Standard toolbar containing common features such as Open, Close, Print, Cut
and Paste
The open window contains the model field and the specification tree
Compass, used for changing the view and moving objects
Status bar with instructions and prompts
The workbench toolbar displays all the features, that can be used within a
specific workbench
9
Press and hold the middle mouse button and move the mouse.
Rotate ...
Press and hold the middle mouse button. While still holding it,
press and hold the left (or right) button and move the mouse.
Zooming ...
Press and hold the middle mouse button. While still holding it,
press the left (or right) button once and move the mouse.
Press and hold the left mouse button while the mouse
points at a branch of the tree, and move the mouse.
Zooming ...
Figure 5: Options
10
3 An excerpt of menus
This chapter explains a selection of the most important menu bars of the workbench
Part Design. A couple of basic features (Start, File, Edit etc.) are also available in other
workbenches, other menu bars differ depending on the specific demands of the modes.
The following chapters give a deeper understanding of single menu bars in different
workbenches.
3.1 Start
The Start menu contains the
workbenches defined previously.
The pull down menu is used to
switch from one workspace to
the other. Additionally, the
recently opened, the active and
the previous open file names are
shown. By clicking on the
names, the files can be
activated.
3.2 File
File comprises all the administrative functions for opening, saving or printing files. In
addition, the recently used files are displayed.
11
3.3 Edit
Some functions frequently needed during the design process such as Copy, Paste, Cut
or Delete can be found in the menu Edit.
The feature Update is used to refresh the construction. Undo and Repeat are very
useful commands to move one design step backwards or forwards again.
Search can find elements within the active document.
The commands Selection Sets, Selection Sets Edition and Find Owning Selection Sets
enable the definition and the recall of selection criteria.
To edit document connections, Links is used.
The definition or changing of component properties happens through Properties.
Scan or Define In Work Object makes the navigation between elements and the
definition of In Work-objects possible. The following construction steps are executed on
this (defined) object.
3.4 View
The menu Toolbars allows the configuration of the toolbar visualisation on the screen.
By clicking on a single toolbar name, the respective toolbar can be activated or
deactivated.
The Commands List is used to directly access commands.
12
If different predefined views should be created with the possibility to quickly switch
between them, the command Named Views can be useful.
Render Style enables the adjustment of visualization settings. Apart from standard
settings, user defined render styles can be configured.
The menu Navigation Mode is used to choose from different types of part movement on
the screen:
Fly: =>
Translative and rotatory movement
Walk: =>
Translative movement within an predefined plane
The features Lighting and Depth Effect affect the display style of shaded objects.
A base plane can be inserted via Ground.
13
3.5 Insert
The Insert menu contains specific commands for each workbench. Most of these
features can be activated via the toolbars as well. A detailed description of the main
commands is carried out in the specific modes Part Design and Drafting.
3.6 Tools
The features contained in Tools control the settings and user defined features.
Additionally, several workbench specific tools are available.
Formula ...
Image ...
Macro ...
Customize ...
Visualization filters ... Layers (e.g. design spaces) can be switched visible / invisible.
Options ...
Standards ...
Conferencing ...
3.7 Window
Opened windows can be arranged and new windows can be opened with the Window
menu. Furthermore the open files are displayed there.
15
3.8 Help
A contextual help (Whats This?), explaining the commands instantly and a help menu
(CATIA V5 Help) which requires special installation, are provided by CATIA V5.
New ...
Open ...
Save ...
Print ...
Prints the active document on the default printer, using the default
printer settings
Cut ...
Copy ...
Paste ...
Redo ...
4.2 Knowledge
Formula ...
Check Analysis Toolbox The check analysis tool allows users to show and fix all
broken checks to validate the design and generate reports
Design Table ...
Create and edit design tables and laws to create and edit
component families
4.3 Workbench
Workbench ...
Graphical adjustments such as fill colour, zooming, line thickness, line style, point style
and layer setting can be done.
17
4.5 View
Fly ...
Pan ...
Rotate ...
Zoom In...
Zooms in in increments
Create Multi-View
Views ...
View Modes:
Shading
18
4.6 Select
The Select menu offers several selection tools. Apart
from a single selection, different trap selections can be
chosen.
4.7 Sketcher
The sketch mode is used to create 2D contours as a basis for the
following 3D modeling. A parameterization of the sketches is not
mandatory. A detailed description of the sketcher follows in
chapter 5.
Pad ...
Pocket ...
Shaft / Groove ... Shaft creates a rotating solid from a profile and an
axis of revolution. A Groove is a shaft that is being
removed from an existing geometry
Hole ...
Rib / Slot ... Creates a rib or a slot (i.e. a removed rib) by sweeping a
profile along a center curve
Stiffener ...
Creates a stiffener
19
Line ...
Plane ...
4.12 Constraints
Constraints Defined in Dialog Box ...
Constraint ...
Creates a constraint
20
Mirror ...
Translation ...
Rotation ...
Symmetry ...
Scaling ...
4.15 Insert
Insert is used to insert a new body or geometrical set in the specification tree.
The new element is inserted beneath the active element or into a specified
component.
21
Add ...
Remove ...
Intersect ...
Find Owning Selection Sets Find all selection sets including the
selected element
4.18 Tools
4.19 Annotations
Text with Leader ...
Flag Note with Leader ... Creates a flag note with a leader line and URL
support.
22
4.20 Analysis
The Analysis features support a construction check regarding the producibility.
Draft Analysis ...
Analysis of drafts
Tap - Thread Analysis ... Analyzes all threads and taps of a component
4.22 Measure
Measure Between ...
23
The individual setup of the desktop is done through Tools / Options (in the menu bar).
The selection of the toolbars happens via the menu View / Toolbars.
24
5.2.1 Sketcher
5.2.2 Profile
The menu Profile provides features for the creation of basic geometrical elements.
While not being parameterized, the contour is displayed as white lines.
Profile ...
-Rectangle
-Orientated Rectangle
-Parallelogram
-Elongated Hole
-Cylindrical Elongated Hole
-Keyhole Profile
-Hexagon
-Centered Rectangle
-Centered Parallelogram
Circle ...
-Circle
-Three Point Circle
-Circle Using Coordinates
-Tri-Tangent Circle
-Three Point Arc
-Three Point Arc Starting with Limits
-Arc
Spline ...
Conic ...
-Ellipse
-Parabola by Focus
-Hyperbola by Focus
-Conic
Line ...
Creates Lines:
-Line
-Infinite Line
-Bi-Tangent Line
-Bisecting Line
-Line Normal To Curve
Axis ...
Point ...
-Point by Clicking
-Point by Using Coordinates
-Equidistant Points
-Intersection Point
-Projection Point
5.2.3 Operation
Corner ...
Chamfer ...
Relimitations ...
-Trim
-Break
-Quick Trim
-Close
-Complement
26
Transformation
Transformation components:
-Mirror
-Symmetry
-Translate
-Rotate
-Scale
-Offset
3D Geometry ...
-Project 3D Elements
-Intersect 3D Elements
-Project 3D Silhouette Edges
5.2.4 Constraint
The toolbar Constraint contains features for the assignment of constraints.
Constraints Defined in Dialog Box ... Creates constraints checked in a
dialog box
Constraint ...
-Constraint
-Contact Constraint
Constrained Geometry ...
Creates Constraints:
-Fix together
-Auto Constraint
Animate Constraint ...
Edit Multi-Constraint
Grid ...
Displays a grid
27
Snap to Point
5.2.6 Tools
Create Datum
Output Feature
Profile Feature
2D Analysis Tools
28
1. File / New
29
4. Create a sketch
Using
the
feature
Line
(contained in the Profile menu),
a hexagon can be drawn.
Double clicking the icon
activates the repetition mode.
The Snap to Point mode allows
to catch the ending point of the
previous lines. When the line
happens to be nearly vertical or
horizontal, a corresponding
constraint is established by
activating the Snap to Point
mode. The repetition mode of
the Line feature is deactivated
by clicking on the icon once
more. Another way of creating
curves containing lines (and
circles) is provided by the
feature Profile.
Figure 18 shows the input window of a vertical line. Similar windows exist for all basic
geometrical elements in the sketch mode.
30
31
One possibility to dimension the hexagon is shown in Figure 21, but several other
ways are possible. The dimensions shown in Figure 19 show the values of the first
draft; the dimension values can be changed by double clicking the values, e.g.:
Figure 20: After confirming the modification, CATIA is changing the geometry according to the
new value.
The hexagon has to be constrained as well as its position in the working space. The
dimensioning of the sketch is complete when all elements turn green. White lines are
not completely parameterized, purple lines are overconstrained.
32
33
The pop up window shows all necessary inputs for the particular constraint. This
feature can be useful especially for the modification of dimensions. Some definition
windows are shown in Figure 24. They are all similar: The specifications of the
geometrical elements are displayed and can be modified.
34
35
Sketch tools is used to set miscellaneous helpful adjustments. Grid displays gridlines;
the grid size can be adjusted in the menu Tools / Options / Mechanical Design /
Sketcher / Grid. Snap to Point snaps points to the nearest intersection points of the
grid.
The next feature switches to the construction
mode. When Construction / Standard Element is
activated, from now the generated geometry is
being defined as construction elements and can
not be used in the sketch mode. Elements can
also be defined as construction elements ex post
by simply selecting them and pressing the
Construction / Standard Element button. Another
possibility to switch between the two modes is to
open the definition box of the respective element
and activate / deactivate Construction Element.
Figure 27: Turning a point to a
Construction Element
36
Some additional options supporting the creation of geometry are contained in Sketch
tools. One of them is activated, if the feature Profile is used: The type of the profile
continuation can be chosen (Line, Tangent Arc, Three Point Arc).
Sketch Analysis
Sketch Analysis enables an easy check
of the sketch concerning open contours,
interfering points or overlaps. This tool
can be used for revising and editing the
sketch.
37
38
39
undimensioned
radii: 12mm
Pad
Shaft
Rib
40
The Limit Type specifies the definition of the pad length. One possibility is to use
limiting planes or surfaces. This example uses the limiting type Dimension, the length
is set 20mm. Sketch 1 is selected as a profile.
- Annotation: The sketch has to contain a closed contour to create a standard pad.
The feature Mirrored extent enables the extension of the body in both directions,
Reverse Direction switches the extension direction.
Selecting More activates an extended definition window with the following options:
Second Limit:
Extension into the other
direction
Direction:
Select the extension
direction (e. g. by selecting a line)
Thin Pad (only available
when Thick is activated):
Creates a body with a
defined thickness on
both sides of the profile.
The complete body is
displayed according the
Figure 36: Extended Pad definiton box
input values.
The hexagonally shaped solid is based on the sketch and the values of the pad
definition. To modify properties, the solid can be selected (either in the model area or
Pad 1 in the specification tree). The definition box should appear; it also offers the
modification of the according
sketch (
).
41
As a result, the hexagonal body is called First Try in the specification tree and is
turned green.
The part can be saved using File / Save as.
42
After leaving the sketch mode and selecting the feature Shaft, a definition
box for the shaft appears.
43
The sketch is used as Profile, the rotation axis is the vertical line of the coordinate
system. The First Angle is set to 360 degrees, the Second Angle is zero degree.
44
After creating both sketches in two perpendicular planes, the feature Rib can be
selected.
45
Groove
Hole
The manipulation features can, similar to the 3D basic features, base on sketches
created in the sketch mode. Only the function Hole allows the definition of parameters
within the dialog box; the positioning of the hole is done with a sketch that can be
activated within the box.
46
Example 7: Plate
Intention: Application of the features Pocket, Groove, Hole
As a basis solid, a Pad measuring 80 x 110 x
30mm has to be generated.
All
geometrical
elements should be
constrained clearly
and
without
ambiguity.
- Annotation:
It is valid to use
edges,
wireframe
elements or other
elements
outside
the
sketch
as
references for the
sketch. Figure 50
shows the sketch
using the edges of
the
pad
as
references for different dimensions.
Figure 50: Sketch for the Pocket
47
After picking the button Pocket, a definition box appears. The Depth is set to 20mm,
the Profile is the sketch created before.
Selecting More opens an extended
Pocket definition box providing detailed
options for limitations, shape and
extension of the pocket.
48
based on, are displayed. Any modification of the Pocket can be carried out by simply
selecting a face of the Pocket, or by selecting the Pocket within the specification tree.
A definition window of Pocket.1 appears and modifications can be performed.
49
The desired
Hole
measures
10mm
(Diameter) x 10mm
(Depth).
The
drill
ought
to
be an
ordinary
one
(VBottom) with an apical
angle of 120. The
Hole ought to be
perpendicular to the
surface.
Other
options
for
defining the Hole are
shown subsequently.
50
51
Extension:
The following settings are available:
Type of Relimitation of Hole
Limit ( Blind, Up to Next, Up to
Last, Up to Plane, Up to
Surface)
Dimensions of the Hole.
Direction (normal to the surface
or along an axis)
Location of the Hole, defined by
a Positioning Sketch.
Bottom of the Hole (Flat or
V-Bottom)
Figure 61: Hole Definition, Extension
Type:
This menu allows the definition of a
counterbore;
several
types
are
possible. If chosen, the required
parameters for the type are prompted.
Thread Definition:
To create a Thread all parameters
have to be defined using the according
window. The core diameter is
calculated by CATIA (in case of
standard theads).
When generating a 2D Drawing, the
Thread specifications in the drawing
can be created by CATIA itself.
52
Measure Inertia
Beside the common
measure function for
values and distances,
the icon Measure Inertia
activates a number of
measurings, such as
volume, mass, area or
inertia using the set
material
properties.
Several options can be
set, e.g. an axis or a
coordinate system for
the inertia calculation,
can be selected.
53
Using Search
The feature Edit /
Search can be useful
when
looking
for
specific
elements.
There
are
several
properties to search
for, such as Color,
Type or Name. When
using Name, it is
possible to search for
elements other than
geometrical items, e.g.
Constraints.
54
Example 8: Clevis
Intention: Design of simple solid bodies
Example 9: Lever
Intention: Design of simple solid bodies
55
56
57
58
The submenu Fillets provides features for creating fillets with variable radii, between
two faces or defined by three tangent faces.
The
angle
piece has to
be
supplied
with fillets with
R=10mm on
the
inner
edges and a
fillet
with
R=5mm on the
vertical edge.
The
Specification Tree
shows
the
newly created
Fillets beneath
the Pads.
Similar Fillets can be generated by use of the function Variable Radius Fillet. The
according radii have to be defined in a dialog box.
59
60
61
62
63
Feature Thickness
Thickness adds or
removes thicknesses
on one (or more)
faces, resulting in
new
boundaries
parallel to the original
body boundaries (e.
g.
for
creating
allowances). Different
faces can be defined
with
different
thicknesses.
Modifications
of
dimension figures are
carried out by simply
clicking on them.
Feature Thread
The feature Thread / Tap resembles the subfeature of Thread definition within the Hole menu.
Unlike the latter, this feature allows the creation
of taps. The Threads / Taps are specified by
defining the Lateral Face, Thread Depth and the
nominal Thread Diameter.
64
65
66
Mirror:
This symmetry
function
is
duplicating the
original mirrored
element. It can
be
used
to
mirror
either
bodies or parts
of
bodies.
Therefore, the
geometry should
be set active (or
marked) in the
specification
tree
BEFORE
selecting
the
Mirror button.
67
Patterns:
The Pattern features (Rectangular Pattern, Circular
Pattern and User Pattern) enable the duplication of
design elements using special positioning definitions.
The Rectangular Pattern Definition requires two
translation directions, the according Instance number
and the Spacing. Parameters offers several options
for the input.
The Reference Element defines the translation
direction, the Object to Pattern is the element that is
duplicated.
The second direction is defined in a similar way.
Scaling:
Figure 102: User Pattern Definition
68
69
70
When clicking on an element with the right mouse button and picking Properties, user
defined setting can be adjusted, such as renaming the design elements, changing the
graphic representation or retrieving the object status.
adding
subtracting or
intersecting
independent bodies.
72
- Annotation: CATIA regards the PartBody as the first basic body. It can be
modified using construction features, but the PartBody cannot be removed. Therefore
it is important to consider the structure of the specification tree, especially for more
complex parts.
The PartBody can be changed: Select the Body that should be defined the new
PartBody with the right mouse button and select Body.x / Change Part Body.
The following example is going to show how to use Boolean Operations.
73
The Specification Tree shows that the part is built from three bodies:
Outer Contour
Inner Contour
Piston-Pin Bearing Support
The Outer Contour represents the
outline of the piston. It can be
created using the feature Shaft.
The inner contour consists of two
bodies. The body Inner Contour
consists of a Shaft, the Piston-Pin
Bearing Support is a Pad.
The body Piston-Pin Bearing
Support is being removed from
the Inner Contour using the
Boolean Operation Remove. It is
commended that the Fillets be
created as soon as possible, i.e.
just after the Boolean Operation.
75
76
Figure 123:
Specification Tree
77
78
A Part consisting of several Bodies, connected e.g. via Boolean Operations, can be
modified by accessing the Specification Tree that offers a well structured overview of
the build-up. Figure 127 shows the Specification Tree of a piston. The part is
structured in a basic Body (Outer Contour) and a removed Body (Inner Contour). The
two Bodies are connected with the Boolean Operation Remove.3.
After activating the removed Body (Inner Contour), only the elements of the active
branch of the tree are displayed. The buildup of the Inner Contour (it consists of two
Bodies as well) can be seen. Activating the Part step by step in the Specification Tree
offers a helpful overview of the construction and enables quick comprehension of the
structure and easy modification of parameters when editing the part. CATIA V4 used
the feature Smart Solid to analyse the Specification Tree and the Part structure. In
CATIA V5, this feature has been integrated in the Specification Tree, offering the
possibility to set single elements In Work.
- Annotation: The display mode of elements that are activated in the tree can be set
by use of the button Only Current Body in the Tools toolbar. If this option is activated,
only the active body is displayed; otherwise all bodies are visible. This option can also
be set in the pull down menu Tools / Options / Infrastructure / Part Infrastructure /
Display / Display in Geometry Area / Only the current operated Solid or Only the
current Body.
- Annotation: Specific component adjustments can be set by clicking on the
Specification Tree with the right mouse button. The Properties menu allows several
options, such as switching elements from / to the noshown space (Hide / Show),
rename an element or change its appearance. (See chapter 5.3 Structure of the
specification tree of a sketch.)
- Annotation: Objects can be moved within the Specification Tree by picking them
with the right mouse button and selecting Object X / Reorder. The dependencies of the
moved objects have to be considered.
79
80
81
9.1.2 Constraints
The four constraints Coincidence, Contact, Offset and Angle are used to position
components to each other. To fix the Product in space, one component can be fixed
using Fix Component.
Coincidence Constraint
Manipulation ...
83
9.1.5 Update
The set constraints are realized in the Product after Updating the Product or
parts of it.
Parts that have been manipulated manually without consideration of
constraints are reset to the position defined by the constraints when updated.
After having modified the specification tree, the Product has to be updated as well.
- Annotation: Similar to other design modes (Part Design, Drafting), the properties
menu, activated by right-clicking the Specification Tree, contains helpful features such
as Hide / Show and other component specific definitions.
84
85
9.3.
The Desk shows all links of an assembly, as there are links to Components, Design
Tables or external objects that have been inserted. If there have been deduced
Drawings, these links are displayed as well (if the Drawings are actually open).
- Annotation:
If cross linked files of CATIA assemblies are copied into other folders, the links have to
be reassigned. This process is done in the Desk. CATIA automatically recognizes the
components only in case the file x.CADProduct is in the folder of the linked
components.
86
After opening a new assembly (File / New / Product), the four existing Parts can be
inserted using Existing Component. This feature can be activated either by the
properties menu (right mouse button) Components, by the pull down menu Insert or by
activating the according button in the Product Structure Tools toolbar.
87
CATIA
positions
the
inserted
components according to their location
regarding the coordinate systems in the
Part structure. The four Parts can be
seen in the Specification Tree. If
nothing else is specified, CATIA labels
the components in order of their
insertion. The properties window allows
a renaming of the elements.
is
done
by
88
The
piston-pin
bearing
is
connected with the upper Conrod
bearing using a Coincidence Constraint
and an Offset Constraint. The Piston
itself is positioned in the Cylinder with a
Coincidence Constraint of the two axes
(Piston and Cylinder).
Figure 151 shows the completely
constrained assembly. The Crankshaft,
the Conrod and the Piston still have one
degree of freedom each, which results
in
a
movable
crankdrive.
The
Constraints are displayed in the
Specification Tree and in the design
area; they can be switched to noshown
space, if desired.
89
When activating
the feature With
respect
to
constraints
in
Manipulation, the
assembly can be
moved
with
respect to its
constraints.
Challenge: There is one error within this example which can be detected when
carrying out a clash analysis.
90
91
The following listing describes some of the most frequently used formats for Parts and
Products.
x cgr
The cgr format includes simplified geometry data and can
be used as a memory efficient way to handle complex elements in CATIA,
especially for DMU applications. The cgr files cannot be opened in CATIA by
simply selecting File / Open, but they have to be inserted in a product using
Components / Existing Component.
92
stp
Step files of CATIA V5 Products still contain the Product structure.
They are set up from volumes, points and surfaces. As with the other formats,
the build-up of the parts can not be retrieved, i. e. the volumes can be viewed
but not edited (The geometry information is without history.). The Step files
can be opened via File / Open.
igs
These files consist of points and surfaces. They can be opened
similar to the Step files. The geometry information is without history.
Send To:
To transfer data to another directory or to other data media, the feature File / Send To
can be used. By using this function, the file structure can be preserved, which means
that the moved elements keep their relations.
Desk:
The Desk (File / Desk) graphically displays the links between the single elements (see
page 86).
CATDUA:
CATIA provides a check
and clean program for
erroneous
files named
CATDUA. It can detect
errors and, if possible,
mend them. To activate it,
the menu Tools / Utility /
CATDUAV5 can be used;
alternatively,
CATDUA
can be opened by rightclicking
the
selected
element on the Desk.
10.5 Publication
Making elements available to other users can be done by publicating them. When
using the assembly design mode, this can be quite useful. To publicate elements,
choose the menu Tools / Publication.
94
95
11.1.8 Views
11.1.10
Generation
11.1.11
Dress-up
11.1.12
Geometry Creation
2D sketches can be created using the Geometry Creation features. They are to be
used similar to the tools in the sketch mode.
Point creation features
Line creation features
Definition of circles and ellipses
Create profiles and polygons
Create splines, connecting curves and
conic sections
11.1.13
Geometry Modification
11.1.14
Annotations
The toolbar Annotations can be used for inserting text, surface specifications, welding
symbols and tables.
Text, Text with Leader, Text Replicate, Balloon,
Datum Target, Text Template Placement
Roughness Symbol, Welding Symbol, Weld
Table, Table from CSV
Graphic ...
Value ...
Tolerance ...
Dimension Line ...
Allows renaming of
the dimension and
shows the creation
date
Graphical properties
Value orientation,
format, precision,
fake dimension, etc.
Different options for
tolerance values
Graphical formatting
of the dimension line
98
geometrical element
in
3D,
CATIA
switches back to Drafting mode and displays a preview of the views.
button
99
By means of the control button the views can be rotated. To finish the view creation, a
click on the drawing sheet or on the middle of the control button settles the views.
Based on the defined views, a section view of the
body can be created.
View
(right
button).
mouse
- Annotation: All operations, such as Dimensioning, Text, inserted profiles etc. are
added to the active object. Therefore, inconveniences may occur when objects are
edited without being active.
100
101
102
The solid body shown above measures 100 x 70 x 50 mm. The according parameters
have been assigned automatically by CATIA.
width:
`PartBody\Pad.1\Length` ...
50 mm
length: `PartBody\Sketch.1\Offset.6\Offset` ...
100 mm
height: `PartBody\Sketch.1\Offset.8\Offset` ...
70 mm
103
104