Professional Documents
Culture Documents
Baccara Solenoid Catalogue 2009 PDF
Baccara Solenoid Catalogue 2009 PDF
Main Contents
Technical Info
GEM-SOL Index
BACCARA
GEM-SOL Coil
General Description
The GEM-SOL coil is designed to be
mounted on the "operator" to set up a
solenoid valve.
The coil, including its magnetic circuit, is
encapsulated in high temperature resistant
nylon to withstand humidity and heavy
duty requirements.
Notes
The coil should not be energized without
being assembled on operator.
All GEM-SOL coils are designed to operate
at 10% of nominal voltage.
Our engineering department is able to design
coils to any special requirement, they can then
be produced in any quantity specified.
GEM-SOL coils are suitable to work at
100% ED, however when energizing AC8W or
DC10W coils for a long time, the temperature
developed may affect solenoid seals. Please
consult our technical sales department to get
further information on the use of lower power
coils or Viton seals.
For outdoor applications or when the coil is
exposed to high humidity, we recommend the use
of impregnated coils. Please contact our technical
sales department for specific requirements.
How to Order
Example : GEM-B-341
GEM-B
AC
50 Hz
60 Hz
DC
(W)
V
8 5.5 2.5 8 5.5 2.5 10 5.5 3.5
6
12
24
48
110
120
230
240
other : Please contact our technical sales
department for specific requirements.
1.1
Voltage
6
12
24
48
110
120
230
240
other
Connector
Power
1
2
3
4
5
6
7
8
9
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC2.5W
DC5.5W
DC3.5W
1
2
3
4
5
6
7
8
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
other
0
1
2
3
4
5
9
GEM-SOL Index
Technical Specifications
Power Consumption Table (AC)
H 180
Temp Range:
-20 C to 150 C
Duty cycle:
Protection:
Voltage range:
Voltage variation:
Power consumption:
AC - see table
Type
Inrush
Holding
8W
26VA-13W
16VA-8W
5.5W
16VA-8W
12VA
2.5
2.5W
2.5W
Junction box:
DIN 43650
Cable exit::
Assembly:
In any position
Fixing:
Weight:
100gr.
Dimensions
GEM-SOL with
Flying Leads
GEM-B-31
24V 50Hz 8W
1.2
SV-04-09
GEM-SOL Index
Technical Info
GEM-SOL Index
GEM-SOL Index
BACCARA
GEM-SOL Ex Coil
according to ATEX 94/9/EC (ATEX 100a)
II 2 G Ex mb II T6 IP65
General Description
The GEM-SOL Ex coil is designed to
be mounted on a GEM- SOL valve.
The coil meets the guidelines of ATEX
97/9/EC, EN 60079-0 and EN60079-18.
The coil uses a pulse wide modulation system
to reduce the power rating of the coil to about
1 (w) at holding.
Notes
This coil must be mounted on a GEM-SOL solenoid valve.
It can only be used with the media specified for
GEM-SOL valves. It is for use in:
Explosion Group II, Category 2G, and Temperature
Class T6.
This coil must be protected against direct and other
U.V. light.
The type of protection used is Encapsulation Ex mb,
by potting Epoxy.
Certification: DEMKO 08 ATEX 143928X
Use with DC GEM-SOL valves.
To order valves manufactured to your specific
requirements, please contact our technical sales
department.
How to Order
Example : GEM-BE-1-31
Is an Ex GEM-SOL coil 24V both AC and DC current.
GEM-BE
Type
1
Power (1)
Voltage
12
24
48
110
230
2
3
4
5
7
1W
1.5
Technical Info
GEM-SOL Index
Technical Specifications
Coil winding insulation:
Class H (180C)
Ambient temperature:
-20C to 50C
Protection method:
Ex mb IIC T6 IP65
100%
12
24
48
110
230
720
400
200
88
40
8.6
9.6
9.6
9.7
9.2
IP65
36
20
Electrical connection:
0.9
0.9
0.9
0.9
Assembly:
II 2 G
0.8
Weight:
Electrical specifications:
Voltage variation:
Voltage:
Both AC and DC
Inrush time:
50 [msec]
Holding power:
Dimensions
45
80.5
17
13.2
33
12
1.6
SV-04-09
GEM-SOL Index
BACCARA
GEM-SOL IP 68 COIL
General Description
The GEM-SOL IP 68 coil is designed to be
mounted on the "operator" to set up a
solenoid valve.
The coil meets the requirement of the
European Standards IEC 529 code IP68.
Notes
The coil should not be energized without
being assembled on operator.
Voltage rating is 10%.
For best results, the coil should be mounted
on sealed operators. Please consult with our
technical sales department.
Use with GEM-SOL valves suitable for the
coils power.
Suitable for infinite immersion up to 2m depth.
Please contact our technical sales department for
specific requirements.
How to Order
Example : GEM - BP - 31
Is an IP68 GEM-SOL coil 24V AC 8W 50Hz.
GEM-BP
Voltage
12
24
Power
2
3
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC2.5W
DC5.5W
DC3.5W
1
2
3
4
5
6
7
8
1.7
Technical Info
GEM-SOL Index
Technical Specifications
Construction:
H 180C
Duty cycle:
100% ED.
Protection:
Voltage range:
12, 24 AC and DC
Voltage variation:
Electric connection:
Assembly:
In any position
Fixing:
Inrush
Holding
8W
26VA-13W
16VA-8W
5.5W
16VA-8W
12VA
2.5W
2.5W
2.5W
Dimensions
1.8
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Operator seat should be designed according
to our specifications.
Operator for DC is without shading ring and may
not be used for AC.
ADC operators and valves are suitable for use
with AC 8W or DC 10W. When an order of an
operator or a valve is without a coil, ADC
operators will be supplied.
When assembling coil, take care not to tighten
nut excessively.
Valves are inspected at general pressure of
12 bar. Higher pressures are available.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
2W NC
How to Order
3W
Example : GEM-O-2W1-N-341
Example : GEM-O-1034-V-341
Is a GEM-SOL Operator, 1/8BSP, 3W NC,Orifice 2.0, Viton, 24V AC 5.5W 50 Hz with connector.
2W
GEM-O
2W
2W NC
2W NO(1)
3W
GEM-O
1/8"BSP
1/8"NPT
10
11
2W NO
3W NC
3W NO
3W NO(1)
NBR
Viton
EPDM
PTFE(3)
Kalrez(2)
1
2a
Function
Port
Voltage
Seals
Function
Orifice
2
3
4
4a
0.8
1.2
1.6
2.0
2.4
3.0
1
2
3
4
5
6
N
V
E
T
K
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC2.5W
DC5.5W
DC3.5W
1.9
Connector
Power
0
1
2
3
4
5
6
7
8
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Function:
2/2-3/2 way NC or NO
Operator assembly:
Orifice size:
0.8 up to 3mm
hexagonal 22 to the
Pressure range(bars):
Temperature range:
16 to 36 ms complete cycle
Cycling rate:
1600c/min
Coil position:
By screwing M20X1
Coil data:
Materials in contact
with fluid:
Operator:
Stainless steel
series AISI 300 & 400
Shading ring:
standard - copper
upon request - silver and aluminium
Orifice:
Stainless steel
Weight:
180g
Media:
Dimensions
GEM-B-31
24V 50Hz 8W
63.5
5.70.1
2W/3W NC, NO
GEM-B-31
24V 50Hz 8W
Operator seating
1.10
SV-05-10
GEM-SOL Index
Technical Info
GEM-SOL Index
GEM-SOL Index
Technical Info
GEM-SOL Index
Technical Info
GEM-SOL Index
BACCARA
Notes
ADC valves are suitable to work
only with AC 8W or DC 10W coils.
Latch valves are available upon request.
Valves are without manual
override. (2/2 way NC valves).
When ordering PTFE seal, Viton
O-ring will be used.
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
IN
P
(2)
OUT
A
(1)
How to Order
Example : GEM-A-2201aV-311
Is a GEM-SOL direct operated Brass, 1/4"BSP,
2W NC, 8.0 orifice, Viton, 24V AC 8W 50 Hz with connector.
Note: When ordering without coil, please define what current and pressure rating is needed (DC, AC or ADC).
When this information is not defined, an ADC valve will be supplied.
GEM-A
Body
Brass
St.st
2
3
Port
1/4" BSP
1/4" NPT
Function
20
21
2W NC
2W NO
1
2
Orifice
6.0
4.5
8.0(2)
8
9
a
1.15
Voltage
Seals
Viton
EPDM
Kalrez(1)
PTFE
V
E
K
T
W/out coil
6
12
24
48
110
120
230
240
other
Connector
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
DC 5.5W
0
1
2
3
4
5
7
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Function:
Ports size:
Orifice:
Kv:
See table
AC/8W
4.5
Pressure range:
AC/5.5W
3.8
Temperature range:
Fluid: max 80 C
DC/10W
4.5
3.8
1.5
DC/5.5W
3.2
10
Ambient: -10 C to 50 C
Manual Override:
None
Materials :
Main valve:
Orifice
4.5
Orifice
Orifice
3.8
2.5
6.0
8.0
series
Seals:
Coil
Current/Power
366 gr
Media:
Coil voltage:
Orifice
Orifice
4.5
6.0
ADC
AC/8W DC/10W
DC 10W, 5.5W
Protection class IP65 with connector
Dimensions
22
Mounting Bracket
30
40
61.2
1.16
SV-04-09
Technical Info
GEM-SOL Index
NO
In
DC
In NC
Vacuum
Pump
Ex NO
P
(1)
Example : GEM-A22028V-331
Pressure Application
(1)
Pressure
3
4
Tank
Out
NC/NO
Pressure 1
Vacuum 2
(2)
A
(2)
Vacuum Application
(3)
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
0
1
2
3
other
1.17
GEM-SOL Index
Technical Specifications
Vacuum Application
Function:
Ports size:
Orifice:
Function
4.5
3W NC
-1
Kv(L/min):
3W NO
Temperature range:
Fluid: max. 80 C
Orifice
6.0
-1
-1 to 1 -1 to 0.5
5
8.0
-1
NA
10
Ambient: -10 C to 50 C
Manual Override: None
Materials :
Main valve :
Pressure Application
Function
Solenoid Operator:
3W NC
4.5
Orifice
6.0
8.0
2.8
1.6
0.5
Seals:
(for 3mm
3W NO top orifice)
1.5
NA
Viton or EPDM
10
366 gr
Media:
Air, water
Coil voltage:
DC 10W
Dimensions
Mounting Bracket
1/8 BSP/NPT
GEM-B-31
24V 50Hz 8W
30
9.5 TYPx2
61.2
40
1.18
SV-03-10
Technical Info
GEM-SOL Index
BACCARA
Notes
Valves are inspected at general pressures
of 12 bar or less (see table).
Valves for higher pressures are available.
ADC valves are suitable to work only with
AC 8W or DC 10W coils.
GEM-H
Body
Mazak
Function
1
3W NC
3W NO
3
4
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
Manual
Override
Seals
1
2
3
4
5
6
NBR
Viton
EPDM
N
V
E
None
90 turn
Push in
1.19
0
1
2
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
Connector
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC2.5W
DC5.5W
DC3.5W
0
1
2
3
4
5
6
7
8
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Functions:
Orifice:
See table
Kv:
See table
Pressure range:
See table
Temperature range:
Manual Override:
Materials :
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
ADC
23
20
15
10
5.5
Fluid: max 80 C
AC/8W DC/10W
35
30
17
14
10
Ambient: -10 C to 50 C
AC/5.5W
23
20
15
10
5.5
Brass 90 turn or
20
16
10
brass push-in
0.6
1.1
1.7
2.5
3.5
4.5
Main valve :
Mazak
Solenoid Operator:
Coil
Current/Power
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
ADC
25
20
15
11
AC/8W DC/10W
30
22
17
12
10
250 gr.
AC/5.5W DC/5.5W
25
20
15
11
Media:
Air
AC/2.5W DC/3.5W
20
18
12
Coil voltage:
1.4
2.2
3.0
3.5
Dimensions
port (2)
port (1)
1.20
SV-04-09
GEM-SOL Index
BACCARA
Notes
Valves are inspected at general pressures of 12 bar or
less (see tables).
Valves for higher pressures are available upon request.
Valves for pressure higher than 25 bar are less manual
override. (For valves with pressure higher than 12 bar,
please refer to section 5 on page 7.5).
Baccara manufactures two types of NO valves:
Supply pressure is through the base as in NC valves.
These valves can be combined in a standard manifold.
They are without manual override.
Supply pressure is through the tube. These valves
cannot be combined in a standard manifold. They are
with manual override.
When using a manifold with more than 8 stations it is
advisable to use two air supplies, one at each end.
ADC valves are suitable to work only with AC 8W
or DC 10W coils.
LATCH valves are available upon request.
When ordering pressure separation plug, please add
Part No.125110000 to your order.
To order valves manufactured to your specific requirements,
please contact our technical sales department.
Size:
Assembly:
Port size:
Material:
GEM-V
Port
BSP
NPT
Component
10
11
Left
Right
Middle
1
2
3
1.21
Technical Info
GEM-SOL Index
Technical Specifications
Function:
Mounting:
Orifice:
Kv:
Pressure range:
Temperature
range:
Manual Override:
Materials :
Orifice
Coil
Current/Power
Fluid: max 80 C
Ambient: -10 C to 50 C
Plastic, brass screw or
brass finger knob. NOa are without
manual override
Main valve :
Mazak, Brass
Solenoid Operator:
Stainless steel 300 & 400 series
Seals:
NBR, Viton or EPDM
220 gr for Mazak valve
Air, water, oil
All Baccara coils voltages 10%
AC 8W, 5.5W and 2.5W &
DC 10W, 5.5 and 3.5W
ADC
23 20
15
10
AC/8W DC/10W
35 30
17
14 10
AC/5.5W
23 20
15
10
8 5.5
AC/2.5WDC/5.5WDC/3.5W
20 16
10
8 5.5
6
ADC
*
*
AC/5.5W
DC/5.5W
*AC/2.5W DC/3.5W
AC/8W DC/10W
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
25
20
15
11
30
22
17
12
10
25
20
15
11
20
18
12
1.4
2.2
3.0
3.5
Dimensions
*Pressure separation plug can be ordered on request.
1.22
GEM-SOL Index
GEM-SOL Direct Operated TYPE V 2/2 Way, 3/2 Way NC, NO
2W NC
2W NO through base
3W NC/NO
3W NO through base
Ex (NC)
In (NO)
IN (NC)
Ex (NO)
2W NC (forge)
3W NC/NO
6.2
TYPx2
TYPE V
TYPE V
Mazak
Brass
24
24
(1)
(2)
4.5
TYPx2
A
GEM-SOL
64
GEM-SOL
A
62
62
10.25
TYPE VL
61.6
9.5
TYPX2
24
3W NO through base
24
2W/3W NC (forge)
Brass Forging
32
24
4
4.3
TYPX2
1/8 BSP/NPT
65.2
72.4
10.25
GEM-B-31
24V 50Hz 8W
17
15
GEM-B-31
24V 50Hz 8W
32
32
32
1.23
32
4.3
TYPX4
GEM-SOL Index
GEM-V - MANIFOLD
How to Order Table applying to all the valves being of identica
GEM-V
No.of
valves
No. of
stations
Port
Specify
quantity
Specify
quantity
1/8" BSP 10
1/8" NPT 11
Without
manifold
Body
Mazak
Brass
St. St.
Function
1
2
3
2W NC
2W NO
2W NO*
3W NC
3W NO
3W NO*
1
2
2a
3
4
4a
1
2
3
4
5
6
0.8
1.2
1.6
2.0
2.4
3.0
Manual
Override
Seals
Orifice
N
V
E
NBR
Viton
EPDM
None
Plastic
Slot
Knob
push
push
lock
0
1
2
3
4
5
Example : GEM-V-6/6-10132V2-220
Is a GEM-SOL direct operated sub-base
'V' type, 1/8" BSP with Mazak body, 3WNC
1.2, Viton seals, slot M/O, 12V AC 8W 60Hz
without connector.
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC 2.5W
DC 5.5W
DC 3.5W
Connector
0
1
2
3
4
5
6
7
8
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
other
0
1
2
3
4
5
9
GEM-V
No. of
stations
No.of
valves
Body
Port
Function
Manual
Override
Seals
Orifice
Voltage
Power
Connector
As above table
Specify
quantity
Specify
quantity
Specify
quantity
Specify
quantity 0
Specify
quantity
Specify
quantity
Example :
GEM-V-2/6-10132N0-221
GEM-V-3/6-10142N0-221
3/6 stations with 1/8" BSP Mazak body, 3W NO, 1.2 orifice, NBR seal
no manual override, 12V AC 8W 60Hz with
GEM-V-1/6-10112N0-221
1/6 stations with 1/8" BSP Mazak body, 2W NC, 1.2 orifice, NBR seal
no manual override, 12V AC 8W 60Hz with
VALVES only
How to Order Table for GEM-V-Body
GEM-V-Body
Body
Port
1/8" BSP 10
1/8" NPT 11
Mazak
Brass
St. St.
Function
1
2
3
2W NC
2W NO
2W NO*
3W NC
3W NO
3W NO*
1
2
2a
3
4
4a
1
2
3
4
5
6
0.8
1.2
1.6
2.0
2.4
3.0
Manual
Override
Seals
Orifice
N
V
E
NBR
Viton
EPDM
0
1
2
3
4
5
None
Plastic
Slot
Knob
push
push
lock
Example : GEM-V-Body-10132V2-220
Is a GEM-SOL direct operated 'V' type valve:
1/8" BSP with Mazak body, 3WNC, 1.2, Viton seals,
slot M/O, 12V AC 8W 60Hz without connector.
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC 2.5W
DC 5.5W
DC 3.5W
Connector
0
1
2
3
4
5
6
7
8
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
other
0
1
2
3
4
5
9
Port
1/8" BSP 10
1/8" NPT 11
Body
Brass
Function
2
2W NC
2W NO
2W NO*
3W NC
3W NO
3W NO*
1
2
2a
3
4
4a
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
1
2
3
4
5
6
Manual
Override
Seals
NBR
Viton
EPDM
N
V
E
None
Plastic
Slot
Knob
push
push
lock
Example :
GEM-VL-211N0-221
Is a GEM-SOL direct operated Type VL valve :
Brass body, 2W NC, 0.8 orifice, NBR seals, no manual override,
12V AC 8W 60Hz with connector.
1.24
0
1
2
3
4
5
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
AC 2.5W
DC 5.5W
DC 3.5W
Connector
0
1
2
3
4
5
6
7
8
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
other
0
1
2
3
4
5
9
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
GEM-SOL LPG
1/4", 3/8", 1/2" 2/2 Way NC, NO
General Description
GEM-SOL LPG 2/2 way NC, NO direct operated
solenoid valves have been specially designed for
use in LP gas systems.
They can also be used for air, water and vacuum
systems where high flow at low pressure is required
Notes
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
Latch valves are available upon request.
2W NC
GEM-L
Body
Brass
St. st
Port
2
3
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
Seals
Function
20
21
30
31
40
41
2W NC
2W NO
1
2
NBR
Viton
EPDM
1.25
2W NO
Voltage
N
V
E
W/out coil
6
12
24
48
110
120
230
240
other
Connector
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
0
1
2
3
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Pressure and flow table NC, NO
Function:
2/2 Way NC
Ports size:
See table
Temperature range:
Fluid: 80 C max.
Size
1/4"
Ambient: -10 C to 50 C
Materials in contact
with fluid:
Pressure (bar)
Orifice AC DC NO Kv(L/Min)
1.5 0.7 0.5
12
8
3/8"
1.5
0.7
0.5
16
1/2"
12
0.8
0.4
0.3
35
Main valve:
Brass - hot stamping
Stainless steel 316
Solenoid Operator:
Stainless steel 300 & 400 series
Seals:
NBR, Viton, EPDM
Coil Voltage:
Size
B1
1/4"-3/8" 58
82
85
22
32
62 1/4"-3/8"BSP/NPT 11
85
97
27
38
65
1/2"
69
1/2"BSP/NPT
Weight
with coil
M5x0.8 22
394g
13.5 M5x0.8 22
484g
Dimensions
2W NC
2W NO
1.26
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
GEM-SOL LPG
3/4", 1" 2/2 Way NC
General Description
GEM-SOL LPG 2/2 way NC direct operated
solenoid valves have been specially designed for
use in LP gas systems.
They can also be used for air, water and vacuum
systems where high flow at low pressure is required
Notes
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
How to Order
Example : GEM-L-2501N-311
Is a GEM-SOL LPG, Brass, 3/4" BSP, 2WNC
NBR seals, 24V AC 40W Hz with connector.
GEM-L
Body
Brass
St. st
Port
2
3
3/4"BSP
3/4"NPT
1"BSP
1"NPT
Seals
Function
50
51
60
61
2W NC
NBR
1.27
Voltage
N
W/out coil
12
24
230
Connector
Power
0
2
3
7
No coil
AC40W 50Hz
DC36W
0
1
3
without
with
with LED
with bi
color LED
flying leads coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Function:
2/2 Way NC
Ports size:
See table
Temperature range:
Fluid: -10C - 80 C
Ambient: -10 C to 50 C
Size
Orifice
3/4"
20
1"
25
(mm)
Pressure
(bar)
Kv(L/Min)
80
-1 to 1
125
Materials in contact :
Main valve :
with fluid
Dimensions
Size
3/4"
1"
90
100 65 128.5 21
1" BSP/NPT
92.7
weight
with coil
87.7
92.7
46
55
GEM-B-31
24V 50Hz 8W
B
F
1.28
SV-03-10
Technical Info
GEM-SOL Index
BACCARA
Typical Applications
Process systems
Water or sewage treatment
Industrial and irrigation applications
General purpose applications, such as oil,
gas systems, autoclaves etc.
Notes
The working pressure is 12 bar. On certain models,
valves for higher pressure up to 20 bar are available.
A minimum pressure of 0.3 or 0.5 is required.
Valves without tube are less manual override.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
Latch valves are available upon request.
Available options:
Low power coils
Explosion-proof coils
A slow closing system to prevent a water
hammer effect.
NC
without tube
1.29
GEM-SOL Index
GEM-S
Body
Brass
St.st
GEM-S
Port
2
3
Body
Brass
St.st
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
3/4"BSP
3/4"NPT
1"BSP
1"NPT
Function
20
21
30
31
40
41
50
51
60
61
Port
2
3
1/2"BSP
1/2"NPT
3/4"BSP
3/4"NPT
1
2W NC
2W NO(2) 2
2a
2W NO
w/o tube(1)
NBR
Viton
EPDM
N
V
E
None
Slot
Knob
0
2
3
Function
40r
41r
50r
51r
Manual
Override
Seals
1
2W NC
2a
2W NO
w/o tube*
Manual
Override
Seals
NBR
Viton
EPDM
20...41
N
V
E
None
Slot
Knob
1.30
0
2
3
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
other
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
other
9
GEM-SOL Index
Technical Specifications
Function:
Ports size:
See table
Temperature range:
Fluid: -10C to 80 C
Size
Orifice
(mm) Pressure Kv(L/Min)
1/4"
Ambient: -10 C to 50 C
Manual Override:
12
3/8"
1/2"
12
0.5 - 20
16
35
Materials in contact :
with fluid
Main valve :
Brass - hot stamping, upon request
dezinced brass (Cz132), St.st.316
Size
Orifice
(mm)
Solenoid Operator:
1/2"
16
3/4"
16
Kv(L/Min)
Pressure
60
0.5 - 20
80
Seals:
NBR, Viton, EPDM
Coil voltage:
DC 10W
Protection class IP65 with connector
Weight
(gf)
*less coil
3/4"
20
130
0.3-15 0.3-15
1"
25
200
760
Dimensions
Port Size
32 55
32
17
15
25
103
34
21
16 29.5 109.50
3/4" BSP/NPT 90
1.31
B
106
GEM-SOL Index
Port Size
1/4"- 3/8"
58
89
22
32
62 BSP/NPT
125
11
1/2"
70
95
27
38
70
1/2
BSP/NPT
135
13.5
weight
with coil
M5X0.5
22
466g
M5X0.8
22
562g
1/4-3/8
NO
NC / NOa
M5 DEEP 8
TYPx2
22
22
108.1
Manual
Override
18
70
35
44
67.6
GEM -
r 16mm orifice
NC / NOa
1.32
SV-05-10
Technical Info
GEM-SOL Index
BACCARA
Notes
The working pressure is 12 bar. On certain models,
valves for higher pressure up to 20 bar are available.
A minimum pressure of 0.3 or 0.5 bar is required.
Valves without tube are less manual override.
Latch valves are available upon request.
Available options:
Low power coils
Explosion-proof coils
A slow closing system to prevent a water
hammer effect.
Stations on the manifold are easily attached by 3 screws.
End stations are either with ports or plugged.
When using a manifold with more than 8 stations, it is
advisable to use two pressure supplies, one at each end.
Pressure separation plug can be ordered.
A combination of functions on the manifold is available.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
No. of
GEM-SM stations
specify
quantity
Body
Brass
St.st
2
3
Port
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
Seals
Function
20
21
30
31
40
41
1
2W NC
2
2W NO
2a
2W NO
w/o tube*
NBR
Viton
EPDM
1.33
N
V
E
Manual
Override
None
Slot
Knob
0
2
3
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
9
other
GEM-SOL Index
Technical Specifications
Pressure and flow table
Function:
Ports size:
See table
Temperature range:
Fluid: -10C to 80 C
Orifice
1/4"
1/2"
Ambient: -10 C to 50 C
Manual Override:
Size
(mm)
Pressure
Kv(L/Min)
12
0.5 - 20
12
35
Materials in contact :
Main valve :
with fluid
Coil voltage:
1/4"
36+34xN 99
57
80
18
34
1/2"
40
Size
1/4
3/8
BSP/NPT BSP/NPT
1/2
3/4
BSP/NPT BSP/NPT
14
19
25
25
21
26
32
32
N - Number of stations
Dimensions
H
TYPx2
G
A
1.34
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Maximum pressure for use at nominal
voltage +10%. For further information,
please consult our engineers.
When switching from an AC coil to a DC
coil, the solenoid operator must be
changed.
Can be used in vacuum application
from -1 bar to maximum pressure (as in
pressure and flow table).
GEM-Z r
GEM-Z
Body
Brass
St.st.
Nylon (1)
Port
2
3
4
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
1/2"BSP
1/2"NPT
3/4BSP
3/4NPT(3)
Function
20
21
30
31
40
41
40r
41r
50r
51r
2W NC
2W NO(2)
1
2a
Seals
NBR
Viton
EPDM
1.35
Voltage
N
V
E
W/out coil
6
12
24
48
110
120
230
240
other
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Pressure and flow table NC
Function:
Ports size:
See table
Temperature range:
Materials:
Main valve:
Brass, St.st. (1/4, 3/8, 1/2, 3/4)
Size
Orifice
1/4"
0-14
0-7
18
3/8"
12
0-14
0-8
50
1/2"
16
0-14
0-8
60
3/4"
16
0-14
0-8
80
(mm)
Pressure
AC
DC
Kv(L/Min)
Solenoid operator:
Stainless steel 300 & 400 series
Size
Orifice
1/4"
0-8
0-8
18
3/8",1/2"
12
0-8
0-8
50
(mm)
Seals:
NBR, Viton, EPDM
Media:
Coil voltage:
Pressure
AC
DC
Kv(L/Min)
AC 8W, DC 10W
Dimensions
415g
3/8"
22 22 38 70 95 3/8" BSP/NPT
530g
1/2"
22 22 38 70 95 1/2" BSP/NPT
530g
1/2" or 3/8"
22 22 32 58 89 1/4" BSP/NPT
D E
95.4
1/4"
13
GEM-Z-4....
Nylon Valve Body
Weight
with coil
Size
70
42.5
67.4
GEM-Z- - r
16mm orifice - 1/2", 3/4"
1/2 or
3/4BSP/NPT
1.36
SV-05-10
Technical Info
GEM-SOL Index
BACCARA
Notes
Maximum pressure for use at nominal
voltage +10%.
When switching from an AC coil to a DC
coil, the solenoid operator must be
changed too.
Can be used in vacuum application
from -1 bar to maximum pressure (as in
pressure and flow table).
For further information, please consult
our engineers.
NO
NC
How to Order
Example : GEM-Z-2601N-231
Is a GEM-SOL Zero differential, Brass, 1" BSP, 2WNC,
NBR, 12V DC 36W with connector.
GEM-Z
Body
Brass
St. st.
Port
2
3
3/4"BSP
3/4"NPT
1" BSP
1" NPT
Function
50
51
60
61
2W NC
2W NOa
Seals
1
2
NBR
EPDM
1.37
Voltage
N
E
W/out coil
12
24
230
Power
0
2
3
7
No coil
AC40W 50Hz
DC36W
Connector
0
1
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
AC / DC
46
55
1.38
SV-03-10
Technical Info
GEM-SOL Index
BACCARA
Notes
A minimum differential pressure of 1 bar
is required for operation.
1" valves are with male threaded ports.
When assembling valve, take care not to
tighten pipe connections excessively.
Contact our technical sales department for
details on external pilot operation. This makes
it possible to separate between operating media
and the media in use.
Valves for low pressure 0.2 - 10 bar are available.
How to Order
Example : GEM-S-4501N-311
Is a GEM-SOL Pilot operated, nylon, 3/4" BSP,
2WNC, NBR seals, 24V AC 8W 50 Hz with connector.
GEM-S
Body
Nylon
Port
4
3/4"BSP
3/4"NPT
1"BSP
1"NPT
Function
50
51
60
61
2W NC
2W NO
Seals
1
2
NBR
1.39
Voltage
N
W/out coil
6
12
24
48
110
120
230
240
other
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
surge protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Pressure and flow table
Function:
Temperature range:
Fluid: 80 C max.
Size
Orifice
Pressure
Kv(L/Min)
Ambient: -10 C to 50 C
3/4"
25
1-10
136
1"
25
1-10
200
Materials :
Manual override:
Brass screw
Flow adjusted by flow control handle.
Weight::
450 gr.
Media:
Mounting:
Coil Voltage:
DC 10W
Dimensions
1
BSP/NPT
3/4" BSP/NPT
1.40
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Supply piping must be at least the same size
as the port, and unrestricted. Install flow
controls in cylinder line only.
For pressure higher than 12 bar, please
consult our engineers.
How to Order
Example : GEM-S-2204V21-311
Is a GEM-SOL pilot operated Brass, 1/4" BSP,
NO, Viton, slot manual override with bracket,
24V AC 8W 50 Hz with connector.
GEM-S
Body
Brass
Port
2
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
Function
20
21
30
31
40
41
NC
NO
3
4
NO
Manual
Override
Seals
NBR
Viton
EPDM
N
V
E
None
Slot
Knob
Hydraulic
0
2
3
4*
Bracket
without
with
* for NC application
1.41
NC
0
1
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
0
1
2
3
surge protection 6
with LED
9
other
GEM-SOL Index
Technical Specifications
Pressure and flow table
Size
Pressure
1/4"
Kv(L/Min)
18
0.8 -12
3/8", 1/2"
Dimensions
Size
50
Mounting Bracket
B
1/4"
124.5
58
25 32.5 1/4"
3/8", 1/2"
134
69
30 32.5 1/2"
Weight
with coil
M4x0.7
Deep 6
M5x0.8
Deep 7
32
540g
1/4"
15
38
758g
3/8", 1/2"
20
Size
25
11
14
20
25
32
30
13
22
25
33
40
1.42
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Pilot pressure should be at least 1.5 bar.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
How to Order
Example : GEM-SE-2209N-331
Is a GEM-SOL general purpose pilot operated,
Brass 1/4" BSP 3W with NBR seals, 24V DC 10W with
connector.
GEM-SE
Port
Body
Brass
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
Function
20
21
30
31
40
41
general
purpose
Seals
NBR
Viton
EPDM
Bracket
N
V
E
1.43
without
with
0
1
Power
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W50Hz
AC5.5W60Hz
DC5.5W
Connector
0
1
2
3
4
5
7
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
other
9
GEM-SOL Index
Technical Specifications
Function:
Ports size:
See table
Temperature range:
Orifice
Fluid: max 80 C
1/4"
Ambient: -10 C to 50 C
3/8"
12
1/2"
12
Materials in contact
with fluid :
Pressure
Kv(L/Min)
12
0 - 10
16
35
Main valve :
10
Minimum
Pilot Pressure
6
4
2
0
-1
10
Line Pressure
Mounting Bracket
Size
1/4"
34
32
32.5
1/4"
3/8",1/2"
45
38
41
3/8", 1/2"
141.5 45.6
155
45.6
Size
M4 37.5
25
58
1/4"
15
M5
30
69
47
3/8", 1/2" 20
25 4.5 11
14
20
25
32
30
22
25
33
40
13
Dimensions
G Deep K
1.44
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
For 3/8 to 3/4" valves: coils available
in DC 12, 24, 38W and in AC 24, 230
AC 36W 50Hz.
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
How to Order
Example : GEM-X-2209N0-331
Is a GEM-SOL general purpose
direct operated, Brass 1/4" BSP 3W
general purpose with NBR seals,without
bracket, 24V DC 10W with connector.
GEM-X
Body
Brass
Port
2
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
3/4"BSP
3/4"NPT
Function
20
21
30
31
40
41
50
51
general
purpose
Seals
NBR
EPDM
N
E
Note:
(1) Bracket not available in 3/4"
(2) For 3/8" to 3/4" valves: coils available in DC 12, 24, 38W
and in AC 24, 230 AC 36W 50Hz
1/4" port - available in all voltages
1.45
Bracket(1)
without
with
0
1
3/4" 3W
Power (2)
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
DC38W
AC40W50Hz
Connector
0
1
2
3
5
4
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
surge protection
with LED
other
4
5
GEM-SOL Index
Technical Specifications
Pressure and flow table NC
Function:
Ports size:
Size
Orifice
(mm)
Pressure
See table
1/4"
-1 to 3
12
Temperature range:
Fluid: max 80 C
3/8"
12
-1 to 5
16
1/2"
12
-1 to 5
35
3/4"
19
-1 to 3
130
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Kv(L/Min)
Main valve :
Brass -hot stamping
Solenoid operator:
Stainless Steel 300 & 400 series
Seals:
NBR, EPDM
Media:
Mounting Bracket
Size
1/4"
15
3/8", 1/2" 20
25 4.5 11
14
20
25
32
30
22
25
33
40
13
Dimensions
Size
1/4"
118.5 58
3/8"-1/2" 147.8 69 30
41
M.4x0.7
Deep 6
M.5x0.8
Deep 7
32
32
45.9
38
45
59.7
25 32.5 1/4"
3/8"
1/2"
GEM-B-31
24V 50Hz 8W
GEM-B-31
24V 50Hz 8W
1.46
SV-05-10
Technical Info
GEM-SOL Index
BACCARA
Notes
1" valves are with male threaded ports.
When assembling valve, take care not to
tighten pipe connections excessively.
Valves are controlled by 3/2 way NO valve.
Pilot
pressure
How to Order
Example : GEM-Z-4501N-311
Line
pressure
GEM-Z
Body
Nylon
Port
4
3/4"BSP
3/4"NPT
1"BSP
1"NPT
Function
50
51
60
61
2W NC
Seals
1
NBR
1.47
Voltage
N
W/out coil
6
12
24
48
110
120
230
240
other
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
Connector
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
other
9
GEM-SOL Index
Technical Specifications
Function:
2/2 Way NC
Temperature range:
Fluid: 80 C max.
Ambient: -10 C to 50 C
Materials :
Kv(L/Min)
25
Line
Pressure
0.2 to 10
25
0.2 to 10
200
Size
Orifice
3/4"
1"
136
Diaphragm:
Reinforced NBR
Internal trim:
Stainless steel, Acetal, reinforced nylon
Manual override:
Brass screw
Flow adjusted by flow control handle.
Weight::
450 gr.
Media:
Mounting:
Coil Voltage:
DC 10W
115
Dimensions
65
95
1.48
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
A minimum pressure of 1 bar is required
for operation.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
Latch valves are available upon request.
How to Order
Example : GEM-HP-2201P-321
Is a GEM-SOL High pressure Pilot operated, Brass 1/4" BSP
2WNC, polyurethane seals, 24V AC 8W 60Hz with connector.
GEM-HP
Body
Brass
St.st
Function
Port
2
3
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
3/4"BSP
3/4"NPT
1"BSP
1"NPT
20
21
30
31
40
41
50
51
60
61
2W NC
2W NO
Seals
1
2
Polyurethane P
Viton
V
PTFE
T
1.49
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
Connector
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
other
9
GEM-SOL Index
Technical Specifications
Pressure and flow table NC
Function:
Ports size:
See table
Temperature range:
Fluid: max 80 C
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Main valve :
Brass -hot stamping
Size
Orifice
1/4"
3/8"
(mm)
Pressure
Kv(L/Min)
12
16
1 - 60
1/2"
12
3/4"
19
130
1"
25
200
35
St.St. 316
Solenoid Operator:
Size
Orifice
1/4"
(mm)
Seals:
Polyurethane, Viton, PTFE
Coil voltage:
DC 10W
Pressure
Kv(L/Min)
12
3/8"
1/2"
12
3/4"
19
130
1"
25
200
16
1 - 30
35
Dimensions
Size
1/4"-3/8" 58
32
10.5
118
91.5
22
58.9
69
38
13
130
102.5
22
64.9
3/4"
90
55
17
140
73.1
1"
100
65
21
151
78.1
1/2"
A
B
1.50
SV-04-09
GEM-SOL Index
Technical Info
GEM-SOL Index
22
1/4 BSP
10
22
40
66
19
30
Technical Info
GEM-SOL Index
BACCARA
Notes
Contact our technical department for more
information on valve and fluid compatibility.
To order valves manufactured to your
specific requirements, please contact
our technical department.
Specify if application is pressure or vacuum.
All valves are assembled with seal coil nut,
lower coil gasket and impregnated coil.
Options:
Supplied with mounting threads upon request.
Please specify when ordering.
vacuum
How to Order
Example : GEM-C-4011V-321
Is a GEM-SOL Chem-Sol, 1/2" BSP,
2WNC for vacuum, Viton seals, 24V AC
8W 60 Hz with connector.
GEM-C
Port
1/2" BSP
1/2" NPT
Function
40
41
2W NC
Flow direction
Pressure
Vacuum
Pressure
1
2
Seals
Viton
EPDM
1.53
Voltage
V
E
W/out coil
6
12
24
48
110
120
230
240
other
Connector
Power
0
1
2
3
4
5
6
7
8
9
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W50Hz
AC5.5W60Hz
0
1
2
3
4
5
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
surge
protection
with LED
0
1
2
3
other
4
5
6
GEM-SOL Index
Technical Specifications
Function:
2/2 Way NC
Ports size:
Orifice:
8mm
Kv:
18 L/min
Pressure:
See table
Temperature range:
Fluid: 5 C to max 50 C
Pressure Table - NC
Flow direction
not restricted
Flow direction
restricted
AC 8W
0 to 0.7 bar
Ambient: -10 C to 50 C
Materials:
Coil
Coil
Flow direction
not restricted
Flow direction
restricted
PVC
AC 8W
-1 to 0.5
-1 to 0.5
Diaphragm:
AC5.5W
-0.5 to 0.5
-0.8 to 0.5
DC10W
-0.4 to 0.5
-0.6 to 0.5
Main valve:
Viton, EPDM
Coil Voltage:
Dimensions
22
M 4x0.7 Deep 10
TYPx2
87
22
(optional)
32
62
1.54
SV-03-11
Technical Info
GEM-SOL Index
BACCARA
Notes
Contact our technical department to
get details on valve and fluid compatibility.
To order valves manufactured to your
specific requirements, please contact
our technical department.
Specify if application is pressure or vacuum.
vacuum
How to Order
Example : GEM-C-5011V-311
Flow direction
GEM-C
Port
3/4" BSP
3/4" NPT
Function
50
51
2W NC
Pressure
1
Vacuum
Pressure
Seals
1
2
Viton
EPDM
1.55
Voltage
V
E
W/out coil
24
110
230
other
Connector
Power
0
3
5
7
9
No coil
AC 18W
DC 38W
0
1
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge
protection
with LED
other
GEM-SOL Index
Technical Specifications
Pressure Table - NC
Function:
2/2 Way NC
Ports size:
Orifice:
14mm
Kv:
40 L/min
Pressure:
See table
Temperature range:
Fluid: 5 C to max 50 C
Flow direction
not restricted
AC / DC
0 to 3 bar
Flow direction
restricted
Ambient: 5 C to 50 C
Materials:
Coil
Coil
Flow direction
not restricted
Flow direction
restricted
AC / DC
-1 to 0.5
-1 to 0.5
Main valve:
PVC
Diaphragm:
Viton, EPDM
Coil Voltage:
Dimensions
55
18.5 TYPX2
106.5
46
NPT
3/4" BSP/NPT
Both sides
42
83
NPT
36
BSP
77
1.56
SV-03-10
Technical Info
GEM-SOL Index
BACCARA
Notes
The valve performances are a function of the
tube dimensions and hardness.
Please consult our technical sales department.
Maximum tube diameter: 9.5mm.
Valves are DC designated.
For AC, use rectifier connector.
GEM-P
Tube
Function
Voltage
Note:
(1)
1.57
Power
(1)
Connector
GEM-SOL Index
Technical Specifications
Function:
2/2 Way NC
Tubes:
Pressure range:
1 bar
Temperature range:
Materials :
Valve:
Aluminium
Solenoid:
See GEM-SOL operator
Coil voltage:
16
Dimensions
A
GEM-P-1
6.5
10
GEM-P-2..3
9.5
6.5
10
16
75
45.6
C
B
A
28
1.58
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
The valve performances are a function of the
tube dimensions and hardness.
Please consult our technical sales department.
Valves are DC designated.
For AC, use rectifier connector.
How to Order
Example : GEM-P-13-381
Is a GEM-SOL Pinch valve for 6x4 silicon
tube, 3W, 24V DC 14W with connector.
GEM-P
Tube
6x4
Function
1
3W
Voltage
3
6
12
24
48
110
120
230
240
other
Power
1
2
3
4
5
6
7
8
9
1.59
DC14W
Connector
8
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
surge protection
with LED
other
4
5
GEM-SOL Index
Technical Specifications
Function:
3/2 Way
Tubes:
6x4
Pressure range:
1 bar
Temperature range:
Materials in contact:
Valve:
Aluminium
Solenoid:
See GEM-SOL operator
Coil voltage:
Dimensions
1.60
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
This solenoid is designed to operate only
with a Baccara valve.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
How to Order
Example : LDOS - 21034N0-11
Is a LDOS Brass, 1/8" BSP, 3WNC, 2.0 orifice,
NBR, no manual override, 24V AC with connector.
LDOS
Body
Brass
St.st
Port
2
3
1/8"BSP
1/8"NPT
1/4"BSP
1/4"NPT
Function
10
11
20
21
3W NC
3W NO
3
4
Orifice
1.6
2.0
2.4
Manual
Override
Seals
3
4
5
NBR
Viton
EPDM
1.61
N
V
E
None
Voltage
24V AC
12V DC
1
2
Connector
without
with
0
1
GEM-SOL Index
Technical Specifications
Voltage :
Current :
Holding 15mA
Power:
0.3W
Delay Time:
See table
Connection:
Ambient temp:
-10 C to 60C
Pressure Table
Function
3WNC
3WNO
Protection class IP65 with connector
Orifice
Pressure
1.6
16
2.0
10
2.4
1.6
16
2.0
12
2.4
Conduit
Delay time (Sec)
Distance
at a nominal voltage (Km) Section (mm)
2.4
0.5
4-5
4.8
1.0
7.5
1.5
Dimensions
22
2X M5x0.8
DEEP 8
22
37
68
8.3
81.2
81.5
GEM-SOL
VALVE
19
93.5
1.62
SV-04-09
GEM-SOL Index
BACCARA
Notes
This solenoid is designed to operate only
with a Baccara valve.
No manual override should be designated.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
How to Order
Example : GEM-LDO-9-GEM-A-21035NO
The GEM-LDO is attached to a GEM-SOL direct operated Brass,
1/8 BSP, 3W NC, 2.4 orifice, NBR with no manual override.
GEM-LDO
Voltage
24 VAC & 9
12-24 VDC
1.63
Technical Info
GEM-SOL Index
Technical Specifications
-10C to 60C
Epoxy
Voltage
Conduit
Distance
section (mm2)
(km)
12 / 24
12
24
0.5
12
0.5
Dimensions
91
86
39
92
92
1.64
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
GEM-SOL Inline
1/8", 1/4" 2/2 Way NC , NO
General Description
This GEM-SOL solenoid valve is designed to be
mounted "IN LINE".
It is used mainly as a safety device on fuel systems
for motor vehicles. It can also be used in water, air
or oil systems.
Notes
Valves are inspected at general pressures
of 12 bar or less (see table). Valves for
higher pressures are available.
ADC valves are suitable to work only with
AC 8W or DC 10W coils.
Latch valves are available upon request.
Valves with 6mm orifice are DC only.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
GEM-I
Body
Hex.Brass 4
"Inline"
5
mounting
Port
1/8"BSP
1/8"NPT
1/4"BSP
1/4"NPT
Function
10
11
20
21
2W NC
2W NO
1
2
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
4.0 *
6.0 *
OUT
IN
IN
OUT
NO
NC
Voltage
Seals
1
2
3
4
5
6
7
8
NBR
Viton
EPDM
N
V
E
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
0
No coil
AC8W 50Hz 1
AC8W 60Hz 2
3
DC10W
AC5.5W 50Hz 4
AC5.5W 60Hz 5
7
DC5.5W
Connector
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
1.65
4
5
surge protection 6
with LED
other
* Hex body
0
1
2
3
GEM-SOL Index
Technical Specifications
Max.Pressure (bar) 2W NC Table
Function:
Ports size:
Orifice:
See table
Kv:
See table
Pressure range:
Temperature range:
Materials :
Orifice
Coil
Current/Power
0.8
1.6
2.4
3.0
4.0
6.0
ADC
40
30
17
10
1.1
See table
AC/8W DC/10W
45
37
20
12
1.8
Fluid: max 80 C
AC 5.5
40
32
16
0.5
Ambient: -10 C to 50 C
DC 5.5
35
30
12
0.5
Main valve :
1.7
3.5
4.5
Brass
Solenoid Operator:
Stainless steel 300 & 400 series
Coil
Current/Power
Seals:
NBR, Viton or EPDM
Weight (with coil):
228 gr
Media:
Coil voltage:
0.8
1.6
2.4
3.0
ADC
32
27
13
AC/8W DC/10W
35
32
18
12
1.6
3.2
3.8
Size (G)
1/8"
20
16
68
1/4"
23
18
88
Dimensions
Dimensions
61
31
1/8
1/8
38
49
1.66
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
ADC valves are suitable to work with
AC 8W or DC 10W coils.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
GEM-R
Body
Brass
Port
2
1/2"NF
Flare
5/8"NF
Flare
5/8" NF
O-ring
Function
1
2W NC
O-ring type
Orifice
2.4
Seals
5
N
NBR
Neoprene C
2
4
1.67
Flare type
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Connector
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
surge protection 6
with LED
other
9
GEM-SOL Index
Technical Specifications
Function:
2/2 Way NC
Orifice:
See table
Kv:
See table
Pressure range:
See table
Temperature range:
Fluid: max 80 C
Orifice
2.4
AC/8W DC/10W
30
3.5
Main valve :
Brass
Solenoid Operator:
Stainless steel 300 & 400 series
Seals:
NBR : for R-134a
NEOPRENE : for R12 & R22
Media:
Refrigeration fluids
Coil voltage:
DC 10W
Dimensions
O-ring type
Flare type
1.68
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Valves are inspected at general pressures
of 12 bar or less (see table). Valves for higher
pressure are available.
ADC valves are suitable to work only with
AC 8W or DC 10W coils.
GEM-N
Body
Alum.
Function
5
3WNC
Orifice
1.6
2.4
Manual
Override
Seals
3
5
NBR
Viton
N
V
None
Plastic
Slot
Knob
1.69
0
1
2
3
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W50Hz
AC5.5W60Hz
AC2.5W
DC5.5W
DC3.5W
Connector
0
1
2
3
4
5
6
7
8
0
without
1
with
with LED
2
with bi color 3
LED
flying leads 4
coil
with 1/2" Hub 5
Ex proof
6
other
9
GEM-SOL Index
Technical Specifications
Function:
3/2 way NC
Orifice:
See table
Kv:
See table
Pressure range:
See table
Temperature range:
Fluid: max 80 C
Orifice
1.6
2.4
ADC
15
AC/8W DC/10W
17
10
AC/5.5W
15
Manual Override:
Plastic or Brass
AC/2.5W DC/5.5/3.5W
10
Materials :
Main valve :
1.7
3.5
Aluminium
Solenoid Operator:
Stainless steel 300 & 400 series
Seals:
NBR, Viton
Media:
Air
Coil voltage:
Dimensions
1.70
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
1" valves are with male threaded ports.
When assembling valve, take care not to
tighten pipe connections excessively.
Valves are controlled by external
3/2 way valve.
How to Order
Example : GEM-E-4501N
Is a GEM-SOL external pilot operated
nylon, 3/4" BSP, 2W NC with NBR seals.
GEM-E
Body
Nylon
Port
4
3/4" BSP
3/4"NPT
1" BSP
1"NPT
Function
50
51
60
61
2W NC
Seals
1
1.71
NBR
GEM-SOL Index
Technical Specifications
Functions:
2/2 Way NC
Temperature range:
Fluid: max 80 C
Ambient: -10 to 50 C
Materials in contact:
Kv(L/Min)
25
Pressure
(bar)
0.2-10
25
0.2-10
200
Size
Orifice
(mm)
3/4"
1"
136
Diaphragm:
Reinforced NBR
Internal trim:
Stainless steel, Acetal, reinforced nylon
Manual override:
Brass screw
Flow adjusted by flow control handle
Weight:
450 gr.
Media:
Mounting:
Dimensions
1.72
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Pilot pressure should be at least 1 bar
higher than process fluid.
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
3/8 is not available for 3/2 way NO.
St.st. valves are available only in 2W.
3W NO
How to Order
Example : GEM-E-2202N-0
Is a GEM-SOL external pilot operated
Brass, 1/4" BSP, 2W NO with NBR seals, without
mounting bracket.
GEM-E
Port
Body (1)
Brass
St. St.
2
3
1/4" BSP
1/4" NPT
3/8" BSP
3/8" NPT
1/2" BSP
1/2" BSP
Function
20
21
30
31
40
41
2W NO
3W NO
2
4
1.73
Seals
NBR
Bracket (2)
N
without
with
0
1
GEM-SOL Index
Technical Specifications
Pressure and flow table
Functions:
Ports size:
See table
Temperature range:
Fluid: max 80 C
Ambient: -10 to 50 C
Materials in contact
with fluid:
Size
Orifice
(mm)
1/4"
3/8"
1/2"
12
Pressure
(bar)
Kv(L/Min)
12
0.5 - 10
16
35
Main valve:
Brass - hot stamping or St.st
Seals:
NBR
Media:
2W NO
Size
Mounting Bracket
A
Size
1/4"-3/8 58
36
1/4-3/8" BSP/NPT
1/4"
1/2" BSP/NPT
3/8", 1/2"
1/2"
69 47.5
15
25 4.5 11
14
20
25
32
20
30
22
25
33
40
13
3W NO
Size
1/4"
58
61
1/2"
69
77.5
1/4" BSP/NPT
1/8"BSP/NPT 25
1/8" BSP/NPT
1/8"BSP/NPT 30
32
M4 7
25
38
M5 9
30
Dimensions
2W NO
22
22
M5 DEEP 8
TYP x 2
3W NO
1/8 BSP
or NPT
1.74
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Pilot
Flow
How to Order
Example : GEM-E-2502N
Is a GEM-SOL external pilot operated
Brass, 3/4" BSP, 2W NO with NBR seals.
GEM-E
Body
Brass
St.st
Port
2
3
3/4" BSP
3/4"NPT
1" BSP
1" NPT
Function
50
51
60
61
2W NO
Seals
2
1.75
NBR
Viton
EPDM
N
V
E
GEM-SOL Index
Technical Specifications
Pressure and flow table
Functions:
2/2 Way NO
Ports size:
Size
Orifice
(mm)
See table
3/4"
20
Temperature range:
Fluid: max 80 C
1"
Ambient: -10 to 50 C
Kv(L/Min)
125
0.3 - 10
200
Materials in contact
with fluid:
25
Pressure
(bar)
Main valve:
Brass - hot stamping
Stainless steel - AISI 316
Seals:
NBR, Viton, EPDM
Media:
2W NO
Size
3/4"
90
17
1"
100 64
21
Dimensions
1.76
SV-04-09
GEM-SOL Index
BACCARA
How to Order
Example : GEM-T-21-51
Is a GEM-SOL digital Dual timer condendser timer with
1/4" NPT port, 110V AC coil and connector.
T : Dual Timer
T1 : Global Timer
GEM-T
Port
GEM-T1
w/out valve
1/8"BSP
1/8"NPT
1/4"BSP
1/4"NPT
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
3/4"BSP
3/4"NPT
Voltage
00
10
11
20
21
30
31
40
41
50
51
No coil
24VAC
48VAC
110VAC
120VAC
230VAC
240VAC
other
Connector
0
3
4
5
6
7
8
9
without
with
with LED
1.77
0
1
2
Technical Info
GEM-SOL Index
Technical Specifications
Valve Specifications
See table
Voltage Supply:
24 to 240 VAC
Valve
50 or 60 Hz
Digital Dual Condenser Timer (T):
Time ranges:
Off 0 - 24 hr
Valve size
GEM-SOL
Valve Type
Orifice
Kv(l/min)
1/8"
GEM-I
3.8
1/4"
GEM-I
3.8
3/8"
GEM-S
16
1/2"
GEM-S
12
35
3/4"
GEM-S
25
136
On 0 - 24 hr
Electric connection:
TIME ADJUSTMENT
Press SET for 2 seconds
Press ADJ to adjust ON time
Press SET
Press ADJ to adjust OFF-time seconds
Press SET
Press ADJ to adjust OFF-time minutes
Press SET
2 poles + 1 earth
Ambient temperature:
-10C to 50C
Weight:
64gr.
DIGITAL DISPLAY
Count down ON and OFF times.
Manual override: Press keys for 2 secs.
Dimensions
1.78
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Working Principle
The Solenoid Operator is used to create a magnetic
force. The balance between this force and the
returning spring at any current, is used to control
the plunger stroke which determines the valve opening.
The magnetic force is direct associated to the current
passing in the coil.
The fluid enters the valve below the seat. The fluid
pressure together with the magnetic force acts against
the return spring. Setting this spring will change the
minimum current needed to open the valve, and by that,
the minimum flow.
Notes
IN
OUT
Flow
How to Order
Example : GEM-PR-21015N0-1
Is a GEM-SOL Proportional direct operating,
Brass, 1/8" BSP 2WNC, 2.4 orifice, NBR,
without manual override, with connector.
GEM-PR
Body
Brass
St.st
Alum.
Port
2
3
5
1/8"BSP
1/8"NPT
1/4"BSP
1/4"NPT
Function
10
11
20
21
2WNC
Input Control
Orifice
0.8
1.2
1.6
2.0
2.4
3.0
4.0
Manual
Override
Seals
1
2
3
4
5
6
7
NBR
Viton
EPDM
E
Polyurethane P
PTFE
1.79
None
Connector
without
with
0
1
GEM-SOL Index
Technical Specifications
Function:
Ports size:
Orifice:
(2)
Kv :
Pressure range:
Temperature range:
Materials in contact
with fluids
2/2 Way NC
1/8" and 1/4" BSP & NPT
See table
See table
Vacuum to maximum pressure
~ see table
Fluid: -10C to 80C
Ambient: -10 C to 55 C
Main valve :
Aluminum, Brass,
Stainless steel 316
Solenoid Operator:
Stainless St. 300/400 series
Seals:
NBR, Viton, EPDM, Polyurethane,
PTFE
Guide Rings: PTFE
250 gr (aluminum base)
Neutral gases, water, oil
2
Max. Viscosity 21mm /s
In any position, preferably upright
0.8
1.2
1.6
2.0
2.4
3.0
4.0
16
12
10
3.5
Kv (l/min)
0.6
1.1
1.7
2.5
3.5
4.5
(3)
Electrical Specification:
The Control Parameter is the current in the Coil!
Operating Current:
100-500 [mA]
Standard voltage 24 VDC(=)
Protection Class:
IP65 with connector
Coil terminal:
Per DIN 43650-a, or
2 flying leads 18AWG
300mm length.
Dimensions
Mounting Bracket
BRASS / St.St.
ALUMINUM
1.80
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
A minimum differential pressure
of 0.3 bar is required for operation.
To order valves manufactured to
your specific requirements,
please contact our technical
sales department.
3/4", 1"
1-1/2", 2"
IN
IN
How to Order
Example : GEM-D-1501N0-311
GEM-D
Body
Al
Function
Port
5
3/4"BSP
3/4"NPT
1" BSP
1" NPT
1-1/2"BSP
1-1/2"NPT
2"BSP
2"NPT
50
51
60
61
70
71
80
81
2W NC
OUT
OUT
Manual
Override
Seals
N
NBR
1.81
None
Voltage
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
Connector
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
0
1
2
3
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
surge
protection
with LED
other
0
1
2
3
4
5
6
9
GEM-SOL Index
Technical Specifications
Valve specification NC Type
Function:
2/2 way NC
Ports size:
See table
Temperature range:
Materials in contact
with fluid :
Port
Connection
Main valve :
Aluminium
3/4"
20
130
0.3-15
300
1"
25
200
0.5-15
330
1-1/2"
40
540
0.5-10
1230
2"
50
690
0.5-10
1860
Solenoid Operator:
Stainless steel 300 & 400 series
Seals:
Diaphragm: reinforced elastomer
NBR
Media:
Air
Coil voltage:
DC 10W
Dimensions
Size
Size
3/4"
73.5
55
123
31
36
46.2
3/4 BSP/NPT
1-1/2"
1"
82.2
65
126 28.25 40
46.2
1 BSP/NPT
2"
100 150.6
30
77
38
92
46.2
126
2 BSP/NPT
G TYPX2
B
E
G TYPX2
A
1.82
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
A minimum differential pressure
of 0.3 bar is required for operation.
To order valves manufactured to
your specific requirements,
please contact our technical
sales department.
IN
OUT
How to Order
Example : GEM-E-1501N
Is a GEM-SOL External Pilot operated Al.
3/4"BSP, 2W NC, NBR seals.
GEM-E
Body
Al
Port
5
3/4"BSP
3/4"NPT
1" BSP
1" NPT
1-1/2"BSP
1-1/2"NPT
2"BSP
2"NPT
Function
50
51
60
61
70
71
80
81
2W NC
Seals
N
NBR
1.83
GEM-SOL Index
Technical Specifications
Function:
2/2 way NC
Ports size:
See table
Temperature range:
3/4"
20
130
0.3-15
300
1"
25
200
0.5-15
330
1-1/2"
40
540
0.5-10
1230
2"
50
690
0.5-10
1860
Main valve :
Aluminium
Solenoid Operator:
Stainless steel 300 & 400 series
Seals:
Diaphragm: reinforced elastomer
NBR
Media:
Air
Dimensions
Size
1-1/2"
126
30
38
92
2 BSP/NPT
95.1
2"
100 99.1
G TYPx2
E
A
1.84
SV-04-09
Technical Info
GEM-SOL Index
BACCARA
Notes
Valves are inspected at general pressures
of 12 bar or less (see table). Valves for
higher pressures are available.
ADC valves are suitable to work only with
AC 8W or DC 10W coils.
To use diverting function with DC, use
special order code.
Latch valves are available upon request.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
How to Order
Example : GEM-U-21095N-311
NC IN
Selector IN 1
OUT
EX NO
Diverting OUT 2
Diverting IN
2
NO IN
Selector IN 2
GEM-U
Body
Brass
Port
2
1/8" BSP
1/8" NPT
1/4" BSP
1/4" NPT
Function
10
11
20
21
divertor (1) 5
general
9
purpose
Orifice
1.6
2.0
2.4
3.0
3
4
5
6
1.85
Voltage
Seals
NBR
Viton
EPDM
N
V
E
W/out coil
6
12
24
48
110
120
230
240
other
0
1
2
3
4
5
6
7
8
9
EX NC
Diverting OUT 1
Power
No coil
AC8W 50Hz
AC8W 60Hz
DC10W
AC5.5W 50Hz
AC5.5W 60Hz
Connector
0
1
2
3
4
5
without
with
with LED
with bi color
LED
flying leads
coil
with 1/2" Hub
0
1
2
3
4
5
GEM-SOL Index
Technical Specifications
Function:
Coil
Current/Power
Orifice
1.6
2.0
2.4 3.0
AC/8W
14
6.5
Ports size:
Orifice:
See table
Kv:
See table
AC/5.5W
11
5.5
Pressure range:
See table
* DC 10W
10
5.5
Temperature range:
Fluid: max 80 C
1.7
2.5
Ambient: -10 C to 50 C
Materials :
3.5 4.5
Main valve :
Brass
Solenoid Operator:
Stainless steel 300 & 400 series
Coil
Current/Power
Orifice
1.6
2.0
2.4
3.0
Seals:
DC 10W
12
10
5.5
2.5
3.5
4.5
336 gr
Media:
Coil voltage:
10%
Dimensions
82.3
46.5
44
38.5
1.86
SV-04-09
Main Contents
Technical Info
GEVA-80 Index
BACCARA
GEVA 80 Coil
General Description
G80 coils are designed to withstand industrial
ambient conditions.
The coils are constructed according to
EN 60204.1 and used on G80 operators.
Notes
The coil should not be energized without
being mounted on operator.
The coils are designed to operate at 10%
of rated voltage.
The coils are suitable to operate at 100% duty
cycle, however when using high power coils for
a long time, the temperature developed may affect
solenoid seals. Viton seals or lower power coils
are advised.
For outdoor or high humidity application, please
consult our technical sales department.
How to Order
G80-B
Voltage
Power
Connector
Example : G80-B-331
6
12
24
110
230
AC
DC
50 Hz 60 Hz
V 7.5 4
6
12
24
110
230
3 6.5 3
2.1
1
2
3
5
7
AC7.5W 50Hz
AC6W 60Hz
DC 6.5W
AC4W 50Hz
AC3W 60Hz
DC 3W
1
2
3
4
5
7
without
with
with bi
color LED
with LED and
surge
protection
flying leads
coil
other
0
1
2
3
4
9
GEVA-80 Index
Technical Specifications
Electrical specifications
Standard voltages:
Variation in voltage:
Duty cycle:
100%
Ambient temperature:
-20 C to 70 C
Isolation class:
F 155
Protection grade:
Coil terminal:
Connector:
Assembly:
On a valve, 4 positions at 90
Fixing:
Weight:
Approx 51gr.
Power Ratings
High
50Hz
60Hz
12.5
Holding (VA)
8.8
Low
DC
50Hz
60Hz
10.5
7.5
6.5
4.2
DC
6.5
Dimensions
16
+0.05
0
6.4 0.1
23.1
29.5
1.5
8.15
22
9.15 0.05
18
11
37
2.2
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
The coil should not be energized without
being mounted on operator.
The coils are designed to operate at 10%
of rated voltage.
The coils are suitable to operate at 100% duty
cycle, however when using high power coils for
a long time, the temperature developed may affect
solenoid seals. Viton seals or lower power coils
are advised.
For outdoor or high humidity application, please
consult our technical sales department.
How to Order
G80-BW
Voltage
Power
Connector
Example : G80-BW-331
6
12
24
110
230
2.3
1
2
3
5
7
AC5W 50Hz
AC4W 60Hz
DC 4.5W
AC3W 50Hz
AC2W 60Hz
DC 2.5W
1
2
3
4
5
7
without
with
with bi
color LED
with LED and
surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Electrical specifications
Standard voltages:
Variation in voltage:
Duty cycle:
100%
Coil temperature:
-20 C to 70 C ambient
Isolation class:
F 155
Protection grade:
Coil terminal:
Connector:
Assembly:
On a valve, 4 positions at 90
Fixing:
Power Ratings
High
50Hz
60Hz
Holding (VA)
Low
DC
50Hz
60Hz
7.5
5.5
4.5
4.2
2.5
4.5
DC
2.5
Dimensions
15
30
0.8 0.03
18.8 0.1
6 0.1
0
9 -0.4
29.5
16
8
9
+0.4
12 -0.2
22
14
48
2.4
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
GEVA 80 Operator
General Description
The operator is designed to be assembled on a valve
or a counterpart to set up a solenoid valve.
According to the operator and valve construction,
various functions are available.
The G80 operators may be used with alternate or
direct current.
Notes
Operator cavity should be designed according
to our specifications, see drawing on the next
page.
Operator for DC is without shading ring and
may not be used for AC.
When assembling coil, take care not to tighten
nut excessively.
Valves are inspected at general pressure of up
to 10 bar. Higher pressures are available, please
consult our technical sales department.
For applications where abnormal conditions exist
and for fluids other than air, water or inert gases,
please consult our technical sales department.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
2W NOa
thru base
How to Order
3W NOa
thru base
3W
2W
Example : G80-O-2W210-N-341
Is a GEVA 80 Operator, Brass tube, 2W NC, DC,
NBR, 24V DC 6.5W with connector.
Example : G80-O-002302-N-341
Is a GEVA 80 Operator, M5, Brass tube, 3W NC, DC,
1.2 orifice, NBR seals, 24V DC 6.5W with connector
2W
G80-O
2W
Tube
Brass
St.st
3W
G80-O
Port
Function
2
3
Tube
00 Brass
M5
#10UNF
01 St.st
1/8 BSP(2) 10
2W NC
2WNOa
1
2a
Function
2
3
Current
DC
AC
0
1
Current
3 DC
3W NC
4 AC
3W NO
3W NOa 4a
0
1
Voltage
Seals
NBR
Viton
EPDM
Kalrez(1)
Orifice
None(2W)
1
1.2
1.6
2.5
0
1
2
3
N
V
E
K
W/out coil
6
12
24
110
230
0
1
2
3
5
7
Power
No coil
AC7.5W 50Hz
AC 6W 60Hz
DC 6.5W
AC 4W 50Hz
AC 3W 60Hz
DC 3W
Connector
0
1
2
3
4
5
7
without
with
with bi color
LED
with LED and
surge
protection
other
0
1
2
3
9
GEVA-80 Index
Technical Specifications
Threads on
operator tube:
Function:
Orifice size:
1, 1.2, 1.6mm
Pressure range(bars):
Standard up to 10
muffler etc.
Temperature range:
Fluid: max 80 C
Operator assembly:
Ambient: -10 C to 50 C
Response time:
5 - 12 msec
one M8 nut.
Cycling rate:
Materials in contact
with fluid :
Coil data:
Standard voltage:
See "coil"
Operator :
Brass or Stainless steel
series AISI 300 & 400
Shading ring:
copper
Orifice:
Stainless steel
Weight:
18 gr (without coil)
Media:
Dimensions
Operator seating
2.6
SV-01-10
Technical Info
GEVA-80 Index
BACCARA
Notes
Operator cavity should be designed according
to our specifications, see drawing on the next
page.
Operator for DC is without shading ring and
may not be used for AC.
When assembling coil, take care not to tighten
nut excessively.
Valves are inspected at general pressure of up
to 10 bar. Higher pressures are available, please
consult our technical sales department.
For applications where abnormal conditions exist
and for fluids other than air, water or inert gases,
please consult our technical sales department.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
2W
3W
How to Order
Example : G80-OM-2W210-N-331
Is a GEVA 80 operator M12, Brass tube, 2WNC, DC,
NBR seals, 24V DC 6.5W with connector
2W NOa
Example : G80-OM-002302-N-331
3W NOa
2W
G80-OM
2W
Tube
Brass
St.st
Function
2
3
2W NC
2W NO
1
2a
Current
DC
AC
NBR
Viton
EPDM
Teflon
Kalrez(1)
0
1
3W
G80-OM
Voltage
Seals
N
V
E
T
K
(1) 2W NC only
Port
None (2W) 00
M5
#10UNF 01
Tube
Brass
St.st
Function
2
3
3W NC
3W NO
3W NO
3
4
4a
Current
DC
AC
Orifice
0
1
1
1.2
1.6
2.7
1
2
3
W/out coil
6
12
24
110
230
0
1
2
3
5
7
Power
No coil
0
AC7.5W 50Hz 1
AC6W 60Hz 2
DC 6.5W
3
AC 4W 50Hz 4
AC 3W 60Hz 5
DC 3W
7
Connector
without
with
with bi color
LED
with LED
and surge
protection
flying leads
coil
other
0
1
2
3
4
9
GEVA-80 Index
Technical Specifications
Function:
Threads on
Orifice size:
1, 1.2, 1.6mm
operator tube:
Pressure range(bars):
Standard up to 10
muffler etc.
Temperature range:
Operator assembly:
Response time:
5 - 12 msec
one M8 nut.
Cycling rate:
Materials in contact
with fluid :
Coil data:
Standard voltage:
See "coil"
Operator :
Brass or Stainless steel
series AISI 300 & 400
Shading ring:
copper
Orifice:
Stainless steel
Weight:
18 gr (without coil)
Media:
Dimensions
Operator seating
Spring
2.8
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Operator cavity should be designed according
to our specifications, see drawing on the next
page.
Operator for DC is without shading ring and
may not be used for AC.
When assembling coil, take care not to tighten
nut excessively.
Valves are inspected at general pressure of up
to 10 bar. Higher pressures are available, please
consult our technical sales department.
For applications where abnormal conditions exist
and for fluids other than air, water or inert gases,
please consult our technical sales department.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
2W
How to Order
3W
Example : G80-OU-2W210-N-331
Is a GEVA 80 3/4" UNEF operator, Brass tube,
2WNC, DC, NBR seals, 24V DC 6.5W with connector.
Example : G80-OU-003302-N-331
Is a GEVA 80 3/4" UNEF operator, M5 port, St.st tube,
3WNC, DC,1.2 orifice, NBR seals, 24V DC 6.5W with connector.
2W
G80-OU
2W
Tube
Brass
St.st
2
3
Function
2W NC
2W NO
1
2a
Current
DC
AC
0
1
NBR
Viton
EPDM
3W
G80-OU
Port
M5
#10UNF
Tube
00 Brass
01 St.st
2
3
Function
3W NC
3W NO
3W NO
through
base
3
4
4a
Current
DC
AC
0
1
Voltage
Seals
Orifice
1
1.2
1.6
2.9
1
2
3
N
V
E
W/out coil
6
12
24
110
230
0
1
2
3
5
7
Power
No coil
AC7.5W 50Hz
AC 6W 60Hz
DC 6.5W
AC 4W 50Hz
AC 3W 60Hz
DC 3W
Connector
0
1
2
3
4
5
7
without
with
with bi color
LED
with LED
and surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Function:
Threads on
Orifice size:
1, 1.2, 1.6mm
operator tube:
Pressure range(bars):
Standard up to 10
muffler etc.
Temperature range:
Fluid: Max 80 C
Coil data:
Ambient: -10 C to 50 C
Standard voltage:
See "coil"
Response time:
5 - 12 msec
Cycling rate:
Materials in contact
with fluid :
Operator :
Brass or Stainless steel
series AISI 300 & 400
Shading ring:
copper
Orifice:
Stainless steel
Weight:
18 gr (without coil)
Media:
Dimensions
Operator seating
2.10
SV-01-10
Technical Info
GEVA-80 Index
BACCARA
Notes
Operator cavity should be designed according
to our specifications, see drawing on the
previous page.
These operators are compatible with all G80 valves
at 12 and 24V DC. Use "L" as the power indicator.
When assembling coil, take care not to tighten
nut excessively.
Valves are inspected at general pressure of up
to 10 bar. Higher pressures are available, please
consult our technical sales department.
For applications where abnormal conditions exist
and for fluids other than air, water or inert gases,
please consult our technical sales department.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G80-OL-002302N-3L1
Is a GEVA 80 latch operator, M5 port, Brass tube, 3WNC, 1.2 orif
24V DC Latch with connector
G80-OL
Type
Port
"O"ring Nil
type
M12
M
3/4 UNEF U
00
M5
#10UNF 01
1/8"BSP 10
Tube
Brass
St.st
2
3
Function
Orifice
1
3
4
None(2W)
1
1.2
1.6
2W NC
3W NC
3W NO
2.11
Voltage
Seals
0
1
2
3
NBR
Viton
EPDM
N
V
E
W/out coil
6
12
24
0
1
2
3
Power
No coil
Latch
Connector
0
L
without
with
0
1
GEVA-80 Index
Technical Specifications
Function:
Threads on
Orifice size:
1, 1.2, 1.6mm
operator tube:
Pressure range(bars):
Standard up to 10
Temperature range:
Fluid: Max 80 C
Operator assembly:
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Coil data:
Standard voltage:
See "coil"
Operation:
Stainless steel
Weight:
18 gr (without coil)
Media:
technical information
section.
38.9
29.5
Dimensions
22
17
28
2.12
SV-01-10
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 4 positions, at 90 apart.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
2
1
NC
G80-A
Body (1)
Al
Brass
St.st
1
2
3
Port
M5
#10UNF
1/8"BSP
1/8"NPT
Function
00
01
10
11
2W NC
2WNO
1
2
Orifice
1
1.2
1.6
2(2)
2.4(2)
3.0(2)
1
2
3
4
5
6
Manual
override
Seals
NBR
Viton
EPDM
Kalrez(3)
2.13
N
V
E
K
None
plastic
0
1
NO
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
0
AC7.5W50Hz 1
AC6W60Hz 2
DC6.5W
3
AC4W50Hz 4
AC3W60Hz 5
DC3W
7
Connector
without
with
with bi
color LED
with LED
& surge
protection
other
0
1
2
3
9
GEVA-80 Index
Technical Specifications
Max. Pressure (Bar) 2W NC Table
Function:
2/2 Way NC or NO
Port size:
Coil
Current/Power
Orifice (mm)
1
1.2
1.6
2.4
3.0
AC - 7.5W
40
35
35
12
10
AC - 4W
40
30
15
than 3 E
DC - 6.5W
40
35
20
12
10
DC - 3W
40
30
15
2.5
0.5
0.65
1.2
1.6
Ambient: -10 C to 50 C
Materials (in contact
with media) :
Tube :
Brass or AISI 303 for St.st valves
Plunger & upper pole:
Coil
Current/Power
Orifice (mm)
1.2 1.6
430 FR
AC - 4W
15
10
Seals:
DC - 3W
15
10
0.4
0.7
Base:
Al-6061, AISI 303 or Brass
Responded time:
5 - 12msec
Weight:
50 gr (aluminium valve)
Electrical specifications
Standard voltages:
Duty cycle:
100%
6, 12, 24V DC
Variation in voltage:
Dimensions
2X M3 DEEP 6
2.14
Port
M5/10 UNF
5.5
51.5
1/8"
10
58.5
SV-04-09
GEVA-80 Index
Technical Info
(1)
2.15
GEVA-80 Index
1.2
1.6
0.4
0.7
PA 6.6
2.16
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for higher
pressure are available upon special request. See table for
maximum pressures.
The valves are AC or DC designated.
The coil plug can rotate 2 positions at 180 .
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
Inline
Angle
How to Order
Flow
Example : G80-A-A1011V-020
Flow
G80-A
Body(1)
Inline
Angle
G
A
Function
Port
1/8" BSP
1/8" NPT
1/4" BSP
1/4" NPT
10
11
20
21
2W NC
Orifice
1
1.2
1.6
2
2.4
Seals
1
2
3
4
5
NBR
Viton
EPDM
2.17
Voltage
N
V
E
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
0
No coil
AC7.5W50Hz 1
AC6W60Hz 2
3
DC6.5W
AC4W50Hz 4
AC3W60Hz 5
7
DC3W
Connector
without
with
with bi-color
LED
with LED
and surge
protection
other
0
1
2
3
9
GEVA-80 Index
Technical Specifications
Function:
2/2 Way NC
Port size:
Media:
2W NC Table
Coil
Current/Power
Orifice (mm)
1.2
1.6
2
2.4
AC - 7.5W
40
35
35
12
10
AC - 4W
40
30
15
DC - 6.5W
40
35
20
12
10
DC - 3W
40
30
15
0.5
0.65
1.2
1.6
Temperature range:
freezing)
Ambient: -10 C to 50 C
Materials (in contact
with media) :
Tube :
Brass
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM
Responded time:
5 - 12(msec)
Weight:
52gr.
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
24
2.18
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves
for higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 4 positions at 90 apart.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G80-H-1s12N1-331
Is a GEVA 80 direct operated HF valve, aluminium base
with St.st tube, 2WNC, 1.2mm orifice, NBR seals,
with manual override, 24V DC 6.5W, with connector.
G80-H
Body (1)
Al.
Function
2W NC
Orifice
1
1.2
1.6
Manual
Override
Seals
1
2
3
NBR
Viton
EPDM
N
V
E
None
with
G80-HW
(1) For St.st tube add "s"
2.19
0
1
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
Connector
No coil
0
AC7.5W50Hz 1
AC6W60Hz 2
DC6.5W
3
AC4W50Hz 4
AC3W60Hz 5
DC3W
7
without
0
with
1
with bi-color 2
LED
3
with LED
and surge
protection
9
other
GEVA-80 Index
Technical Specifications
Function:
2/2 Way NC
Orifice
1.0
1.2
1.6
AC - 7.5W
40
35
35
Media:
Air
AC - 4W
40
30
15
Temperature range:
DC - 6.5W
42
35
20
DC - 3W
40
30
15
0.5
0.65
1.2
freezing)
Ambient: -10 C to 50 C
Tube :
Brass or AISI 303 for St.st valves
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM
Base:
AI-6061, AISI 303 or Brass
Responded time:
5 - 12(msec)
Weight:
50gr.
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
W
G80 - H
20
70
56.5
G80 - HW
25
75
61.5
Valve
2.20
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 4 positions at
90 apart.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
When ordering a latch valve please contact
our technical sales department.
1/8" adaptor available.
NC Ex
NO In
NC Out
NO
Ex NO
In NC
How to Order
Example : G80-A-11032V1-331
Is a GEVA 80 direct operated valve, aluminium base,
1/8"BSP, 3W NC, 1.2mm orifice with Viton seals,
plastic manual override, 24V DC 6.5W with connector.
G80-A
Body(1)
Port
1
2
3
M5
10UNF
1/8"BSP
1/8"NPT
Alum.
Brass
St.st
Function
00
01
10
11
3W NC
3WNO
3
4
Orifice
1
1.2
1.6
Manual
override
Seals
1
2
3
NBR
Viton
EPDM
2.21
N
V
E
None
plastic
0
1
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Latch
Connector
0
1
2
3
4
5
7
L
without
with
with bi
color LED
with LED
& surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Function:
3/2 Way NC or NO
Port size:
Media:
Orifice (mm)
1.2
1.6
AC - 7.5W
15
12
10.5
AC - 4W
12
10
DC - 6.5W
15
12
10.5
DC - 3W
12
10
0.5
0.65
than 3 E
Temperature range:
3W NC Table
freezing)
Ambient: -10 C to 50 C
Materials (in contact
with media) :
Tube :
3W NO Table
Coil
Current/Power
AC - 7.5W
12
430 FR
AC - 4W
10
DC - 6.5W
12
DC - 3W
10
0.4
0.7
Seals:
NBR, Viton, EPDM
Base:
5 - 12msec
Weight:
Orifice (mm)
1.2
1.6
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
2X M3 DEEP 6
M5/10 UNF
5.5
51.5
1/8"
10
58.5
PORT
2.22
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
When ordering a latch valve please contact
our technical sales department.
NC EX
NO IN
3
NO EX
How to Order
NC/NO
OUT
Example : G80-A-41032V0-020
NC IN
G80-A
Body (1)
Plastic
Port
1/8"BSP 10
1/8"NPT 11
Function
3W NC
3WNO
3
4
Orifice
1.2
1.6
2
3
Manual
override
Seals
NBR
Viton
EPDM
2.23
N
V
E
None
plastic
0
1
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
0
No coil
AC7.5W50Hz1
AC6W60Hz 2
3
DC6.5W
AC4W50Hz 4
AC3W60Hz 5
7
DC3W
L
Latch
Connector
without
with
with bi
color LED
with LED
& surge
protection
flying leads
coil
other
0
1
2
3
4
9
GEVA-80 Index
Technical Specifications
3/2 Way NC or NO
Port size:
Coil
Current/Power
Function:
Media:
Orifice (mm)
1.2
1.6
1
AC - 7.5W
15
12
10.5
AC - 4W
12
10
DC - 6.5W
15
12
10.5
DC - 3W
12
10
LATCH
15
12
10.5
0.65
Temperature range:
3W NC Table
Tube :
Coil
Current/Power
Orifice (mm)
1.2
1.6
430 FR
AC - 7.5W
12
Seals:
AC - 4W
10
DC - 6.5W
12
DC - 3W
10
0.4
0.7
3W NO Table
5 - 12msec
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
Manual
Override
2.24
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
General Description
These valves are based on the GEVA 80 operator with 8mm
diameter plunger. Due to its relatively low power consumption
the valve can be directly operated from an electronic controller
The valves are mainly in pneumatic applications as a pilot valve
but can be used for gas, water and light oils.
Notes
Valves are 100% inspected at 10 bar. Valves for higher
pressure are available upon special request.
Angle
See table for maximum pressures.
NC EX
NO IN
The valves are AC or DC designated.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
Options:
Adaptor
Aluminium coil nut
Inline
NC EX
NO IN
NC IN
NC/NO
OUT
How to Order
NC IN
NC/NO
OUT
NO EX
NO EX
Example : G80-A-A1031V-020
Is a GEVA 80 Compact direct operated valve,
angle type base, 1/8" BSP, 3WNC, 1mm orifice,
Viton seals, without coil, AC 6W 60Hz and without connector.
G80-A
Body(1)
Inline
Angle
G
A
Port(2)
1/8" BSP
1/8" NPT
1/4" BSP
1/4" NPT
10
11
20
21
Function
3W NC
3W NO
3
4
Orifice
1
1.2
1.6
1
2
3
Voltage
Seals
NBR
Viton
EPDM
2.25
N
V
E
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
0
No coil
AC7.5W50Hz 1
AC6W60Hz 2
3
DC6.5W
AC4W50Hz 4
AC3W60Hz 5
7
DC3W
Connector
without
with
with bi-color
LED
with LED
and surge
protection
flying leads
coil
other
0
1
2
3
4
9
GEVA-80 Index
Technical Specifications
Function:
Port size:
Media:
1.2
1.6
AC - 7.5W
15
12
10.5
AC - 4W
12
10
DC - 6.5W
15
12
10.5
DC - 3W
12
10
0.5
0.65
than 3 E
Temperature range:
Orifice (mm)
1
freezing)
Ambient: -10 C to 50 C
Coil
Current/Power
Tube :
Brass
Orifice (mm)
1.2
1.6
AC - 7.5W
12
430 FR
AC - 4W
10
Seals :
DC - 6.5W
12
DC - 3W
10
0.4
0.7
Responded time:
5 - 12(msec)
Weight:
52gr.
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
or #10UNF
22
or #10UNF
2.26
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves
for higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 4 positions at 90 apart.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
Options:
Adaptor
Aluminium coil nut
How to Order
Example : G80-H-132N1-331
Is a GEVA 80 direct operated HF valve,
3WNC, 1.2mm orifice, NBR seals, with manual
override, 24V DC 6.5W, with connector.
Body (1)
G80-H
Al.
G80-HW
Function
Orifice
3W NC
1.2
1.6
2
3
Manual
Override
Seals
NBR
Viton
EPDM
Kalrez
N
V
E
K
None
with
2.27
0
1
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Connector
0
1
2
3
4
5
7
without
with
with bi-color
LED
with LED
and surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Max. Pressure (Bar) 3W NC Table
Function:
3/2 Way NC
Coil
Current/Power
Orifice
1.2
1.6
AC - 7.5W
12
10.5
Media:
Air
AC - 4W
10
Temperature range:
DC - 6.5W
12
10.5
DC - 3W
10
freezing)
Ambient: -10 C to 50 C
Tube :
Brass or AISI 303 for St.st valves
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM, Kalrez
Base:
AI-6061, AISI 303 or Brass
Responded time:
5 - 12(msec)
Weight:
50gr.
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
W
G80 - H
20
70
56.5
G80 - HW
25
75
61.5
Valve
2.28
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 2 positions at
180 apart.
The coil plug can rotate 2 positions at 180.
Each two units are joined together by two specific
screws. For the "first" stand a different kit of screws
is used.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
EX
OUT
IN
"
G80-C Stations
Specify
number
00-nn
Body (1)
Mazak
Port
1/8"BSP 10
1/8"NPT 11
Function
2W NC
3WNC
1
3
Orifice
1.2
1.6
2
3
Manual
override
Seals
NBR
Viton
EPDM
2.29
N
V
E
plastic
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Connector
0
1
2
3
4
5
7
without
with
with bi
color LED
with LED
& surge
protection
other
0
1
2
3
9
GEVA-80 Index
Technical Specifications
Max. Pressure (Bar) 2W, 3W NC Table
Function:
Port size:
Media:
Coil
Current/Power
AC - 7.5W
15
12
10.5
AC - 4W
12
10
DC - 6.5W
15
12
10.5
DC - 3W
12
10
0.5
0.65
Temperature range:
Orifice (mm)
1
1.2 1.6
freezing)
Ambient: -10 C to 50 C
Materials (in contact
with media) :
Tube :
Responded time:
5 - 12msec
Weight:
Electrical specifications:
Seals:
Standard voltages:
Mazak
Duty cycle:
100%
Variation in voltage:
Dimensions
60.2
M4x0.7
DEEP 5
TYPx2
1.2
1.2
1.2
21.5
BSP
1/8
BSP
1/8
BSP
1/8
4.5
14
(1)
10.3
65
78.3
M5x0.8
PUSH
PUSH
1/8" BSP/NPT
DEEP 7
BOTH ENDS
7.3
18.2
PUSH
12
11.5
23 TYP
1/8" BSP/NPT
DEEP 7
23 x Stations
2.30
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 2 positions at
180 apart.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G80-M-081s1033N-311
Is a GEVA 80 8 station manifold, aluminium body with St.st. tube
1/8" BSP, 3W NC, 1.6mm orifice with NBR seals,
24V AC 7.5W 50Hz, with connector.
G80-M
#
Stations
Specify
00-12
Body (1)
Alum.
Brass
St.st
1
2
3
Port
M5
10UNF
1/8"BSP
1/8"NPT
Function
00
01
10
11
2WNC
3W NC
Specify
1
3
9
Orifice
1.2
1.6
2.31
2
3
Voltage
Seals
NBR
Viton
EPDM
Kalrez
N
V
E
K
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Connector
0
1
2
3
4
5
7
without
with
with bi
color LED
with LED
& surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Max. Pressure (Bar)2W, 3W NC Table
Function:
Port size:
Media:
Orifice (mm)
1.2
1.6
AC - 7.5W
12
10.5
AC - 4W
10
DC - 6.5W
12
10.5
DC - 3W
10
0.65
Temperature range:
Coil
Current/Power
freezing)
Ambient: -10 C to 50 C
Materials (in contact
with media) :
Tube :
Brass or AISI 303 for St.st valves
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM, Kalrez
Base:
Al-6061, AISI 303 or Brass
Responded time:
5 - 12msec
Weight:
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
Station
2
3
4
5
6
7
8
9
10
11
12
2.32
Station
L(mm)
60
83
106
129
152
175
198
221
244
257
270
X(mm)
53
76
99
122
145
168
191
214
237
250
263
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 4 positions at
90 apart.
The coil plug can rotate 2 positions at 180 .
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G80-X-11094V0-330
Is a GEVA 80 direct operated general purpose valve,
aluminium base, 1/8, 3W, 2mm orifice with Viton seals,
without manual override, 24V DC 6.5W 60Hz and without connector.
G80-X
Body
Alum.
(1)
Port
1/8"BSP
1/8"NPT
Function
10
11
general
purpose
Orifice
1.2
1.6
2
2.4
Seals
2
3
4
5
NBR
Viton
EPDM
Kalrez
2.33
Manual
override
N None
V
E
K
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Connector
0
1
2
3
4
5
7
without
with
with bi
color LED
with LED
& surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Function:
Port size:
1.2
AC - 7.5W
12
3.5
DC - 6.5W
12
3.5
0.65
1.2
1.6
2.0
Media:
3W NC Table
Coil
Current/Power
Orifice (mm)
1.6
2
2.4
than 3 E
Temperature range:
Tube :
Brass
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM, Kalrez
Base:
Al-6061
Responded time:
5 - 12msec
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
14
M3 DEEP 6
TYP x 2
31.75
22
1/8 BSP
TYP x 3
9.85
20
40
19.15
78.7
15
2.34
SV-05-10
Technical Info
GEVA-80 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 2 positions at
90 apart.
The coil plug can rotate 2 positions at 180.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G80-MX-0611094V0-330
Is a GEVA 80 6 station direct operated general purpose
manifold, aluminium base, 1/8" BSP, 3W , 2mm orifice
with Viton seals, without manual override, 24V DC coil,
6.5W and without connector.
#
G80-MX Stations
Specify
00-12
Body (1)
Alum.
Port
1/8"BSP 10
1/8"NPT 11
Function Orifice
general 9
purpose
1.2
1.6
2
2.4
2
3
4
5
2.35
Manual
override
Seals
NBR
Viton
EPDM
Kalrez
N
V
E
K
None
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
0
AC7.5W50Hz 1
AC6W60Hz 2
DC6.5W
3
AC4W50Hz 4
AC3W60Hz 5
DC3W
7
Connector
without
with
with bi
color LED
with LED
& surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Function:
Port size:
Media:
3W NC Table
Coil
Current/Power
1.2
1.6
2.4
AC - 7.5W
12
3.5
DC - 6.5W
12
3.5
0.65
1.2
1.6
2.0
Orifice (mm)
than 3 E
Temperature range:
Tube :
Brass
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM, Kalrez
Base:
Al-6061
Responded time:
5 - 12msec
Electrical specifications
Standard voltages:
6, 12, 24V DC
Duty cycle:
100%
Variation in voltage:
Dimensions
"X"
12
1/8 BSP
TYP
23
29
40
9.85
78.7
14.875
M4 DEEP 6
TYP x 2
8.275
"L"
19.875
31.75
Station
2
3
4
5
6
2.36
Station
L(mm)
70
93
116
139
162
X(mm)
58
81
104
127
150
SV-05-10
Technical Info
GEVA-80 Index
BACCARA
Flow
3/4", 1"
How to Order
Example : G80-S-2201V0-321
Is a GEVA 80 pilot operated valve, Brass, 1/4"BSP,
2WNC, Viton seals, without manual override,
24V AC 6W 60Hz, with connector.
(1)
Port
Brass
2
Nylon (2) 4
1/4" BSP
1/4" NPT
3/8" BSP
3/8" NPT
1/2" BSP
1/2" NPT
3/4" BSP
3/4" NPT
1" BSP
1" NPT
Body
G80-S
Function
20
21
30
31
40
41
50
51
60
61
2W NC
2W NO
1
2
Manual
Override
Seals
NBR
Viton
EPDM
Kalrez
N
V
E
K
None
2.37
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Connector
0
1
2
3
4
5
7
without
0
1
with
with bi-color 2
LED
3
with LED
and surge
protection
9
other
GEVA-80 Index
Technical Specifications
Pressure and flow table
Function:
Ports size:
Size
Orifice
(mm)
See table
1/4"
Temperature range:
Fluid: max 80 C
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Main valve :
3/8"
1/2"
12
Kv
(L/Min)
Pressure
12
0.5-10
16
35
Port
Orifice
Kv
or Nylon 66
Solenoid operator:
*less coil
3/4"
20
130
0.3-12 0.3-12
690
1"
25
200
0.5-12 0.5-12
980
Port
Electrical specifications
Orifice
Kv
Standard voltages:
Duty cycle:
100%
Variation in voltage:
*less coil
3/4"
20
130
0.3-10 0.3-10
690
1"
25
200
0.5-10 0.5-10
980
Size
1/4"-3/8"
58
86
22
32
65
1/4"-3/8"BSP/NPT
125
11
M5X0.8
22
1/2"
70
90
27
38
68
1/2" BSP/NPT
135
13.5
M5X0.8*
22*
Dimensions
* Not available in plastic
Port Size
3/4"BSP/NPT
90
96.3
32
55
3/4"
17
15
25
103
65
1"
21
16
29.5
109.50
1" BSP/NPT
49.2
C
C
D
D
E
2.38
L
A
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
The working pressure is 12 bar.
A minimum pressure of 0.5 bar is required
for operation.
To order valves manufactured to your
specific requirements, please contact our
technical sales department.
How to Order
Example : G80-S-240r1V0-321
Flow Direction
G80-S
Body
Brass
(1)
Port
1/2" BSP
1/2" NPT
3/4" BSP
3/4" NPT
Function
40r
41r
50r
51r
2W NC
2W NO
1
2
Manual
Override
Seals
NBR
Viton
EPDM
Kalrez
N
V
E
K
None
2.39
Voltage
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
No coil
AC7.5W50Hz
AC6W60Hz
DC6.5W
AC4W50Hz
AC3W60Hz
DC3W
Connector
0
1
2
3
4
5
7
without
0
with
1
with bi-color 2
LED
3
with LED
and surge
protection
9
other
GEVA-80 Index
Technical Specifications
Pressure and flow table
Function:
Ports size:
See table
Temperature range:
Fluid: max 80 C
Ambient: -10 C to 50 C
Size
Orifice
(mm)
1/2"
16
3/4"
16
Pressure
0.5 - 10
Kv
(L/Min)
60
80
Materials in contact
with fluid :
Main valve :
Brass - hot stamping, upon request
dezinced brass (Cz132)
Solenoid Operator:
Brass and Stainless steel 400 series
Seals:
NBR, Viton, EPDM, Kalrez
Electrical specifications:
Standard voltages:
6, 12, 24V DC
Duty cycle:
100%
Variation in voltage:
Dimensions
2.40
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Flow
G80-S
Port
3/4"BSPT
3/4"NPT
1"BSPT
1"NPT
1-1/2"BSP
1-1/2"NPT
2"BSP
2"NPT
Function
50
51
60
61
70
71
80
81
2WNC
2WNO
Flow
control
Seals
1
2
PVC
with(1)
without(2)
2.41
Voltage
5
6
6
12
24
110
230
Power
1
2
3
5
7
AC7.5W50Hz
AC6W 60Hz
DC 6.5W
AC4W50Hz
AC3W60Hz
DC3W
Latch
Connector
1
2
3
4
5
7
L
without
with
with bi color
LED
with LED &
surge
protection
other
0
1
2
3
9
GEVA-80 Index
Technical Specifications
Flow and Orifice table
Function:
Connection:
Size
Orifice
(mm)
Kv
(L/Min)
3/4"
27
140
1"
27
200
1-1/2"
55
520
2"
55
600
10Kg./cm2
Pressure range:
0.3 -
50C
Solenoid:
Geva 80
2WNC or 2WNO
solenoids
all voltages
Materials:
Dimensions
A
3/4"
108
110
81
1"
114
110
81
1-1/2"
180
160
126
190
170
126
Size
2.42
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Pilot pressure
Flow
How to Order
Example : G80-SE-2201N-321
Is a GEVA 80 external pilot operated valve, Brass,
1/4"BSP, 2WNC, NBR seals, 24V AC 6W 60Hz, with connector.
G80-SE
Body (1)
Port
2
3
1/4" BSP
1/4" NPT
3/8" BSP
3/8" NPT
1/2" BSP
1/2" NPT
Brass
St.st
Function
20
21
30
31
40
41
2W NC
Voltage
Seals
NBR
Viton
EPDM
N
V
E
6
12
24
110
230
2.43
1
2
3
5
7
Power
AC7.5W50Hz 1
AC6W60Hz 2
DC6.5W
3
AC4W50Hz 4
AC3W60Hz 5
DC3W
7
Connector
without
with
with bi-color
LED
with LED
and surge
protection
other
0
1
2
3
GEVA-80 Index
Technical Specifications
Pressure and flow table
Function:
2/2 Way NC
Ports size:
See table
Temperature range:
Fluid: max 80 C
Size
1/4"
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Orifice Pressure
Kv
(mm)
(bar) (L/Min)
8
3/8"
12
1/2"
12
12
1-10
25
35
Main valve :
Brass - hot stamping or St.st 316
Seals:
NBR, Viton, EPDM
Media:
Port
Size
1/4"
58
32
72.7 11.2
3/8", 1/2" 69
38
80.5
13
22
78.2 86.15
22
1/4"BSP/NPT
27.6
83.7 93.45
22
3/8",1/2"BSP/NPT
Dimensions
2.44
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Notes
Maximum pressure for use at nominal voltage + 10%.
For further information, please consult our engineers.
When switching from an AC coil to a DC coil, the
solenoid operator must be changed too.
How to Order
Example : G80-Z-2201N-231
Is a GEVA 80 Zero differential Brass 1/4" BSP,
2WNC, NBR seals, 12V DC 6.5W with connector.
G80-Z
Body
Brass
(1)
2
Port
1/8"BSP
1/8"NPT
1/4"BSP
1/4"NPT
Function
10
11
20
21
2WNC
Seals
1
NBR
EPDM
Kalrez
2.45
Voltage
N
E
K
W/out coil
6
12
24
110
230
other
Power
0
1
2
3
5
7
9
No coil
AC7.5W50Hz
AC6W 60Hz
DC 6.5W
Connector
0
1
2
3
without
with
with bi color
LED
with LED &
surge
protection
0
1
2
3
GEVA-80 Index
Technical Specifications
Function:
2/2 Way NC
Port size:
See table
Temperature range:
Fluid: max 80 C
Orifice (mm)
1/8", 1/4"
Pressure
AC
DC
0-10
0-6
Kv (L/Min)
10
Main Valve:
Brass
Solenoid operator:
Brass, Stainless steel 303
& 400 series
Seals:
NBR, EPDM, Kalrez
Media:
Coil voltage:
Dimensions
2.46
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
Working Principle
The Solenoid Operator is used to create a magnetic
force. The balance between this force and the
returning spring at any current, is used to control
the plunger stroke which determines the valve opening.
The magnetic force is direct associated to the current
passing in the coil.
The fluid enters the valve below the seat. The fluid
pressure together with the magnetic force acts against
the return spring. Setting this spring will change the
minimum current needed to open the valve, and by that,
the minimum flow.
Notes
Out
In
Flow
How to Order
Example : G80-PR-21015N0-1
Is a GEVA 80 Proportional direct operating,
Brass, 1/8" BSP 2WNC, 2.4 orifice, NBR,
without manual override, with connector.
G80-PR
Body (1)
Alum.
Brass
St.st
1
2
3
Port
M5
10 UNF
1/8"BSP
1/8"NPT
Function
00
01
10
11
2WNC
Input Control
Orifice
1
1.2
1.6
2.0
2.4
3.0
other
Manual
Override
Seals
1
2
3
4
5
6
9
NBR
Viton
EPDM
2.47
N
V
E
None
Connector
without
with
0
1
GEVA-80 Index
Technical Specifications
Function:
Ports size:
Orifice:
(2)
Kv :
Pressure range:
Temperature range:
Materials in contact
with fluids
2/2 Way NC
Maximum Working Pressure (bar)
M5 and 1/8" BSP & NPT
Orifice Size (mm)
1
1.2 1.6
2.0
See table
(3)
Pressure
rating
[bar]
10
8
6
5
See table
Vacuum - see table
Kv (l/min)
0.5
0.65 1.0
1.6
Fluid: -10C to 80C
Ambient: -10 C to 55 C
Main valve :
Aluminum, Brass,
Stainless steel
Solenoid Operator:
Stainless St. 300/400 series
Seals:
NBR, Viton or EPDM (other on request)
Guide Rings: PTFE
50 gr (aluminum base)
Neutral gases, water, oil
2
Max. Viscosity 21mm /s
In any position, preferably upright
2.4
3.0
2.5
2.0
2.8
Electrical Specification:
The Control Parameter is the current in the Coil!
Operating Current:
100-500 [mA]
Standard voltage 24 VDC(=)
Protection Class:
IP65 with connector
Coil terminal:
Per DIN 43650-b, or
2 flying leads 18AWG
300mm length.
Dimensions
2X M3 DEEP 6
2.48
PORT
M5/10 UNF
5.5
51.5
1/8
10
58.5
SV-04-09
Technical Info
GEVA-80 Index
BACCARA
NO
Notes
Contact our technical department to get
details on valve and fluid compatibility.
To order valves manufactured to your
specific requirements, please contact
our technical department.
Flow direction
How to Order
Example : G80-CS-41012V-321
Is a GEVA-80 Chem-Sol, 1/8"BSP, 2W NC,
Pressure, Viton, 24V AC 6W 60Hz with connector.
G80-CS Body
PVC
Port
Function
1/8"BSP 10 2W NC
1/8"NPT 11 2W NO
1
2
Pressure
Vacuum 1
Pressure 2
Seals
Viton
EPDM
2.49
Voltage
V
E
W/out coil
6
12
24
110
230
other
0
1
2
3
5
7
9
Power
0
No coil
AC7.5W 50Hz 1
AC6W 60Hz 2
3
DC6.5W
AC4W 50Hz 4
AC3W 60Hz 5
7
DC 3W
Connector
without
with
with bi color
LED
0
1
2
3
with LED &
surge protection
9
other
GEVA-80 Index
Technical Specifications
Functions:
2/2 Way NC or NO
Ports size:
Orifice:
4mm
Kv:
4 L/min
Pressure range:
Temperature range:
Materials in contact
with fluid:
Main valve :
PVC
Diaphragm:
Viton, EPDM
Protection class IP65 with plug attached
Dimensions
14
1/8 BSP
TYPx2
26.2
59.8
2.50
7.5 TYPx2
57
22
14
SV-4-09
Main Contents
BACCARA
Section Three
GEVA 65
G65-B
Coil
3.1 - 3.2
G65-O
Operator
3.3 - 3.4
G65-A
3.5 - 3.6
G65-A
3.7 - 3.8
G65-M
3.9 - 3.10
G65-PR
3.11-3.12
Technical Info
GEVA-65 Index
BACCARA
GEVA 65 COIL
General Description
G65 coils are designed to withstand industrial
ambient conditions. The coils are constructed
according to EN 60204.1 and used on G65
operators.
The coil includes part of the magnetic circuit
and moulded with high temperatures, with
resistance thermoplastic to withstand heavyduty requirements.
Notes
The coil should not be energized without
being assembled on operator.
The coils are designed to operate at 10% of
rated voltage.
The coils are suitable to operate at 100% duty
cycle, however when using high power coils for
a long time, the temperature developed may affect
solenoid seals. Viton seals or lower power coils
are advised.
For outdoor applications or when the coil is
exposed to high humidity, please contact our
technical department.
How to Order
G65-B
Voltage
Power
Connector
Example : G65-B-331
Is a G65 Coil 24V DC 2.9W
with connector.
12
24
110
230
3.1
2
3
5
7
AC3.8VA 50Hz
DC 2.9W
1
3
without
with
0
1
GEVA-65 Index
Technical Specifications
Electrical specifications
Standard voltages:
Variation in voltage:
Duty cycle:
100%
Coil temperature:
-20 C to 70 C ambient
Isolation class:
F 155
Protection grade:
Coil terminal:
Connector:
Assembly:
On a valve, 4 positions at 90
Fixing:
Weight:
Approx 51 gr.
Power Ratings
50 Hz
DC
3.8
2.9
Dimensions
6
M2.5
18.5
27
2x2
3x0.8
7.4
3.4
22.5
25.5
16.5
8.5
10.5
11
36.5
3.2
SV-04-10
Technical Info
GEVA-65 Index
BACCARA
GEVA 65 OPERATOR
General Description
The operator is designed to be assembled on a valve
or a counterpart to set up a solenoid valve.
According to the operator and valve construction,
various functions are available.
The G65 operators may be used with alternate or
direct current.
Notes
Operator cavity should be designed according
to our specifications, see drawing on the
next page.
Operator for DC is without shading ring and may
not be used for AC.
When assembling coil take care not to tighten
nut excessively.
Valves are inspected at general pressure of
up to 10 bar. Higher pressures are available,
please consult our technical sales department.
For applications where abnormal conditions exist
and for fluids other than air, water or inert gases,
please consult our technical sales department.
To order valves manufactured to your specific
requirements, please consult our technical sales
department.
2W
3W
How to Order
Example : G65-O-2103-N-331
Is a G65 operator, Brass tube, 2WNC, DC, 1.2 orifice,
NBR seals, 24V DC 2.9W with connector.
Example : G65-O-3303-N-331
Is a G65 operator, St.st tube, 3WNC, DC, 1.2 orifice,
NBR seals, 24V DC 2.9W with connector.
2W
G65-O
Tube
Brass
St.st
Function
2
3
2WNC
Current
DC
AC
0
1
Orifice
0.8
1
1.2
1
2
3
3W
G65-O
Tube
Brass
St.st
Function
2
3
3WNC
Current
DC
AC
0
1
Orifice
0.8
1
1.2
Voltage
Seals
1
2
3
3.3
NBR
Viton
EPDM
N
V
E
W/out coil
12
24
110
230
0
2
3
5
7
Connector
Power
AC3.8VA50Hz
DC 2.9W
1
3
without
with
0
1
GEVA-65 Index
Technical Specifications
Function:
Threads on
Orifice size:
0.8, 1, 1.2mm
operator tube:
M6x0.75
Pressure range(bars):
Standard up to 10
Operator assembly:
Temperature range:
Fluid: max 80 C
Ambient: -10 C to 50 C
Response time:
5 - 12 msec
Cycling rate:
Materials in contact
with fluid :
Coil data:
Standard voltage:
See "coil"
Operator :
Brass or Stainless steel
series AISI 300 & 400
Shading ring:
Copper
Orifice:
Stainless steel
Weight:
15 gr (without coil)
Media:
Dimensions
1.7+0.05
Operator seating
3.4
SV-04-09
Technical Info
GEVA-65 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
The valves are AC or DC designated.
The coil can be mounted in 4 positions, at 90 apart.
The coil plug can rotate 2 positions at 180 .
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
IN
OUT
How to Order
Example : G65-A-10012V0-010
Is a Geva 65 Direct operated valve, Aluminium base,
M5, 2W NC, orifice 1mm with Viton seals, without manual
override, without coil, AC 3.8VA 50Hz without connector.
G65-A
Body (1)
Alum.
Brass
St.st
1
2
3
Port
M5
10UNF
Function
00
01
2WNC
Orifice
0.8
1
1.2
1.6
2.0
Manual
override
Seals
1
2
3
4
5
NBR
VITON
EPDM
3.5
N
V
E
None
Voltage
w/out coil
12
24
110
230
Power
0 AC3.8VA50Hz 1
3
2 DC 2.9W
3
5
7
Connector
without
with
other
0
1
9
GEVA-65 Index
Technical Specifications
Function:
2/2 Way NC
Port size:
M5
Media:
0.8
Orifice (mm)
1.0
1.2 1.6
AC - 3.8VA
30
25
20
12
DC - 2.9W
30
25
20
0.4
0.5
0.65
1.2
1.6
Temperature range:
Tube:
Brass, AISI 303
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM
Base:
Al-6061, Brass, AISI 303
Responded time:
5 - 12(msec)
Weight:
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
M3 DEEP 6
TYP x 2
15
3.6
SV-04-09
Technical Info
GEVA-65 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
Valves for pressure higher than 12 bar are less
manual override.
The valves are AC or DC designated.
The coil can be mounted in 4 positions, at 90 apart.
The coil plug can rotate 2 positions at 180 .
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G65-A-10032V0-010
Is a Geva 65 Direct operated valve, Aluminium base,
M5, 3W NC, orifice 1mm with Viton seals, without manual
override, without coil, AC 3.8VA 50Hz without connector.
G65-A
Body
Alum.
Brass
St.st
Port
1
2
3
M5
10UNF
Function
00
01
3WNC
Orifice
0.8
1
1.2
Seals
1
2
3
NBR
Viton
EPDM
3.7
N
V
E
Manual
override
None
Voltage
w/out coil
12
24
110
230
0
2
3
5
7
Power
AC3.8VA50Hz 1
DC 2.9W
3
Connector
without
with
other
0
1
9
GEVA-65 Index
Technical Specifications
Max. Pressure (Bar) 3W NC Table
Function:
3/2 Way NC
Port size:
M5
Media:
Coil
Current/Power
Orifice (mm)
0.8
1.0
1.2
AC - 3.8VA
10
8.5
5.5
DC - 2.9W
10
8.5
5.5
0.4
0.5
0.65
Temperature range:
Tube:
Brass
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM
Base:
Al-6061 or Brass
Responded time:
5 - 12(msec)
Weight:
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
M3 DEEP 6
TYP x 2
3.8
SV-04-09
Technical Info
GEVA-65 Index
BACCARA
Notes
Valves are 100% inspected at 10 bar. Valves for
higher pressure are available upon special request.
See table for maximum pressures.
The valves are AC or DC designated.
The coil can be mounted in 2 positions, at 180 apart.
The coil plug can rotate 2 positions at 180 .
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G65-M-0810133N-311
Is a Geva 65 8 station manifold, Aluminium body,
10UNF, 3W NC, orifice 1.2mm with NBR seals,
24V AC 3.8VA 50Hz with connector.
G65-M
#
Stations
Specify
00 - 12
Body
Alum.
Port
1
M5
10UNF
Function
00
01
2WNC
3WNC
1
3
Orifice
0.8
1
1.2
3.9
Voltage
Seals
1
2
3
NBR
Viton
EPDM
N
V
E
w/out coil
12
24
110
230
0
2
3
5
7
Power
Connector
AC3.8VA50Hz 1 without
3 with
DC 2.9W
other
0
1
9
GEVA-65 Index
Technical Specifications
Max. Pressure (Bar) 2W, 3W NC Table
Function:
Port size:
M5 or 10UNF
Coil
Current/Power
Orifice (mm)
0.8 1.0
1.2
AC - 3.8VA
10
8.5
5.5
DC - 2.9W
10
8.5
5.5
0.4
0.5
0.65
than 3 E
Temperature range:
Tube :
Brass
Plunger & upper pole:
430 FR
Seals:
NBR, Viton, EPDM
Base:
Al-6061
Responded time:
5 - 12msec
Electrical specifications
Standard voltages:
Duty cycle:
100%
Variation in voltage:
Dimensions
Station
2
3
4
5
6
7
8
9
10
11
12
3.10
Station
L(mm)
42
59
76
93
110
127
144
161
178
195
212
X(mm)
49
66
83
100
117
134
151
168
185
202
219
SV-04-09
Technical Info
GEVA-65 Index
BACCARA
Working Principle
The solenoid operator is used to create a magnetic
force. The balance between this force and the
returning spring at any current, is used to control
the plunger stroke which determines the valve opening.
The magnetic force is direct associated to the current
passing in the coil.
The fluid enters the valve below the seat. The fluid
pressure together with the magnetic force acts against
the return spring. Setting this spring will change the
minimum current needed to open the valve, and by that,
the minimum flow.
Notes
Out
In
Flow
How to Order
Example : G65-PR-2s1014N0-1
Is a GEVA 65 Proportional direct operating,
brass with Stainless steel tube, 1/8" BSP 2WNC,
1.6 orifice, NBR, without manual override, with connector.
G65-PR
Body (1)
Alum.
Brass
St.st
1
2
3
Port
M5
10 UNF
1/8"BSP
1/8"NPT
Function
00
01
10
11
2WNC
Orifice
0.8
1
1.2
1.6
Input Control
Manual
Override
Seals
1
2
3
4
NBR
Viton
EPDM
3.11
N
V
E
None
Connector
without
with
0
1
GEVA-65 Index
Technical Specifications
Function:
Ports size:
Orifice:
Kv(2):
Pressure range:
Temperature range:
2/2 Way NC
Maximum Working Pressure (bar)
M5 and 1/8" BSP & NPT
Orifice Size (mm)
0.8
1
1.2
1.6
See table
(3)
Pressure
rating
[bar]
10
8
6
4
See table
Vacuum - see table
Kv (l/min)
0.4
0.5 0.65 1.2
Fluid: -10 C to 80 C
Ambient: -10 C to 55 C
(1) From technical vacuum to max.rating
Materials in contact
Main valve :
with fluids
Aluminum, Brass,
Flow regulation :
Stainless steel
With Control unit P.W.M 500[Hz], measured at
Solenoid Operator:
constant
P (delta P).
Stainless St. 300/400 series
Hysteresis
<5% of F.S.
Seals:
Repeatability
<3% of F.S.
NBR, Viton or EPDM (other on request)
Sensitivity
<2% of F.S.
Guide Rings: PTFE
Weight (with coil):
50 gr (aluminum base)
Media:
Neutral gases, water, oil
2
Guidelines for selection GEM-PR valve
Max. Viscosity 21mm /s
1. The pressure drop ( P) on the valve should be
Mounting:
In any position, preferably upright
30-50% or higher, of the total pressure drop in the
system.
2. Special consideration should be taken in choosing
Electrical Specification:
the right Kv of the valve as this factor determines
The Control Parameter is the current in the Coil!
the flow and pressure drop of the valve.
Operating Current:
max 150 [mA]
3. To achieve better regulation performance when
Standard voltage 24 VDC(=)
working without a control unit, the maximum
Protection Class:
IP65 with connector
pressure should be 1.2 times the working pressure.
Coil terminal:
Per DIN 43650-b, or
The maximum pressure can be adjusted using
2 flying leads 18AWG
the upper screw.
300mm length.
4. Inlet pressure should be kept constant during
operation.
12
M3x0.5
DEEP 5
TYPx2
15
22.1
50.6
63
52.9
15
Dimensions
M5x0.8
DEEP 7
TYPx2
16
3.12
SV-03-11
Main Contents
Technical Info
GEVA-60 Index
BACCARA
Up
Assembly notes
Valve assembly : valve must be assembled in upright
position only, with coil facing upwards and valve below.
Cable exiting from the coil must always face downwards.
Tube assembly : only as marked on valve body.
Filtering : the fluid must be filtered at level of 120 mesh
at least.
How to Order
Example : G60-41031
Is a Geva 60 1/8" Latch solenoid valve,
plastic, 1/8"BSP 24V DC with 2 wires
G60
Base
Brass
Plastic
Port
2
4
1/8" BSP
1/8" NPT
Electric
Connector
Voltage
10
11
12V DC
24V DC
2
3
4.1
2 wires
3 wires
1
2
GEVA-60 Index
Technical Specifications
GEVA 60 Electrical wiring 3 wires
18V+50%
30V +50%
Dimensions
C(F) V2(V)
4.2
2&3 wires
18
2&3 wires
30
SV-10-09
Technical Info
GEVA-60 Index
BACCARA
How to Order
Example : G60-M-521021
Is a 5 station Geva 60 manifold with brass base,
1/8"BSP, 12V DC solenoids with 2 wires electric connection.
G60-M
#
stations
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
Base
Brass
Plastic
Port
2
4
1/8" BSP
1/8" NPT
Electric
Connector
Voltage
10
11
4.3
12V DC
24V DC
2
3
2 wires
3 wires
1
2
GEVA-60 Index
Technical Specifications
# stations
210
280
350
420
490
560
630
700
10
770
11
840
12
910
Dimensions
4.4
SV-10-09
Main Contents
BACCARA
Section Five
GEVA 75
G75-O
5.1 - 5.2
G75-O
5.3 - 5.4
G75-A
5.5 - 5.6
GALIT
5.7 - 5.8
G75-H
5.9 - 5.10
G75-S
5.11 - 5.12
G75-S
5.13 - 5.14
G75-S
5.15 - 5.16
G75-M
Manifold Installation
5.17 - 5.18
G75-C
Irrigation Controllers
5.19 - 5.20
G75-C
5.21 - 5.22
G75-C
5.23 - 5.24
G75-S
5.25
G-75-S
5.26
G75-S
5.27
G75-S
Inline Hydraulic Valve 1-1/2", 2" Level float valve with shut off solenoid
5.28
G75-S
5.29
G75-S
5.30
G75-S
5.31
G75-SM
5.32
5.33
G75-PR
5.34
G75-PR
5.35 - 5.36
G75-Z
5.37 - 5.38
G75-DP
5.39 - 5.40
G75-LDO
5.41 - 5.42
Technical Info
GEVA-75 Index
BACCARA
Notes
Coils for other voltages are available, please
contact our technical sales department.
Available with brass adaptor upon request.
How to Order
Example : G75-O-2W1-1
Is a Geva 75 Operator, 2WNC, 24V AC.
Example : G75-O-1032-1
Is a Geva 75 Operator, 1/8 BSP, 3WNC,
1.2 orifice, 24V AC.
2WNC
2W
G75-O
2W
Function
2WNC
Voltage
24V AC
12V AC
12V DC
24V DC
110V AC (1)
3W
G75-O
Port
1/8"BSP
1/8"NPT
Function
10
11
3WNC
3WNO
3
4
Orifice
1
1.2
1.6
1
2
3
5.1
1
3
4
5
7
3WNC/3WNO
GEVA-75 Index
Technical Specifications
Voltage:
Solenoid
2W 50 Hz
Current:
2W 60 Hz
3W 50 or 60 Hz
DC
Working Pressure 2W NC
Holding[A]
0.19
Orifice
0.14
0.125
up to 2.0
Pressure (bar)
12
4.5W
Electric connection:
Protection:
IP66
Ambient Temp:
Max 60 C
Fluid Temp:
Max 80 C
Working Pressure 3W NC
Orifice
Materials
Housing:
Reinforced Nylon 66
Passivated AISI430F
Rubber Seal:
EPDM
Encapsulate:
Polyurethane
1.0
1.2
1.6
AC Pressure (bar) 16
11
DC Pressure (bar) 12
Working Pressure 3W NO
Orifice
1.0
1.2
1.6
Pressure (bar)
16
12
2+0.2
10
5.5
6.5
12
Max2.0
Operation seating
Dimensions
1/2" NPT
30
CABLE LENGTH
350 (mm)
BLACK WIRE
1/8" BSP/NPT
30
47
1.2
SOLENOID ON
1.2
54
9
SOLENOID ON
CABLE LENGTH
350 (mm)
BLACK/RED
58
1.2
SOLENOID ON
3/4"-UNEF-20TPI
3/4"-20 UNEF-2B
PLUNGER STROKE 1+- 0.1
24
3/4"-20 UNEF-2B
PLUNGER STROKE 1+- 0.1
3WNC/3WNO
33.5
29.8
2WNC
CABLE LENGTH
350 (mm)
BLACK WIRE
5.2
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Notes
Two wires: to pull the plunger up, connect the black
wire (-) and the green to the (+).
Three wires: to pull the plunger up, pulse is given to
the red wire (-). To release the plunger, a pulse is
given to the black wire (-).
To avoid damage to the electronic circuit, operate
the three wires solenoid only by a controller.
Available with brass adaptor upon request.
Coils for other voltages are available, please
contact our technical sales department.
2WNC
3WNC/3WNO
2W
G75-O
2W
Voltage
VDC
Function
2WNC
B
C
D
6
3W
G75-O
Port
1/8"BSP
1/8"NPT
Function
10
11
3WNC
3WNO
Orifice
3
4
1
1.2
1.6
Wires
1
2
3
5.3
two
three
null
a
GEVA-75 Index
Technical Specifications
Working Pressure 2W NC
Orifice
up to 2.0
Pressure (bar)
12
Working Pressure 3W NC
Orifice
1.0
1.2
1.6
Pressure (bar)
16
11
Working Pressure 3W NO
Orifice
1.0
1.2
1.6
Pressure (bar) 16
12
2+0.2
10
5.5
6.5
12
Max2.0
Operation seating
C[F]
Please consult
Dimensions
30
1/8" BSP/NPT
1.2
47
SOLENOID ON
58
CABLE LENGTH
350 (mm)
BLACK/GREEN
3/4"-20 UNEF-2B
PLUNGER STROKE 1 0.1
3WNC/3WNO
2WNC
5.4
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
Applications
They are specially designed for irrigation
control sytems.
Notes
Available with brass adaptor upon request.
For other availabe voltages and to order
valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : G75-A-110302-1
Is a GEVA 75 with flange, 1/8" BSP
3WNC, no manual override,
1.2 orifice, 24V AC coil.
G75-A
Type
with flange
1
without flange 2
Brass
3
(2)
Port
1/8" BSP
1/4" BSP (2)
1/8" NPT
1/4" NPT (2)
Manual (1)
Override
Function
10
20
11
21
2WNC
3WNC
3WNO
1
3
4
5.5
None
Plastic
0
1
(1)
Voltage
Orifice
1
1.2
1.6
1
2
3
Wires
1
3
4
5
6
7
B
C
D
two
three
null
a(3)
GEVA-75 Index
Technical Specifications
Max. Pressure
Ports size:
Materials:
Function
Orifice
AC
DC
DC latch
2WNC
up to 2.0
12
12
12
16
12
16
1.2
11
11
Reinforced Nylon
Seals:
Pressure bar
3WNC
EPDM
1.6
16
16
16
1.2
12
12
12
Pressure:
See table
1.6
Mounting:
Voltage:
Solenoid:
3WNO
12, 24 DC
9-12, 24 V Latch
Protection class IP66
Dimensions
59
65
1/8
70
77
22
3W
15
2WNC
M6 THRU
TYPx2
37
15
25
15
M5 x0.8 DEEP 8
TYPx2
7.3
20
22
CABLE LENGTH
350 (mm)
30
30
A
Manual
Override
1/8" BSP/NPT
BOTH ENDS
25
1/8" BSP/NPT
BOTH ENDS
1/8" or 1/4"
BSP/NPT
TYPx2
32
48.3
Brass
35.8
Plastic
5.6
SV-11-10
Technical Info
GEVA-75 Index
BACCARA
Notes
Minimum pilot pressure of 1 bar is required.
Mounting Bracket
GALIT
Mounting
Bracket
Voltage
Port
Wires
1/8"BSP
10
without
two
1/8"NPT
11
with
three
4
5
6
B
C
D
5.7
null
a(1)
GEVA-75 Index
Technical Specifications
Functions:
3/2 Way NC or NO
Ports size:
Orifice:
5mm
Pressure range:
1 - 10 bar
Temperature range:
Ambient : -10 - 50 C
Fluid : 5 - 50
Materials:
Main Valve:
Reinforced Nylon
Seals:
NBR
Solenoid:
See solenoid specifications
Media:
Water
Coil Voltage:
Dimensions
IN
1/8" BSP / NPT
151
AUTO
EX N.O
OPEN
CLOSE
OUT
IN N.C
33
56
IN N.O
EX N.C
5.8
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
Notes
Made of advanced technology plastics,
synthetic elastomers, Stainless steel and
plastics resistant to corrosion.
They work in a wide range of pressures.
Manual override in all the valves with
internal draining.
Progressive opening and shut off that
prevents water hammer.
Very low head loss with high flows.
Easy maintenance. Total access to the
internal parts from the cover of the valve.
Wide range of possibilities such as electric
valves, pressure regulating etc.
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-50151
Is a GEVA 75 3/4" BSPT inline electric
hydraulic valve, 2WNC, with flow control,
24V AC.
G75-S
Port
3/4" BSP
3/4" NPT
1" BSPT
1" NPT
1" slip in
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
Manual
Override
Function
50
51
60
61
62
70
71
80
81
2WNC
None
Plastic
Handle
Flow control
0
1
2
5.11
with(1)
without(2)
5
6
Voltage
24VAC
12VAC
12VDC
24VDC
24Latch(23)
110VAC (4)
6 Latch (4)
12 Latch (9)
16 Latch (12)
Wires (3)
1
3
4
5
6
7
B
C
D
two
three
null
a
GEVA-75 Index
Technical Specifications
Size:
Connection:
1"
Solenoid:
H
(kg/cm2)
3/4
"
Q (m3/h)
H
(kg/cm2)
Dimensions
Size
2"
1-1
/2"
RECOMMENDED
WORKING ZONE
Weight
3/4"
81
230g
1"
81
230g
1-1/2"
740g
2"
790g
Q (m3/h)
112
81
127
5.12
SV-04-09
GEVA-75 Index
BACCARA
Notes
Made of advanced technology plastics,
synthetic elastomers, Stainless steel and
plastics resistant to corrosion.
They work in a wide range of pressures.
Progressive opening and shut off that
prevents water hammer.
Very low head loss with high flows.
Easy maintenance. Total access to the
internal parts from the cover of the valve.
Wide range of possibilities such as electric
valves, pressure regulating etc.
A "drill" body can be ordered upon special
request.
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-5015
Is a GEVA 75 3/4" BSPT inline hydraulic
valve, 2WNC, with flow control.
G75-S
Port
3/4" BSP
3/4" NPT
1" BSPT
1" NPT
1" slip in
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
Function
50
51
60
61
62
70
71
80
81
2WNO
Flow control
with
without (1)
5
6
5.13
Technical Info
GEVA-75 Index
Technical Specifications
Size:
Connection:
1"
Materials:
3/4
"
H
(kg/cm2)
Max.Fluid Temp: 50
Reinforced Nylon
Diaphragm:
PVC
Seals:
Buna - N
Screws:
H
(kg/cm2)
Dimensions
Size
RECOMMENDED
WORKING ZONE
Weight
3/4"
105 110
77
81
230g
1"
112 110
84
81
230g
92 1/4" NPT/BSP
740g
190 170
94 1/4" NPT/BSP
790g
1-1/2"
2"
2"
1-1
/2"
AISI 304
98
127
Q (m3/h)
1/8" BSP
Thread
84
(G)
E
127
81
Thread
(G)
A
5.14
Thread
(G)
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
Notes
The working pressure is 12 bar.
A minimum pressure of 0.5 bar
is required for operation.
To order valves manufactured to your
specific requirements, please contact
our technical sales department.
How to Order
Example : G75-S-4401N-1
Is a GEVA 75 Pilot operated 1/2" BSP,
2WNC, NBR seals, 24V AC.
G75-S
Body
Nylon
Port
4
3/8"BSP
3/8"NPT
1/2"BSP
1/2"NPT
Function
30
31
40
41
2WNC
Seals
1
5.15
NBR
EPDM
Wires(1)
Voltage
N
E
1
2
3
4
5
6
7
B
C
D
two
three
null
a
GEVA-75 Index
Technical Specifications
Functions:
2/2 Way NC
Ports size:
Orifice:
12mm
Temperature range:
Fluid : max 80 C
Ambient : -10 C to 50 C
Solenoid:
Geva 75
2WNC solenoids, all voltages
Materials:
Dimensions
5.16
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Pilot Operated
G75
How to Order
Example : G75-M-541031
Is a 5 station Geva 75 manifold 3W NO,1/8"BSP,
direct operating 1.6 orifice, 24V AC solenoids.
GEM-SOL
G75-M
#
stations
Type
G75
1
GEM-SOL 2
Pilot Op.
3
3
4
5
6
7
8
9
10
11
12
3
4
5
6
7
8
9
10
11
12
Function
without
sol
2WNC
3WNC
3WNO
Pilot (1)
operated NC
Pilot (1)
operated NO
Orifice (2)
Port
0
1/8"BSP
1/8"NPT
1
3
4
5
6
5.17
10
11
1
1.2
1.6
Pilot operated(1)
Wires (3)
Voltage
1
2
3
5
1
3
4
5
6
7
B
C
D
two
three
null
a
GEVA-75 Index
Technical Specifications
Direct Operated
Hose Nipple
Tube
Hose Nipple
Tube
Pilot Operated
#
stations
10
11
12
261
348
435
522
609
696
783
870
957
1044
130.5
174
217.7
261
304.5
348
391.5
435
478.5
522
5.18
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Notes
Dust and water tight.
Various mounting options, on valve and wall.
High quality alkaline battery included.
Three automatic irrigation controllers, plus
manual operation.
Please consult our technical sales department
for further information on compatibility with
various coils.
Options:
Solar Panel
2) Example : G75-C-4-60-50-70-80-00
Is a Geva 75 Four Valves controller :
Master Valve : 1" BSP, Valve 1 : 3/4" BSP, Valve 2 : 1-1/2" BSP,
Valve 3 : 2" BSP, Valve 4 : No Valve
3) Example : G75-C-2-60-G75-A-110102
Is a Geva 75 Two Valves controller :
Valve 1 : 1" BSP
Valve 2 : G-75-A with flange, 1/8"BSP, 2WNC, No manual override, 1.2 orifice
G75-C
Type of
Controller
One Valve
Two Valves
Four Valves
1
2
4
Valve
Valve
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
00
40
41
50
60
61
70
71
80
81
G75-A *
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
Valve
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
00
40
41
50
60
61
70
71
80
81
G75-A *
Valve
00
40
41
50
60
61
70
71
80
81
G75-A *
G75-A *
* G75-A
Type
with flange
1
without flange 2
Brass
3
Port
1/8" BSP
1/4" BSP (1)
1/8" NPT
1/4" NPT (1)
Manual
Override
-
Function
10
20
11
21
2WNC
3WNC
3WNO
1
3
4
Orifice
1
1.2
1.6
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
1
2
3
5.19
Valve
00
40
41
50
60
61
70
71
80
81
No valve
1/2"BSP
1/2"NPT
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
G75-A *
00
40
41
50
60
61
70
71
80
81
GEVA-75 Index
Technical Specifications
Mechanical
Electrical
Software
Mounting Options
Option
Wall Mounting
One Valve
Vertical Mounting
Horizontal Mounting
Two Valves
Four Valves
Up to three starts
per day
Up to three starts
per day
Once daily, on
selected days
Starts select
Starts select
Day select
Day select
Season adjustment
10% - 200%
Season adjustment
10% - 200%
Off
Off
Solar Panel
Off
5.20
SV-10-09
Technical Info
GEVA-75 Index
BACCARA
Notes
Dust and water tight.
Various mounting options, on valve and wall.
High quality alkaline battery included.
Three automatic irrigation controllers, plus
manual operation.
Please consult our technical sales department
for further information on compatibility with
various coils.
Options:
Solar Panel
G75 Window+
G75-C-1W
Valve
No valve
3/4"BSP
1"BSP
1" NPT
1-1/2" BSP
1-1/2" NPT
2" BSP
2" NPT
00
50
60
61
70
71
80
81
G75-C-1W+
G75-A *
* G75-A
Type
Port
10
with flange
1 1/8" BSP
(1) 20
without flange 2 1/4" BSP
11
Brass
3 1/8" NPT
1/4" NPT (1) 21
Valve
Manual
Override
Function
2WNC
3WNC
3WNO
1
3
4
Orifice
1
1.2
1.6
1
2
3
5.21
GEVA-75 Index
Technical Specifications
Mechanical
Electrical
Software
Mounting Options
Option
Wall Mounting
Vertical Mounting
Horizontal Mounting
Solar Panel
Window +
Window
Set start and end
hours
Set On time (1
second to 12 hours)
Set On time (1
second to 12 hours)
Day select
Day select
Off
Off
High-powered
5.22
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Notes
For indoor or outdoor use.
High quality alkaline battery included.
Large graphics LCD provides easy reading.
Menu driven interactive software.
Built-in multi-lingual menu: English, Spanish, Italian,
French, Portuguese and Hebrew.
Weekly or daily scheduled programming.
Two factory preset programs included.
Master valve output, manual irrigation, system
test procedure and rain sensor input included.
How to Order
Example : G75-C-81
Is a Geva 75 8 zones DC irrigation controller.
G75-C
Type
8 zones
Voltage
8
9V DC
24V AC*
1
2
* AC controller
5.23
GEVA-75 Index
Technical Specifications
Mechanical specifications
Software features
Scheduling timer options:
Program A: 7 day weekly day schedule
Program B: Days, interval scheduling
Program C: Factory preset 7 day weekly
schedule
Program D: Factory preset days, interval
scheduling.
Unit off.
Manual operation.
System analysis:
Sequential operation of the valves.
Up to four starts per valve per day. Valves
will then open in sequence.
Irrigation duration in minutes and hours
(1 min -12 hrs with 10 min default).
Season adjustment for irrigation duration
10% - 200% in 10% increments.
Rain sensor ON/OFF option.
Real time weekly clock (D:HH:MM).
User menu language selection.
Dimensions
5.24
SV-04-09
GEVA-75 Index
BACCARA
Notes
Supplied with solenoid but without accessories.
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-704H51
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNC with flow control, with 3WNO solenoid,
24V AC
G75-S
Port
3/4"BSP
3/4"NPT
1"BSP
1"NPT
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
50
51
60
61
70
71
80
81
3WNO
4H
Flow control
with
SV-04-09
5.25
Wires(1)
Voltage
1
3
4
5
6
7
B
C
D
two
three
null
a(2)
GEVA-75 Index
BACCARA
Notes
Pilot pressure should be higher than line pressure.
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
Low pressure
For contaminated water
How to Order
Example : G75-S-70451
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNC with flow control, with 3WNO, 24V AC solenoid.
G75-S
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
3WNC
Flow control
4
with
Wires(1)
Voltage
1
3
4
5
6
B
C
D
two
three
null
a (2)
5.26
SV-04-09
GEVA-75 Index
BACCARA
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-70150
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNC with flow control.
G75-L
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
SV-04-09
Function
70
71
80
81
2WNC
Flow control
1
with
5.27
Voltage
No coil
hydraulic
GEVA-75 Index
BACCARA
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-70150
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNC with flow control.
G75-L
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
2WNC
Flow control
1
with
Wires(1)
Voltage
1
3
4
5
6
B
C
D
two
three
null
a (2)
5.28
SV-04-09
GEVA-75 Index
BACCARA
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-70150
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNC with flow control.
G75-S
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
2WNC
Flow control
1
with
SV-04-09
5.29
Wires (1)
Voltage
1
3
4
5
6
B
C
D
two
three
null
a(2)
GEVA-75 Index
BACCARA
Notes
The valve is identical to 2W NC valve,
2W NO function is a result of the solenoid.
Solenoid and accessories for demonstration only
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-S-70250
Is a GEVA 75 1-1/2"BSP inline hydraulic valve,
2WNO with flow control.
G75-S
Port
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
70
71
80
81
2WNO
Flow control
2
with
Wires(1)
Voltage
1
3
4
5
6
B
C
D
two
three
null
a (2)
5.30
SV-04-09
GEVA-75 Index
BACCARA
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-SM-70150
Is a GEVA 75 1-1/2"BSP inline hydraulic
valve 2WNC with flow control and a
manual selector.
G75-SM
Port
3/4"BSPT
3/4"NPT
1"BSPT
1"NPT
1-1/2"BSPT
1-1/2"NPT
2" BSPT
2" NPT
SV-04-09
Function
50
51
60
61
70
71
80
81
2WNC
Flow control
1
with
Voltage
No coil
hydraulic
5.31
GEVA-75 Index
BACCARA
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-SM-70150
Is a GEVA 75 1-1/2"BSP inline hydraulic
valve 2WNC with flow control and a
manual selector.
G75-SM
Port
1-1/2"BSPT
1-1/2"NPT
2" BSPT
2" NPT
Function
70
71
80
81
2WNC
Flow control
1
with
Voltage
No coil
hydraulic
5.32
SV-04-09
GEVA-75 Index
BACCARA
Applications
Electric remote control
Farm and gardening irrigation
Advanced computerized irrigation
Level control
Filtration systems
Fertilization systems
Environmental control
How to Order
Example : G75-SR-701503
Is a GEVA 75 1-1/2"BSP inline hydraulic
valve 2WNC with flow control set to 3-6 bar.
G75-SR
Port
3/4" BSPT
3/4" NPT
1" BSPT
1" NPT
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
SV-04-09
Function
50
51
60
61
70
71
80
81
2WNC
Flow control
1
with
without
5
6
Set pressure
(bar)
Voltage
No coil
hydraulic
5.33
1-3
2-5
3-6
4-7
1
2
3
4
GEVA-75 Index
BACCARA
Notes
Supplied assembled with a solenoid and accessories.
A finger filter has been installed at the pilot pressure
supply. Clean when necessary.
The XR100 has a three positions manual override:
AUTO: for automatic operation (valve is open when
solenoid is energized)
MANUAL: valve is kept open
CLOSE: valve is kept closed.
Pilot pressure must be equal or higher to line
pressure.
How to Order
Port
G75-PR
Function
Flow control
Voltage
Example : G75-PR-70151
Is a GEVA 75 1-1/2"BSP electric
pressure reducing valve 2WNC with
flow control, with a 24 VAC solenoid.
1-1/2"BSPT
1-1/2"NPT
2" BSPT
2" NPT
5.34
70
71
80
81
2WNC
with
without
24V AC
9-12VDC Latch
12V AC
12V DC
24V DC
0
1
2
3
4
5
SV-04-09
GEVA-75 Index
BACCARA
Notes
Supplied assembled with a solenoid and accessories.
A finger filter has been installed at the pilot pressure
supply. Clean when necessary.
The XR100 has a three positions manual override:
AUTO: for automatic operation (valve is open when
solenoid is energized)
MANUAL: valve is kept open
CLOSE: valve is kept closed.
A minimum pressure differential of 1 bar is required.
How to Order
Port
G75-PR
Function
Flow control
Voltage
Example : G75-PR-60161
Is a GEVA 75 1" BSP electric
pressure reducing valve 2WNC without
flow control, with a 24 VAC solenoid.
SV-04-09
1"BSPT
1"NPT
5.35
60
61
2WNC
without
without
24V AC
9-12VDC Latch
12V AC
12V DC
24V DC
0
1
2
3
4
5
5.36
GEVA-75 Index
BACCARA
Notes
Made from synthetic elastomers, Stainless steel
and plastics resistant to corrosion.
They work in a wide range of pressures.
Manual override in all the valves with internal
draining.
Minimum pilot pressure 1.5 bar above line
pressure.
Very low head loss with high flows.
Easy maintenance. Total access to the internal
parts from the cover of the valve.
Applications
Electric remote control
Drain systems
Close systems
How to Order
Example : G75-Z-60151
Is a GEVA 75 1" BSP inline electric valve, 2WNC
with flow control, 24V AC for zero differential pressure.
Function
Port
G75-Z
3/4"BSPT
3/4"NPT
1" BSPT
1" NPT
1-1/2" BSPT
1-1/2" NPT
2" BSPT
2" NPT
50
51
60
61
70
71
80
81
2WNC
Flow control
with
without (1)
5
6
5.37
Technical Info
GEVA-75 Index
Technical Specifications
Size:
Connection:
Female BSPT
or NPT thread
Line: 0-6 bar
50C
Materials:
H
(kg/cm2)
2"
1-1
/2"
1"
3/4
"
Pressure range:
RECOMMENDED
WORKING ZONE
Reinforced Nylon
Spring :
AISI 302
Q (m3/h)
Diaphragm:
PVC
Seals:
Buna - N
Screws:
Dimensions
AISI 304
Size
Weight
3/4"
117 110
81
230g
1"
124 110
81
230g
1-1/2"
2"
5.38
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Note
See instruction manual for further information
H pressure must be higher than L pressure.
Maximum H pressure 200 psi/14 bar.
This unit can be used as a manometer up to
99 psi or 7 bar.
Please consult our technical sales department
for special applications.
How to Order
Example: G75-DP-1BD
Is a digital differential pressure gauge switch
with a mounting bracket and a solenoid
driver.
G75-DP
Type
Stand
alone
Accessories
1
Mounting
Bracket
Latch Solenoid
Driver
B
D
5.39
GEVA-75 Index
Technical Specifications
Mechanical specifications
Programmable Settings
Manual Operation
PSI or BAR display
Time interval between pressure
measurements
Electrical specifications
Zero calibration
Display
at power down.
Mounting
Display resolution:
on the housing
Dimensions
43
60
57.7
41
1/8 BSP
TYPX2
89.5
M5
TYPX2
25
.8
58.8
(60)
5.40
SV-04-09
Technical Info
GEVA-75 Index
BACCARA
Notes
This solenoid is designed to operate only
with a Baccara valve.
To order valves manufactured to your specific
requirements, please contact our technical sales
department
How to Order
Example : G75-LDO-11021
Is a Geva 75 LDO 2WNC, 1/8"BSP, 1.2mm orifice,
24V AC Long Distance Operator.
G75-LDO
Function
2WNC
3WNC
3WNO
Port
1
3
4
None
1/8"BSP
1/8"NPT
Orifice
00
10
11
None(for 2W)
1
1.2
1.6
Voltage
0
1
2
3
24V AC &
12-24 V DC
5.41
GEVA-75 Index
Technical Specifications
Voltage:
12 - 24V DC or 24V AC
Current:
Holding 4 mA
Power:
12V - 50mW
Working Pressure 2W NC
Orifice
Pressure (bar)
24V - 100mW
Protection:
IP67
Ambient Temp:
Max 60 C
Weight :
80 gm
up to 2.0
12
Working Pressure 3W NC
Orifice
1.0
1.2
1.6
Pressure (bar)
16
11
Materials
Working Pressure 3W NO
Housing:
PP
Encapsulate:
Epoxy
Voltage
Conduit
Distance
section (mm2)
(km)
Orifice
1.0
1.2
1.6
Pressure (bar)
16
12
12 / 24
0.5
12
0.5
12
24
0.5
Dimensions
79
83
50
87
63.2
94
38.5
50.5
2W
3W
5.42
SV-04-09
Main Contents
Technical Info
Notes
Minimum pilot pressure 3 bar.
See graph of pilot pressure vs. line pressure.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
Pilot
Pressure
How to Order
Example : GC-2160-1N
Is a GC Globe cylinder with brass body,
1" BSP 2WNC with NBR seals.
GC
Body
Brass
St.st
Flow
under seat
Type
2
3
Globe
Port
1
1/4" BSP
1/4" NPT
3/8" BSP
3/8" NPT
1/2" BSP
1/2" NPT
3/4"BSP
3/4"NPT
1" BSP
1" NPT
Function
20
21
30
31
40
41
50
51
60
61
6.1
2W NC
2W NC
bidirectional
Seals
1
1a
NBR / PU
EPDM
Viton
PTFE
N
E
V
T
Flow
above seat
2/2 Way NC
Ports size:
See table
Temperature range:
Fluid: 60 C
Line Pressure
1/4"
Vacuum-10 Bar
3/8", 1/2"
12
Vacuum-10 Bar
3/4"
20
Vacuum-10 Bar
1"
25
Vacuum-10 Bar
Ambient: -10 C to 50 C
Materials in contact
Main valve :
Brass, St.st 316
Seals:
Pilot pressure
with fluid :
Orifice
(mm)
Size
1"
3/4"
1/4"
1/2"
2
1
0
-1
10
10
Line pressure
Flow above seat
12
1/4" BSP
62
58
50
32
23
1/8"BSP
3/8",1/2"BSP
78
69
65
38
27
1/8"BSP
3/4"BSP
86
89
69
55
34
1/8"BSP
1"BSP
110
100
89
65
36
1/8"BSP
Pilot pressure
10
8
6
4
1/4" - 1"
2
0
-1
Line pressure
Flow under seat
Dimensions
E
C
6.2
SV-04-09
Technical Info
Notes
Minimum pilot pressure 3 bar.
See graph of pilot pressure vs. line pressure.
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
outlets
NC
NO
How to Order
Example : GC-SM-02260-1N
Is a GC Globe cylinder operated stackable,
2 station, brass body, 1" BSP, 2WNC, NBR seals. with brass
body, 1" BSP 2WNC with NBR seals.
GC-SM
No.of
stations
specify quantity
Body
Brass
St.st
Port
2
3
1/4" BSP
1/4" NPT
3/8" BSP
3/8" NPT
1/2" BSP
1/2" NPT
3/4"BSP
3/4"NPT
1" BSP
1" NPT
Function
20
21
30
31
40
41
50
51
60
61
6.3
2W NC
2W NC
bidirectional
2W NO
1
1a
2
Seals
NBR
EPDM
Viton
N
E
V
Ports size:
See table
Temperature range:
Fluid: 60 C
Line Pressure
1/4"
Vacuum-10 Bar
3/8", 1/2"
12
Vacuum-10 Bar
3/4"
20
Vacuum-10 Bar
1"
25
Vacuum-10 Bar
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Orifice
(mm)
Size
Main valve :
Brass, St.st 316
Seals:
Pilot pressure
1"
3/4"
1/4"
1/2"
2
1
0
-1
1/4" BSP
62
58
50
32
23 1/8"BSP
3/8",1/2"BSP
78
69
65
38
27 1/8"BSP
12
86
89
69
55
34 1/8"BSP
10
110 100
89
65
36 1/8"BSP
1"BSP
10
10
Line pressure
Flow above seat
Pilot pressure
3/4"BSP
8
6
4
1/4" - 1"
2
0
-1
Line pressure
Flow under seat
Dimensions
A
27+40xN
M6 TYPx4
DEEP 12
13.5+40xN
40
N - Number of stations
1/8 BSP
7.5
1/2 BSP
28
13
19.4
43.9
1/2 BSP
TYP x N
10
63.75
6.4
17
40
A
SV-04-09
Technical Info
Notes
Minimum pilot pressure 3 bar.
See graph of pilot pressure vs. line pressure.
Stainless steel valves are available only in 3/8"
and 1/2".
To order valves manufactured to your specific
requirements, please contact our technical
sales department.
How to Order
Example : GC-2160-1T
Is a GC Globe cylinder with brass
body, 1" BSP 2WNC with PTFE seals.
GC
Body
Brass
St.st
Type
2
3
Globe
Port
1
3/8" BSP
3/8" NPT
1/2" BSP
1/2" NPT
3/4"BSP
3/4"NPT
1" BSP
1" NPT
Function
30
31
40
41
50
51
60
61
6.5
2W NC
Seals
1
PTFE
2/2 Way NC
Ports size:
See table
Temperature range:
Fluid: 150 C
Line Pressure
3/8", 1/2"
27
Vacuum-10 Bar
3/4"
20
Vacuum-10 Bar
1"
25
Vacuum-10 Bar
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Orifice
(mm)
Size
Main valve :
Brass, St.st 316
12
PTFE
10
Pilot pressure
Diaphragm:
8
6
4
2
0
-1
10
Line pressure
Size
3/8",1/2"
69
38
78
64.5
26.5
27
22
3/8",1/2"
1/8"
3/4"
90
55
85.5
68.5
33.5
33
3/4"
1/8"
1"
100
65
110
89
36
40
1"
1/8"
Dimensions
6.6
SV-04-09
Technical Info
Notes
Minimum pilot pressure 3 bar.
See graph of pilot pressure vs. line pressure.
To order valves manufactured to your specific requirements,
please contact our technical sales department.
How to Order
Example : GC-4160-1N
Is a GC Globe cylinder with nylon
body, 1" BSP 2WNC with NBR seals.
GC
Body
Nylon
Type
4
Globe
Port
1
3/4" BSP
3/4" NPT
1" BSP
1" NPT
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
50
51
60
61
70
71
80
81
6.7
2W NC
Seals
1
NBR
EPDM
Viton
Polyurethane
N
E
V
P
2/2 Way NC
Ports size:
See table
3/4", 1"
27
Vacuum-10 Bar
Temperature range:
Fluid: max 60 C
1-1/2, 2"
55
Vacuum-10 Bar
Orifice
(mm)
Size
Line Pressure
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Main valve :
Reinforced Nylon 6, St.st 303
Diaphragm:
12
Pilot pressure
10
8
6
4
2
0
-1
BSP/NPT
Size
3/4"
110
108
81
3/4"
1/8" BSP/NPT
1"
110
108
81
1"
1/8" BSP/NPT
1-1/2" 160
174
127 1-1/2"
1/8" BSP/NPT
185
127
1/8" BSP/NPT
2"
170
2"
10
Line pressure
Dimensions
6.8
SV-04-09
Technical Info
Pilot
Pressure
NO IN
OUT
NC EX
DIVERTOR
IN
How to Order
NO
EX
Example : GC-2209N
Is a GC cylinder with brass
body, 1/4" BSP 3W with NBR seals.
GC
Body
Brass
Port
2
1/4" BSP
1/4" NPT
3/8" BSP
3/8" NPT
1/2"BSP
1/2"NPT
Function
20
21
30
31
40
41
General
Purpose
Seals
9
6.9
NBR
Viton
EPDM
N
V
E
NC
IN
3/2 Way
Ports size:
See table
Temperature range:
Fluid: max 60 C
Size
Orifice
(mm)
1/4"
Vacuum-10 Bar
3/8", 1/2"
12
Vacuum-10 Bar
Line Pressure
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Main valve :
Brass
Minimum Pilot pressure
Seals Seat:
NBR, Viton, EPDM
12
10
8
6
4
2
0
-1
10
Line pressure
1/4"
60
90
34
1/8"
3/8", 1/2"
70
100
45
1/8"
Dimensions
6.10
SV-04-09
Technical Info
NC Ex
NO In
How to Order
Example : GC-4160-9P
NC In
NO Out
NO Ex
Divertor In
GC
Body
Nylon
Type
4
Globe
Port
1
3/4" BSP
3/4" NPT
1" BSP
1" NPT
1-1/2"BSP
1-1/2"NPT
2" BSP
2" NPT
Function
50
51
60
61
70
71
80
81
6.11
General
Purpose
Seals
9
Polyurethane
3/2 Way
Ports size:
See table
Temperature range:
Fluid: max 60 C
Size
Orifice
(mm)
3/4", 1"
27
Vacuum-5 Bar
1-1/2", 2"
55
Vacuum-5 Bar
Line Pressure
Ambient: -10 C to 50 C
Materials in contact
with fluid :
Main valve :
Reinforced Nylon 6
Seal Seat:
Polyurethane
Pilot pressure
[Bar]
10
8
6
4
2
0
BSP/NPT
Size
3/4"
110
142
81
3/4"
1/8" BSP/NPT
1"
110
142
81
1"
1/8" BSP/NPT
1-1/2" 160
264
126
1-1/2"
1/8" BSP/NPT
274
126
2"
1/8" BSP/NPT
2"
170
Line pressure
[Bar]
Dimensions
E BSP
E BSP
D BSP
NPT
D BSP
NPT
A
6.12
SV-04-09
Technical Info
Notes
The valve performances are a function of the tube dimensions
and hardness.
Please consult our technical sales department.
Maximum tube diameter: 9.5mm (2/2 way valves only)
Pilot Pressure
Pilot Pressure
2/2 Way
How to Order
Example : GC-P-11
Is a Pinch Valve for 6x4 silicon tube, 2W.
GC-P
Tube
Function
6x4
2W
8x5 *
3W
9.5x6.5 *
* 2W only
6.13
3/2 Way
Tubes:
Pressure range:
Temperature range:
Materials:
Valve :
Aluminium
Dimensions
28
44
50
28
28
25.4
M5
25.4
28
M5
2/2 Way
3/2 Way
6.14
SV-04-09
Main Contents
Accessories Idex
Circuit Versions
LED + Diode
DC only
LED AC/DC
1
K
black - grey - transparent
screw with conductor protection
2 or 3 +
18 mm
PG9 - PG11 - 1/2 NPTF
NBR profile (other types on request)
M3 x 32
H 12 (opposite to cable entry)
IP 65 (mated)
1,5 mm2
See How to Order coding.
See How to Order coding.
amber
1+
LED + Varistor
AC/DC
Bridge rectifier
+ LED+Varistor
AC/DC
2xLED + 2xVaristor
AC/DC
1-
1+
2+
2-
2-
12/24/48
120/230[V]
12/24/48[V]
Circuit Versions
12/24/48
120/230[V]
K
black - grey - transparent
screw with conductor protection
2 or +
11 mm
PG7 - PG9
NBR profile (other types on request)
M3 x 32
H 12 (opposite to cable entry)
IP 65 (mated)
1,5 mm2
See How to Order coding.
See How to Order coding.
amber
LED + Diode
DC only
LED AC/DC
LED + Varistor
AC/DC
1+
2-
12/24/48
120/230[V]
12/24/48[V]
12/24/48
120/230[V]
12/24/48
120/230[V]
7.1
3+
12/24/48
120/230[V]
40
40
23
Accessories Index
LED + Diode
DC only
LED AC/DC
1+
2-
12/24/48[V]
LED + Varistor
AC/DC
12/24/48
120/230[V]
26.8
18.8
12/24/48
120/230[V]
TECHNICAL DATA
Description
No. of contacts
Cable entry
Standard
Value
2 or 3 +
P67
PG9
PG11
1/2NPTF
cable OD 4-6mm
cable OD 6-8mm
cable OD 8-10mm
cable OD 8-10mm
Fixing system
Termination
Max. contact screw torque VDE 0627
Contact surface
Contact material
Conductor cross section
Housing material
Flammability
Insert material
Insert material
Protection class (mated) IEC 60 529
Operating temperature
Nominal current
Max. contact current
IEC 60 512-3
Rated voltage
IEC 60 664
Rated impulse voltage IEC 60 664
Overvoltage category
IEC 60 664
Contact resistance
IEC 60 512-2
Insulation resistance
Pollution degree
IEC 60 664
7.2
SV-05-10
Main Contents