The hydraulic pipe bending machine consists of a base plate, pillars, a top fix plate, return springs, and a hydraulic jack to apply bending force. The machine uses these parts to gradually apply up to 5000 kg of force to bend heavy pipes without damage. It can bend pipes easily and quickly with the hydraulic jack's adjusting screw, ram, and relief valve which allows fast release of the ram after bending.
The hydraulic pipe bending machine consists of a base plate, pillars, a top fix plate, return springs, and a hydraulic jack to apply bending force. The machine uses these parts to gradually apply up to 5000 kg of force to bend heavy pipes without damage. It can bend pipes easily and quickly with the hydraulic jack's adjusting screw, ram, and relief valve which allows fast release of the ram after bending.
The hydraulic pipe bending machine consists of a base plate, pillars, a top fix plate, return springs, and a hydraulic jack to apply bending force. The machine uses these parts to gradually apply up to 5000 kg of force to bend heavy pipes without damage. It can bend pipes easily and quickly with the hydraulic jack's adjusting screw, ram, and relief valve which allows fast release of the ram after bending.
The Hydraulic pipe bending machine consists of the following parts :
1. Base Plate Base Plate is the base member of the machine . The entire assembly of the machine is done on to the base plate. Base plate is structural steel (EN9). The pillars are mounted on to the base plate using Socket head bolts M8. 2. Pillar Pillar is an structural steel (EN9 vertical member of the structure of the press which is held on to the base plate using Socket head bolts M8. The pillar is provided with diameter 10mm holes equi-spaced (3 Nos ) to receive the Dowell pins which act as pivot for the die roller on left hand side 3. Top Fix Plate Top plate is structural steel (EN9 horizontal member of the structure of the press which is held on to the top of the LH & RH_ Pillars and held in place by using Spring washer, M20 Hex nut, and Lock nut. 4. Return Spring Return springs are attached to the ram of the jack which provide the automatic return after bending operation is over. 5. Hydraulic Jack Hydraulic jack is 3000 kg capacity with the following parts: a. Release valve b. Base c. Adjusting screw d. Ram e. Cylinder f. Oil Tight tank g. Top Cap h. Pump Body i. Pump Plunger j. Safe valve k. Handle. ADVANTAGES OF HYDRAULIC PIPE BENDING MACHINE 1. 5000 kg push force, makes possible bending of heavy sections possible 2. Ease of operation 3. Gradual application of force prevents the pipe damage. 4. Quick release of the ram using relief valve makes operation fast. 5. Ease of maintenance.