Professional Documents
Culture Documents
S&T Dimentions & Properties Handbook
S&T Dimentions & Properties Handbook
JAN 2013
HANDBOOK
STEEL
D&P
Introduction
Steel & Tube takes great pleasure in providing this Dimensions & properties Handbook for your use.
We endeavour to carry all popular products and sizes ex-stock, on a continuous basis. This latest
edition of the Steel & Tube Dimensions and Properties Handbook generally lists those sizes which we
carry ex-stock. However, there are some sizes that we offer on an indent basis only.
There are also many products that we carry, which do not feature in this particular publication. Please
contact your local Steel & Tube branch for further information on our comprehensive range of steel
products, or visit our web site www.steelandtube.co.nz, which features extensive product
information.
Please note: This document is in the process of being updated.
Indent Service: Steel & Tube's indent service can offer considerable savings when ordering product to
certain quantity or lead-time requirements. For specialist, non-standard products, talk to us about
bout global sourcing network 0800 478 335.
This is to be carried out in a manner sufficient to provide consumers with confidence in the quality of
products and services.
Disclaimer:
In compiling this publication we have been obliged to extract information from a wide range of
sources, both local and overseas, and whilst every precaution has been taken to ensure its accuracy
we do not accept any responsibility for errors or omissions which may be contained in this handbook.
D&P
Contents
Profiles....................................................................................................................................1
Equal Angles.............................................................................................................................1
Unequal Angles..........................................................................................................................7
Parallel Flange Channels............................................................................................................ 11
Taper Flange Channels.............................................................................................................. 13
DuraGal Profiles ....................................................................................................................14
DuraGal Equal Angles ............................................................................................................... 14
DuraGal Unequal Angles ........................................................................................................... 23
DuraGal Channels .................................................................................................................... 28
DuraGal Flats........................................................................................................................... 31
Plate.....................................................................................................................................32
Coil .....................................................................................................................................34
Wire and Sheet Metal Gauges..................................................................................................... 38
Reinforcing............................................................................................................................39
Rectangular Hollow Sections....................................................................................................40
DuraGal Rectangular Hollow Sections.......................................................................................... 44
Galtube Plus Rectangular Hollow Sections.................................................................................... 48
Square Hollow Sections...........................................................................................................49
DuraGal Square Hollow Sections.................................................................................................. 53
Galtube Plus Square Hollow Sections........................................................................................... 55
Joists Taper Flange Beams....................................................................................................56
Universal Beams.....................................................................................................................57
Universal Columns..................................................................................................................61
Tube and Pipe........................................................................................................................63
Standards for this Section......................................................................................................... 63
ERW Welded Tube..................................................................................................................... 64
Hollow Bar.............................................................................................................................. 65
Identification of Tube Wall Thicknesses........................................................................................ 66
Maximum Safe Working Pressures . ............................................................................................. 68
Tube and Pipe Quick Reference Tables......................................................................................... 70
Circular Hollow Sections . .......................................................................................................89
Galtube Plus Circular Hollow Sections.......................................................................................... 90
UltraPipe Circular Hollow Sections ..........................................................................................91
UltraPipe Pressure Ratings......................................................................................................... 93
Conversion and Comparison Information...................................................................................96
Useful Equivalents.................................................................................................................... 96
Imperial to Metric Conversion Factors......................................................................................... 97
Metric to Imperial Conversion Factors......................................................................................... 99
Comparison Grades International Table................................................................................... 101
Hardness Testing.................................................................................................................... 102
Tensile Testing....................................................................................................................... 108
Tensile Strength conversion.................................................................................................. 110
Pressure, mechanical stress conversion.................................................................................... 111
ii
mm
11.2
5.28
14.8
8.61
5.22
28.1
5.62
26.1
0.147
29.0
16.7
10.6
53.0
0.563
55.1
19.9
672
15.3
5.0
8.0
4.6
5.27
5 EA
23.8
14.7
11.0
6.44
29.0
7.15
26.2
0.187
28.9
21.6
13.6
53.0
0.722
54.5
20.5
867
11.5
5.0
8.0
6.0
6.81
6 EA
41.9
14.6
14.0
7.87
30.1
8.99
26.4
0.237
28.7
27.5
17.2
53.0
0.913
53.7
21.3
1110
8.62
5.0
8.0
7.8
8.73
8 EA
13.4
14.5
16.8
9.09
31.1
10.6
26.6
0.282
28.4
32.8
20.4
53.0
1.08
53.0
22.0
1340
6.89
5.0
8.0
9.5
10.5
10 EA
28.6
17.8
16.1
9.62
34.3
10.5
31.5
0.330
35.0
31.6
20.1
63.6
1.28
65.7
24.3
1050
14.0
5.0
8.0
6.0
8.22
6 EA
50.5
17.6
20.5
11.8
35.4
13.2
31.7
0.419
34.8
40.4
25.6
63.6
1.63
65.0
25.0
1350
10.5
5.0
8.0
7.8
10.6
8 EA
14.8
17.6
24.6
13.8
36.4
15.7
31.9
0.500
34.5
48.3
30.4
63.6
1.93
64.3
25.7
1620
8.47
5.0
8.0
9.5
12.7
19.8
20.0
12.1
37.9
13.1
35.0
0.458
39.1
39.3
25.2
70.7
1.78
73.2
10 EA
31.7
19.7
25.6
14.9
38.9
16.5
35.2
0.582
38.8
50.3
32.0
70.7
2.27
72.5
26.8
1170
15.7
5.0
8.0
6.0
9.16
6 EA
27.5
1500
11.8
5.0
8.0
7.8
11.8
8 EA
110
56.2
19.6
30.7
17.4
39.9
19.6
35.4
0.695
38.6
60.4
38.2
70.7
2.70
71.8
28.2
1810
9.53
5.0
8.0
9.5
14.2
19.5
37.9
20.8
41.3
23.9
35.8
38.2
74.5
46.6
70.7
75 x 75 x
90 x 90 x
10 EA
40.6
24.8
40.8
24.5
47.7
26.5
44.2
1.17
0.857
48.9
80.2
51.5
88.4
3.29
70.8
29.2
2260
7.33
5.0
8.0
17.7
4.55
91.3
33.7
1900
15.0
5.0
10.0
7.8
12.0
14.9
8 EA
100 x 100 x 12 EA
141
71.9
24.7
49.0
28.8
48.7
31.5
44.4
1.40
48.7
96.5
61.6
88.4
5.44
90.6
34.4
2300
12.2
5.0
10.0
9.5
18.0
24.5
60.8
34.5
50.1
38.6
44.7
1.73
48.3
120
10 EA
313
24.4
77.8
42.3
52.1
48.5
45.4
2.20
47.7
153
75.7
88.4
6.69
89.6
35.4
2870
9.42
5.0
10.0
12.0
22.5
12 EA
95.4
88.4
8.43
88.2
36.8
3710
6.91
5.0
10.0
15.8
29.1
125 x 125 x 16 EA
174
88.9
29.8
72.0
43.3
57.3
46.4
53.4
2.48
58.7
141
90.6
106
9.61
109
40.5
2790
14.8
5.0
13.0
9.5
21.9
10 EA
386
29.6
89.3
52.1
58.7
56.9
53.7
3.06
58.4
175
112
106
11.9
108
41.5
3480
11.5
5.0
13.0
12.0
27.3
12 EA
657
29.4
115
64.2
60.8
71.9
54.3
3.91
57.8
225
142
106
15.1
107
43.0
4520
8.49
5.0
13.0
15.8
35.4
16 EA
304
29.3
135
73.5
62.6
83.8
54.9
4.60
57.2
265
166
106
17.6
106
44.2
5360
6.89
5.0
13.0
19.0
42.1
150 x 150 x 19 EA
554
39.8
176
105
76.6
112
71.9
8.08
78.3
344
221
141
31.2
146
54.2
5090
14.4
5.0
18.0
13.0
40.0
13 EA
778
39.6
212
124
78.4
135
72.3
9.72
77.9
417
266
141
37.6
145
55.4
6200
11.5
5.0
18.0
16.0
48.7
16 EA
1060
39.4
236
5.0
18.0
18.0
54.4
18 EA
136
79.5
149
72.6
10.8
77.6
464
295
141
41.7
144
56.2
6930
10.1
5.0
18.0
20.0
60.1
20 EA
2250
323
141
45.7
143
57.0
7660
9.00
5.0
18.0
26.0
76.8
200 x 200 x 26 EA
39.3
39.0
402
141
56.8
141
59.3
9780
6.69
mm
mm
mm
kg/m
260
147
80.6
162
72.9
11.8
ry
Torsion
Constant
329
178
83.8
202
73.9
14.9
Zy5
Sy
103mm3 103mm3
77.2
x5
76.2
x3
511
rx
3
4
x3
About y-axis
x
= 45
y
643
Zx4
Sx
103mm3 103mm3
103mm4
mm
106mm4
mm
Zx1=
1 2
mm
y4
y1=
lx
nR=
pT
About x-axis
b1
nR
b 1-t
mm
nL=
pB
n
r 2 pB
pT
Zy3
103mm3
r2
Toe
Coordinate
of Centroid
Gross
Area of
Cross(b1-t) Section
t
Ag
mm2
nL
r1
b 1-t
mm
r1
Root
Radii
ly
106mm4
Actual
Thickness
mm
Mass
per
Nominal metre
Thickness
b1
mm
mm mm
b1 x b1
Leg-size
Designation
x- and y-axes
Dimensions and Properties
Equal Angles
Profiles
EQUAL
ANGLES
25 x 25 x
30 x 30 x
40 x 40 x
45 x 45 x
50 x 50 x
55 x 55 x
46.0
46.0
0.471
0.371
46.7
47.3
18.3
17.7
748
581
9.83
13.1
3.0
3.0
31.8
31.8
28.3
28.3
28.3
21.2
21.2
21.2
17.7
17.7
17.7
0.117
32.3
33.0 0.0790
28.0 0.0997
28.5 0.0801
29.2 0.0545
20.5 0.0387
21.0 0.0316
21.7 0.0218
16.7 0.0210
17.3 0.0173
17.9 0.0121
12.7
12.0
12.0
11.5
10.8
9.53
8.99
8.30
8.28
7.75
7.07
394
263
446
348
233
326
256
173
266
210
143
8.78
14.0
5.67
7.70
12.3
4.00
5.52
9.00
3.17
4.43
7.33
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
3.0
6.0
4.6
3.0
6.0
4.6
3.0
6.0
4.6
3.0
3.50
2.73
1.83
2.56
2.01
1.35
2.08
1.65
1.12
6 EA
5 EA
3 EA
6 EA
5 EA
3 EA
6 EA
5 EA
3 EA
0.685
0.980
1.19
1.03
1.49
1.83
1.93
2.83
3.53
2.48
3.66
1.13
1.65
2.03
1.67
2.45
3.06
3.06
4.55
5.75
3.92
5.84
0.0107
0.0142
0.0209
0.0265
0.0206
0.0303
10.7
13.9
14.0
14.3
15.7
15.8
10.9
15.3
15.2
15.0
17.3
17.2
0.373
0.537
0.669
0.554
0.799
0.993
1.02
1.49
1.86
1.31
1.91
9.99
11.0
11.7
11.7
12.7
13.5
15.3
16.2
17.0
17.0
18.0
1.26
1.59
1.58
2.33
2.95
2.02
2.99
1.07
0.319 0.583
0.428 0.849
0.513
0.488 0.862
0.660
0.790
0.930
1.29
1.55
1.21
1.68
4.73
4.72
4.75
5.76
5.72
5.72
7.82
7.75
7.71
8.85
8.76
0.515
1.66
3.44
0.605
1.98
4.16
0.785
2.63
5.60
0.875
2.96
6.32
4.6
8.71
2.06
3.79
3.10
2.04
3 EA
18.8
5 EA
2.39
1.01
16.0
31.8
0.146
31.7
13.3
506
6.50
3.0
5.0
6.0
3.97
6 EA
0.0383
3.38
9.90
2.53
1.55
18.7
1.65
17.6
0.0289
19.3
4.90
3.11
35.4
0.110
36.8
13.2
295
15.7
3.0
6.0
3.0
2.31
3 EA
17.0
7.21
9.78
3.75
2.15
19.7
2.40
17.6
0.0424
19.2
7.32
4.61
35.4
0.163
36.1
13.9
443
9.87
3.0
6.0
4.6
3.48
5 EA
7.41
15.2
9.71
4.76
2.61
20.5
3.01
17.8
0.0536
19.0
9.30
5.79
35.4
0.205
35.5
14.5
568
7.33
3.0
6.0
6.0
4.46
6 EA
4.59
3.71
9.66
6.00
3.14
21.5
3.73
18.1
0.0675
18.7
11.7
7.16
35.4
0.253
34.8
15.2
723
5.41
3.0
6.0
7.8
5.68
8 EA
7.93
10.8
4.57
2.66
21.5
2.94
19.4
10.7
0.0571
5.82
4.36
3.24
21.2
22.3
8.93
3.69
5.66
19.6
38.9
0.0723
0.220
21.0
39.8
11.4
15.2
7.14
489
38.9
11.0
0.278
3.0
39.2
6.0
15.8
9.37
12.9
6.46
3.83
25.0
4.18
23.0
0.0959
25.3
12.7
8.08
20.0
12.8
8.25
4.71
25.8
5.26
23.1
0.122
25.1
16.2
12.7
10.2
35.1
12.6
10.5
5.73
26.8
6.56
23.4
0.154
24.8
12.5
6.60
27.7
7.71
23.7
0.183
24.5
20.5
J
103mm4
ry
Torsion
Constant
mm
24.3
Zy5
Sy
103mm3 103mm3
mm
Zy3
103mm3
x5
4.6
3.0
3
4
x3
3.84
6.0
mm
x3
= 45
y
About y-axis
ly
106mm4
rx
1 2
mm
b1
n
r 2 pB
b 1-t
5 EA
6.0
nR
r1
pT
4.93
6.0
4.6
4.56
5 EA
nL
b 1-t
6 EA
6.0
6.0
5.87
628
12.8
46.0
0.589
46.0
19.0
957
8.17
15.0
46.0
0.691
45.4
19.6
1150
6 EA
Sx
103mm3 103mm3
Zx4
Zx1=
7.33
3.0
6.0
7.8
7.51
8 EA
y4
5.84
3.0
6.0
9.5
9.02
10 EA
65 x 65 x
y1=
lx
mm
nR=
pT
106mm4
nL=
pB
About x-axis
mm
Coordinate
of Centroid
mm
mm
r2
mm
r1
Toe
Gross
Area of
Cross(b1-t) Section
t
Ag
mm2
Radii
Root
mm
Actual
Thickness
kg/m
mm
Mass
per
Nominal metre
Thickness
mm mm
b1 x b1
Leg-size
b1
EQUAL
ANGLES
Designation
x- and y-axes
Dimensions and Properties
Profiles
300
300
320
320
300
320
320
320
320
320
320
320
320
320
320
125 x 125 x 16 EA
12 EA
10 EA
8 EA
100 x 100 x 12 EA
10 EA
8 EA
6 EA
90 x 90 x 10 EA
8 EA
6 EA
75 x 75 x 10 EA
8 EA
6 EA
5 EA
280
300
300
320
150 x 150 x 19 EA
16 EA
12 EA
10 EA
MPa
1.00
1.00
1.00
0.927
1.00
1.00
1.00
1.00
1.00
1.00
0.906
1.00
1.00
1.00
0.943
1.00
1.00
1.00
0.958
1.00
1.00
1.00
1.00
1.00
kf
fy
280
280
280
300
300
mm
Form
Factor
Yield Stress
200 x 200 x 26 EA
20 EA
18 EA
16 EA
13 EA
mm mm
Designation
x- and y-axes
Properties for Assessing Section Capacity
Equal Angles
30.5
25.4
18.7
13.2
45.0
36.0
25.9
69.9
55.1
43.7
30.9
143
110
83.2
64.3
13.6
11.6
8.85
6.47
20.4
16.7
12.4
31.1
25.2
20.4
14.8
63.4
50.3
38.9
30.7
110
95.7
72.3
54.5
267
218
196
172
136
300PLUS*
602
479
427
369
285
248
212
155
114
103mm3
103mm3
13.6
11.8
9.66
7.82
20.6
17.8
14.4
31.1
26.1
22.4
18.1
63.4
51.7
43.1
36.8
110
96.3
78.1
64.9
267
220
204
186
158
103mm3
Load D
Zey
About y-axis
Load B
Zey
Load A or C
Zex
About x-axis
Lo
ad
ad
Lo
ad
Lo
Shear
Centre
360
360
360
360
360
360
360
340
360
360
360
340
340
360
360
340
340
340
360
340
340
340
340
340
MPa
fy
ad
Lo
Yield Stress
kf
Form
Factor
1.00
1.00
1.00
0.876
1.00
1.00
0.954
1.00
1.00
1.00
0.856
1.00
1.00
1.00
0.892
1.00
1.00
1.00
0.906
1.00
1.00
1.00
1.00
0.956
30.5
25.1
18.4
12.8
44.5
35.4
25.3
69.9
54.4
42.9
30.0
143
109
81.6
62.7
248
209
152
111
602
469
417
362
278
103mm3
Load A or C
Zex
About x-axis
About y-axis
13.6
11.5
8.70
6.30
20.1
16.4
12.1
31.1
24.8
20.0
14.4
63.4
49.6
38.1
29.9
13.6
11.8
9.66
7.82
20.6
17.8
14.4
31.1
26.1
22.4
18.1
63.4
51.7
43.1
36.8
110
96.3
78.1
64.9
267
220
204
186
158
110
94.5
70.9
53.1
103mm3
103mm3
Load D
Zey
AS/NZS 3679.1-350
267
214
192
169
132
Load B
Zey
Profiles
EQUAL
ANGLES
8 EA
6 EA
5 EA
3 EA
6 EA
5 EA
3 EA
6 EA
5 EA
3 EA
6 EA
5 EA
3 EA
6 EA
5 EA
3 EA
50 x 50 x
45 x 45 x
40 x 40 x
30 x 30 x
25 x 25 x
320
320
320
320
320
320
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.907
1.00
1.00
1.00
1.00
1.00
1.00
1.78
1.47
1.03
2.74
2.23
1.50
5.29
4.25
2.59
6.88
5.39
3.19
10.7
8.69
6.60
3.82
0.769
0.642
0.479
1.19
0.990
0.714
2.33
1.93
1.25
3.06
2.47
1.55
4.71
3.92
3.08
1.90
4.84
3.70
9.90
8.59
6.76
5.05
10.7
7.88
103mm3
103mm3
300PLUS*
22.5
19.2
14.7
10.6
0.769
0.642
0.479
1.19
0.990
0.732
2.33
1.93
1.40
3.06
2.52
1.81
4.71
3.92
3.22
2.32
4.86
3.98
9.90
8.59
7.07
5.75
103mm3
Load D
Zey
About y-axis
Load B
Zey
Load A or C
Zex
About x-axis
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
MPa
fy
Yield Stress
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.954
1.00
1.00
1.00
0.858
1.00
1.00
1.00
1.00
1.00
1.00
kf
ad
Lo
Form
Factor
ad
Lo
1.78
1.47
1.03
2.74
2.23
1.48
5.29
4.22
2.54
6.88
5.32
3.12
10.7
8.69
6.50
3.71
10.5
7.75
22.5
19.2
14.5
10.4
103mm3
Load A or C
Zex
103mm3
0.769
0.642
0.479
1.19
0.990
0.705
2.33
1.92
1.23
3.06
2.44
1.52
4.71
3.92
3.03
1.85
4.78
3.64
9.90
8.59
6.66
4.94
0.769
0.642
0.479
1.19
0.990
0.732
2.33
1.93
1.40
3.06
2.52
1.81
4.71
3.92
3.22
2.32
4.86
3.98
9.90
8.59
7.07
5.75
103mm3
Load D
Zey
About y-axis
Load B
Zey
AS/NZS 3679.1-350
About x-axis
ad
Lo
Shear
Centre
ad
Lo
1. For OneSteel-300PLUS
sections the tensile
strength (fu) is 440
MPa.
2. For Grade 350 sections
the tensile strength (fu)
is 480 MPa.
3. OneSteel-300PLUS hot
rolled sections are
produced to exceed the
minimum requirements
of AS/NZS 3679.1-300.
4. OneSteel-300PLUS
replaced Grade 250 as
the base grade for these
sections in 1994.
Notes:
EQUAL
ANGLES
320
320
320
320
320
320
320
320
320
320
320
320
6 EA
5 EA
55 x 55 x
MPa
kf
fy
320
320
320
320
mm
Form
Factor
Yield Stress
65 x 65 x 10 EA
8 EA
6 EA
5 EA
mm mm
Designation
x- and y-axes
Properties for Assessing Section Capacity
Profiles
-16.9
-15.5
-14.0
-11.6
-6.48
-5.58
-4.40
-3.56
-3.11
-2.48
-2.02
-1.69
-1.22
-1.00
-0.842
-0.661
-0.716
-0.604
-0.475
-0.399
-0.338
-0.268
-0.208
61.5
61.8
62.2
45.4
45.8
46.3
46.6
37.9
38.3
38.6
38.8
30.3
30.6
30.8
31.0
27.4
27.6
27.7
22.6
22.7
22.9
23.0
330
296
243
189
160
124
99.9
109
85.0
68.4
56.8
53.2
42.9
35.7
27.8
34.4
28.7
22.4
23.4
19.6
15.3
11.8
183
164
135
105
88.7
68.8
55.2
60.3
47.0
37.8
31.3
29.3
23.6
19.6
15.3
18.9
15.7
12.3
12.8
10.7
8.35
6.44
144
145
146
106
107
108
109
88.2
89.6
90.6
91.3
70.8
71.8
72.5
73.2
64.3
65.0
65.7
53.0
53.7
54.5
55.1
427
363
250
220
180
149
144
119
99.4
84.9
71.1
60.1
51.7
41.8
47.3
40.9
33.2
31.0
27.0
22.1
17.9
54.2
44.2
43.0
41.5
40.5
36.8
35.4
34.4
33.7
29.2
28.2
27.5
26.8
25.7
25.0
24.3
22.0
21.3
20.5
19.9
11.1
9.48
7.46
6.04
5.32
4.21
3.42
2.86
2.08
1.70
1.42
1.12
1.22
1.02
0.805
0.681
0.575
0.455
0.355
16 EA
12 EA
10 EA
125 x 125 x 16 EA
12 EA
10 EA
8 EA
100 x 100 x 12 EA
10 EA
8 EA
6 EA
90 x 90 x 10 EA
8 EA
6 EA
75 x 75 x 10 EA
8 EA
6 EA
5 EA
103mm3
255
mm
141
143
103mm3
605
505
467
mm
59.3
57.0
56.2
55.4
106mm4
35.8
28.8
26.3
23.7
19.7
mm mm mm
20 EA
18 EA
16 EA
13 EA
150 x 150 x 19 EA
ZnT=ZpR
200 x 200 x 26 EA
nR=pT
ln=lp
Designation
-20.9
61.3
nR
pB
363
201
nL
pT
mm
Sn=Sp
60.5
b1-t
460
b1
r2
103mm3
r1
T p
Product of 2nd
Moment of Area
lnp
106mm4
ZnB=ZpL
b1
rn=rp
n- and p-axes
Dimensions and Properties
Equal Angles
b1-t
Profiles
EQUAL
ANGLES
-0.254
-0.218
-0.175
-0.138
19.7
19.9
20.1
14.6
11.5
8.97
8.07
6.34
4.94
46.7
47.3
-0.0928
-0.0756
-0.0602
-0.0405
-0.0538
-0.0432
-0.0292
-0.0366
-0.0296
-0.0201
-0.0140
-0.0116
-0.00804
-0.00750
-0.00632
-0.00446
14.9
15.1
15.2
15.3
13.5
13.6
13.8
11.9
12.0
12.2
8.71
8.83
8.93
7.13
7.23
7.33
8.38
6.63
5.19
3.46
5.30
4.16
2.77
4.12
3.24
2.17
2.22
1.76
1.18
1.49
1.19
0.802
4.61
3.64
2.85
1.89
2.91
2.28
1.51
2.26
1.77
1.18
1.21
0.951
0.635
0.807
0.638
0.426
34.8
35.5
36.1
36.8
31.7
32.3
33.0
28.0
28.5
29.2
20.5
21.0
21.7
16.7
17.3
17.9
10.5
8.90
7.36
5.25
6.93
5.76
4.14
5.24
4.39
3.19
2.59
2.22
1.66
1.63
1.42
1.08
15.2
14.5
13.9
13.2
13.3
12.7
12.0
12.0
11.5
10.8
9.53
8.99
8.30
8.28
7.75
7.07
0.160
0.129
0.103
0.0694
0.0922
0.0734
0.0498
0.0631
0.0505
0.0344
0.0247
0.0200
0.0138
0.0135
0.0110
0.00765
50 x 50 x 8 EA
6 EA
5 EA
3 EA
45 x 45 x 6 EA
5 EA
3 EA
40 x 40 x 6 EA
5 EA
3 EA
30 x 30 x 6 EA
5 EA
3 EA
25 x 25 x 6 EA
5 EA
3 EA
-0.103
-0.0814
16.8
6.34
3.48
39.8
9.12
15.2
0.139
16.7
5 EA
8.11
0.175
55 x 55 x 6 EA
4.46
13.2
17.7
0.234
5 EA
39.2
16.2
18.3
0.296
6 EA
11.1
46.0
19.6
19.0
0.371
15.8
9.62
8 EA
103mm3
mm
45.4
22.3
Sn=Sp
103mm3
mm
19.5
nR
pB
17.4
103mm3
nL
pT
mm
65 x 65 x 10 EA
19.6
0.437
mm mm mm
Product of 2nd
Moment of Area
lnp
106mm4
ZnT=ZpR
b1-t
rn=rp
b1
r2
nR=pT
nL=pB
r1
T p
ZnB=ZpL
ln=lp
106mm4
b1
EQUAL
ANGLES
Designation
n- and p-axes
Dimensions and Properties
b1-t
Profiles
kg/m
mm
mm
mm
mm
r1
mm
r2
Root Toe
Radii
pB
mm
mm2
mm
nL
Coordinate
of
Centroid
Ag
Gross
Area of
Cross
(b1-t) (b2-t) Section
Ix
106mm4
Zx1
y4
Zx4
y5
L
r1
Zx5
p
b2
nL B y
b2-t
Sx
rx
r2 PB
y1
About X-axis
b1
Zy2
y5 5
1 2
y4
x3
Zy3
About y-axis
x5
x3
y1
x5
Zy5
Sy
ry
Torsion Tan
Con- Alpha
stant
9.5 8.0 5.0 12.2 6.89 1810 42.3 17.5 3.20 83.8 38.2 59.3 53.9 33.9 94.4 65.8 42.0 0.476 19.2 24.9 41.6 11.4 30.7 15.5 24.1 16.2 56.2 0.360
7.8 8.0 5.0 15.0 8.62 1500 41.5 16.8 2.68 84.2 31.8 58.9 45.5 33.3 80.4 54.6 42.2 0.399 18.6 21.5 41.8 9.55 29.9 13.3 20.1 16.3 31.7 0.363
6.0 8.0 5.0 19.8 11.5 1170 40.7 16.0 2.10 84.7 24.8 58.5 36.0 32.8 64.1 42.4 42.5 0.315 18.0 17.5 42.1 7.47 29.0 10.8 15.7 16.4 14.8 0.364
10 UA 14.2
8 UA 11.8
6 UA 9.16
125 x 75 x 12 UA 17.7 12.0 8.0 5.0 9.42 5.25 2260 43.3 18.4 3.91 83.2 47.0 59.7 65.5 34.6 113 81.4 41.6 0.585 19.9 29.3 41.4 14.1 31.9 18.4 29.7 16.1 110 0.356
7.8 10.0 5.0 18.2 10.5 1820 49.2 19.6 4.73 101 46.7 70.3 67.3 39.5 120 80.1 51.0 0.710 22.1 32.2 50.6 14.0 35.2 20.2 29.5 19.7 39.0 0.364
8UA 14.3
1.04 23.4 44.5 50.1 20.8 37.2 28.0 43.8 19.5 136 0.360
12 UA 21.6 12.0 10.0 5.0 11.5 6.50 2750 51.0 21.2 6.97 100 69.4 71.3 97.8 40.8 171 120 50.4
9.5 10.0 5.0 14.8 8.47 2200 50.0 20.2 5.66 101 56.1 70.7 80.1 40.1 141 96.6 50.7 0.847 22.6 37.4 50.4 16.8 36.1 23.5 35.4 19.6 69.0 0.363
1.32 24.6 53.8 49.9 26.5 38.9 34.0 55.9 19.3 300 0.353
150 x 90 x 16 UA 27.9 15.8 10.0 5.0 8.49 4.70 3550 52.5 22.7 8.80 99.5 88.4 71.9 122 41.9 210 154 49.8
10 UA 17.3
1.09 26.9 40.7 53.0 20.6 40.7 26.9 41.8 21.8 71.9 0.441
1.35 27.6 48.8 52.9 25.5 42.0 32.1 51.7 21.7 141 0.438
x2
y x2
9.5 10.0 5.0 14.8 9.53 2300 48.1 23.3 6.11 103 59.5 74.9 81.5 34.6 177 102 51.6
10 UA 18.0
Iy
106mm4
b1-t
150 x 100 x 12 UA 22.5 12.0 10.0 5.0 11.5 7.33 2870 49.1 24.3 7.51 102 73.5 75.3 99.7 35.2 213 127 51.2
mm
b1 x b2
Leg-size
Designation
x- and y-axes
Dimensions and Properties
Unequal Angles
Profiles
UNEQUAL
ANGLES
mm
pB
mm
Ag
mm2
mm
nL
Ix
106mm4
Zx1
y4
Zx4
y5
Zx5
Sx
rx
y1
About X-axis
b2
Iy
106mm4
Zy2
y5 5
y4
x3
Zy3
About y-axis
x5
x3
y1
x5
Zy5
Sy
ry
Torsion Tan
Con- Alpha
stant
x2
1 2
4.6 7.0 3.0 15.3 9.87 560 23.8 11.5 0.370 51.5 7.17 37.2 9.93 17.2 21.5 12.3 25.7 0.0666 13.2 5.03 26.6 2.50 20.1 3.32 5.09 10.9 4.32 0.437
7.8 6.0 3.0 7.33 5.41 840 21.1 13.6 0.421 44.9 9.37 36.3 11.6 11.6 36.4 16.1 22.4 0.0936 15.6 6.00 23.9 3.91 22.3 4.20 7.49 10.6 17.6 0.570
6.0 6.0 3.0 9.83 7.33 658 20.4 12.9 0.338 45.2 7.48 36.1 9.35 11.2 30.2 12.7 22.7 0.0743 15.1 4.91 23.9 3.11 21.4 3.48 5.93 10.6 8.29 0.575
4.6 6.0 3.0 13.1 9.87 512 19.8 12.4 0.267 45.4 5.89 35.9 7.43 10.9 24.5 9.92 22.8 0.0587 14.8 3.97 23.9 2.46 20.6 2.85 4.66 10.7 3.87 0.577
5 UA 4.40
6 UA 5.16
5 UA 4.02
6.0 7.0 3.0 11.5 7.33 721 24.4 12.1 0.468 51.2 9.15 37.5 12.5 17.6 26.7 15.8 25.5 0.0842 13.6 6.17 26.5 3.18 20.8 4.04 6.48 10.8 9.21 0.435
6 UA 5.66
65 x 50 x 8 UA 6.59
6.0 8.0 5.0 15.7 11.5 1020 30.3 17.9 1.25 69.7 17.9 54.0 23.1 17.9 70.0 30.1 35.1 0.265 21.4 12.4 36.5 7.27 30.3 8.75 13.9 16.2 13.0 0.551
7.8 7.0 3.0 8.62 5.41 921 25.2 12.8 0.586 50.8 11.5 37.8 15.5 18.0 32.5 20.0 25.2 0.106 14.2 7.46 26.4 4.01 21.7 4.88 8.19 10.7 19.5 0.430
6 UA 7.98
75 x 50 x 8 UA 7.23
7.8 8.0 5.0 11.8 8.62 1310 31.1 18.7 1.59 69.4 22.9 54.3 29.2 18.2 87.0 38.7 34.8 0.337 21.8 15.4 36.4 9.26 31.3 10.7 17.8 16.0 27.8 0.549
mm
Coordinate
of
Centroid
r2 PB
b1-t
y x2
8 UA 10.3
mm
r2
Gross
Area of
Cross
(b1-t) (b2-t) Section
r1
nL B y
9.5 8.0 5.0 9.53 6.89 1580 31.8 19.4 1.89 62.9 27.3 54.5 34.6 18.6 101 46.5 34.6 0.401 22.3 18.0 36.4 11.0 32.2 12.5 21.0 16.0 49.1 0.546
kg/m
r1
Root Toe
Radii
b2-t
100 x 75 x 10 UA 12.4
mm
mm
mm
b1 x b2
Leg-size
b1
UNEQUAL
ANGLES
Designation
x- and y-axes
Dimensions and Properties
Profiles
39.8
31.1
25.2
21.0
21.2
17.2
14.3
11.2
16.6
13.9
10.9
6.02
4.77
3.75
5.86
4.67
3.68
28.3
20.6
15.4
20.3
15.2
11.6
7.75
15.7
12.4
8.68
5.85
4.30
3.02
5.86
4.40
3.17
104
79.5
57.9
70.5
57.2
44.7
28.7
40.9
32.1
20.7
17.3
13.7
9.30
14.1
11.2
7.64
94.6
68.8
51.2
67.6
50.6
38.8
25.8
38.8
30.6
21.4
16.8
12.4
8.66
14.1
10.6
7.59
1.00
0.940
0.836
1.00
1.00
0.931
0.799
1.00
1.00
0.917
1.00
1.00
0.926
1.00
1.00
1.00
340
360
360
340
360
360
360
360
360
360
360
360
360
360
360
360
31.1
25.2
21.0
21.2
17.2
14.3
11.2
16.6
13.9
10.9
6.02
4.77
3.75
5.86
4.67
3.68
28.8
21.2
15.9
20.6
15.5
11.9
8.07
15.9
12.6
8.93
5.93
4.37
3.10
5.86
4.46
3.23
104
81.8
60.3
70.5
57.2
46.0
30.1
40.9
33.1
21.8
17.3
13.7
9.65
14.1
11.2
7.92
96.3
70.6
53.1
68.6
51.6
39.8
26.8
39.4
31.2
22.0
17.0
12.6
8.89
14.1
10.7
7.76
1.00
0.973
0.863
1.00
1.00
0.964
0.824
1.00
1.00
0.946
1.00
1.00
0.956
1.00
1.00
1.00
300
320
320
300
320
320
320
320
320
320
320
320
320
320
320
320
10 UA
8 UA
125 x 75 x 12 UA
10 UA
8 UA
6 UA
100 x 75 x 10 UA
8 UA
6 UA
75 x 50 x 8 UA
6 UA
5 UA
65 x 50 x 8 UA
6 UA
5 UA
12 UA
30.9
39.0
133
130
1.00
340
39.8
39.5
133
300
150 x 90 x 16 UA
132
38.2
1.00
34.7
Zey
103mm3
25.3
320
10 UA
102
110
103mm3
78.9
0.975
300
150 x 100 x 12 UA
100
AS/NZS 3679.1-350
103mm3
Load D
73.0
1.00
103mm3
Zey
0.943
340
MPa
Zex
360
38.2
103mm3
Zex
30.9
300PLUS*
103mm3
kf
About y-axis
Load B
26.0
1.00
103mm3
103mm3
fy
Load C
About x-axis
Load A
81.7
MPa
Zey
Form
Factor
74.8
mm
Zey
Yield
Stress
35.3
mm
Zex
Zex
Load D
About y-axis
Load B
110
mm
kf
fy
Load C
About x-axis
ad
Lo
Load A
Shear
Centre
Form
Factor
ad
ad
Yield
Stress
Lo
ad
Lo
Lo
Designation
Unequal Angles
Notes:
1. For OneSteel-300PLUS
sections the tensile
strength (fu) is 440
MPa.
2. For Grade 350 sections
the tensile strength (fu)
is 480 MPa.
3. OneSteel-300PLUS hot
rolled sections are
produced to exceed the
minimum requirements
of AS/NZS 3679.1-300.
4. OneSteel-300PLUS
replaced Grade 250 as
the base grade for these
sections in 1994.
Profiles
EQUAL
ANGLES
10
-1.85
-2.35
-1.89
-1.54
-1.29
-1.05
-0.867
-0.731
-0.575
-0.625
-0.528
-0.416
-0.174
-0.140
-0.111
-0.141
-0.114
-0.0903
24.6
25.0
25.3
25.5
20.6
20.9
21.0
21.2
21.7
21.9
22.0
14.0
14.2
14.3
14.4
14.6
14.7
59.5
45.7
36.5
30.1
31.4
25.1
20.7
16.0
24.3
20.2
15.7
8.96
6.98
5.41
8.74
6.85
5.32
32.0
25.0
20.2
16.8
16.9
13.7
11.4
8.89
13.4
11.1
8.67
4.86
3.84
3.00
4.78
3.77
2.95
67.3
68.8
69.8
70.4
56.6
57.5
58.2
59.0
55.6
56.3
57.1
37.2
37.9
38.5
36.4
37.1
37.6
94.9
81.0
69.5
60.4
52.0
45.2
39.6
32.7
38.3
33.5
27.5
14.1
12.0
10.0
12.7
10.8
8.96
22.7
21.2
20.2
19.6
18.4
17.5
16.8
16.0
19.4
18.7
17.9
12.8
12.1
11.5
13.6
12.9
12.4
2.15
1.72
1.41
1.18
0.958
0.789
0.664
0.524
0.743
0.626
0.494
0.181
0.145
0.115
0.174
0.140
0.111
47.4
47.8
48.2
48.4
39.6
39.9
40.1
40.3
31.3
31.5
31.7
23.6
23.8
23.9
20.1
20.3
20.5
145
114
91.5
76.0
77.3
62.5
52.0
40.6
41.3
34.4
26.9
18.5
14.6
11.4
14.1
11.1
8.70
81.7
63.5
51.0
42.3
43.3
34.9
28.9
22.5
22.6
18.8
14.6
10.3
8.05
6.27
7.75
6.10
4.75
97.5
99.0
100
101
81.7
82.7
83.5
84.3
68.2
68.9
69.7
49.8
50.6
51.2
43.9
44.6
45.2
152
123
102
86.6
81.8
68.2
58.1
46.5
48.6
41.8
33.7
20.3
16.7
13.5
16.2
13.4
10.9
52.5
51.0
50.0
49.2
43.3
42.3
41.5
40.7
31.8
31.1
30.3
25.2
24.4
23.8
21.1
20.4
19.8
7.97
6.29
5.10
4.26
3.54
2.88
2.41
1.89
1.55
1.30
1.02
0.511
0.407
0.321
0.341
0.272
0.215
150 x 90 x 16 UA
12 UA
10 UA
8 UA
125 x 75 x 12 UA
10 UA
8 UA
6 UA
100 x 75 x 10 UA
8 UA
6 UA
75 x 50 x 8 UA
6 UA
5 UA
65 x 50 x 8 UA
6 UA
5 UA
-2.27
28.8
106mm4
44.7
mm
28.6
24.9
56.0
103mm3
Product of 2nd
Moment of Area
lnp
76.7
30.9
103mm3
rp
81.9
mm
75.7
Sp
23.3
96.2
103mm3
ZpR
1.91
mm
24.3
nR
About p-axis
48.0
2.34
106mm4
ZpL
94.0
mm
47.7
nL
51.9
117
103mm3
lp
102
64.6
103mm3
rn
110
mm
101
Sn
B
nR
n
pB
48.1
133
103mm3
ZnT
nL
5.29
mm
49.1
pT
About n-axis
pT
10 UA
106mm4
ZnB
r2
6.52
mm mm
pB
b2
r1
b1-t
150 x 100 x 12 UA
mm
ln
b1
b2-t
UNEQUAL
ANGLES
Designation
n- and p-axes
Dimensions and Properties
Unequal Angles
Profiles
35.90
15.00
10.60
7.82
4.59
1.64
0.424
0.106
238.0
108.0
101.0
81.4
54.9
23.1
13.2
8.13
28.4
23.5
23.8
23.8
23.9
20.8
15.9
12.6
107.0
61.0
58.9
53.8
46.0
27.2
14.4
8.2
127.0
77.8
67.8
61.5
51.6
30.2
1.76 33.6
1.65 32.7
1.51 29.9
1.29 25.7
80.9
72.9
60.8
40.4 0.267
0.12
91.4
8.01 16.0
8.71
3.64 59.3
99.9
421
271
221
182
129
73
40.3
21.4
361
233
191
157
111
63.5
34.7
18.2
45.1
26.8
19.1
14.1
8.34
3.97
1.74
0.683
58.5
46.7
50.5
50.3
51.0
45.0
33.9
27.2
28.6
22.6
24.4
24.5
24.9
21.8
16.7
13.7
4520
3200
2920
2660
2250
1520
1060
754
5.47
5.71
5.75
6.27
7.26
8.04
6.84
5.94
27.5
31.7
29.3
26.3
21.8
23.4
20.6
16.5
220
206
176
158
131
110
86.6
62.8
12
12
12
12
10
8
8
8
8.0
6.5
6.0
6.0
6.0
4.7
4.2
3.8
15.0
12.0
12.0
11.0
9.5
7.5
6.7
6.1
90
75
75
75
75
65
50
40
250
230
200
180
150
125
100
75
8.31
5.92
100 x 50 PFC
75 x 40 PFC
4.56
58.20
290.0
28.1
117.0
148.0
4.04 64.4
119.0
564
483
72.4
56.1
27.2
5110
5.13
33.5
268
14
8.0
16.0
90
300
30.1
472.0 151.00
mm
30.4
161.0
236.0
6.48 89.4
mm
147.0
946
798
152
mm
56.7
mm
27.5
7030
Iw
109mm6
5.14
J
103mm4
34.5
ry
mm
Sy
345
ZyL
mm
ZyR
103mm3
ly
106mm4 103mm3
rx
14
Sx
mm
Zx
103mm3 103mm3
Warping
Constant
10.0
Ix
106mm4
Torsion
Constant
mm
X0
17.5
XL
Ag
mm
2tf
xL
Load B
About y-axis
100
tw
About x-axis
Shear
Centre
Load A
mm
d1
r1
d1
CoordiGross
Area of Coordi- nate of
Cross nate of Shear
(bf-tw) Section Centroid Centre
380
tw
Depth
Root Between
Radii Flanges
tf
d1
xo
tf
bf
Web
Thickness
bf
r1
tw
tf
103mm3
Flange
Thickness
Flange
Width
bf - t w
mm2
Designation
OneSteel-300PLUS
Profiles
PARALLEL
FLANGE
CHANNELS
11
12
L
xL
12.0
6.84
6.84
21.4
1
360
360
75PFC
6.84
6.84
21.4
320
320
75 x 40 PFC
22.8
12.0
40.3
1
360
360
100PFC
12.0
12.0
40.3
320
320
100 x 50 PFC
38.5
22.5
72
1
360
360
125PFC
22.8
22.8
72.8
320
320
125 x 65 PFC
44.8
38.5
129
1
360
360
150PFC
38.5
38.5
129
320
320
150 x 75 PFC
49.1
44.1
182
1
360
340
180PFC
44.8
44.8
182
320
300
180 x 75 PFC
50.4
44.5
221
1
360
340
200PFC
49.1
46.7
221
320
300
42.6
271
200 x 75 PFC
89.0
84.9
421
360
340
230PFC
50.4
360
340
250PFC
89.0
45.1
271
320
88.7
421
320
300
230 x 75 PFC
96.6
77.2
300
250 x 90 PFC
134
104
564
360
340
300PFC
946
360
340
380PFC
96.6
82.3
564
134
115
946
320
300
300 x 90 PFC
320
280
Load B
Zey
103mm3
Zex
103mm3
Designation
About y-axis
Load B
Load A
Zey
103mm3
Load B
Zey
103mm3
Load A
Zey
103mm3
Form
Factor
kf
Web
fy
MPa
Flange
fy
MPa
About x-axis
Shear
Centre
Load A
Zex
103mm3
Designation
AS 3679.1-350
tf
d1
xo
Form
Factor
kf
About y-axis
bf
r1
tw
tf
Web
fy
MPa
About x-axis
bf - t w
Flange
fy
MPa
OneSteel-300PLUS
PARALLEL
FLANGE
CHANNELS
1. For OneSteel-300PLUS
sections the tensile
strength (fu) is 440
MPa.
2. For Grade 350 sections
the tensile strength (fu)
is 480 MPa.
3. OneSteel-300PLUS hot
rolled sections are
produced to exceed the
minimum requirements
of AS/NZS 3679.1-300.
4. OneSteel-300PLUS
replaced Grade 250 as
the base grade for these
sections in 1994.
Notes:
Profiles
Mass per
metre
kg/m
9.36
6.92
Designation
A B
mm mm
100 x 50 TFC
70 X 40 TFC
mm
t1
Thickness
7.5
mm
t2
mm
r1
Corner
Radius
mm
r2
882
12.7
15.5
mm
mm2
1192
Centre of
Gravity
cy
Area of
Section
t2
B t1
2
95
1.89
0.759
Jy
r2
r2
0.124
0.269
106mm4
Moment of
Inertia
106mm4
Jx
r1
29.3
39.8
mm
ix
mm
iy
ix
iy iy
ix
11.9
15.0
Radius of
Gyration
cy y
20.2
37.8
4.54
7.82
Zy
103mm3
Modulus of
Section
Zx
103mm3
Profiles
TAPER
FLANGE
CHANNELS
13
14
x
x5
3
4
x3
y4
24.8
24.9
39.6
24.4
19.9
25.8
16.0
13.2
24.7
15.7
12.9
1.11
0.699
0.572
50.0
50.4
50.5
82.7
50.0
40.7
53.5
32.7
26.7
4.73
2.89
2.36
1890
1140
926
42.8
43.6
43.4
44.6
44.5
44.4
88.4
88.4
88.4
8.0
4.0
4.0
8.0
4.7
3.8
14.9
8.95
7.27
11.7
5.0 CA
4.0 CA
8.92
10.5
6.37
6.0 CA
90 x 90 x 8.0 CA
5.0 CA
4.7
8.0
6.0
8.0
4.0
8.0
8.0
8.0
63.6
63.6
70.7
70.7
32.2
32.3
35.5
35.8
31.2
30.4
33.6
33.9
811
1330
1140
1490
1.06
1.70
1.83
2.36
16.6
26.7
25.8
33.4
25.5
41.7
39.8
52.0
8.06
12.7
12.5
16.0
12.4
19.7
19.0
24.7
58.2
17.6
17.0
19.3
19.0
29.3
7.83
12.0
11.9
15.1
38.1
0.252
0.386
0.421
0.542
36.7
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5 mm fy = 350 MPa and fu = 400 MPa, for 2.5 mm < t < 6.0 mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0 mm fy
36.1
35.7
40.1
39.8
1.96
Notes:
F These items are not commonly stocked but are available on request. A minimum order quantity may apply on some sizes.
29.9
24.1
35.6
23.4
ry
mm
23.0
Sy
103mm3
1.23
60.2
103mm3
Zy5
60.6
120
103mm3
72.4
Iy
106mm4
47.6
78.3
mm
5.04
8.30
103mm3
Sx
1380
2290
103mm3
Zx1 = Zx4
52.4
51.6
mm
53.4
53.5
mm
mm
106
x2 = x3
y1 = y4
106
8.0
mm
4.0
8.0
mm
4.7
mm
10.8
rx
About y-axis
18.0
About x-axis
Zy2 = Zy3
= 45
5.0 CA
Ix
106mm4
mm2
y1
Section Properties
x5
kg/m
Full
Area of
Section
Af
b2
mm
Co-ordinates
of
Centroid
ri
mm
Actual
Thickness
t
Inside
Corner
Radius
ri
b1
Mass
per
metre
duragal
equal
angels
Designation
Nominal
Leg Size Thickb1
b2 ness
Dimensions
x- and y-axes
Dimensions and Full Section Properties
Grade C450L0 / C400L0 (TS 100)
DuraGal
Profiles
x3
9.45
9.54
9.79
3.56
2.94
1.95
2.28
1.91
1.28
2.16
1.81
1.24
0.0389
0.0324
0.0221
19.8
19.9
20.1
7.53
6.20
4.04
4.80
3.99
2.63
0.170
0.141
0.0930
435
356
230
17.1
16.9
17.2
18.0
17.9
17.8
35.4
35.4
35.4
4.0
4.0
2.5
4.7
3.8
2.4
3.42
2.79
1.81
2.50
1.62
2.20
1.43
1.06
5.0 CA
4.0 CA
2.5 CA
45 x 45 x 4.0 CA
2.5 CA
40 x 40 x 4.0 CA
2.5 CA
30 x 30 x 2.5 CA
10.2
13.7
13.4
15.4
134
182
280
206
0.0191
0.0468
0.0702
0.0673
0.902
1.65
2.48
2.11
1.40
2.55
3.89
3.25
11.9
16.0
15.8
18.1
0.00438
0.0110
0.0157
0.0159
0.408
0.768
1.10
0.990
0.431
0.801
1.17
1.03
1.52
0.664
1.22
1.82
1.57
2.35
5.71
7.75
7.50
8.77
8.52
10.7
14.3
14.3
16.0
4.98
21.2
28.3
28.3
31.8
16.1
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5 mm fy = 350 MPa and fu = 400 MPa, for 2.5 mm < t < 6.0 mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0 mm fy = 400
2.5
2.5
4.0
2.5
4.0
Notes:
2.4
2.4
3.8
2.4
3.8
1.43
9.00
4.18
2.71
2.44
0.0434
19.7
9.29
5.89
0.208
536
16.0
17.8
35.4
8.0
6.0
4.21
50 x 50 x 6.0 CA
0.0231
12.6
5.13
3.36
3.22
0.0747
26.0
10.7
6.93
0.318
470
22.2
23.2
46.0
4.0
3.8
3.69
4.0 CA
17.9
12.5
6.24
4.03
3.87
0.0902
25.9
13.0
8.39
0.386
576
22.4
23.3
46.0
4.0
4.7
4.52
5.0 CA
3.19
12.1
7.50
4.91
4.52
0.104
25.8
16.2
10.4
0.477
716
21.3
23.1
46.0
8.0
6.0
5.62
65 x 65 x 6.0 CA
0.102
14.7
6.93
4.55
4.39
0.117
30.1
14.3
9.34
0.495
546
25.8
26.7
53.0
4.0
3.8
4.29
4.0 CA
318
14.6
8.44
5.48
5.29
0.142
30.0
17.5
11.3
0.601
670
25.9
26.8
53.0
4.0
4.7
5.26
5.0 CA
15.2
14.1
10.2
6.73
6.26
0.167
29.9
21.9
14.1
0.747
836
24.8
26.7
53.0
8.0
6.0
6.56
31.8
13.9
13.2
8.46
7.89
0.213
29.6
28.4
18.0
0.957
1090
25.1
26.9
53.0
8.0
8.0
8.59
ry
mm
6.0 CA
Sy
103mm3
75 x 75 x 8.0 CA
Zy5
103mm3
Zy2 = Zy3
103mm3
Iy
106mm4
rx
mm
Sx
103mm3
103mm3
Ix
106mm4
mm2
x2 = x3
mm
About y-axis
mm
About x-axis
mm
mm
Actual
Thickness
t
Inside
Corner
Radius
ri
mm
Zx1 = Zx4
x5
3
4
y4
mm
x5
x
= 45
Section Properties
y1
kg/m
y1 = y4
mm
b2
mm
ri
Full
Area of
Section
Af
Co-ordinates
of
Centroid
b1
Mass
per
metre
Designation
Nominal
Leg Size Thickb1
b2 ness
Dimensions
x- and y-axes
Dimensions and Full Section Properties
Grade C450L0 / C400L0 / C350L0 (TS 100)
DuraGal
Profiles
duragal
equal
angels
15
16
8.0
24.6
26.2
65.4
63.8
811
1330
0.654
1.04
1.12
28.4
27.9
31.5
31.2
18.0
29.5
28.2
10.0
16.3
15.6
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5 mm fy = 350 MPa and fu = 400 MPa, for 2.5 mm < t < 6.0 mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0
26.6
39.8
40.3
Notes:
F These items are not commonly stocked but are available on request. A minimum order quantity may apply on some sizes.
4.7
8.0
1140
36.8
-0.402
-0.657
-0.703
-0.910
6.37
72.1
20.4
10.5
27.9
50.6
5.0 CA
8.0
1.45
90 x 90 x 8.0 CA
6.0
1490
8.92
6.0 CA
71.3
11.7
28.7
-0.896
39.8
28.8
16.0
44.5
1.47
926
92.0
33.0
4.0
3.8
7.27
4.0 CA
8.0
-1.10
39.7
35.3
19.6
53.8
1.80
1140
91.6
33.4
4.0
4.7
8.95
5.0 CA
8.0
-1.81
39.2
58.5
32.4
83.5
2.92
1890
90.1
34.9
8.0
8.0
14.9
-1.91
-3.17
106mm4
47.7
47.3
mm
rn=rp
51.2
85.2
Sn=Sp
103mm3
28.4
47.2
ZnT=ZpR
103mm3
79.1
125
103mm3
ZnB=ZpL
3.14
5.13
In=Ip
106mm4
1380
2290
mm2
110
109
mm
39.6
41.2
mm
Product of
2nd Moment
of Area
Inp
4.0
8.0
mm
nR
Section Properties
nL
4.7
8.0
mm
pB
pT
10.8
kg/m
Full
Area of
Section
Af
b2
18.0
mm
Co-ordinates
of
Centroid
pB=nL
pT=nR
ri
5.0 CA
mm
mm
Inside
Corner
Radius
ri
Size
b2
Leg
b1
Normal
Thickness
Actual
Thickness
Dimensions
Mass
per
metre
b1
duragal
equal
angels
Designation
n- and p-axes
Dimensions and Full Section Properties
DuraGal
Profiles
kg/m
103mm3
In = Ip
106mm4
nR
Sn = Sp
1.62
2.20
1.43
1.06
2.5 CA
40 x 40 x 4.0 CA
2.5 CA
30 x 30 x 2.5 CA
2.5
2.5
4.0
2.5
8.61
11.1
11.8
12.4
21.4
28.9
28.2
32.6
134
182
280
206
0.0118
0.0289
0.0430
0.0416
1.37
2.60
3.65
3.36
0.550
0.999
1.52
1.27
0.994
1.80
2.75
2.30
9.35
12.6
12.4
14.2
-0.00738
-0.0179
-0.0272
-0.0257
Notes:
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Full section properties are calculated in accordance with AS/NZS 4600.
2.4
2.4
3.8
2.4
-0.0392
-0.0355
2.50
45 x 45 x 4.0 CA
14.0
15.8
2.86
1.58
4.23
0.0576
230
36.4
13.6
2.5
2.4
1.81
2.5 CA
3.52
-0.0544
15.6
4.39
2.43
6.08
0.0868
356
35.7
14.3
4.0
3.8
2.79
4.0 CA
1.95
-0.0655
15.5
5.33
2.95
7.14
0.104
435
35.4
14.6
4.0
4.7
3.42
5.0 CA
4.79
-0.0823
15.3
6.59
3.64
8.15
0.126
536
34.6
15.4
8.0
6.0
4.21
50 x 50 x 6.0 CA
0.0623
-0.122
20.5
7.56
4.18
10.9
0.197
470
47.0
18.0
4.0
3.8
3.69
4.0 CA
318
-0.148
20.3
9.22
5.10
13.0
0.238
576
46.6
18.4
4.0
4.7
4.52
5.0 CA
32.0
-0.186
20.2
11.5
6.35
15.2
0.291
716
45.8
19.2
8.0
6.0
5.62
65 x 65 x 6.0 CA
13.0
-0.189
23.7
10.1
5.62
14.9
0.306
546
54.5
20.5
4.0
3.8
4.29
4.0 CA
4.0
-0.230
23.5
12.4
6.86
17.8
0.372
670
54.1
20.9
4.0
4.7
5.26
5.0 CA
3.8
-0.290
23.4
15.5
8.57
21.1
0.457
836
53.3
21.7
8.0
6.0
6.56
6.0 CA
106mm4
-0.372
23.1
20.1
11.1
26.0
0.585
1090
52.5
mm
rn = rp
Product of
2nd Moment
of Area
Inp
22.5
103mm3
103mm3
ZnT = ZpR
Section Properties
nL
pB
pT
8.0
pT = nR
mm2
pB= nL
mm
ZnB = ZpL
mm
b2
8.0
mm
ri
Full
Area of
Section
Af
Co-ordinates
of
Centroid
8.59
mm
Actual
Thickness
t
Inside
Corner
Radius
ri
b1
75 x 75 x 8.0 CA
mm
mm
mm
Mass
per
metre
Designation
Nominal
Leg Size Thickb1
b2 ness
Dimensions
n- and p-axes
Dimensions and Full Section Properties
Grade C450L0 / C400L0 / C350L0 (TS 100)
DuraGal
Profiles
duragal
equal
angels
17
18
24.7
15.7
12.9
1.11
0.699
0.572
23.9
10.2
7.31
1.05
0.368
0.248
46.9
19.4
14.0
3.90
1.34
0.917
0.809
0.491
0.409
1530
560
379
400
450
450
13.6
24.7
30.8
13.6
24.7
30.8
16.0
8.7
7.8
8.0
4.7
3.8
14.9
8.95
7.27
11.7
8.92
10.5
6.37
5.0 CA
4.0 CA
6.0 CA
90 x 90 x 8.0 CA
5.0 CA
4.7
8.0
6.0
8.0
8.7
16.0
14.0
16.0
17.3
9.25
14.3
10.5
17.3
9.25
14.3
10.5
450
400
450
400
530
1330
859
1410
0.654
1.00
0.756
0.946
0.672
1.70
1.38
2.36
12.2
26.7
21.3
33.4
60.8
0.185
0.386
0.363
0.542
1.56
6.33
12.0
10.7
15.1
31.4
0.252
0.386
0.421
0.542
1.96
7.83
12.0
11.9
15.1
36.7
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Ae is calculated for sections with uniform axial compressive stress fy.
3. Ie and Ze are calculated with the extreme compression or tension fibres at fy (first yield). Ze is calculated at the extreme tension or compression fibre of the effective section.
4. Iex1 and Zex1 are for compression at point 1; Iex4 and Zex4 are for compression at point 4; Iey2,3 and Zey2,3 are for compression at points 2 and 3; Iey5 and Zey5
are for compression at point 5.
5. Effective section properties are calculated in accordance with AS/NZS 4600.
F These items are not commonly stocked but are available on request. A minimum order quantity may apply on some sizes.
Notes:
23.0
1.23
13.2
0.544
25.3
Zey5
103mm3
1.99
5.74
106mm4
Iey5
0.416
0.701
103mm3
Zey2,3
572
1610
Iey2,3
106mm4
450
400
103mm3
Zex1 = Zex4
30.1
16.8
106mm4
Iex1 = Iex4
30.1
16.8
mm2
8.7
16.0
MPa
fy
4.7
8.0
10.8
mm
About y-axis
18.0
mm
About x-axis
5.0 CA
Ae
Af
Effective
Area of
Section
Ae
3
4
kg/m
mm
b2 - ro
b1 - ro
Yield
Stress
Grade
mm
Ratios
b2
mm
Actual
Thickness
t
Outside
Corner
Radius
ro
ro
Mass
per
metre
b1
duragal
equal
angels
Designation
Nominal
Leg Size Thickb1
b2 ness
Dimensions
x- and y-axes
Effective Section Properties
Grade C450L0 / C400L0 (TS 100)
DuraGal
Profiles
Iey5
Zey5
1.62
2.20
1.43
1.06
2.5 CA
40 x 40 x 4.0 CA
2.5 CA
30 x 30 x 2.5 CA
4.9
4.9
7.8
4.9
10.5
14.6
8.47
16.7
10.5
14.6
8.47
16.7
350
350
450
350
132
147
280
152
0.980
0.806
1.00
0.736
0.0191
0.0385
0.0702
0.0494
0.902
1.45
2.48
1.71
0.00438
0.0104
0.0157
0.0135
0.408
0.740
1.10
0.884
0.00438
0.0110
0.0157
0.0159
0.408
0.768
1.10
0.990
Notes:
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Ae is calculated for sections with uniform axial compressive stress fy.
3. Ie and Ze are calculated with the extreme compression or tension fibres at fy (first yield). Ze is calculated at the extreme tension or compression fibre of the effective section.
4. Iex1 and Zex1 are for compression at point 1; Iex4 and Zex4 are for compression at point 4; Iey2,3 and Zey2,3 are for compression at points 2 and 3; Iey5 and Zey5
are for compression at point 5.
5. Effective section properties are calculated in accordance with AS/NZS 4600.
2.4
2.4
3.8
2.4
1.43
1.24
0.0231
2.50
45 x 45 x 4.0 CA
1.43
0.0221
1.03
0.0169
1.98
0.0615
0.676
156
350
18.8
18.8
4.9
2.4
1.81
2.5 CA
0.0231
1.81
0.0324
1.81
0.0324
3.78
0.131
0.888
316
450
11.1
11.1
7.8
3.8
2.79
4.0 CA
3.19
2.16
0.0389
2.16
0.0389
4.80
0.170
1.00
435
450
8.79
8.79
8.7
4.7
3.42
5.0 CA
0.102
2.44
0.0434
2.44
0.0434
5.89
0.208
1.00
536
450
6.00
6.00
14.0
6.0
4.21
50 x 50 x 6.0 CA
0.952
3.22
0.0747
2.83
0.0619
5.54
0.230
0.727
342
450
15.1
15.1
7.8
3.8
3.69
4.0 CA
303
3.87
0.0902
3.87
0.0902
7.65
0.337
0.846
487
450
12.0
12.0
8.7
4.7
4.52
5.0 CA
450
4.52
0.104
4.52
0.104
10.4
0.477
1.00
716
450
8.5
8.50
14.0
6.0
5.62
65 x 65 x 6.0 CA
9.79
4.39
0.117
3.49
0.0840
6.78
0.310
0.646
353
450
17.7
17.7
7.8
3.8
4.29
4.0 CA
9.79
5.29
0.142
4.84
0.125
9.41
0.458
0.759
508
450
14.1
14.1
8.7
4.7
5.26
5.0 CA
7.8
6.26
0.167
6.26
0.167
13.9
0.735
0.934
781
3.8
7.89
0.213
7.89
0.213
18.0
0.957
1.00
1090
450
103mm3
400
106mm4
7.38
103mm3
10.2
106mm4
About y-axis
Zey2,3
7.38
103mm3
Iey2,3
10.2
106mm4
Zex1 = Zex4
About x-axis
Iex1 = Iex4
14.0
mm2
Ae
Af
16.0
MPa
fy
Effective
Area of
Section
Ae
3
4
6.0
mm
Yield
Stress
8.0
mm
b2 - ro
b1 - ro
b2
6.56
kg/m
Outside
Corner
Radius
ro
ro
8.59
mm
Actual
Thickness
t
Grade
b1
6.0 CA
mm
Mass
per
metre
Ratios
75 x 75 x 8.0 CA
mm
Leg Size
b1
b2
Designation
Nominal
Thickness
Dimensions
x- and y-axes
Effective Section Properties
Grade C450L0 / C400L0 / C350L0(TS 100)
DuraGal
Profiles
duragal
equal
angels
19
20
14.5
8.92
10.5
6.37
6.0 CA
90 x 90 x 8.0 CA
5.0 CA
4.7
8.7
16.0
14.0
16.0
17.3
9.25
14.3
17.3
9.25
14.3
450
400
450
400
530
1330
859
1410
0.654
1.00
0.756
0.357
1.04
0.782
1.45
6.58
16.3
12.1
20.4
0.629
1.04
1.12
1.45
9.83
16.3
15.6
20.4
F These items are not commonly stocked but are available on request. A minimum order quantity may apply on some sizes.
Notes:
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Ae is calculated for sections with uniform axial compressive stress fy.
3. Ie and Ze are calculated with the extreme compression or tension fibres at fy (first yield). Ze is calculated at the extreme tension or compression fibre of the effective section.
4. IenT and ZenT are for compression at point T; IenB and ZenB are for compression at point B; IepR and ZepR are for compression at point R; IepL and ZepL are for
compression at point L.
5. Effective section properties are calculated in accordance with AS/NZS 4600.
8.0
6.0
8.0
0.946
11.7
10.5
18.4
1.20
6.01
0.357
0.409
379
450
30.8
30.8
7.8
3.8
7.27
4.0 CA
10.5
32.4
1.57
9.13
0.594
0.491
560
450
24.7
24.7
8.7
4.7
8.95
5.0 CA
25.9
2.92
27.8
2.34
0.809
1530
400
13.6
13.6
16.0
8.0
14.9
46.8
2.57
5.04
11.0
33.8
0.791
3.17
0.416
0.701
572
1610
450
400
30.1
16.0
16.8
103mm3
ZenB = ZepL
30.1
8.0
16.8
106mm4
8.7
103mm3
IenB = IepL
4.7
106mm4
IenT = IepR
n
R
10.8
mm2
Ae
Af
18.0
MPa
fy
Effective
Area of
Section
Ae
5.0 CA
mm
Yield
Stress
Grade
b2
mm
b2 - ro
b1 - ro
Ratios
ro
kg/m
mm
Actual
Thickness
t
Outside
Corner
Radius
ro
mm
mm
Mass
per
metre
Dimensions
b1
duragal
equal
angels
Designation
Nominal
Leg Size Thickb1
b2 ness
n- and p-axes
Effective Section Properties
Grade C450L0 / C400L0 (TS 100)
DuraGal
Profiles
kg/m
n
R
2.50
1.62
2.20
1.43
1.06
45 x 45 x 4.0 CA
2.5 CA
40 x 40 x 4.0 CA
2.5 CA
30 x 30 x 2.5 CA
4.9
4.9
7.8
4.9
10.5
14.6
8.47
16.7
10.5
14.6
8.47
16.7
350
350
450
350
132
147
280
152
0.980
0.806
1.00
0.736
0.0118
0.0231
0.0430
0.0281
0.550
0.856
1.52
0.972
0.0118
0.0289
0.0430
0.0414
0.550
0.999
1.52
1.27
Notes:
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Ae is calculated for sections with uniform axial compressive stress fy.
3. Ie and Ze are calculated with the extreme compression or tension fibres at fy (first yield). Ze is calculated at the extreme tension or compression fibre of the effective section.
4. IenT and ZenT are for compression at point T; IenB and ZenB are for compression at point B; IepR and ZepR are for compression at point R; IepL and ZepL
are for compression at point L.
5. Effective section properties are calculated in accordance with AS/NZS 4600.
2.4
2.4
3.8
2.4
1.95
1.56
0.0560
1.08
0.0333
0.676
156
350
18.8
18.8
4.9
2.4
1.81
2.5 CA
0.0623
2.43
0.0868
2.34
0.0821
0.888
316
450
11.1
11.1
7.8
3.8
2.79
4.0 CA
1.95
2.95
0.104
2.95
0.104
1.00
435
450
8.79
8.79
8.7
4.7
3.42
5.0 CA
0.0623
3.64
0.126
3.64
0.126
1.00
536
450
6.00
6.00
14.0
6.0
4.21
50 x 50 x 6.0 CA
0.952
4.17
0.195
3.13
0.129
0.727
342
450
15.1
15.1
7.8
3.8
3.69
4.0 CA
303
5.10
0.238
4.65
0.208
0.846
487
450
12.0
12.0
8.7
4.7
4.52
5.0 CA
450
6.35
0.291
6.35
0.291
1.00
716
450
8.5
8.50
14.0
6.0
5.62
65 x 65 x 6.0 CA
9.79
5.51
0.293
3.62
0.162
0.646
353
450
17.7
17.7
7.8
3.8
4.29
4.0 CA
9.79
6.86
0.372
5.45
0.266
0.759
508
450
14.1
14.1
8.7
4.7
5.26
5.0 CA
7.8
8.57
0.457
8.57
0.457
0.934
781
450
10.2
10.2
14.0
6.0
6.56
6.0 CA
3.8
11.1
0.585
11.1
103mm3
ZenB = ZepL
0.585
106mm4
1.00
103mm3
IenB = IepL
1090
106mm4
IenT = IepR
400
mm2
Ae
Af
7.38
MPa
fy
7.38
Effective
Area of
Section
Ae
16.0
b2 - ro
b1 - ro
Yield
Stress
b2
ro
8.0
mm
Outside
Corner
Radius
ro
Grade
8.59
mm
Actual
Thickness
t
Ratios
b1
75 x 75 x 8.0 CA
mm
mm
mm
Mass
per
metre
Designation
Nominal
Leg Size Thickb1
b2 ness
Dimensions
n- and p-axes
Effective Section Properties
Grade C450L0 / C400L0 / C350L0(TS 100)
DuraGal
Profiles
duragal
equal
angels
21
22
kg/m
mm
1.53
0.396
1.35
0.350
10.5
6.37
8.59
6.56
5.26
4.29
5.62
4.52
3.69
4.21
3.42
2.79
1.81
2.50
1.62
2.20
1.43
1.06
90 x 90 x 8.0 CA
5.0 CA
75 x 75 x 8.0 CA
6.0 CA
5.0 CA
4.0 CA
65 x 65 x 6.0 CA
5.0 CA
4.0 CA
50 x 50 x 6.0 CA
5.0 CA
4.0 CA
2.5 CA
45 x 45 x 4.0 CA
2.5 CA
40 x 40 x 4.0 CA
2.5 CA
30 x 30 x 2.5 CA
11.7
8.92
6.43
3.20
1.71
0.442
8.59
4.24
2.26
23.4
10.0
4.93
2.63
28.5
5.97
31.9
13.6
40.4
8.39
4.46
14.9
8.95
7.27
49.0
10.1
18.0
10.8
10.2
13.5
13.7
15.2
15.5
16.6
16.8
17.0
17.3
21.9
22.2
22.3
25.1
25.5
25.7
25.8
30.4
31.0
33.9
34.3
42.8
43.4
43.5
51.6
52.2
103mm4
Coordinate
of
Shear Centre
x0
Torsion
Constant
16.6
22.0
22.4
24.9
25.3
27.1
27.5
27.8
28.2
35.8
36.2
36.4
41.0
41.6
41.9
42.2
49.7
50.6
55.4
56.0
69.9
70.8
71.1
84.3
85.2
mm
r01
Polar Radius of
Gyration about the
Shear Centre
40.7
53.9
54.9
61.0
61.9
66.5
67.4
68.0
69.0
87.7
88.6
89.2
100
102
103
103
122
124
136
137
171
173
174
206
209
mm
Monosymmetry
Section
Constant
x
Shear
Centre
= 45
xo y
duragal
equal
angels
mm
mm
mm
Mass
per
metre
Designation
Nominal
Leg Size Thickb1 b2 ness
x- and y-axes
Section Properties for Member Stability
Grade C450L0 / C400L0 / C350L0 (TS 100)
DuraGal
Profiles
3.71
0.0524
26.3
8.15
b1
6.15
0.312
451
0.464
18.3
26.1
14.1
38.3
50.8
4.0
3.8
ro
x3
x
y4
10.7
10.8
4.08
2.87
2.01
10.3
ry
4.96
5.97
Sy
3.42
x
4.10
Zy5
2.42
2.89
Zy3
About y-axis
x5
y1
Notes:
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Full section properties are calculated in accordance with AS/NZS 4600.
b2
y sizes.
quantity may apply on some sizes. Please contact your local Steel & Tube branch for information and availability
on these
x
3 A minimum order
F DuraGal Unequal Angles are not a common stock item but sizes 100 x 75, 125 x 75, 150 x 100 in 6 or 8mm wall thickness are also available5 on request.
10.4
4.38
0.0631
12.7t 26.2
9.83
7.47
0.378
553
0.462
18.5
26.1
14.4
38.4
50.6
4.89
1
0.0731
26.0
15.7
11.9
9.29
0.464
686
0.472
17.8
25.3
14.9
39.2
50.0
4.0
Zy2
8.0
mm
Iy
4.7
rx
6.0
Sx
F 75 x 50 x 6.0 CA 5.38
5.0 CA 4.34
F
4.0 CA 3.54
F
mm2
Zx4
mm
About x-axis
mm
Zx1
mm
Ix
mm
x3
mm
x2
mm
y4
mm
Tan
a
kg/m
x5
Section Properties
ri
x2
mm mm mm
y1
Coordinates of Centroid
y
b2
b1
Designation
Nominal
Leg Size Thickb1 b2 ness
Dimensions
x- and y-axes
Dimensions and Full Section Properties
Grade C450L0 (TS 100)
DuraGal
Profiles
duragal
equal
angels
23
24
mm2
Iex1
Zex1
Iex4
Zex4
Iey2,3
Zey2,3
Iey5
Zey5
2.42
2.01
0.0631
0.0524
2.42
1.99
0.0631
0.0520
7.47
6.10
0.378
0.309
6.17
4.30
0.286
0.185
0.854
0.741
472
334
450
11.1
17.7
7.8
3.8
3.54
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Ae is calculated for sections with uniform axial compressive stress fy.
3. Ie and Ze are calculated with the extreme compression or tension fibres at fy (first yield). Ze is calculated at the extreme tension or compression fibre of the effective section.
4. Iex1 and Zex1 are for compression at point 1; Iex4 and Zex4 are for compression at point 4; Iey2,3 and Zey2,3 are for compression at points 2 and 3; Iey5 and Zey5
are for compression at point 5.
5. Effective section properties are calculated in accordance with AS/NZS 4600.
Notes:
quantity may apply on some sizes. Please contact your local Steel & Tube branch for information and availability on these sizes.
F DuraGal Unequal Angles are not a common stock item but sizes 100 x 75, 125 x 75, 150 x 100 in 6 or 8mm wall thickness are also available on request. A minimum order
2.89
0.0731
2.89
0.0731
9.29
0.464
9.29
0.464
0.960
658
103mm3
450
106mm4
450
103mm3
8.79
106mm4
6.00
103mm3
14.1
106mm4
10.2
103mm3
8.7
106mm4
About y-axis
14.0
Af
About x-axis
3
4
4.7
fy
MPa
Ae
6.0
mm
b2 - ro
t
Effective
Area of
Section
Ae
Yield
Stress
Grade
ro
4.34
mm
b1 - ro
t
Ratios
y
b2
5.38
kg/m
mm mm mm
Outside
Actual
Corner
Thickness Radius
t
ro
b1
duragal
equal
angels
F 75 x 50 x 6.0 CA
5.0 CA
F
4.0 CA
F
Mass
per
metre
Designation
Nominal
Leg Size Thickb1 b2 ness
Dimensions
x- and y-axes
DuraGal
Profiles
9.86
8.44 T 2.57
0.144
0.119
0.0983
23.9
p 24.2
14.2
11.5
7.98
6.43
15.3
13.0
0.393
0.323
686
553
37.3
38.0
12.7
12.0
49.3
50.2
25.7
24.8
ZpR
4.34
ZpL
Sp
p
3.12
3.87
4.54
5.56
6.97
14.8
-0.120
-0.151
14.6
14.5
Inp
106mm4
mm
rp
Product of
2nd Moment
of Area
24.4
50.6
11.7
38.3
451
0.266
10.9
5.26
9.43
24.3
p bfy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm
2
400 MPa and fu = 450 MPa).
p
2. Full section properties are calculated in accordance with AS/NZS 4600.
Notes:
3.54
-0.0991
t
F DuraGal Unequal Angles are not a common stock item but sizes 100 x 75, 125 x 75, 150 x 100 in 6 or 8mm wall thickness are also available on request. A minimum order
L
b 1 availability
n sizes.
quantity may apply on some sizes. Please contact your local Steel & Tube branch for information and
on these
n
n
n
ro
11.4
Ip
5.38
rn
mm
F 75 x 50 x 6.0 CA
5.0 CA
F
4.0 CA
F
Sn
ZnT
mm2
mm
nL
mm
pT
ZnB
mm
In
nL nR
pB
About p-axis
mm
nR
pB
pT
Section Properties
kg/m
About n-axis
p b
2
ri
mm mm mm
Full Area
of Section
Af
Mass
per
metre
Coordinates of Centroid
b1
Designation
Nominal
Leg Size Thickb1 b2 ness
Dimensions
n- and p-axes
Dimensions and Full Section Properties
Grade C450L0 (TS 100)
DuraGal
Profiles
duragal
equal
angels
25
26
3.87
3.12
2.55
0.144
0.119
0.0967
3.87
3.12
2.43
0.144
0.119
0.0909
7.98
6.43
5.26
0.393
0.323
0.266
7.98
5.29
3.59
0.393
0.243
0.153
0.960
0.854
0.741
658
472
334
450
11.1
17.7
7.8
3.8
3.54
ZepL
450
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy =
400 MPa and fu = 450 MPa).
2. Ae is calculated for sections with uniform axial compressive stress fy.
3. Ie and Ze are calculated with the extreme compression or tension fibres at fy (first yield). Ze is calculated at the extreme tension or compression fibre of the effective section.
4. IenT and ZenT are for compression at point T; IenB and ZenB are for compression at point B; IepR and ZepR are for compression at point R; IepL and ZepL
are for compression at point L.
5. Effective section properties are calculated in accordance with AS/NZS 4600.
Notes:
quantity may apply on some sizes. Please contact your local Steel & Tube branch for information and availability on these sizes.
F DuraGal Unequal Angles are not a common stock item but sizes 100 x 75, 125 x 75, 150 x 100 in 6 or 8mm wall thickness are also available on request. A minimum order
106mm4
103mm3
450
103mm3
IepL
8.79
106mm4
6.00
103mm3
About p-axis
ZepR
14.1
106mm4
IepR
10.2
103mm3
ZenB
8.7
106mm4
IenB
14.0
mm2
MPa
fy
ZenT
4.7
mm
6.0
mm
b2 - ro
b1 - ro
Effective
Area of
Section
Ae
Yield
Stress
About n-axis
4.34
IenT
5.38
Ae
Af
F 75 x 50 x 6.0 CA
5.0 CA
F
4.0 CA
F
Grade
kg/m
Ratios
p b
2
ro
mm mm mm
Outside
Actual
Corner
Thickness Radius
t
ro
Mass
per
metre
b1
duragal
UNequal
angels
Designation
Nominal
Leg Size Thickb1 b2 ness
Dimensions
n- and p-axes
DuraGal
Profiles
79.2
80.2
80.8
39.2
39.2
39.3
36.6
36.9
37.2
16.2
16.2
16.2
17.3
17.6
17.7
8.23
4.07
2.17
5.38
4.34
3.54
5.0 CA
4.0 CA
75 x 75 x 6.0 CA
1. Steel grade C450L0 / C400L0 / C350L0 (for t < 2.5mm fy = 350 MPa and fu = 400 MPa, for 2.5mm < t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy = 400
MPa and fu = 450 MPa).
2. With the exception of J, properties are calculated assuming a simplified shape where the bends are eliminated and the section is represented by straight mid-lines in
accordance with Clause 2.1.2.1 of AS/NZS 4600.
3. x is zero for equal angles.
4. Iw is equal to zero for angles.
5. The shear centre is assumed to be located at the intersection of the centre lines of the angle legs.
F DuraGal Unequal Angles are not a common stock item but sizes 100 x 75, 125 x 75, 150 x 100 in 6 or 8mm wall thickness are also available on request. A minimum order
quantity may apply on some sizes. Please contact your local Steel & Tube branch for information and availability on these sizes.
Notes:
F
F
F
y0
mm
mm
mm
mm
mm
mm
mm
Monosymmetry
Section
Constants
x0
Polar Radius of
Gyration about the
Shear Centre
r01
mm
Coordinate
of
Shear Centre
xo y
Torsion
Constant
Shear
Centre
yo
103mm4
Mass
per
metre
kg/m
Nominal
Leg Size Thickb1 b2 ness
Designation
x- and y-axes
Section Properties for Member Stability
Grade C450L0 (TS 100)
DuraGal
Profiles
duragal
UNequal
angels
27
28
kg/m
12.4
11.6
10.5
7.23
5.59
4.25
5.0 CC
180 x 75 x 5.0 CC
150 x 75 x 5.0 CC
125 x 65 x 4.0 CC
100 x 50 x 4.0 CC
75 x 40 x 4.0 CC
3.8
3.8
3.8
4.7
4.7
4.7
6.0
6.0
6.0
6.0
8.0
mm
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
mm
67.4
92.4
117
141
171
191
188
218
238
288
284
12.1
14.3
18.3
20.9
19.1
18.1
18.8
17.5
21.6
19.5
20.3
mm
mm
d - 2t
Coord.
of
Centroid
xL
Depth
Between
Flanges
541
712
921
1340
1480
1580
1970
2150
2450
2750
0.457
1.08
2.25
4.67
7.16
9.18
11.2
15.7
21.9
34.0
44.2
mm2
3630
Ix
106mm4
Full
Area of
Section
Af
12.2
21.7
36.1
62.3
79.5
91.8
112
137
176
227
294
103mm3
Zx
14.4
25.4
41.8
72.5
93.7
109
135
166
210
275
359
103mm3
Sx
About x-axis
ri
d 2t
29.1
39.0
49.5
59.0
69.5
76.4
75.5
85.5
94.6
111
110
mm
rx
0.0840
0.174
0.388
0.743
0.787
0.812
1.00
1.05
1.79
1.89
2.44
106mm4
Iy
3.01
4.86
8.32
13.7
14.1
14.3
17.9
18.2
26.2
26.8
35.0
103mm3
ZyR
Section Properties
bf
1. Steel grade C450L0 / C400L0 (for t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy = 400 MPa and fu = 450 MPa).
2. Full section properties are calculated in accordance with AS/NZS 4600.
Notes:
16.9
15.5
19.2
250 x 90 x 6.0 CC
200 x 75 x 6.0 CC
21.6
6.0 CC
230 x 75 x 6.0 CC
28.5
300 x 90 x 8.0 CC
mm
mm
Actual
Thickness
t
Inside
Corner
Radius
ri
6.93
12.2
21.2
35.6
41.2
44.9
53.4
59.8
83.3
96.6
120
103mm3
ZyL
About y-axis
xL
Sy
5.46
8.78
15.1
24.8
25.1
25.3
31.8
32.2
46.4
47.1
62.1
103mm3
12.5
15.6
20.5
23.5
23.1
22.7
22.6
22.0
27.1
26.2
25.9
mm
ry
duragal
CHANNELS
mm
Mass
per
metre
Designation
Nominal
Thickd
bf ness
Dimensions
x- and y-axes
Dimensions and Full Section Properties
Grade C450L0 / C400L0 (TS 100)
DuraGal Channels
DuraGal
Profiles
12.4
11.6
10.5
7.23
5.59
4.25
5.0 CC
180 x 75 x 5.0 CC
150 x 75 x 5.0 CC
125 x 65 x 4.0 CC
100 x 50 x 4.0 CC
75 x 40 x 4.0 CC
3.8
3.8
3.8
4.7
4.7
4.7
6.0
6.0
6.0
6.0
8.0
mm
7.8
7.8
7.8
8.7
8.7
8.7
14.0
14.0
14.0
14.0
16.0
mm
Outside
Actual
Corner
Thickness Radius
t
ro
67.4
92.4
117
141
171
191
188
218
238
288
284
mm
d - 2t
Depth
Between
Flanges
15.6
22.2
28.8
28.2
34.6
38.9
28.7
33.7
37.0
45.3
33.5
(d-2ro)
t
8.47
11.1
15.1
14.1
14.1
14.1
10.2
10.2
12.7
12.7
9.25
(b-ro)
t
1.00
1.00
0.966
0.977
0.863
0.797
0.968
0.879
0.825
0.712
1.00
0.875
0.705
0.741
0.741
0.741
0.925
0.925
0.801
0.801
1.00
(b-ro)
(d-2ro)
0.915
be
de
Ratios
1.00
0.944
0.845
0.869
0.820
0.787
0.955
0.906
0.831
0.763
0.950
Af
Ae
450
450
450
450
450
450
450
450
450
450
400
MPa
fy
Yield
Stress
Grade
541
672
779
1160
1220
1240
1880
1950
2040
2100
3450
mm2
Effective
Area of
Section
Ae
bf
ro
Zex
IeyR
ZeyR
IeyL
About y-axis
ZeyL
0.457
1.04
2.00
4.22
6.50
8.37
11.0
15.4
20.5
32.0
44.2
12.2
20.1
29.8
52.9
68.4
79.5
108
132
158
206
294
0.0840
0.164
0.256
0.532
0.550
0.560
1.00
1.05
1.41
1.46
2.44
3.01
4.67
6.24
10.9
11.0
11.0
17.9
18.2
22.2
22.4
35.0
0.0840
0.174
0.388
0.743
0.787
0.812
1.00
1.05
1.79
1.89
2.44
3.01
4.86
8.32
13.7
14.1
14.3
17.9
18.2
26.2
26.8
35.0
Iex
About x-axis
d 2t
1. Steel grade C450L0 / C400L0 (for t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy = 400 MPa and fu = 450 MPa).
2. de and be are the effective widths of the web and flange respectively.
3. de, be and Ae are calculated for sections with uniform axial compressive stress fy.
4. IeyL and ZeyL are for compression at point L; IeyR and ZeyR are for compression at point R;
2. Effective section properties are calculated in accordance with AS/NZS 4600.
Notes:
16.9
15.5
19.2
250 x 90 x 6.0 CC
200 x 75 x 6.0 CC
21.6
230 x 75 x 6.0 CC
28.5
kg/m
6.0 CC
mm mm
mm
Mass
per
metre
Dimensions
300 x 90 x 8.0 CC
Nominal
Thickbf ness
Designation
x- and y-axes
Effective Section Properties
Grade C450L0 / C400L0 (TS 100)
DuraGal Channels
DuraGal
Profiles
duragal
CHANNELS
29
30
kg/m
28.5
21.6
19.2
16.9
15.5
12.4
11.6
10.5
7.23
5.59
4.25
mm mm mm
300 x 90 x 8.0 CC
6.0 CC
250 x 90 x 6.0 CC
230 x 75 x 6.0 CC
200 x 75 x 6.0 CC
5.0 CC
180 x 75 x 5.0 CC
150 x 75 x 5.0 CC
125 x 65 x 4.0 CC
100 x 50 x 4.0 CC
75 x 40 x 4.0 CC
2.60
3.43
4.43
9.87
10.9
11.6
23.7
25.8
29.4
33.0
77.4
0.0760
0.285
1.01
2.77
4.29
5.52
6.78
9.48
19.2
29.6
37.7
Iw
109mm6
Warping
Constant
103mm4
Torsion
Constant
24.4
30.1
40.0
45.4
42.4
40.6
40.2
37.8
47.8
44.0
43.4
mm
Coordinate
of
Shear Centre
x0
40.1
51.8
67.0
78.3
84.9
89.7
89.0
96.7
110
123
122
mm
Polar Radius of
Gyration about the
Shear Centre
r01
85.9
113
145
171
197
218
217
254
273
340
338
mm
Monosymmetry
Section
Constants
1. Steel grade C450L0 / C400L0 (for t < 6.0mm fy = 450 MPa and fu = 500 MPa, and for t > 6.0mm fy = 400 MPa and fu = 450 MPa).
2. With the exception of J, properties are calculated assuming a simplified shape where the bends are eliminated and the section is represented by straight mid-lines in
accordance with Clause 2.1.2.1 of AS/NZS 4600.
3. x is zero for channels.
Notes:
Mass
per
metre
Shear Centre
duragal
CHANNELS
Designation
Nominal
Thickness
d bf
x- and y-axes
Section Properties for Member Stability
Grade C450L0 / C400L0 (TS 100)
DuraGal Channels
xo
DuraGal
Profiles
kg/m
mm
4.24
2.77
2.24
2.40
1.94
1.84
1.49
90 x 6.0 CF
75 x 5.0 CF
4.0 CF
65 x 5.0 CF
4.0 CF
55 x 5.0 CF
4.0 CF
4.7
3.8
4.7
3.8
4.7
3.8
6.0
400
400
400
400
400
400
400
400
350
400
400
400
4.7
8.0
6.0
4.7
3.8
350
400
400
350
400
400
350
400
350
400
MPa
fy
Yield
Stress
Grade
235
190
306
247
353
285
0.196
0.158
0.430
0.348
0.661
0.534
1.46
0.0490
0.0396
0.108
0.0870
0.165
0.134
0.365
1.96
1.58
3.31
2.68
4.41
3.56
8.10
2.94
2.38
4.96
4.01
6.61
5.34
12.2
14.4
14.4
18.8
18.8
21.7
21.7
26.0
0.000433
0.000229
0.000562
0.000297
0.000649
0.000343
0.00162
0.00427
0.00180
0.000865
0.000457
28.9
28.9
28.9
28.9
20.0
15.0
11.8
9.50
13.3
10.0
7.83
6.33
540
0.00112
37.5
19.9
13.2
Sy
0.184
0.120
0.239
0.156
0.276
0.181
0.276
0.181
0.359
0.235
0.414
0.271
0.810
1.60
0.900
0.552
0.361
0.540
0.718
1.07
0.600
0.368
0.241
2.40
1.35
0.828
3.20
1.80
1.10
4.00
1.38
4.80
1.66
103mm3
0.479
1.60
0.900
0.552
0.00640
0.00270
0.00130
0.860
2.13
1.20
0.736
2.67
0.920
3.20
1.10
103mm3
Zy
About y-axis
0.00853
0.00360
0.00173
0.0107
0.00216
0.0128
0.00260
0.667
0.500
0.392
0.317
43.3
43.3
43.3
45.0
33.8
26.4
Iy
106mm4
3.44
57.7
57.7
57.7
72.2
72.2
86.6
86.6
80.0
60.0
47.0
125
73.4
180
106
rx
mm
2.67
2.00
1.57
1.27
30.0
22.5
17.6
Sx
103mm3
611
2.25
1.69
1.32
9.00
6.75
5.29
1200
900
705
53.3
40.0
31.3
83.3
49.0
120
70.5
103mm3
Zx
About x-axis
800
600
470
380
5.33
4.00
3.13
10.4
6.12
18.0
10.6
21.3
16.0
12.5
41.7
24.5
Ix
106mm4
1600
1200
940
2000
1180
72.0
42.3
106mm4
mm2
2400
1410
About
1-axis
I1
Full
Area of
Section
Af
Section Properties
Notes:
1. Steel grade C400L0 / C350L0 (for t < 6.0mm fy = 400 MPa and fu = 450 MPa, and for t > 6.0mm fy = 350 MPa and fu = 400 MPa).
2. Section properties are calculated in accordance with AS/NZS 4600.
4.80
6.28
4.71
3.69
2.98
100 x 8.0 CF
6.0 CF
5.0 CF
4.0 CF
9.42
7.07
5.53
150 x 8.0 CF
6.0 CF
5.0 CF
130 x 5.0 CF
8.0
6.0
4.7
12.6
9.42
7.38
200 x 8.0 CF
6.0 CF
5.0 CF
8.0
6.0
4.7
8.0
4.7
15.7
9.22
250 x 8.0 CF
5.0 CF
8.0
4.7
18.8
11.1
mm
Actual
Thickness
t
300 x 8.0 CF
5.0 CF
mm
Mass
per
metre
Designation
Nominal
Width Thickness
w
Dimensions
DuraGal Flats
ry
1.36
1.10
1.36
1.10
1.36
1.10
1.73
1.73
0.915
2.25
1.19
2.60
1.37
6.48
4.50
17.1
7.20
3.46
1.83
2.31
1.73
1.36
1.10
25.6
10.8
5.19
2.31
1.73
1.36
1.36
34.1
14.4
6.92
42.7
8.65
51.2
10.4
103mm4
2.31
1.73
1.36
2.31
1.36
2.31
1.36
mm
Torsion
Constant
DuraGal
Profiles
duragal
flats
31
plate
products
32
0.18
0.22
0.55
Si
1.50
1.70
0.040
0.050
0.040
Chemical Composition %
Mn
0.040
0.040
0.040
0.040
0.035
0.040
0.050
0.035
0.45
0.48
CE
0.40
0.44
CE
355 MPa
400 MPa
350 MPa
Yield
Strength
275 MPa
245 MPa
250 MPa
Yield
Strength
0.55
0.22
1.80
0.040
Chemical Composition %
Mn
0.035
0.48
CE
BISPLATE 80
Si
0.20
0.18
1.40
Mn
0.010
Chemical Composition %
0.003
0.50
CE
High strength, low alloy steel plate with a yield stress three times that of carbon steel. Hardness 255HB.
Si
690 MPa
Yield
Strength
450 MPa
Yield
Strength
High strength structural steel plate with a nominal yield strength of 450 MPa. Not suitable for hot forming or normalising.
High Tensile
1.60
0.20
BS EN 10025 S355
0.55
1.60
1.70
0.30
0.55
0.22
Chemical Composition %
Mn
Si
High strength structural steel plate with a nominal yield strength of 350 MPa
Medium Tensile
BS EN 10025 S275
Medium strength structural steel plate with a nominal yield strength of 250 MPa
Mild Steel
22%
22%
490-630 MPa
790-930 MPa
Tensile
Strength
520 MPa
18%
Min
Elongation
16%
Min
Elongation
13%
540 MPa
Tensile
Strength
20%
450 MPa
Min
Elongation
17%
410-560 MPa
Tensile
Strength
22%
410 MPa
Min
Elongation
400-510 MPa
Tensile
Strength
The chemical compositions are all the maximum % content. The mechanical properties relate to 12-20mm thick plates. This data is for comparison
purposes only and should not be used in lieu of the actual specifications, which should always be consulted.
There are a variety of international specifications for hot rolled steel plate. Some of the more common specifications and grades, with their chemical and
mechanical properties, are summarised below.
Plate
Plate
0.22
0.29
0.55
1.40
Mn
0.015
0.010
Chemical Composition %
0.19
0.150
0.150
0.70
0.50
Mn
0.030
0.030
Chemical Composition %
0.50
0.50
Mn
Chemical Composition %
0.030
0.030
0.040
0.035
0.003
0.003
CE
0.39
CE
0.62
0.50
CE
AS1548-7-460R
Si
0.60
0.20
1.70
Mn
0.040
Chemical Composition %
0.030
0.45
CE
Tensile
Strength
480 MPa
450 MPa
Tensile
Strength
1640 MPa
1350 MPa
Tensile
Strength
22%
Min
Elongation
0.15 to 0.50%
0.25 to 0.60%
15%
250 MPa
295 MPa
Yield
Strength
460 MPa
Tensile
Strength
350 MPa
Copper
477-534HB
Min
Elongation
360-440HB
10%
Hardness
12%
Min
Elongation
21%
Min
Elongation
Yield
Strength
345 MPa
340 MPa
Yield
Strength
Yield
Strength
A carbon-manganese steel for boiler and pressure vessel applications with a minimum tensile strength of 460 MPa.
Boiler Plate
0.03
0.10
Si
0.75
0.12
Floor Plate
0.50
0.11
Si
Corrosion Resistant
0.20
0.18
BISPLATE 500
Si
BISPLATE 400
Through hardened, abrasion resistant steel plate, offering long life expectancy in high impact abrasion applications.
Plate
plate
products
33
34
0.80
1.00
1.20
1.60
2.00
2.50
3.00
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
160 - 240
290 -365
34
40-60
Tensile (MPa)
% Elongation*
HRB Hardness
* Lo = 50mm
Specified - Minimum
Phosphorus
Sulphur
Manganese
Silicon
Carbon
Element
0.025
0.030
0.254
0.030
0.080
Maximum
Chemical Composition %
Longitudinal tensile
Mechanical Properties
0.60
Thickness
2438 x 1219
Size
Typical Dimensions
Surface
Finish:
0.80
1.00
1.20
1.60
2.00
2.50
3.00
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
0.050
0.050
Sulphur
Phosphorus
270
34-39
Tensile (MPa)
% Elongation
HRB Hardness
SECC
SEHC
29-31
270
Specified - Minimum
0.045
0.040
0.50
0.60
Maximum
SPHC
SPCC
0.15
0.12
Manganese
Silicon
Carbon
Element
Chemical Composition %
Longitudinal tensile
Mechanical Properties
Hot rolled
SEHC 1.6mm
and above
typically
JIS G 3131
specified
base metal
Cold rolled
SECC
0.4-1.2mm
typically
JIS G 3141
specified
base metal
0.60
Thickness
2438 x 1219
Size
Typical Dimensions
Surface
Finish:
COIL
products
Summarised below are New Zealand and International standards for our
common stock items. This data is for comparison purposes only and
should not be used in lieu of the actual specifications, which should
always be consulted.
Coil
Coil
1.0
1.2
1.6
3.0
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
HRB Hardness
36 - 40
% Elongation
Tensile (MPa)
Specified - Minimum
Phosphorus
Sulphur
Manganese
Silicon
Carbon
Element
0.04
0.04
0.50
0.008
Maximum
Chemical Composition %
Longitudinal tensile
Mechanical Properties
0.8
Thickness
2438 x 1219
Size
Typical Dimensions
porcelain enamelling
Finish:
0.75
0.95
2400 x 1200
2400 x 1200
0.03
0.04
Sulphur
Phosphorus
300
340
20
Tensile (MPa)
% Elongation*
HRB Hardness
Note: not specified in the standard.
* Lo = 50mm
Specified - Minimum
1.60
0.30
Maximum
Manganese
Silicon
Carbon
Element
Chemical Composition %
Longitudinal tensile
Mechanical Properties
0.55
Thickness
2400 x 1200
Size
Typical Dimensions
Finish:
Surface
Description: Hot rolled and hot dipped alloy coated steel sheet with
45% zinc/55% aluminium
Surface
Coil
COIL
products
35
36
0.035
0.03
Sulphur
Phosphorus
0.95
0.40
0.55
0.75
0.95
1.15
1.55
2.00
2.50
3.00
3.00
0.55
0.75
0.95
0.55
2400 x 900
2400 x 1200
2400 x 1200
2400 x 1200
2400 x 1200
2400 x 1200
2400 x 1200
2400 x 1200
2400 x 1200
2400 x 1200
3000 x 1200
3000 x 1500
3000 x 1500
3000 x 1500
3660 x 1200
250
320
25
Tensile (MPa)
% Elongation*
HRB Hardness
* Lo = 50mm
Specified - Minimum
Longitudinal tensile
Mechanical Properties
0.50
Manganese
0.75
2400 x 900
0.12
Silicon
0.55
Carbon
0.40
Maximum
Element
2400 x 900
Thickness
Chemical Composition %
2400 x 900
Size
Typical Dimensions
Relevant
standard:
2.50
2438 x 1219
350
22*
% Elongation
HRB Hardness
Note: not specified in the standard.
* Lo = 50mm
250
Tensile (MPa)
HA250
Specified - Minimum
elements
0.01 (Note 2)
0.04
Micro-alloying
0.10
(Note 1)
Copper
Titanium
(Note 1)
Nickel
Aluminium
0.04
(Note 1)
Chromium
0.03
Sulphur
Phosphorus
0.35
1.20
Manganese
0.20
Maximum
Silicon
Carbon
Element
Chemical Composition %
Longitudinal tensile
Mechanical Properties
Note:
2.00
Thickness
2438 x 1219
Size
Typical Dimensions
Surface
Finish:
COIL
products
Surface
Finish:
Coil
0.8
1.0
1.2
1.6
2438 x 1219
2438 x 1219
2438 x 1219
2438 x 1219
Tensile (MPa)
% Elongation
HRB Hardness
Specified - Minimum
Phosphorus
Sulphur
Manganese
Silicon
Carbon
Element
0.35
0.04
0.60
0.15
Maximum
Chemical Composition %
Longitudinal tensile
Mechanical Properties
0.6
Thickness
2438 x 1219
Size
Typical Dimensions
Surface
Finish:
Coil
COIL
products
37
38
Sheet
inches
inches
0.380
0.340
0.300
0.284
0.259
0.238
0.220
0.203
0.180
0.165
0.148
0.134
0.1250
0.1113
0.0991
0.0882
0.0785
0.0699
0.0625
0.0556
2/0
10
11
12
13
14
15
16
17
1.412
1.588
1.775
1.994
2.240
2.517
0.058
0.065
0.072
0.083
0.095
0.109
0.120
0.425
3/0
2.827
0.454
4/0
1.473
1.651
1.829
2.108
2.413
2.769
3.048
3.404
3.759
4.191
4.572
5.156
5.588
6.045
6.579
7.214
7.620
8.636
9.652
10.795
0.056
0.064
0.072
0.080
0.092
0.104
0.116
0.128
0.144
0.160
0.176
0.192
0.212
0.232
0.252
0.276
0.300
0.324
0.348
0.372
0.400
0.432
11.532
0.464
0.5
5/0
12.700
mm
1.422
1.626
1.829
2.032
2.337
2.642
2.946
3.251
3.658
4.064
4.470
4.877
5.385
5.893
6.401
7.010
7.620
8.230
8.839
9.449
10.160
10.973
11.786
12.700
mm
Wire
6/0
3.175
mm
Birmingham Gauge
0.5
inches
Birmingham Gauge
Sheet
0.0139
0.0123
30
0.0156
0.0175
0.0196
0.0220
0.0248
0.0278
0.0313
0.0349
0.0392
0.0440
0.0495
inches
0.312
0.353
0.397
0.443
0.498
0.560
0.629
0.707
0.794
0.886
0.996
1.118
1.257
mm
Birmingham Gauge
29
28
27
26
25
24
23
22
21
20
19
18
Gauge
Number
0.0120
0.0131
0.014
0.016
0.018
0.020
0.022
0.025
0.030
0.032
0.035
0.042
0.049
inches
0.305
0.333
0.356
0.406
0.457
0.508
0.559
0.635
0.762
0.813
0.889
1.067
1.245
mm
Birmingham Gauge
0.0124
0.0136
0.0148
0.0164
0.018
0.020
0.022
0.024
0.028
0.032
0.036
0.040
0.048
inches
0.315
0.345
0.376
0.417
0.457
0.508
0.559
0.610
0.711
0.813
0.914
1.016
1.219
mm
Wire
COIL
products
7/0
Gauge
Number
Coil
0.49
Seismic 500E QT
0.22
0.22
0.05
0.05
0.05
Sulphur
& Phos.
%
max.
D10
D12
D16
D20
D25
D28
D32
D40
Deformed
6
10
12
16
20
25
28
32
40
Seismic 500E MA
500-600
500-600
300-380
Yield
Strength
MPa*
min.
28.3
78.5
113.0
201.0
314.0
491.0
616.0
804.0
1260.0
Area
mm2
1.15
1.15
1.15
0.222
0.617
0.888
1.578
2.466
3.85
4.834
6.313
9.865
Mass
kg/m
1.40 10 (uniform)
1.40 10 (uniform)
Seismic 500E QT
18.8
31.4
37.7
50.3
62.8
78.5
88.0
101.0
126.0
min.
Elongation
%*
1.50 15 (uniform)
Tensile
Strength
Ratio*
min.
max.
Perimeter
mm
Normal Dimensions
Diameter
mm
R6
R10
R12
R16
R20
R25
Plain
Bar Designation
* Characteristic values
0.49
Seismic 500E MA
0.22
max.
max.
0.43
Carbon
%
Carbon
Equiv.
300
Steel
Grade
Not recommended
Not advised
loss of strength
disproportional to loss
of area
Yes long term quality
assured
CERTIFIED
Yes- long term quality
TO
assured
AS/NZS 4671
Not recommended
Seismic 500E QT
WELDING
REBENDING
Seismic 500E MA
Handling Characteristics
Manufacturing process
Pacific Steel, New Zealands only producer of hot rolled Reinforcing Steel has a reinforcing bar range which complies with the standard AS/NZS
4671: 2001 Steel Reinforcing Material. There are two grades of steel reinforcing bars designated as Seismic 300 and Seismic 500. Pacific Steel
manufactures a Seismic 500E bar through two different manufacturing methods.
Reinforcing
RB
REINFORCING
BAR
39
40
0.774
0.779
0.561
0.574
0.579
0.583
0.431
0.436
0.461
0.474
0.479
0.483
32.7
26.3
22.1
15.1
26.4
22.2
32.5
26.2
22.0
14.9
26.0
21.8
14.7
m2/t
per t
23.0
18.0
14.7
9.11
13.2
10.7
23.0
18.0
14.7
9.11
28.0
23.0
14.7
b-2t
35.5
28.0
23.0
14.7
28.5
23.4
48.0
38.0
31.3
20.2
48.0
39.7
25.8
1880
2310
2730
3900
2100
2480
2280
2810
3330
4800
3810
4530
6600
mm2
Ag
Gross
Section
d-2t Area
Zx
Sx
About x-axis
rx
5.87
7.07
147
179
210
293
317
374
533
145
78.2
55.3
54.7
52.9
53.7
53.0
72.1
71.5
70.8
68.9
92.6
92.0
90.2
Sy
3.15
3.79
4.36
5.77
2.06
2.35
4.07
4.92
5.69
7.64
15.0
17.5
24.3
130
180
224
264
375
140
62.0
71.9
91.0
63.0
75.7
71.8
87.3
87.3 102
115
54.0
61.7
81.5
98.3 111
114
153
199
233
324
Zy
About y-axis
5.18
40.9
40.4
40.0
6.64 105
8.12 127
9.51 147
197
94.9
6.03 109
38.5 13.2
31.3
30.8
172
200
272
337
395
554
9.89 142
41.8 12.1
41.3 14.2
39.9 19.9
62.6 33.0
62.2 39.0
42.3
106mm4 103mm3
60.7 56.0
mm
ry
17.4
17.4
10.8
21.3
17.4
10.8
15.7
12.7
0.971 27.2
1.00
1.00
1.00
1.00
1.00
0.801 27.2
0.925 21.3
1.00
1.00
0.814 33.1
0.907 27.2
1.00
kf
94.6
115
134
185
100
117
147
179
210
293
300
374
533
About x-axis
lex CompactZ
ness(3) ex
(C,N,S) 103mm3
42.0
33.1
27.2
17.4
33.7
27.7
56.8
45.0
37.1
23.9
56.8
46.9
30.5
60.9
83.6
102
140
59.0
71.9
63.1
90.1
119
180
156
208
373
About y-axis
ley CompactZey
ness(3)
(C,N,S) 103mm3
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1
for AS 1163 grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
94.6 55.9
94.3 115
134
185
79.5 100
91.4 117
119
144
167
228
262
307
430
8.17 109
10.9
6.06
6.97
11.9
14.4
16.7
22.8
32.7
38.4
53.7
Iy
Properties
Ix
F These items are not commonly stocked but are available on request.
m2/m
0.761
kg/m
per m
External
Surface Area
mm mm mm
Mass
per
metre
RECTANGULAR
HOLLOW
SECTIONS
Designation
RHS
0.379
0.383
0.383
43.5
32.9
26.6
22.4
37.6
26.7
22.5
64.7
52.0
43.5
23.0
16.8
13.0
10.5
12.6
8.20
6.50
23.0
18.0
14.7
10.5
8.00
6.33
b-2t
39.7
29.3
23.0
18.8
34.3
23.4
19.2
73.0
58.0
48.0
35.5
28.0
23.0
Ix
Zx
Sx
About x-axis
rx
1140
1480
1810
2130
1155
1594
1868
774
959
1140
1480
1810
2130
2.43
3.05
3.64
4.16
2.20
2.89
3.28
2.08
2.54
2.99
3.74
4.44
5.06
38.9
48.9
58.3
66.6
34.7
45.6
51.6
27.7
33.9
39.8
49.8
59.2
67.5
Sy
1.11
1.39
1.65
1.87
0.526
0.679
0.761
0.372
0.452
0.526
0.653
0.765
0.860
29.5
37.0
43.9
50.0
20.6
26.6
29.8
14.9
18.1
21.1
26.1
30.6
34.4
33.3
42.4
51.1
59.1
23.4
31.3
35.8
16.3
19.9
23.5
29.8
35.7
40.9
Zy
About y-axis
31.1
30.6
30.1
29.6
21.3
20.6
20.2
21.9
21.7
21.5
21.0
20.5
20.1
mm
ry
2.43
3.16
3.83
4.44
1.44
1.93
2.20
1.04
1.28
1.50
1.93
2.30
2.63
49.5
63.0
75.3
86.2
37.2
48.6
54.9
26.9
32.8
38.3
48.2
56.8
64.3
106mm4 103mm3
9.47
7.49
11.0
8.72
19.8
15.4
12.4
0.908 27.2
1.00
1.00
1.00
0.905 16.9
1.00
1.00
0.595 27.2
0.685 21.3
0.776 17.4
0.963 12.4
1.00
1.00
kf
47.3
60.3
72.7
84.2
44.6
59.9
68.9
34.3
43.5
51.4
65.4
78.9
91.2
About x-axis
lex CompactZ
ness(3) ex
(C,N,S) 103mm3
46.9
34.6
27.2
22.3
46.0
31.4
25.7
86.4
68.6
56.8
42.0
33.1
27.2
26.3
39.9
51.1
59.1
18.5
30.6
35.8
8.32
11.9
16.0
25.1
34.1
40.9
About y-axis
ley CompactZey
ness(3)
(C,N,S) 103mm3
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1
for AS 1163 grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
47.3 46.1
60.3 45.4
72.7 44.8
84.2 44.2
44.6 43.7
59.9 42.6
68.9 41.9
35.3 51.8
43.5 51.5
51.4 51.2
65.4 50.2
78.9 49.5
91.2 48.7
Iy
Properties
Ag
Gross
Section
d-2t Area
F These items are not commonly stocked but are available on request.
8.96 0.390
0.379
3.0 RHS
0.374
9.07 0.341
0.335
3.5 RHS
6.07 0.393
2.0 RHS
0.330
7.53 0.391
2.5 RHS
8.96 0.390
3.0 RHS
32.9
26.6
22.4
m2/t
mm mm mm
m2/m
per t
per m
0.374
External
Surface Area
kg/m
Mass
per
metre
Designation
RHS
RECTANGULAR
HOLLOW
SECTIONS
41
42
Zx
Sx
rx
Zy
Sy
43.9
29.8
27.7
24.4
20.6
15.0
21.1
C
N
C
C
C
N
C
24.7
36.4
17.4
21.3
27.2
37.1
12.4
53.7
39.9
45.3
39.8
33.4
26.7
28.1
C
C
C
C
C
C
C
17.7
26.4
7.49
9.47
12.4
17.4
7.49
1.00
1.00
1.00
1.00
1.00
1.00
1.00
61.2
46.1
40.9
36.5
31.2
25.0
29.3
2.14
1.53
1.35
1.13
0.886
1.01
30.5
19.2
19.7
20.2
20.7
18.5
32.6
27.7
24.4
20.6
16.4
21.1
28.2
22.7
20.4
17.6
14.4
16.9
38.2 1.07
33.4 0.567
34.1 0.511
34.8 0.441
35.6 0.361
25.5 0.421
39.9
45.3
39.8
33.4
26.7
28.1
33.0
34.2
30.6
26.1
21.3
21.3
1155 1.68
1530 1.71
1310 1.53
1080 1.31
841 1.06
1230 0.800
27.1
6.33 14.7
8.00 18.0
23.0
31.3
19.7
10.5
14.7
6.33 10.5
0.341 37.6
0.274 22.8
0.279 27.0
0.283 33.3
0.290 43.9
0.224 23.2
9.07
8.49
6.60
9.67
4.0 RHS
3.0 RHS
16.0
12.9
C
C
19.8
27.2
21.1
17.1
C
C
17.4
1.00
1.00
22.7
18.4
0.754
0.593
19.5
20.0
16.0
12.9
13.4
11.1
26.7 0.335
27.5 0.278
21.1
17.1
16.8
13.9
881 0.630
691 0.522
16.8
23.0
14.7
0.233 33.7
0.240 44.2
6.92
5.42
4.0 RHS
3.0 RHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for AS 1163
grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
v Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450MPa ( fu = 450 MPa), a minimum tensile strength of 500 MPa ( fy = 500 MPa) and a minimum
elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
s Available Dualgrade 350L0/450L0 - please refer to page 44 DuraGal Rectangular Hollow Sections for the Properties for Design to AS 4100.
18.8
C
15.4
24.9
C
9.47
12.4
1.00
26.4
0.891
19.0
18.8
15.4
26.1 0.384
24.9
19.4
1060 0.726
8.00 13.0
10.5
0.229 27.4
8.35
s 75 x 50 x 6.0 RHS
5.0 RHS
s
3.5 RHS
50.5
C
20.1
61.9
C
14.3
1.00
69.8
2.91
29.7
43.9
37.0
37.3 1.41
53.7
43.5
1594 2.22
18.4
13.2
0.335 26.7
About y-axis
ley CompactZey
ness(3)
(C,N,S) 103mm3
3.38
About x-axis
lex CompactZex
ness(3)
(C,N,S) 103mm3
29.2
kf
50.5
106mm4 103mm3
42.0
mm
ry
36.7 1.59
Iy
61.9
Ix
About y-axis
49.4
mm2
Ag
About x-axis
1868 2.52
Gross
Section
d-2t Area
15.0
m2/t
m2/m
b-2t
10.7
per t
per m
External
Surface Area
0.330 22.5
kg/m
Mass
per
metre
mm mm mm
Designation
Properties
RECTANGULAR
HOLLOW
SECTIONS
RHS
6.24
6.70
8.58
7.11
6.13
3.56
3.12
2.62
N
C
C
C
C
C
C
30.86
37.57
16.9
23.3
28.4
17.4
21.3
27.2
14.94
12.79
13.3
11.0
9.45
5.86
5.11
4.26
C
C
C
C
C
C
C
C
15.21
18.78
7.99
11.4
14.2
7.49
9.47
12.4
1.00
1.00
1.00
1.00
14.3
12.4
12.5
10.4
9.10 1.00
5.18 1.00
4.60 1.00
3.92 1.00
0.344
0.320
0.259
0.223
8.58 13.4
7.11 14.0
6.13 14.2
9.69 0.0964
9.91 0.0843
0.0706
8.25 16.4
3.56
3.12
2.62 10.1
7.18
7.03
6.04
5.29
2.93
2.62
2.25
13.3
8.65 11.0
9.45 23.1 0.0926
5.86 16.9 0.0367
5.11 17.2 0.0328
4.26 17.5 0.0281
10.1
7.52
4.47
3.95
3.35
534 0.38
681 0.328
541 0.281
459 0.244
391 0.112
334 0.0989
274 0.0838
6.33 14.7
8.00 18.0
23.0
12.0
0.183 34.2
0.190 44.7
0.191 53.1
0.140 45.5
0.141 54.0
0.143 66.6
4.19
5.35
4.25
3.60
3.07
2.62
2.15
2.5 RHS
s 65 x 35 x 4.0 RHS
3.0 RHS
2.5 RHS
2.0 RHS
s 50 x 25 x 3.0 RHS
2.5 RHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for AS 1163
grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
v Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450MPa ( fy = 450 MPa), a minimum tensile strength of 500 MPa ( fu = 500 MPa) and a minimum
elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
s Available Dualgrade 350L0/450L0 - please refer to page 44 DuraGal Rectangular Hollow Sections for the Properties for Design to AS 4100.
10.5
11.84
C
N
22.47
18.37
C
10.73
1.00
17.4
0.402
9.62 16.2
8.25
631 0.44
About y-axis
ley CompactZey
ness(3)
(C,N,S) 103mm3
About x-axis
lex CompactZex
ness(3)
(C,N,S) 103mm3
kf
4.95
106mm4 103mm3
3.0 RHS
mm
ry
Sy
0.504
Zy
About y-axis
106mm4 103mm3 103mm3
Iy
rx
Sx
Zx
About x-axis
801 0.53
mm2
Ix
8.00 16.8
m2/t
Ag
m2/m
0.213 33.85
b-2t
Properties
6.29
per t
per m
Gross
Section
d-2t Area
kg/m
External
Surface Area
mm mm mm
Mass
per
metre
s 75 x 40 x 4.0 RHS
Designation
RHS
RECTANGULAR
HOLLOW
SECTIONS
43
44
3.0 RHS
2.5 RHS
2.0 RHS
774
2.08
2.54
60.5
48.0
774
959
1.69
2.07
73.0
959
Zx
Sx
27.0
33.0
38.9
48.9
58.3
66.6
27.7
33.9
39.8
49.8
59.2
67.5
32.5
40.0
47.3
60.3
72.7
84.2
35.3
43.5
51.4
65.4
78.9
91.2
Ix
About x-axis
46.7
46.4
46.1
45.4
44.8
44.2
51.8
51.5
51.2
50.2
49.5
48.7
mm
rx
Zy
Sy
29.5
37.0
43.9
50.0
0.771 20.6
0.942 25.1
1.11
1.39
1.65
1.87
0.372 14.9
0.452 18.1
0.526 21.1
0.653 26.1
0.765 30.6
0.860 34.4
22.9
28.2
33.3
42.4
51.1
59.1
16.3
19.9
23.5
29.8
35.7
40.9
Iy
About y-axis
31.6
31.4
31.1
30.6
30.1
29.6
21.9
21.7
21.5
21.0
20.5
20.1
mm
ry
1.67
2.05
2.43
3.16
3.83
4.44
1.04
1.28
1.50
1.93
2.30
2.63
10.7
8.50
22.5
17.4
14.1
0.624 47.6
0.763 37.6
0.845 30.9
1.00
1.00
1.00
0.553 30.9
0.633 24.1
0.713 19.7
24.8
34.7
46.5
60.3
72.7
84.2
31.6
43.5
51.4
65.4
78.9
91.2
About x-axis
lex CompactZ
ness(3) ex
(C,N,S)103mm3
0.877 14.1
1.00
1.00
kf
81.2
64.4
53.2
39.2
30.9
25.3
97.9
77.8
64.4
47.6
37.6
30.9
13.0
18.2
24.2
37.4
50.5
59.1
7.64
10.9
14.5
22.7
31.8
40.4
About y-axis
ley CompactZ
ness(3) ey
(C,N,S) 103mm3
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 450 MPa and design tensile strength fu = 500 MPa as per AS 4100 table 2.1 for
AS 1163 grade C450L0.
2. Grade C450L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
5. DuraGal Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450MPa (fy = 450MPa), a minimum tensile strength of 500MPa (fu = 500 MPa)
and a minimum elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
34.4
42.1
49.5
63.0
75.3
86.2
26.9
32.8
38.3
48.2
56.8
64.3
106mm4 103mm3
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
mm2
Ag
Gross
Section
Area
d-2t
0.379 26.6
m2/t
m2/m
b-2t
per t
per m
External
Surface Area
0.374 22.4
kg/m
Mass
per
metre
mm mm mm
Designation
Properties
RECTANGULAR
HOLLOW
SECTIONS
DuraGal
RHS
t
t
mm2
Ag
Gross
Section
d-2t Area
3.0 RHS
2.5 RHS
2.0 RHS
1.6 RHS
60.5
48.0
38.0
31.3
26.6
463
574
709
841
959
21.3
23.6
26.1
30.6
34.2
0.613 12.3
0.750 15.0
0.912 18.2
1.06
1.18
3.5 RHS
Zx
Sx
About x-axis
15.0
18.5
22.7
26.7
29.9
33.4
39.8
45.3
Ix
0.279 27.0
b-2t
4.0 RHS
0.274 22.8
m2/t
m2/m
per t
per m
External
Surface Area
kg/m
Mass
per
metre
36.4
36.2
35.9
35.6
35.1
34.8
34.1
33.4
mm
rx
Zy
Sy
About y-axis
0.211
8.43
0.257 10.3
0.311 12.4
0.361 14.4
0.400 16.0
0.441 17.6
0.511 20.4
0.567 22.7
21.2
20.9
20.7
20.4
20.2
19.7
19.2
mm
ry
9.33 21.3
11.5
14.0
16.4
18.5
20.6
24.4
27.7
Iy
Properties
28.2
31.2
36.5
40.9
0.501 14.5
0.616 17.7
0.754 21.5
0.886 25.0
1.01
1.13
1.35
1.53
106mm4 103mm3
8.50
16.5
14.1
10.7
12.5
18.2
22.7
26.7
29.9
33.4
39.8
45.3
81.2
64.4
51.0
42.0
35.6
30.9
24.1
19.7
5.19
7.33
10.4
13.9
17.1
20.3
24.4
27.7
About y-axis
ley CompactZ
ness(3) ey
(C,N,S) 103mm3
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 450 MPa and design tensile strength fu = 500 MPa as per AS 4100 table 2.1 for
AS 1163 grade C450L0.
2. Grade C450L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
5. DuraGal Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450MPa (fy = 450MPa), a minimum tensile strength of 500MPa (fu = 500 MPa)
and a minimum elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
0.661 39.2
0.746 30.9
0.856 24.1
0.967 19.7
1.00
1.00
1.00
1.00
kf
About x-axis
lex CompactZ
ness(3) ex
(C,N,S)103mm3
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
mm mm mm
Designation
DuraGal
RHS
RECTANGULAR
HOLLOW
SECTIONS
45
46
b-2t
per t
m2/t
per m
kg/m m2/m
mm mm mm
Zx
Sx
About x-axis
Zy
Sy
About y-axis
C
16.0
12.8
9.95
7.07
5.01
C
N
N
S
S
22.5
30.9
37.6
47.6
21.1
17.1
14.6
11.8
8.26 60.2
C
C
C
N
N
14.1
19.7
24.1
1.00
1.00
1.00
0.904 30.9
0.799 39.2
22.7
18.4
15.9
13.1
10.8
0.754
0.593
0.505
0.414
0.337
19.5
20.0
20.3
16.0
12.9
7.40 20.7
11.1
9.60 11.0
9.06 20.5
13.4
7.96
6.56
0.335
0.278
0.240
0.199
0.164
26.7
27.5
27.7
28.0
21.1
17.1
14.6
13.9
12.0
9.91 12.0
9.75 28.2
16.8
8.14
7.60 10.1
881 0.630
691 0.522
584 0.450
474 0.372
383 0.305
16.8
23.0
28.0
35.5
44.9
10.5
14.7
18.0
23.0
29.3
4.05
2.88
2.02
N
S
S
37.6
10.1
8.31 47.6
6.81 60.2
C
C
C
10.7
1.00
0.878 14.1
0.746 18.3
7.14
6.04
5.05
0.144
0.120
0.0993
4.53 10.3
3.77 10.5
3.11 10.7
3.89
3.31
2.78
0.0487
0.0414
0.0347
24.9
8.31 25.3
6.81 25.5
6.36
5.26
459 0.285
374 0.238
303 0.197
8.00 28.0
35.5
44.9
10.5
13.6
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 450 MPa and design tensile strength fu = 500 MPa as per AS 4100 table 2.1 for
AS 1163 grade C450L0.
2. Grade C450L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For SHS and RHS the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
5. DuraGal Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450MPa (fy = 450MPa), a minimum tensile strength of 500MPa (fu = 500 MPa)
and a minimum elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
18.8
C
17.4
24.9
C
1.00
26.4
0.891
19.0
18.8
15.4
0.384
26.1
24.9
19.4
1060 0.726
8.00 13.0
21.1
C
14.1
28.1
C
8.50
10.7
1.00
29.3
1.01
About y-axis
ley CompactZey
ness(3)
(C,N,S) 103mm3
18.5
About x-axis
lex CompactZex
ness(3)
(C,N,S) 103mm3
21.1
kf
16.9
106mm4 103mm3
0.421
mm
ry
25.5
Iy
28.1
mm
rx
21.3
Ix
1230 0.800
mm2
Ag
Properties
6.33 10.5
Gross
Section
d-2t Area
Mass
External
per Surface Area
metre
RECTANGULAR
HOLLOW
SECTIONS
Designation
DuraGal
RHS
b-2t
per t
m2/t
kg/m m2/m
mm mm mm
Zx
Sx
About x-axis
Zy
Sy
About y-axis
C
7.11
5.95
4.37
3.56
3.12
2.58
1.92
2.63
2.32
1.93
1.44
C
N
S
C
C
N
N
C
C
N
N
26.4
11.0
9.45 32.2
7.80 40.9
5.86 19.7
5.11 24.1
4.26 30.9
3.53 39.2
5.16 19.7
4.51 24.1
3.78 30.9
3.14 39.2
C
C
C
C
C
C
C
C
C
C
C
16.1
10.7
14.1
18.3
6.26
8.05
10.7
14.1
1.00
0.985 20.8
8.50
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
10.4
9.10
7.62
5.18
4.60
3.92
3.29
3.88
3.49
3.00
2.55
0.223
0.184
9.91 0.0843
0.0585
5.07 14.4
9.69 0.0964
0.0706
6.13 14.2
2.17 10.3
7.89 0.0550
8.11 0.0466
8.29 0.0389
3.12
2.62 10.1
7.67 0.0620
3.56
2.63
2.32
1.96
1.63
5.29
4.44
2.93
2.62
2.25
1.90
2.12
1.92
1.67
1.42
0.0926
0.0778
0.0367
0.0328
0.0281
0.0237
0.0212
0.0192
0.0167
0.0142
9.45 23.1
7.80 23.4
5.86 16.9
5.11 17.2
4.26 17.5
3.53 17.7
5.16 16.2
4.51 16.6
3.78 16.9
3.14 17.1
7.52
6.28
4.47
3.95
3.35
2.81
3.81
3.39
2.89
2.43
459 0.244
374 0.204
391 0.112
334 0.0989
274 0.0838
223 0.0702
361 0.0951
309 0.0848
254 0.0723
207 0.0608
24.0
30.5
8.00 18.0
29.3
10.5
13.6
4.67 14.7
6.00 18.0
8.00 23.0
29.3
15.5
6.33 14.7
23.0
12.0
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 450 MPa and design tensile strength fu = 500 MPa as per AS 4100 table 2.1 for AS
1163 grade C450L0.
2. Grade C450L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For SHS and RHS the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
5. DuraGal Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450MPa (fy = 450MPa), a minimum tensile strength of 500MPa (fu = 500 MPa)
and a minimum elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
10.5
8.58
C
19.1
13.3
C
9.06
13.0
1.00
12.5
0.259
7.11 14.0
6.04
0.106
22.8
8.65 11.0
541 0.281
9.67 19.7
About y-axis
ley CompactZey
ness(3)
(C,N,S) 103mm3
0.320
About x-axis
lex CompactZex
ness(3)
(C,N,S) 103mm3
8.58 13.4
kf
7.03
106mm4 103mm3
0.123
mm
ry
22.0
Iy
13.3
mm
rx
10.1
Ix
681 0.328
mm2
Ag
Properties
6.75 14.3
Gross
Section
d-2t Area
per m
Mass
External
per Surface Area
metre
Designation
DuraGal
RHS
RECTANGULAR
HOLLOW
SECTIONS
47
48
kg/m
Mass
per
metre
16.8
30.5
0.131 54.2
0.135 82.7
204
9.79 189
4.33 298
30.5 13.2
0.145 82.5
276
6.42 322
16.8
47.7 13.2
0.141 54.0
0.195 81.7
mm
Af
6.42 442
27.3
t
4
10 mm
0.0561
0.0824
0.0647
0.0960
0.181
0.276
Ix
3
2.25
3.30
2.59
3.84
4.83
7.37
2.88
4.37
3.23
4.94
6.23
9.72
Sx
3
10 mm 10 mm
3
Zx
About x-axis
17.2
16.6
17.8
17.3
25.6
25.0
mm
rx
4
0.0132
0.0188
0.0219
0.0319
0.0320
1.32
1.88
1.75
2.55
2.56
3.78
Zy
3
1.50
2.25
2.00
3.02
2.85
4.38
Sy
About y-axis
3
10 mm 10 mm 10 mm
0.0473
Iy
0.0911 4.65
6.93
0.0537 3.04
8.35 0.0359 2.36
10.4
10 mm 10 mm
0.139
10.8
10.3
mm
ry
10 mm
4.83
7.37
10 mm
3
Zex
0.0561 2.25
0.0824 3.30
0.0647 2.59
0.0960 3.84
0.181
0.276
10 mm
0.0132
0.0188
0.0219
0.0319
0.0251
0.0473
Iey
Notes:
1. This table is calculated in accordance with AS/NZS 4600 using design yield stress fy = 350 MPa and design tensile strength fu = 380 MPa.
2. Effective section properties are calculated in accordance with AS/NZS 4600.
3. All columns of the table (except for Mass per metre and External Surface Area) are calculated using design thicknesses of 1.45mm and 2.4mm rather than the
respective thicknesses t of 1.6mm and 2.5mm. This is to comply with clause 1.5.1.6 of AS/NZS4600.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
189
298
204
322
227
442
mm
Ae
Iex
Zey
1.32
1.88
1.75
2.55
2.01
3.78
103mm3
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
m /t
m /m
b-2r
Full
Section
d-2r Area
0.191 53.1
per t
per m
External
Surface Area
mm mm mm
Designation
RECTANGULAR
HOLLOW
SECTIONS
Galtube
Plus
294
223
248
178
144
165
120
103
78.9
N
S
C
C
N
C
C
C
N
37.1
45.0
17.4
27.2
33.1
14.1
22.3
27.2
34.6
1.00
0.890
1.00
1.00
1.00
1.00
1.00
1.00
1.00
425
362
316
229
197
208
154
133
110
44.8
37.8
26.1
18.4
15.6
14.5
10.4
8.87
7.25
78.6
79.1
56.6
58.2
58.7
46.4
48.0
48.5
49.0
327
277
248
178
151
165
120
103
84.5
207
175
159
113
96.1
106
76.5
65.4
53.6
280
239
205
150
129
134
101
87.1
72.3
28.0
23.9
15.4
11.3
9.70
8.38
6.29
5.44
4.52
4530
3810
4800
3330
2810
3900
2730
2310
1880
31.3
38.0
14.7
23.0
28.0
11.9
18.8
23.0
29.3
21.8
26.0
14.9
22.0
26.2
15.1
22.1
26.3
32.7
0.774
0.779
0.561
0.574
0.579
0.461
0.474
0.479
0.483
35.6
29.9
37.7
26.2
22.1
30.6
21.4
18.2
14.8
6.0 SHS
5.0 SHS
6.0 SHS
5.0 SHS
6.0 SHS
5.0 SHS
4.0 SHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for
AS 1163 grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
409
465
C
23.9
1.00
599
64.5
77.1
465
297
392
39.2
6600
20.2
14.7
0.761
51.8
744
S
N
46.9
30.5
0.853
1.00
681
972
88.7
129
99.0
97.5
103mm3
521
750
(C,N,S)
Compactness(3) Ze
330
477
le
450
639
103mm3
kf
56.2
79.8
106mm4
5730
8400
mm
39.7
25.8
103mm3
rx
21.7
14.6
103mm3
Sx
Properties for
Design to AS 4100
0.974
103mm3
Zn
Form
Factor
45.0
106mm4
Ix
Torsion
Modulus
65.9
mm2
Ag
Torsion
Constant
6.0 SHS
0.961
(b-2t)
Gross
Section
Area
Properties
m2/t
m2/m
mm mm mm
kg/m
per t
External
Surface Area
per m
Mass
per
metre
Designation
shs
Square
HOLLOW
SECTIONS
49
50
56.6
49.1
36.5
38.4
33.6
28.2
22.5
18.3
C
C
C
C
C
C
N
18.7
27.7
12.4
15.4
19.8
27.2
33.1
1.00
1.00
1.00
1.00
1.00
1.00
1.00
62.7
47.1
48.2
42.6
36.1
28.7
24.6
3.05
2.24
2.04
1.77
1.48
1.15
0.971
33.7
34.5
27.5
28.0
28.6
29.2
29.4
49.1
36.5
38.4
33.6
28.2
22.5
19.1
31.4
23.2
24.7
21.6
18.0
14.2
12.0
40.7
30.9
30.9
27.5
23.5
19.1
16.4
1.81
1.37
1.16
1.03
0.882
0.716
0.614
1590
1150
1530
1310
1080
841
709
15.8
23.4
10.5
13.0
16.8
23.0
28.0
26.7
37.6
22.8
27.0
33.3
43.9
52.4
0.334
0.341
0.274
0.279
0.283
0.290
0.291
12.5
9.06
12.0
10.3
8.49
6.60
5.56
5.0 SHS
3.5 SHS
75 x 75 x 6.0 SHS
5.0 SHS
4.0 SHS
3.0 SHS
2.5 SHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for
AS 1163 grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
s Available as Dualgrade 350L0/450L0 - please refer to page 44 DuraGal Rectangular Hollow Sections for the Properties for Design to AS 4100.
37.1
C
15.2
1.00
71.6
3.54
33.2
56.6
36.3
46.2
2.06
1870
12.8
22.5
0.330
14.6
89 x 89 x 6.0 SHS
52.6
N
37.1
1.00
53.2
2.79
39.4
41.2
26.0
35.4
1.77
1140
31.3
43.5
0.390
8.96
3.0 SHS
63.5
C
27.2
1.00
68.0
3.63
38.8
52.6
33.5
44.6
2.23
1480
23.0
32.9
0.383
11.6
4.0 SHS
73.5
C
21.3
1.00
81.4
4.42
38.3
63.5
40.5
53.1
2.66
1810
18.0
26.6
0.379
14.2
5.0 SHS
98.6
C
17.4
1.00
93.6
5.15
37.7
73.5
47.1
60.7
3.04
2130
14.7
22.4
0.374
16.7
6.0 SHS
103mm3
(C,N,S)
10.8
1.00
123
7.00
36.1
98.6
Compactness(3) Ze
63.6
le
78.1
kf
3.91
103mm3
3000
9.11
15.4
0.361
23.5
Properties for
Design to AS 4100
106mm4
rx
Form
Factor
mm
Sx
Torsion
Modulus
103mm3
Zn
Torsion
Constant
103mm3
Ix
Properties
103mm3
mm2
Ag
Gross
Section
Area
106mm4
(b-2t)
m2/t
per t
m2/m
per m
External
Surface Area
kg/m
mm mm mm
Mass
per
metre
Square
HOLLOW
SECTIONS
Designation
shs
m2/t
23.1
m2/m
0.234
mm mm mm
20.6
16.6
14.1
14.5
13.2
11.4
9.39
8.07
5.10
C
C
C
C
C
C
C
C
N
16.9
23.3
28.4
8.50
9.47
12.4
17.4
21.3
34.6
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
26.2
21.0
18.1
17.7
16.3
14.3
11.8
10.2
7.03
0.939
0.733
0.624
0.518
0.469
0.403
0.321
0.275
0.185
24.5
25.1
25.3
17.2
17.8
18.3
19.0
19.2
19.6
20.6
16.6
14.1
14.5
13.2
11.4
9.39
8.07
5.46
13.2
10.4
8.91
9.45
8.51
7.33
5.92
5.09
3.44
17.0
14.0
12.0
11.0
10.3
9.15
7.79
6.78
4.68
0.552
0.454
0.391
0.275
0.257
0.229
0.195
0.169
0.117
921
721
609
932
814
681
541
459
303
14.3
19.7
24.0
6.33
8.00
10.5
14.7
18.0
29.3
33.6
44.1
52.6
23.8
27.9
34.2
44.7
53.1
81.7
0.243
0.250
0.251
0.174
0.179
0.183
0.190
0.191
0.195
7.23
5.66
4.78
7.32
6.39
5.35
4.25
3.60
2.38
4.0 SHS
3.0 SHS
2.5 SHS
50 x 50 x 6.0 SHS
5.0 SHS
4.0 SHS
3.0 SHS
2.5 SHS
1.6 SHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for AS 1163
grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
s Available as Dualgrade 350L0/450L0 - please refer to page 44 DuraGal Rectangular Hollow Sections for the Properties for Design to AS 4100.
24.3
C
13.0
1.00
30.6
1.12
23.9
24.3
15.6
19.6
0.638
1110
11.0
27.3
0.239
8.75
5.0 SHS
103mm3
27.5
C
(C,N,S)
10.5
1.00
Compactness(3) Ze
34.2
le
Properties for
Design to AS 4100
1.27
kf
Form
Factor
23.4
27.5
17.8
21.7
0.706
1290
8.83
Torsion
Modulus
103mm3
Torsion
Constant
106mm4
mm
rx
103mm3
Sx
103mm3
Zn
Ix
106mm4
Ag
Properties
mm2
(b-2t)
Gross
Section
Area
kg/m
per t
External
Surface Area
per m
Mass
per
metre
Designation
shs
Square
HOLLOW
SECTIONS
51
52
6.74
5.72
4.97
4.13
3.69
1.91
1.71
1.47
1.24
C
C
C
C
C
C
C
C
C
13.4
16.6
21.3
11.4
14.2
7.49
9.47
12.4
16.1
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
7.07
6.21
5.23
5.94
5.18
4.58
2.27
2.07
1.80
1.54
0.158
0.136
0.113
0.121
0.102
0.0889
0.0333
0.0297
0.0253
0.0212
14.9
15.1
15.4
12.1
12.8
13.1
8.74
8.99
9.24
9.44
5.72
4.97
4.13
4.86
4.23
3.69
1.91
1.71
1.47
1.24
3.61
3.13
2.61
3.16
2.67
2.33
1.21
1.08
0.926
0.780
4.66
4.11
3.47
3.68
3.40
3.02
1.47
1.35
1.19
1.02
0.0932
0.0822
0.0694
0.06
0.0595
0.0529
0.0184
0.0169
0.0148
0.0128
421
359
294
441
361
309
241
209
174
143
11.3
14.0
18.0
6.75
9.67
12.0
6.33
8.00
10.5
13.6
45.3
53.7
66.4
35.48
45.8
54.2
47.4
55.7
68.3
84.1
0.150
0.151
0.153
0.123
0.130
0.131
0.0897
0.0914
0.0931
0.0945
3.30
2.82
2.31
3.46
2.83
2.42
1.89
1.64
1.36
1.12
3.0 SHS
2.5 SHS
2.0 SHS
35 x 35 x 4.0 SHS
3.0 SHS
2.5 SHS
25 x 25 x 3.0 SHS
2.5 SHS
2.0 SHS
1.6 SHS
4.23
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for AS 1163
grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
s Available as Dualgrade 350L0/450L0 - please refer to page 44 DuraGal Rectangular Hollow Sections for the Properties for Design to AS 4100.
103mm3
(C,N,S)
9.47
1.00
8.33
10 mm
10 mm
Compactness(3) Ze
0.192
mm
14.2
10 mm
4
6.74
10 mm
6
4.36
10 mm
3
5.26
10 mm
3
le
0.105
mm
3
kf
521
8.00
m /t
3
rx
34.9
Sx
Properties for
Design to AS 4100
m /m
Zn
Form
Factor
0.143
Ix
Torsion
Modulus
kg/m
Ag
Torsion
Constant
4.09
(b-2t)
Properties
40 x 40 x 4.0 SHS
per t
per m
Gross
Section
Area
mm mm mm
External
Surface Area
Mass
per
metre
Square
HOLLOW
SECTIONS
Designation
shs
16.0
38.4
33.6
28.2
22.2
17.0
27.5
24.3
20.6
16.6
13.7
C
C
C
N
N
C
C
C
C
N
14.1
17.4
22.5
30.9
37.6
11.9
14.8
19.1
26.4
32.2
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
48.2
42.6
36.1
28.7
24.6
34.2
30.6
26.2
21.0
18.1
2.04
1.77
1.48
1.15
0.971
1.27
1.12
0.939
0.733
0.624
27.5
28.0
28.6
29.2
29.4
23.4
23.9
24.5
25.1
25.3
38.4
33.6
28.2
22.5
19.1
27.5
24.3
20.6
16.6
14.1
24.7
21.6
18.0
14.2
12.0
17.8
15.6
13.2
10.4
8.91
30.9
27.5
23.5
19.1
16.4
21.7
19.6
17.0
14.0
12.0
1.16
1.03
0.882
0.716
0.614
0.706
0.638
0.552
0.454
0.391
1530
1310
1080
841
709
1290
1110
921
721
609
10.5
13.0
16.8
23.0
28.0
8.83
11.0
14.3
19.7
24.0
22.8
27.0
33.3
43.9
52.4
23.1
27.3
33.6
44.1
52.6
0.274
0.279
0.283
0.290
0.291
0.234
0.239
0.243
0.250
0.251
12.0
10.3
8.49
6.60
5.56
10.1
8.75
7.23
5.66
4.78
75 x 75 x 6.0 SHS
5.0 SHS
4.0 SHS
3.0 SHS
2.5 SHS
65 x 65 x 6.0 SHS
5.0 SHS
4.0 SHS
3.0 SHS
2.5 SHS
52.1
34.0
859
1.09
24.1
17.6
28.0
35.6
1.70
36.2
0.878
45.6
22.3
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 450 MPa and design tensile strength fu = 500 MPa as per AS 4100 table 2.1 for AS 1163 grade C450L0.
2. Grade C450L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
5. DuraGal Dualgrade C350L0/C450L0 hollow sections have a minimum yield stress of 450 MPa (fy = 450 MPa), a minimum tensile strength of 500 MPa (fu = 500 MPa) and a minimum
elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
57.7
0.696
29.6
1.38
35.8
22.8
14.3
19.7
0.889
694
43.0
64.8
0.353
5.45
2.0 SHS
0.351
34.4
6.74
90 x 90 x 2.5 SHS
51.9
S
42.0
0.952
53.2
2.79
39.4
41.2
26.0
35.4
1.77
1140
31.3
43.5
0.390
8.96
3.0 SHS
63.5
N
30.9
1.00
68.0
3.63
38.8
52.6
33.5
44.6
2.23
1480
23.0
32.9
0.383
11.6
4.0 SHS
73.5
C
24.1
1.00
81.4
4.42
38.3
63.5
40.5
53.1
2.66
1810
18.0
26.6
0.379
14.2
5.0 SHS
103mm3
(C,N,S)
19.7
1.00
93.6
5.15
37.7
73.5
47.1
60.7
3.04
2130
14.7
22.4
103mm3
106mm4
mm
103mm3
0.374
Compactness(3) Ze
16.7
le
103mm3
kf
103mm3
106mm4
rx
mm2
Sx
Properties for
Design to AS 4100
m2/t
Zn
Form
Factor
m2/m
Ix
Torsion
Modulus
kg/m
Ag
Torsion
Constant
mm mm mm
d
t
(b-2t)
Gross
Section
Area
per t
External
Surface Area
per m
Mass
per
metre
Properties
Designation
DuraGal
shs
Square
HOLLOW
SECTIONS
53
54
13.2
11.4
9.39
8.07
4.74
6.74
5.72
4.97
4.23
3.69
3.09
2.57
1.91
1.71
1.47
1.24
C
C
C
C
N
C
C
C
C
C
C
C
C
C
C
C
14.1
19.7
24.1
39.2
10.7
15.2
18.8
13.0
16.1
20.8
26.7
8.50
10.7
14.1
18.3
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
16.3
14.3
11.8
10.2
7.03
8.33
7.07
6.21
5.18
4.58
3.89
3.26
2.27
2.07
1.80
1.54
0.469
0.403
0.321
0.275
0.185
0.192
0.158
0.136
0.102
0.0889
0.0741
0.0611
0.0333
0.0297
0.0253
0.0212
18.3
19.0
19.2
19.6
14.2
14.9
15.1
12.8
13.1
13.3
13.5
8.74
8.99
9.24
9.44
13.2
11.4
9.39
8.07
5.46
6.74
5.72
4.97
4.23
3.69
3.09
2.57
1.91
1.71
1.47
1.24
7.33
5.92
5.09
3.44
4.36
3.61
3.13
2.67
2.33
1.95
1.62
1.21
1.08
0.926
0.780
9.15
7.79
6.78
4.68
5.26
4.66
4.11
3.40
3.02
2.58
2.16
1.47
1.35
1.19
1.02
0.229
0.195
0.169
0.117
0.105
0.0932
0.0822
0.0595
0.0529
0.0451
0.0379
0.0184
0.0169
0.0148
0.0128
681
541
459
303
521
421
359
361
309
254
207
241
209
174
143
10.5
14.7
18.0
29.3
8.00
11.3
14.0
9.67
12.0
15.5
19.9
6.33
8.00
10.5
13.6
34.2
44.7
53.1
81.7
34.9
45.3
53.7
45.8
54.2
66.8
82.7
47.4
55.7
68.3
84.1
0.183
0.190
0.191
0.195
0.143
0.150
0.151
0.130
0.131
0.133
0.135
0.0897
0.0914
0.0931
0.0945
5.35
4.25
3.60
2.38
4.09
3.30
2.82
2.83
2.42
1.99
1.63
1.89
1.64
1.36
1.12
4.0 SHS
3.0 SHS
2.5 SHS
1.6 SHS
40 x 40 x 4.0 SHS
3.0 SHS
2.5 SHS
35 x 35 x 3.0 SHS
2.5 SHS
2.0 SHS
1.6 SHS
25 x 25 x 3.0 SHS
2.5 SHS
2.0 SHS
1.6 SHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 450 MPa and design tensile strength fu = 500 MPa as per AS 4100 table 2.1 for AS 1163 grade C450L0.
2. Grade C450L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
4. For SHS and RHS the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
5. DuraGal Dualgrade C350L0/C450L0 Hollow Sections have a minimum yield stress of 450 MPa (fy = 450 MPa), a minimum tensile strength of 500 MPa (fu = 500 MPa) and a minimum
elongation equal to 16%, ie. the strength of AS 1163 grade C450L0 and the elongation of AS 1163 grade C350L0.
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
103mm3
(C,N,S)
10.7
1.00
10 mm
10 mm
mm
17.8
10 mm
10 mm
8.51
10 mm
Compactness(3) Ze
10.3
10 mm
3
0.257
mm
3
814
8.00
le
m /t
3
kf
27.9
m /m
3
0.179
rx
6.39
Sx
Properties for
Design to AS 4100
kg/m
6
Zn
Form
Factor
50 x 50 x 5.0 SHS
Ix
Torsion
Modulus
mm mm mm
Ag
Torsion
Constant
(b-2t)
Gross
Section
Area
3
per t
per m
External
Surface Area
Mass
per
metre
Designation
Properties
Square
HOLLOW
SECTIONS
DuraGal
shs
1.63
1.38
1.12
0.873
1.6 SHS
30 x 30 x 1.6 SHS
25 x 25 x 1.6 SHS
20 x 20 x 1.6 SHS
1.88
2.42
1.6 SHS
35 x 35 x 2.5 SHS
0.0745
0.0945
0.115
0.135
0.131
0.155
0.151
0.195
0.191
0.255
85.4
84.1
83.3
82.7
54.2
82.3
53.7
81.7
53.1
81.2
52.6
9.79
13.2
16.7
20.1
10.6
23.6
12.7
30.5
16.8
40.8
23.1
(b-2r)
102
131
160
189
298
218
346
276
442
363
586
mm2
Af
Full
Section
Area
0.00570
0.0119
0.0214
0.0350
0.0514
0.0534
0.0797
0.107
0.164
0.243
0.378
106mm4
Ix
0.570
0.949
1.43
2.00
2.94
2.67
3.99
4.30
6.56
7.46
11.6
103mm3
Zx
0.440
0.720
1.07
1.48
2.26
1.97
3.03
3.14
4.92
5.42
8.59
103mm3
Zn
0.697
1.14
1.69
2.36
3.58
3.13
4.81
4.99
7.80
8.61
13.6
103mm3
Sx
7.47
9.51
11.6
13.6
13.1
15.6
15.2
19.7
19.3
25.8
25.4
mm
rx
0.00959
0.0195
0.0346
0.0561
0.0860
0.0848
0.132
0.169
0.266
0.377
0.601
106mm4
Torsion
Constant
0.864
1.43
2.15
3.01
4.45
4.01
6.02
6.45
9.89
11.2
17.5
103mm3
Torsion
Modulus
102
131
160
189
298
218
346
276
442
308
586
mm2
Ae
Effective
Section
Area
0.00570
0.0119
0.0214
0.0350
0.0514
0.0534
0.0797
0.107
0.164
0.215
0.378
0.570
0.949
1.43
2.00
2.94
2.67
3.99
4.30
6.56
6.61
11.6
103mm3
Zex
Zen
0.440
0.720
1.07
1.48
2.26
1.97
3.03
3.14
4.92
5.42
8.59
103mm3
Iex
Effective Section
Properties
Notes:
1. This table is calculated in accordance with AS/NZS 4600 using design yield stress fy = 350 MPa and design tensile strength fu = 380 MPa.
2. Effective section properties are calculated in accordance with AS/nzs 4600.
3. All columns of the table (except for Mass per metre and External Surface Area) are calculated using design thicknesses of 1.45mm and 2.4mm rather than
respective thicknesses t of 1.6mm and 2.5mm. This is to comply with clause 1.5.1.6 of AS/NZS 4600.
4. For Square and Rectangular Hollow Sections the outside corner radius r used in calculating the section properties is equal to 2t for sections with thickness
t < 3.0mm and 2.5t for sections with t > 3.0mm.
F These items are not commonly stocked but are available on request. Minimum order quantities may apply on some sizes.
2.38
2.82
1.6 SHS
3.60
50 x 50 x 2.5 SHS
40 x 40 x 2.5 SHS
3.13
1.6 SHS
4.78
65 x 65 x 2.5 SHS
0.251
m2/t
m2/m
kg/m
mm mm mm
per t
External
Surface Area
per m
Mass
per
metre
Designation
Galtube
Plus
Square
HOLLOW
SECTIONS
55
56
100
100 x 45 TFB
45
65
mm
bf
6.0
8.5
mm
tf
mm
4.0
320
320
320
Form
Factor
kf
Compactness
About x-axis
34.1
80.3
10 mm
Zex
3
3.0
4.0
mm
r2
About y-axis
22.0
21.6
tw
d1
Compactness
88
108
d1
Depth
Toe Between
Radii Flanges
5.3
15.6
10 mm
3
Zey
3.42
3.53
2tf
(bf-tw)
2
10 mm
10 mm
1.46
4.34
29.2
69.4
Zx
4
Ix
6
100 x 45 TFB
125 x 65 TFB
Designation
bf
360
360
MPa
fy
Flange
360
360
MPa
fy
Web
34.1
80.3
tw
39.9
50.9
mm
rx
r1 r
2
Form
Factor
kf
98
10 mm
3
Sx
About x-axis
AS 3679.1-350
917
1670
mm
Ag
Gross Area
of Cross
Section
Notes:
1. For OneSteel-300PLUS sections the tensile strength (fu) is 440 MPa.
2. For Grade 350 sections the tensile strength (fu) is 480 MPa.
3. C = Compact Section; N = Non-compact Section; S = Slender Section.
4. OneSteel-300PLUS hot rolled sections are produced to exceed the minimum requirements of AS/NZS 3679.1-300.
5. OneSteel-300PLUS replaced Grade 250 as the base grade for these sections in 1994.
320
MPa
MPa
100 x 45 TFB
fy
fy
125 x 65 TFB
Designation
Web
Flange
OneSteel-300PLUS
7.0
8.0
mm
5.0
r1
tw
7.2
mm
125
kg/m
Mass Depth
per
Flange Flange
Web
Root
of
metre Section Width Thickness Thickness Radii
= =
ly
4
3.53
10.4
10 mm
3
Zy
Compactness
34.1
80.3
103mm3
Zex
6.0
17.2
10 mm
3
Sy
About y-axis
About x-axis
0.0795
0.337
10 mm
tf
d1
tf
10 mm
10 mm6
Iw
9
5.3
15.6
103mm3
Zey
0.0176
1.14
About y-axis
11.6
40.2
Compactness
9.31
14.2
J
3
ry
Torsion Warping
Constant Constant
mm
Taper
Flange
Beams
Designation
OneSteel-300PLUS
bf-tw
2
Joists
165.00
92.90
86.5
32.9
91.8
59.3
4.420
124.0
475
424
63.20
4080
8.97
51.3
282
13.0
5.5
8.0
149
298
32.0
310UB
197.00
157.0
38.3
142.0
92.7
7.650
129.0
633
569
86.40
5210
7.79
46.5
284
11.4
6.1
10.2
165
304
40.4
310UB
237.00
233.0
39.0
166.0
109.0
9.01
130.0
729
354
100.00
5930
6.75
42.3
284
11.4
6.7
11.8
166
307
46.2
310UB
284.00
161.0
37.6
146.0
94.7
8.100
146.0
777
689
121.00
5720
8.46
48.2
333
11.4
6.9
9.7
171
352
44.7
360UB
330.00
241.0
38.5
173.0
9.600 112.0
148.0
897
798
142.00
6470
7.12
45.6
333
11.4
7.3
11.5
171
356
50.7
360UB
394.00
338.0
39.0
198.0
11.000 128.0
149.0
1010
899
161.00
7240
6.31
41.6
333
11.4
8.0
13.0
172
359
56.7
360UB
467.00
234.0
38.6
179.0
10.300 115.0
165.0
1060
933
188.00
6890
7.82
50.1
381
11.4
7.6
10.9
178
403
53.7
410UB
708.00
337.0
39.7
209.0
12.100 135.0
168.0
1200
216.00 1060
7640
6.65
48.8
381
11.4
7.8
12.8
178
406
59.7
410UB
815.00
378.0
41.2
238.0
14.500 153.0
186.0
1480
296.00 1300
8580
7.15
50.4
428
11.4
8.5
12.7
190
454
67.1
460UB
919.00
530.0
41.8
271.0
16.600 175.0
188.0
1660
335.00 1460
9520
6.24
47.1
428
11.4
9.1
14.5
190
457
74.6
460UB
1330.00
701.0
42.2
303.0
18.600 195.0
188.0
1840
372.00 1610
10500
5.66
43.3
428
11.4
9.9
16.0
191
460
82.1
460UB
1590.00
526.0
43.8
301.0
20.100 193.0
213.0
2070
477.00 1810
10500
7.55
52.3
502
14.0
9.6
13.2
209
528
82.0
530UB
2530.00
775.0
44.9
355.0
23.800 228.0
217.0
2370
554.00 2080
11800
6.37
49.2
502
14.0
10.2
15.6
209
533
92.4
530UB
2980.00
790.0
47.5
402.0
2900
761.00 2530
13000
7.34
54
572
14.0
10.6
14.8
228
602
101.0
610UB
29.300 257.0
246.0
3290
875.00 2880
14500
6.27
51.1
572
14.0
11.2
17.3
228
607
113.0
242.0
249.0
3680
986.00 3230
16000
5.54
48.1
572
14.0
11.9
19.6
229
612
125.0
3450.00
Iw
1140.0
Sy
1560.0
Zy
48.7
ly
106mm4
49.6
rx
mm
610UB
610UB
mm2
mm
r1
mm
tw
mm
mm
mm
mm
469.0
Sx
Torsion Warping
Constant Constant
536.0
Zx
About y-axis
34.300 300.0
Ix
About x-axis
39.300 343.0
Ag
Gross Area
of Cross
Section
109mm6
tw
(bf-tw)
2tf
d1
d1
103mm4
tf
Depth
Between
Flanges
tf
ry
bf
Root
Radii
r1
d1
mm
Depth
Flange Flange
Web
of
Section Width Thickness Thickness
bf
tw
tf
103mm3 103mm3
Mass
per
metre
bf-tw
2
kg/m
Designation
OneSteel-300PLUS
Universal Beams
UB
UNIVERSAL
BEAMS
57
58
3.56
2.53
28.1
16.6
20.8
13.2
0.495
61.1
102
88.8
6.66
1780
5.00
27.2
136
8.0
5.0
7.0
75
150
14.0
150UB
5.88
60.5
17.1
28.2
17.9
0.672
62.8
135
117
9.05
2300
3.63
22.7
136
8.0
6.0
9.5
75
155
18.0
150UB
6.80
31.5
20.4
29.4
19.0
0.853
72.0
138
123
10.60
2040
6.11
35.3
159
8.9
4.5
7.0
90
173
16.1
180UB
8.71
44.8
20.6
33.7
21.7
0.975
72.6
157
139
12.10
2300
5.31
31.8
159
8.9
5.0
8.0
90
175
18.1
180UB
10.40
81.6
20.8
42.3
27.1
1.220
73.6
195
171
15.30
2820
4.20
26.5
159
8.9
6.0
10.0
90
179
22.2
180UB
26.00
38.6
22.1
35.7
23.0
1.140
82.6
180
160
15.80
2320
6.75
40.9
184
11.0
4.5
7.0
99
198
18.2
200UB
29.20
45.0
31.0
63.4
41.3
2.750
85.5
231
208
21.00
2870
9.14
37.5
188
8.9
5.0
7.0
133
202
22.3
200UB
37.60
62.7
30.8
70.9
46.1
3.060
85.4
260
232
23.60
3230
8.15
32.3
188
8.9
5.8
7.8
133
203
25.4
200UB
36.7
105.0
31.8
88.4
57.5
3.860
87.3
316
281
29.10
3820
6.65
29.8
188
8.9
6.3
9.6
134
207
29.8
200UB
65.90
67.4
27.9
63.6
41.1
2.550
104.0
319
285
35.4
3270
7.44
46.4
232
12.0
5.0
8.0
124
248
25.7
89.3
33.4
94.2
61.2
4.470
105.0
250UB
85.20
158.0
34.5
119.0
77.5
5.660
108.0
397
354
44.50
4010
8.13
38.4
234
8.9
6.1
8.6
146
252
31.4
250UB
Iw
486
435
55.70
4750
6.40
36.6
234
8.9
6.4
10.9
146
256
37.3
250UB
Sy
109mm6
Zy
103mm4
ly
Torsion Warping
Constant Constant
ry
rx
About y-axis
mm
Sx
tf
103mm3 103mm3
Zx
r1
d1
106mm4
Ix
bf
tw
mm
Ag
mm2
mm
r1
tw
About x-axis
mm
d1
Gross Area
of Cross
Section
tw
(bf-tw)
2tf
mm
tf
d1
mm
bf
Depth
Between
Flanges
mm
Root
Radii
mm
Depth
Flange Flange
Web
of
Section Width Thickness Thickness
kg/m
Mass
per
metre
tf
UNIVERSAL
BEAMS
Designation
OneSteel-300PLUS
bf-tw
2
UB
386.0
342.0
289.0
292.0
262.0
230.0
203.0
172.0
193.0
168.0
139.0
163.0
138.0
85.7
C
C
C
C
C
C
C
N
C
C
N
C
N
N
2900
2370
2070
1840
1660
1480
1200
1050
1010
897
762
729
629
462
C
C
C
C
C
C
C
N
C
C
N
C
N
N
0.867
0.907
0.880
0.956
0.926
0.901
0.918
0.894
0.974
0.943
0.911
0.972
0.936
0.898
360
360
360
360
360
360
360
360
360
360
360
360
360
360
340
340
340
340
340
340
340
360
340
340
360
340
360
360
610UB
530UB
530UB
460UB
460UB
460UB
410UB
410UB
360UB
360UB
360UB
310UB
310UB
310UB
386.0
342.0
289.0
292.0
262.0
230.0
203.0
173.0
193.0
168.0
140.0
163.0
139.0
86.9
C
C
C
C
C
C
C
C
C
C
N
C
C
N
2900
2370
2070
1840
1660
1480
1200
1060
1010
897
770
729
633
467
C
C
C
C
C
C
C
C
C
C
N
C
C
N
0.888
0.928
0.902
0.979
0.948
0.922
0.938
0.913
0.996
0.963
0.930
0.991
0.952
0.915
320
320
320
320
320
320
320
320
320
320
320
320
320
320
300
300
300
300
300
300
300
320
300
300
320
300
320
320
101.0
92.4
82.0
82.1
74.6
67.1
59.7
53.7
56.7
50.7
44.7
46.2
40.4
32.0
610UB
530UB
530UB
460UB
460UB
460UB
410UB
410UB
360UB
360UB
360UB
310UB
310UB
310UB
Notes:
1. For OneSteel-300PLUS sections the tensile strength (fu) is 440 MPa.
2. For Grade 350 sections the tensile strength (fu) is 480 MPa.
3. C = Compact Section; N = Non-compact Section; S = Slender Section.
4. OneSteel-300PLUS hot rolled sections are produced to exceed the minimum requirements of AS/NZS 3679.1-300.
5. OneSteel-300PLUS replaced Grade 250 as the base grade for these sections in 1994.
451.0
C
3290
C
0.891
340
340
610UB
451.0
3290
0.926
300
280
113.0
610UB
103mm3
515.0
C
3680
0.916
MPa
10 mm
Zey
340
Compactness
MPa
340
Zex
610UB
10 mm
Compactness
515.0
Form
Factor
kf
fy
3680
fy
10 mm
3
Designation
0.950
Zey
About y-axis
MPa
3
Compactness
About x-axis
300
Zex
Web
MPa
Compactness
Flange
AS 3679.1-350
280
Form
Factor
kf
About y-axis
tf
d1
kg/m
fy
fy
About x-axis
bf
r1
tw
tf
125.0
Mass per
metre
Web
Flange
bf-tw
2
610UB
Designation
OneSteel-300PLUS
Universal Beams
UB
UNIVERSAL
BEAMS
59
60
116.0
91.4
C
N
C
486
395
319
316
C
N
C
C
N
1.000
1.000
0.949
1.000
1.000
1.000
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
37.3
31.4
25.7
29.8
25.4
22.3
18.2
22.2
18.1
250UB
250UB
200UB
200UB
200UB
200UB
180UB
180UB
180UB
90.3
61.7
86.3
68.0
59.4
34.4
40.7
32.5
28.4
26.9
19.8
C
C
N
N
C
C
C
C
C
C
392
319
316
257
225
180
195
157
138
135
102
C
C
N
N
C
C
C
C
C
C
0.932
1.000
1.000
1.000
0.970
1.000
1.000
1.000
1.000
1.000
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
250UB
200UB
200UB
200UB
200UB
180UB
180UB
180UB
150UB
150UB
61.7
86.3
68.8
60.3
34.4
40.7
32.5
28.4
26.9
19.8
C
N
N
C
C
C
C
C
C
259
227
180
195
157
138
135
102
N
C
C
C
C
C
C
0.990
1.000
1.000
1.000
1.000
1.000
320
320
320
320
320
320
320
320
320
16.1
18.0
14.0
150UB
150UB
Notes:
1. For OneSteel-300PLUS sections the tensile strength (fu) is 440 MPa.
2. For Grade 350 sections the tensile strength (fu) is 480 MPa.
3. C = Compact Section; N = Non-compact Section; S = Slender Section.
4. OneSteel-300PLUS hot rolled sections are produced to exceed the minimum requirements of AS/NZS 3679.1-300.
5. OneSteel-300PLUS replaced Grade 250 as the base grade for these sections in 1994.
116.0
C
N
486
C
N
0.991
Zey
103mm3
1.000
Compactness
360
Zex
103mm3
360
Compactness
360
Form
Factor
kf
About y-axis
360
fy
250UB
fy
About x-axis
250UB
Designation
tf
d1
MPa
103mm3
250UB
Zey
r1
Web
bf
tw
MPa
103mm3
Compactness
MPa
Zex
MPa
Compactness
kg/m
Form
Factor
kf
fy
Flange
AS 3679.1-350
tf
UNIVERSAL
BEAMS
Designation
fy
About y-axis
Mass per
metre
About x-axis
Web
Flange
OneSteel-300PLUS
bf-tw
2
UB
2390.0
1980.0
1560.0
713.0
557.0
195.0
166.0
142.0
39.6
30.8
21.1
2.3
1630.0
928.0
1040.0
586.0
477.0
325.0
228.0
197.0
109.0
50.2
34.9
77.5
76.7
65.2
64.5
51.7
51.5
51.0
38.5
38.1
36.6
24.5
893.0
725.0
575.0
463.0
303.0
264.0
230.0
139.0
112.0
80.2
35.2
72.90 478.0
48.40 378.0
38.80 306.0
20.40 199.0
17.70 174.0
15.30 151.0
91.0
73.4
52.4
22.9
7.01
5.62
3.98
1.14
656.0
570.0
500.0
310.0
250.0
184.0
74.4
897.0
584.0
512.0
451.0
274.0
223.0
166.0
65.6
114.00
61.30
52.80
45.90
22.20
17.60
12.60
3.18
12400
11400
9320
7620
6660
5900
4730
3860
2980
1890
9.58
7.10
8.64
6.89
7.84
8.90
6.34
7.79
10.70
6.71
21.5
26.2
19.5
22.7
24.8
17.1
21.0
22.8
16.6
225
181
181
181
139
139
139
83
11.4
11.4
11.4
8.9
8.9
8.9
10.0
8.0
7.3
8.1
6.6
6.1
5.0
11.0
11.5
9.4
6.8
7.0
154
153
152
99
158
152
97
23.4
14.8
Iw
90.20 588.0
Sy
Zy
7.89
23.3
28.0
277
277
225
16.5
16.5
14.0
14.0
11.9
9.9
10.5
8.6
9.3
18.7
15.4
17.3
14.2
14.2
12.5
307
305
256
254
205
204
203
315
308
260
254
210
206
203
162
118.0
96.8
89.5
72.9
59.5
52.2
46.2
37.2
30.0
310UC
310UC
250UC
250UC
200UC
200UC
200UC
150UC
150UC
150UC
100UC
103mm3
15000
Iy
106mm4
2860.0
rx
mm
2520.0
103mm3
3810.0
103mm3
78.2
17500
6.80
20.1
277
16.5
13.8
21.7
309
321
137.0
310UC
106mm4
78.9
20100
5.91
17.7
277
16.5
15.7
25.0
311
327
158.0
310UC
mm2
mm
mm
mm
mm
mm
mm
r1
tw
Sx
Torsion Warping
Constant Constant
Zx
About y-axis
lx
About x-axis
Ag
Gross Area
of Cross
Section
109mm6
tw
(bf-tw)
2tf
d1
d1
103mm4
tf
Depth
Between
Flanges
ry
bf
Root
Radii
tf
d1
tf
mm
Depth
Flange Flange
Web
of
Section Width Thickness Thickness
bf
r1
tw
bf-tw
2
103mm3
Mass
per
metre
kg/m
Designation
OneSteel-300PLUS
Universal Columns
UC
UNIVERSAL
columns
61
62
137.0
109.0
72.3
34.4
N
N
C
248.0
174.0
74.4
N
N
C
1
1
1
360
360
360
360
360
360
150UC
150UC
100UC
110.0
73.5
34.4
C
N
C
250.0
176.0
74.4
C
N
C
320
320
320
320
320
320
30.0
23.4
14.8
150UC
150UC
100UC
Notes:
1. For OneSteel-300PLUS sections the tensile strength (fu) is 440 MPa.
2. For Grade 350 sections the tensile strength (fu) is 480 MPa.
3. C = Compact Section; N = Non-compact Section; S = Slender Section.
4. OneSteel-300PLUS hot rolled sections are produced to exceed the minimum requirements of AS/NZS 3679.1-300.
5. OneSteel-300PLUS replaced Grade 250 as the base grade for these sections in 1994.
220.0
C
310.0
C
1
360
340
150UC
137.0
310.0
320
300
37.2
150UC
260.0
N
490.0
N
1
360
340
200UC
223.0
494.0
320
300
46.2
200UC
299.0
N
569.0
N
1
360
340
200UC
260.0
570.0
320
300
52.2
200UC
448.0
C
656.0
C
1
360
340
200UC
299.0
656.0
320
300
59.5
200UC
567.0
N
977.0
N
1
360
340
250UC
454.0
986.0
320
300
72.9
250UC
684.0
C
1230.0
C
1
360
340
250UC
567.0
1230.0
320
280
89.5
250UC
878.0
N
1550.0
N
1
360
340
310UC
694.0
1560.0
320
300
96.8
310UC
1040.0
N
1950.0
N
1
340
340
310UC
882.0
1960.0
300
C
2300.0
C
280
1210.0
C
2680.0
C
118.0
Zey
103mm3
Compactness
310UC
Zex
103mm3
340
Compactness
340
Form
Factor
kf
About y-axis
340
fy
340
fy
About x-axis
310UC
1040.0
2300.0
300
280
137.0
Designation
tf
d1
310UC
1210.0
2680.0
300
280
158.0
310UC
103mm3
Zey
310UC
Compactness
Web
tw
MPa
103mm3
Zex
Flange
AS 3679.1-350
bf
r1
MPa
Compactness
MPa
Form
Factor
kf
MPa
fy
fy
About y-axis
kg/m
Mass per
metre
About x-axis
tf
UNIVERSAL
columns
Designation
Web
Flange
OneSteel-300PLUS
Universal Columns
bf-tw
2
UC
T&P
tube
and
pipe
These tables have been prepared as a quick reference guide to assist you to obtain the greatest
benefit from our extensive stock range of material, and we hope it will enable you to specify to your
requirements more exactly in cases where the outside diameters are not mentioned in the normal
descriptions of our stock material. Mechanical property data has also been added for those instances
where the pipe or tube is intended for a structural application. In instances where mechanical
property data has not been included. Should you require this information, please contact us
on 0800 478 335.
63
64
41 to 55%
Tensile stress
Elongation
Si
Phosphorous
Sulphur
Vanadium
Silicon
0.010% max.
0.010% max.
0.030 max.
0.022% max.
Manganese
Carbon
Yield stress
Tensile stress
285 MPa (min.) 340 MPa (max.)
Elongation (min.) 0.6 < 1.0mm = 41%, 1.0 < 1.6mm = 43%, 1.6mm + = 45%
Yield stress
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
LN(m)
Size(mm)
2.44
2.25
1.37
2.03
1.64
1.37
1.89
1.53
1.16
1.47
1.19
1.05
0.91
1.31
1.07
0.81
1.11
0.89
0.68
0.92
0.72
0.55
0.58
0.49
0.40
0.34
Kg/m
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
3.03
2.25
1.82
1.37
1.87
1.57
1.27
0.97
1.19
0.89
0.68
Kg/m
5.5
5.5
LN(m)
Size(mm)
25.4 x 12.7 x 1.2
tube
and
pipe
When forming steel strip into tubular sections, the mechanical properties
are affected. The extent of this effect depends on the specific dimensions
of tube being produced and particularly the tube diameter to thickness
ratio. In general during tube forming, the yield stress will be substantially
increased, the tensile strength slightly increased and elongation reduced.
The following mechanical properties quoted are for the mild steel strip
prior to being manufactured into tubular sections.
Technical Specifications
T&P
Minimum thickness not more than Minimum thickness not more than
5% below nominal thickness
5% below nominal thickness
Straightness - 1 in 1000
measured over the total length
Wall
Straightness
Straightness - 1 in 1500
measured over the total length
< 45mm
> 45mm
< 75mm
75-100mm
> 100mm
Outside Diameter
+ 0.25mm - 0
+ 0.30mm - 0
180-220 BHN
40 Joules min.
at -20C
200-240 BHN
20 Joules min.
at +20C
+ 1.00mm - 0
+ 1.20mm - 0
+ 1.40% - 0
N/mm2
550/700
N/mm2
430
410
400
20%
N/mm2
600/750
N/mm2
480
460
440
18%
Cold Reduced
Wall thickness
< 16mm
> 16-30mm
> 30mm
Normalised
condition
Hot Rolled
condition
Hot Rolled
Tolerances
Longitudinal
Charpy ISO V
impact test
Hardness
Elongation A min.
5.65 So
Rp 0.2 min.
Yield Stress
Strength Rm
Ultimate Tensile
Mechanical Properties
Hollow Bar
T&P
tube
and
pipe
65
66
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
457.2
100
125
150
200
250
300
350
400
450
73.0
50
88.9
60.3
40
80
48.3
32
65
33.4
42.2
25
2.77
6.35
6.35
6.35
3.40
3.05
3.05
3.05
2.77
2.77
2.77
7.92
7.92
7.92
6.35
6.35
7.04
11.13
9.53
9.53
8.38
7.80
9.53
9.53
9.53
9.53
9.27
8.18
7.11
6.55
6.02
5.49
5.16
3.91
3.68
3.56
3.38
2.87
2.77
21.3
26.7
15
20
2.31
17.1
10
2.24
1.73
13.7
6.35
30
Std
Wt
2.11
20
mm
10.3
10
Schedule
O.D.
Nom.
Pipe
mm
ANSI B36.10
14.27
12.70
11.13
10.31
9.27
8.18
7.11
6.55
6.02
5.49
5.16
3.91
3.68
3.56
3.38
2.87
2.77
2.31
2.24
1.73
40
19.05
16.66
15.09
14.27
12.70
10.31
60
Schedule
12.70
12.70
12.70
12.70
12.70
12.70
10.97
9.53
8.56
7.62
7.01
5.54
5.08
4.85
4.55
3.91
3.73
3.20
3.02
2.41
Extra
Strong
80
23.83
21.44
19.05
17.48
15.09
12.70
10.97
9.53
8.56
7.62
7.01
5.54
5.08
4.85
4.55
3.91
3.73
3.20
3.02
2.41
29.36
26.19
23.82
21.44
18.26
15.09
100
34.93
30.96
27.79
25.40
21.44
18.26
14.27
12.70
11.13
120
Schedule
39.67
36.53
31.75
28.58
25.40
20.62
140
45.24
40.49
35.71
33.34
28.58
23.01
18.26
15.88
13.49
11.13
9.53
8.74
7.14
6.35
6.35
5.56
4.78
160
25.40
25.40
22.23
21.95
19.05
17.12
15.24
14.02
11.07
10.15
9.70
9.09
7.82
7.47
Double
Extra
Strong
450
400
350
300
250
200
150
125
100
80
65
50
40
32
25
20
15
10
Nom.
Pipe
mm
T&P
tube
and
pipe
558.8
609.6
660.4
711.2
762.0
812.8
863.6
914.1
550
600
650
700
750
800
850
900
7.92
7.92
7.92
7.92
7.92
7.92
6.35
6.35
12.70
12.70
12.70
12.70
12.70
12.70
9.53
9.53
9.53
508.0
500
6.35
20
mm
10
Schedule
O.D.
Nom.
Pipe
mm
ANSI B36.10
15.88
15.88
15.88
15.88
15.88
14.27
12.70
12.70
30
9.53
9.53
9.53
9.53
9.53
9.53
9.53
9.53
9.53
Std
Wt
19.05
17.48
17.48
17.48
15.88
15.09
40
24.61
22.23
20.62
60
Schedule
12.70
12.70
12.70
12.70
12.70
12.70
12.70
12.70
12.70
Extra
Strong
30.96
28.58
26.19
80
38.89
34.93
32.54
100
46.02
41.28
38.10
120
Schedule
52.37
47.63
44.45
140
59.54
53.98
50.01
160
Double
Extra
Strong
900
850
800
750
700
650
600
550
500
Nom.
Pipe
mm
T&P
tube
and
pipe
67
68
Medium
Heavy
Medium
Heavy
Medium
Heavy
Medium
Heavy
Medium
Heavy
Medium
Heavy
10
15
20
25
32
40
48.3
48.3
42.4
42.4
33.7
33.7
26.9
26.9
21.3
21.3
17.2
17.2
13.5
13.5
3.2
4.0
3.2
4.0
3.2
4.0
2.6
3.2
2.6
3.2
2.3
2.9
2.3
2.9
mm
3.57
4.38
3.10
3.80
2.41
2.94
1.56
1.87
1.21
1.44
0.839
1.02
0.641
0.765
kg/m
14.7
18.7
16.9
21.5
21.7
27.8
22.1
27.8
28.6
36.3
31.7
41.5
42.0
55.6
MPa
2140
2710
2450
3120
3150
4030
3210
4040
4160
5270
4610
6020
6100
8070
P.S.I.
MPa
1640 10.3
2080 13.1
2100 13.2
2690 16.9
2140 13.5
2690 17.0
2770 17.5
3510 22.1
3070 19.4
4020 25.3
4070 25.6
5380 33.9
P.S.I.
11.3
14.4
14.5
18.5
14.7
18.5
19.1
24.2
21.2
27.7
28.0
37.1
MPa
1300
1660
1500
1910
1920
2460
1960
2460
2540
3210
2810
3680
3720
4930
P.S.I.
1740
2230
1780
2240
2300
2920
2550
3340
3380
4470
P.S.I.
8.15 1180
10.4 1500
9.37 1360
11.9 1730
12.0
15.4
12.2
15.4
15.9
20.1
17.6
23.0
23.3
30.8
MPa
150
1570
2000
1600
2010
2070
2620
2290
3000
3030
4020
P.S.I.
7.32 1060
9.30 1350
8.41 1220
10.7 1550
10.8
13.8
11.0
13.8
14.2
18.0
15.8
20.6
20.9
27.7
MPa
1830
2320
2030
2660
2690
3560
P.S.I.
6.49 942
8.24 1200
7.46 1080
9.50 1380
9.56 1390
12.2 1780
9.75 1420
12.3 1780
12.6
16.0
14.0
18.3
18.5
24.5
MPa
1640
2080
1820
2380
2410
3190
P.S.I.
5.81 843
7.38 1070
6.68 969
8.50 1230
8.56 1240
11.0 1590
8.73 1270
11.0 1590
11.3
14.3
12.5
16.4
16.6
22.0
MPa
200
1510
1920
1680
2190
2220
2940
P.S.I.
350
5.36
6.80
778
988
6.16 894
7.84 1140
7.90 1150
10.1 1470
8.05 1170
10.1 1470
10.4
13.2
11.6
15.1
15.3
20.2
MPa
1610
2100
2130
2810
P.S.I.
400
5.13
6.52
745
946
5.90 856
7.51 1090
7.56 1100
9.68 1400
7.71 1120
9.70 1410
9.99 1450
12.7 1840
11.1
14.5
14.7
19.4
MPa
Notes:
1. The above maximum recommended test and working pressures are applicable only to the pipe, if and only if
The applied loads are only from internal pressure in straight pipe. The pipeline should be supported so that bending and external loads are avoided. The pipeline must also be set up with suitable
freedom of angular movement at joints and bends and with provision to accommodate thermal expansion.
The maximum working pressure is based on a design strength of 130 MPa at 50C, and 90% of the nominal wall thickness to allow for the minimum thickness tolerance of the relevant standard.
AS 4041 limits the maximum pressure of this type of pipe (Class 2) to 10 MPa when carrying Very Harmful Fluids (fluid type 2) and for Harmful gases (fluid type 3). This should be considered when
designing pipelines. See the OneStreel publication Fluid type and classes for pressure piping systems for information on fluid types.
Use of this pipe is prohibited where the pipe contents are Lethal (AS 4041 fluid type 1). See the OneSteel publication Fluid type and classes for pressure piping systems for information on fluid types.
2. The piping system working pressures can be limited by the type of couplings or the welding class used in the design of the pipeline.
3. AS 3920.1 gives information on the hazard level of pressure piping and other pressure equipment and the QA required to certify design, manufacture and installation.
4. Pressures have been calculated in accordance with AS 4041-1998 and the draft revision ME/1/8/00-28. p=2feMtf /(D-tf) where
M = 0.7 Class design factor from AS 4041 table 3.12.3 for class 2.
p = Safe working pressure.
tf = 0.9 x wall thickness, in mm.
f = Design strengths from table D2 of AS 4041 for AS 1074 product.
D = Outside diameter, in mm.
e = 0.85 Weld joint factor from table 3.12.2 of AS 4041 for AS 1074 ERW product.
5. No allowance has been made for corrosion, threading, grooving or machining.
Medium
Heavy
mm
100
Circular
hollow
sections
CHS
4.0
5.0
4.5
5.4
5.0
5.4
5.0
5.4
Medium 101.6
Heavy
101.6
19.7
21.3
16.6
17.9
12.2
14.5
9.63
11.9
8.37
10.3
6.43
7.93
5.03
6.19
kg/m
1500
1890
1910
2420
P.S.I.
6.50 944
7.04 1020
7.72 1120
8.36 1210
8.52 1240
10.3 1500
8.52 1240
10.8 1560
9.79 1420
12.4 1800
10.3
13.0
13.2
16.7
MPa
P.S.I.
MPa
4.33
4.69
5.15
5.58
5.68
6.87
629
681
747
809
825
997
5.68 825
7.17 1040
6.53 948
8.25 1200
6.88 998
8.70 1260
3.97
4.29
4.71
5.10
5.20
6.29
5.20
6.56
5.98
7.55
6.30
7.96
MPa
576
623
684
741
755
913
755
953
867
1100
914
1160
1170
1480
P.S.I.
100
P.S.I.
3.60
3.90
4.28
4.63
4.72
5.71
4.72
5.96
5.42
6.85
523
566
621
672
685
828
685
864
787
995
5.72 829
7.22 1050
7.30 1060
9.25 1340
MPa
150
P.S.I.
3.23
3.50
3.84
4.16
4.24
5.13
4.24
5.35
4.87
6.15
5.13
6.49
469
508
558
604
615
744
615
776
707
893
745
942
6.55 951
8.31 1210
MPa
P.S.I.
2.87
3.10
3.41
3.69
3.76
4.54
3.76
4.74
4.32
5.46
4.55
5.75
416
450
494
535
546
660
546
688
627
792
661
835
5.81 843
7.37 1070
MPa
2.57
2.78
3.05
3.30
3.37
4.07
3.37
4.25
3.87
4.89
4.07
5.15
5.20
6.60
MPa
373
403
443
479
489
591
489
616
561
709
591
748
755
958
P.S.I.
200
2.37
2.56
2.81
3.05
3.10
3.75
3.10
3.92
3.57
4.50
3.76
4.75
344
372
408
442
450
545
450
568
518
654
545
689
696
883
P.S.I.
350
4.80
6.08
MPa
2.27
2.45
2.69
2.92
2.97
3.59
2.97
3.75
3.42
4.31
3.60
4.55
329
356
391
423
431
522
431
544
496
626
522
660
667
846
P.S.I.
400
4.59
5.83
MPa
Notes:
1. The above maximum recommended test and working pressures are applicable only to the pipe, if and only if
The applied loads are only from internal pressure in straight pipe. The pipeline should be supported so that bending and external loads are avoided. The pipeline must also be set up with suitable
freedom of angular movement at joints and bends and with provision to accommodate thermal expansion.
The maximum working pressure is based on a design strength of 130 MPa at 50C, and 90% of the nominal wall thickness to allow for the minimum thickness tolerance of the relevant standard.
AS 4041 limits the maximum pressure of this type of pipe (Class 2) to 10 MPa when carrying Very Harmful Fluids (fluid type 2) and for Harmful gases (fluid type 3). This should be considered when
designing pipelines. See the OneStreel publication Fluid type and classes for pressure piping systems for information on fluid types.
Use of this pipe is prohibited where the pipe contents are Lethal (AS 4041 fluid type 1). See the OneSteel publication Fluid type and classes for pressure piping systems for information on fluid types.
2. The piping system working pressures can be limited by the type of couplings or the welding class used in the design of the pipeline.
3. AS 3920.1 gives information on the hazard level of pressure piping and other pressure equipment and the QA required to certify design, manufacture and installation.
4. Pressures have been calculated in accordance with AS 4041-1998 and the draft revision ME/1/8/00-28. p=2feMtf /(D-tf) where
M = 0.7 Class design factor from AS 4041 table 3.12.3 for class 2.
p = Safe working pressure.
tf = 0.9 x wall thickness, in mm.
f = Design strengths from table D2 of AS 4041 for AS 1074 product.
D = Outside diameter, in mm.
e = 0.85 Weld joint factor from table 3.12.2 of AS 4041 for AS 1074 ERW product.
5. No allowance has been made for corrosion, threading, grooving or machining.
4.0
5.0
90
88.9
88.9
Medium
Heavy
3.6
4.5
3.6
4.5
80
76.1
76.1
60.3
60.3
Medium
Heavy
Medium
Heavy
mm
65
50
mm
CHS
Circular
hollow
sections
69
70
mm
1.6
1.0
1.2
1.4
1.4
1.6
2.0
1.0
1.2
1.4
1.6
1.0
1.2
1.4
1.6
1.6
2.0
2.3
2.9
1.0
1.2
1.4
1.6
mm
F 6.3
9.5
13.5
0.210
0.246
0.280
0.280
0.312
0.370
0.249
0.293
0.335
0.375
0.287
0.341
0.390
0.438
0.438
0.528
0.650
0.770
0.328
0.388
0.446
0.501
0.187
kg/m
Mass
per
Metre
0.040
0.040
0.040
0.040
0.040
0.040
0.042
0.042
0.045
0.045
0.045
0.045
m2/m
cm2
0.369
0.432
0.494
0.558
0.558
0.675
0.819
0.976
0.410
0.490
0.565
0.636
Surface
Area
Area
of Section
Z
0.063
0.072
0.081
0.088
0.088
0.100
0.133
0.146
0.093
0.107
0.119
0.131
0.100
0.114
0.127
0.138
0.138
0.156
0.197
0.217
0.129
0.149
0.167
0.183
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.415
0.409
0.402
0.396
0.396
0.384
0.403
0.389
0.471
0.464
0.458
0.452
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
F 14.3
F
F
F
F
F
F
F
F
F 11.1
F
F
F
12.7
Thickness
150
150
150
180
180
180
150
150
150
150
150
150
150
150
180
180
195
195
150
150
150
150
180
275
275
275
290
290
290
275
275
275
275
275
275
275
275
290
290
320
320
275
275
275
275
290
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
1.0
1.2
1.4
1.6
2.0
2.0
2.0
2.0
2.6
2.77
3.2
3.2
3.6
3.73
4.78
7.47
19.0
F 21.3
F
F
F
0.952
0.952
1.22
1.26
1.45
1.45
1.6
1.62
1.95
2.56
0.444
0.527
0.608
0.687
0.839
0.839
0.852
1.020
0.370
0.438
0.504
0.568
0.691
0.691
kg/m
Mass
per
Metre
1.56
1.61
1.86
2.00
1.86
2.06
2.48
3.2
1.21
0.565
0.671
0.774
0.875
1.070
1.070
1.11
1.34
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.060
0.060
0.060
0.060
0.060
0.060
0.055
0.055
0.051
0.051
0.051
0.051
0.051
0.051
m2/m
cm2
0.471
0.558
0.643
0.724
0.880
0.880
Surface
Area
Area
of Section
Z
0.702
0.708
0.792
0.792
0.816
0.83
0.917
1.00
0.571
0.230
0.267
0.302
0.334
0.391
0.391
0.325
0.368
0.133
0.154
0.173
0.190
0.220
0.220
0.655
0.664
0.739
0.739
0.767
0.78
0.861
0.941
0.536
0.242
0.281
0.317
0.351
0.412
0.412
0.372
0.422
0.166
0.193
0.216
0.238
0.275
0.275
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.671
0.662
0.653
0.653
0.638
0.634
0.607
0.555
0.686
0.637
0.631
0.624
0.618
0.605
0.605
0.541
0.524
0.532
0.525
0.519
0.512
0.500
0.500
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
2.3
2.9
F 17.2
F
1.0
1.2
1.4
1.6
2.0
2.0
mm
mm
16.0
Thickness
Outside
Diameter
195
240
195
245
245
240
240
240
195
150
150
150
150
150
180
195
195
150
150
150
150
150
180
320
415
320
410
410
415
415
415
320
275
275
275
275
275
290
320
320
275
275
275
275
275
290
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
T&P
tube
and
pipe
71
72
2.87
2.87
3.91
5.56
7.82
2.0
2.0
2.3
2.3
2.6
2.6
3.2
3.6
26.7
26.9
1.23
1.23
1.40
1.40
1.56
1.58
1.9
2.07
1.68
1.68
2.19
2.89
3.63
0.602
0.716
0.829
0.939
1.154
1.462
1.61
1.75
2.97
0.523
0.622
0.718
0.813
0.997
kg/m
Mass
per
Metre
0.084
0.084
0.084
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
1.55
1.55
1.87
0.571
0.67
0.763
0.851
1.01
1.23
1.32
1.4
1.91
0.375
0.438
0.497
0.553
0.654
1.16
1.16
1.4
0.45
0.527
0.6
0.67
0.798
0.965
1.04
1.11
1.51
0.338
0.394
0.478
0.498
0.589
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
2.02
2.42
2.63
1.81
0.085
0.085
0.085
0.085
1.51
1.74
1.83
1.39
1.12
1.29
1.36
1.03
2.15
2.15
2.8
0.77
0.91
1.06
1.2
1.47
1.86
2.05
2.23
3.79
0.07
0.07
0.07
0.07
0.07
m2/m
cm2
0.66
0.792
0.915
1.04
1.27
Surface
Area
Area
of Section
0.866
0.847
0.833
0.875
0.849
0.849
0.817
0.863
0.857
0.85
0.843
0.83
0.811
0.802
0.793
0.711
0.75
0.744
0.737
0.73
0.718
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
1.0
1.2
1.4
1.6
2.0
2.6
2.9
3.2
6.3
25.4
1.0
1.2
1.4
1.6
2.0
mm
mm
22.2
Thickness
195
195
245
195
241
240
240
150
150
150
150
150
180
195
180
195
150
150
150
150
150
320
320
410
320
414
415
415
275
275
275
275
275
290
320
290
320
275
275
275
275
275
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
6.0
8.0
3.38
3.38
4.55
6.35
9.09
32.0
F 33.4
2.5
2.5
3.23
4.23
5.45
3.84
4.73
0.76
0.906
1.05
1.192
1.47
2.07
2.74
3.9
0.681
0.811
0.939
1.066
1.312
kg/m
Mass
per
Metre
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
1.15
1.35
1.56
1.74
2.09
2.78
3.44
4.35
0.827
0.971
1.11
1.24
1.49
0.722
0.851
0.973
1.09
1.31
1.75
2.17
2.74
0.578
0.679
0.776
0.868
1.04
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
3.19
3.19
4.13
5.4
0.105
0.105
0.105
0.105
3.64
3.64
4.4
5.21
2.18
2.18
2.63
3.12
0.966
1.15
1.34
1.52
1.87
2.63
3.5
5.05
0.09
0.09
0.09
0.09
0.09
m2/m
cm2
0.864
1.03
1.19
1.36
1.67
Surface
Area
Area
of Section
1.07
1.07
1.03
9.82
1.09
1.08
1.08
1.07
1.06
1.03
0.993
0.928
0.978
0.97
0.963
0.956
0.943
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
1.0
1.2
1.4
1.6
2.0
2.9
4.0
6.3
F 31.8
1.0
1.2
1.4
1.6
2.0
mm
mm
F 28.6
Thickness
Outside
Diameter
241
240
240
240
150
150
150
150
150
195
195
195
150
150
150
150
150
414
415
415
415
275
275
275
275
275
320
320
320
275
275
275
275
275
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
T&P
tube
and
pipe
73
74
0.913
1.089
1.264
1.436
1.776
2.51
4.93
5.5
8.0
10.0
1.0
1.2
1.4
1.6
2.0
2.9
6.3
36.0
F 38.0
cm2
Z
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.11
0.11
0.11
0.11
0.11
0.106
0.106
0.106
0.106
1.54
1.82
2.09
2.35
2.83
3.8
4.42
4.42
3.26
0.88
1.04
1.19
1.34
1.62
2.23
2.59
2.59
1.91
6.28
3.2
2.26
1.83
1.61
1.16
1.39
0.119
0.119
0.119
0.119
0.119
0.119
0.119
8.19
4.96
3.68
3.04
2.7
1.99
2.35
4.31
2.61
1.93
1.6
1.42
1.05
1.24
1.07
1.27
1.48
1.68
2.07
3.15
3.84
3.84
2.61
Surface
Area
Area
of Section
1.14
1.24
1.27
1.29
1.29
1.31
1.3
1.2
1.2
1.19
1.18
1.17
1.1
1.07
1.07
1.12
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
1.14
5.52
6.4
0.839
1.0
1.16
1.318
1.628
1.0
1.2
1.4
1.6
2.0
F 35.0
1.56
1.56
1.56
1.64
1.99
2.01
2.41
2.41
2.44
2.97
2.97
kg/m
2.0
2.0
2.0
2.0
2.6
2.6
3.2
3.2
3.2
4.0
4.0
mm
mm
Mass
per
Metre
F 33.7
Thickness
195
195
150
150
150
150
150
150
150
150
150
150
195
195
245
195
320
320
275
275
275
275
275
275
275
275
275
275
320
320
410
320
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
6.0
7.5
10.0
1.2
1.4
1.6
2.0
3.56
3.56
4.85
4.85
1.2
1.4
1.6
2.0
2.0
2.0
2.0
2.0
2.6
2.6
3.2
3.2
3.2
3.2
4.0
4.5
6.3
40.0
F 41.3
F
42.2
42.4
1.282
1.488
1.693
1.99
1.99
1.99
2.096
2.10
2.55
2.58
3.09
3.09
3.14
3.26
3.84
4.21
5.94
3.38
3.38
4.47
4.47
1.187
1.378
1.567
1.939
5.03
6.01
7.4
kg/m
Mass
per
Metre
cm2
0.14
0.14
0.14
0.133
0.133
0.133
0.133
0.13
0.13
0.13
0.13
3.83
4.4
4.97
8.13
8.13
10.09
10.09
3.04
3.5
3.93
4.78
1.72
1.98
2.23
3.85
3.85
4.78
4.78
1.47
1.69
1.91
2.31
4.05
4.15
4.95
5.36
7.56
3.34
2.67
0.133
0.14
0.133
0.133
0.14
0.133
0.14
7.99
8.91
9.42
9.76
14.17
6.78
6.04
3.73
4.0
4.4
4.6
6.37
3.16
2.72
1.63
1.89
2.16
4.32
4.32
5.69
5.69
1.51
1.75
1.99
2.47
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
Surface
Area
Area
of Section
1.41
1.46
1.38
1.35
1.37
1.43
1.5
1.53
1.52
1.52
1.37
1.37
1.33
1.33
1.42
1.41
1.4
1.39
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
mm
mm
Thickness
Outside
Diameter
195
195
195
245
195
195
150
150
150
150
241
240
241
240
150
150
150
150
320
320
320
410
320
320
275
275
275
275
414
415
414
415
275
275
275
275
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
T&P
tube
and
pipe
75
76
2.61
2.73
2.61
3.25
3.56
3.56
3.61
4.05
4.05
4.43
4.43
4.86
5.41
5.41
7.24
9.56
2.3
2.3
2.3
2.3
2.9
2.9
3.2
3.2
3.2
3.68
3.68
4.00
4.00
4.50
5.08
5.08
7.14
10.15
F 48.3
7.73
9.41
11.55
12.5
1.373
1.595
1.815
2.249
6.8
7.93
10.01
cm2
Z
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.15
0.15
0.15
0.15
4.71
5.43
6.12
7.46
1.98
2.28
2.57
3.14
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
0.152
16.33
16.33
15.01
14
14
12.93
12.93
11.8
10.09
6.76
6.76
6.21
5.8
5.8
5.35
5.35
4.88
4.51
6.9
6.9
6.19
5.66
5.66
5.16
5.16
4.61
4.21
1.75
2.03
2.31
2.87
Surface
Area
Area
of Section
1.54
1.54
1.56
1.57
1.57
1.58
1.58
1.6
1.61
1.64
1.63
1.63
1.61
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
50.0
2.61
2.61
1.2
1.4
1.6
2.0
47.6
6.5
8.5
12.5
45.0
kg/m
mm
mm
Mass
per
Metre
Thickness
240
241
245
195
195
240
241
195
195
150
150
150
150
415
414
410
320
320
415
414
320
320
275
275
275
275
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
1.2
1.4
1.6
2.0
2.6
3.2
3.25
6.3
12.5
1.2
1.4
1.6
2.0
2.6
8.0
10.0
14.0
1.2
1.4
1.6
2.0
2.6
2.9
3.2
6.3
51.0
F 54.0
F
56.0
F 57.0
F
1.652
1.920
2.186
2.713
3.488
3.869
4.247
7.880
9.82
11.71
14.49
1.563
1.816
2.068
2.565
3.296
1.471
1.713
1.949
2.417
3.104
3.77
3.827
6.94
11.9
kg/m
Mass
per
Metre
0.17
0.17
0.17
0.17
0.17
0.16
6.94
8.01
9.05
11.06
13.9
30.97
5.82
6.71
7.58
9.26
11.61
13.79
2.57
2.97
3.35
4.1
5.15
12.14
2.28
2.63
2.97
3.63
4.55
5.41
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
2.1
2.44
2.78
3.46
4.44
4.93
5.41
14.11
0.179
0.179
0.179
0.179
0.179
0.179
0.179
0.179
8.19
9.46
10.69
13.08
16.47
18.08
19.64
32.74
2.87
3.32
3.75
4.59
5.78
6.35
6.89
11.49
1.99
2.31
2.63
3.27
4.2
0.16
0.16
0.16
0.16
0.16
0.16
m2/m
cm2
1.88
2.18
2.48
3.08
3.96
4.8
0.16
0.16
15.11
Surface
Area
Area
of Section
1.97
1.97
1.96
1.95
1.93
1.92
1.91
1.81
1.87
1.86
1.85
1.84
1.82
1.43
1.76
1.75
1.75
1.73
1.71
1.69
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
mm
mm
Thickness
Outside
Diameter
150
150
150
150
150
195
195
195
150
150
150
150
150
150
150
150
150
150
195
235
275
275
275
275
275
320
320
320
275
275
275
275
275
275
275
275
275
275
320
410
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
T&P
tube
and
pipe
77
78
9.44
12.37
15.05
16.97
18.68
2.034
2.316
2.876
2.876
3.29
3.29
3.29
3.44
4.11
4.11
5.10
5.03
5.03
5.44
5.44
6.17
6.69
7.48
7.48
11.11
13.44
kg/m
Mass
per
Metre
11.24
12.72
15.58
15.58
3.73
4.22
5.17
5.17
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.189
0.189
0.189
0.189
0.189
0.189
0.189
0.189
27.66
27.66
30.80
32.97
36.09
36.09
21.90
26.20
9.18
9.18
10.20
10.94
11.97
11.97
7.27
8.70
6.93
6.93
7.84
8.53
9.53
9.53
5.31
6.51
0.189
0.189
0.189
0.189
m2/m
cm2
2.59
2.95
3.66
3.66
Surface
Area
Area
of Section
2.00
2.00
1.98
1.97
1.95
1.95
2.03
2.01
2.08
2.08
2.06
2.06
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
6.5
9.0
11.5
13.5
15.5
63.0
F
F
F
F
F
1.4
1.6
2.0
2.0
2.3
2.3
2.3
2.3
2.9
2.9
3.6
3.6
3.6
3.91
3.91
4.50
4.90
5.54
5.54
8.74
11.07
mm
mm
F 60.3
Thickness
241
240
195
245
241
240
195
195
150
150
150
350
414
415
320
410
414
415
320
320
275
275
275
430
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
5.16
5.16
7.01
7.5
9.5
12.5
15.0
17.5
71.0
F 73.0
75.0
13.34
15.90
19.87
22.87
25.54
8.62
8.62
11.41
12.18
16.15
19.14
21.82
23.72
2.699
3.354
4.32
12.200
9.03
1.844
2.144
2.443
3.034
4.760
8.890
15.700
kg/m
Mass
per
Metre
0.200
0.220
0.220
0.220
0.220
20.12
24.72
31.31
76.12
11.40
13.17
14.91
18.29
27.63
46.86
69.03
5.75
7.06
8.95
21.75
3.59
4.15
4.70
5.76
8.50
14.75
21.74
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.229
0.229
0.229
63.63
63.63
80.00
17.43
17.43
21.92
Please refer to Hollow tables on page 65
11.00
11.00
14.53
3.44
4.27
5.50
15.58
0.199
0.199
0.199
0.199
0.199
0.199
0.199
m2/m
cm2
2.35
2.73
3.11
3.86
6.06
11.33
20.02
Surface
Area
Area
of Section
2.41
2.41
2.35
2.41
2.41
2.38
2.21
2.20
2.20
2.19
2.18
2.13
2.03
1.86
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
7.5
10.5
13.0
15.5
17.5
70.0
6.4
1.6
2.0
2.6
8.0
F 63.6
1.2
1.4
1.6
2.0
3.2
6.3
12.5
mm
mm
F 63.5
F
Thickness
Outside
Diameter
241
240
240
150
150
150
235
150
150
150
150
195
195
235
414
415
415
275
275
275
410
275
275
275
275
320
320
410
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
T&P
tube
and
pipe
79
80
8.5
12.0
15.0
17.5
20.0
9.0
12.0
15.0
17.5
20.0
80.0
85.0
17.50
22.27
26.67
29.98
32.96
15.58
20.75
24.77
27.76
30.42
11.03
4.19
4.19
4.37
4.71
5.75
5.80
6.44
6.44
6.51
7.90
8.60
10.80
13.44
15.60
19.60
kg/m
Mass
per
Metre
cm2
0.239
0.239
0.239
0.239
0.239
0.239
0.239
0.239
55.00
65.00
69.78
84.82
101
112
131
49.70
14.40
17.10
18.34
22.29
26.43
29.55
34.47
13.00
8.34
10.10
10.96
13.82
17.11
19.88
24.98
7.45
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
Surface
Area
Area
of Section
2.57
2.54
2.53
2.48
2.42
2.39
2.29
2.58
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
6.4
F 76.3
F
F
F
F
F
F
2.3
2.3
2.3
2.6
3.2
3.2
3.6
3.6
3.6
4.5
4.9
6.3
8.0
9.5
12.5
mm
mm
F 76.1
Thickness
195
195
245
195
195
235
235
195
320
320
410
320
320
410
410
320
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
1.6
2.0
2.0
2.6
2.6
2.6
3.2
3.6
4.0
4.0
4.0
4.8
4.9
5.4
5.49
5.49
5.5
7.62
8.00
9.5
11.13
12.5
15.24
6.4
9.5
11.5
13.5
17.0
20.0
88.9
F 89.0
90.0
F
F
F
F
19.53
22.95
26.23
31.49
35.49
13.04
3.445
4.286
4.286
5.53
5.53
5.75
6.76
7.57
8.47
8.38
8.38
9.96
10.10
11.10
11.29
11.29
11.30
15.27
15.96
18.60
21.33
23.60
27.67
kg/m
Mass
per
Metre
0.279
0.279
88.00
97.70
41.82
51.57
51.57
19.77
22.00
9.41
11.60
11.60
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
9.65
10.80
0.279
0.279
0.279
m2/m
cm2
4.39
5.46
5.46
Surface
Area
Area
of Section
195
245
241
240
240
195
235
2.89
2.87
2.82
195
195
150
150
350
415
320
410
320
410
414
415
414
320
320
275
275
430
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
2.98
2.95
2.96
2.96
3.02
3.00
3.09
3.07
3.07
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
mm
mm
F
F
F
Thickness
Outside
Diameter
T&P
tube
and
pipe
81
82
10.0
13.0
14.0
16.0
19.5
22.5
10.0
12.5
14.5
18.5
22.0
1.6
2.0
2.6
3.6
6.3
8.0
9.5
12.5
10.5
13.0
17.5
21.5
25.0
11.0
13.5
16.0
20.5
24.5
95.0
100.0
101.6
106.0
112.0
29.06
33.88
39.04
47.63
54.37
26.18
30.78
39.34
46.10
51.34
3.946
4.913
6.348
8.70
14.80
18.50
21.58
27.48
23.06
27.84
31.51
38.28
43.52
21.67
27.08
28.80
32.08
37.33
41.31
kg/m
Mass
per
Metre
63.00
77.63
99.14
133.00
215.00
260.00
295.00
350.00
12.37
15.28
19.52
26.23
42.33
51.08
57.98
69.69
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.319
0.319
0.319
0.319
0.319
0.319
0.319
0.319
m2/m
cm2
5.02
6.26
8.09
11.08
18.86
23.52
27.49
34.99
Surface
Area
Area
of Section
3.53
3.52
3.50
3.47
3.38
3.32
3.27
3.18
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
mm
mm
F
F
F
Thickness
150
150
150
195
235
195
235
235
275
275
275
320
410
320
410
410
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
3.05
3.05
3.18
3.20
3.60
4.50
4.50
4.50
4.78
4.8
5.40
5.40
6.00
6.02
6.02
6.30
8.56
9.50
12.50
13.49
17.12
6.40
11.5
14.0
19.0
23.5
27.5
114.3
F 114.4
118.0
32.08
37.12
47.79
56.36
63.09
17.05
8.37
8.65
8.70
8.77
9.83
12.10
12.20
12.20
12.89
13.00
14.50
14.50
16.00
16.07
16.07
16.80
22.31
24.60
31.45
33.54
41.01
kg/m
Mass
per
Metre
0.359
233
171
40.80
30.01
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
16.44
0.359
247
43.23
Please refer to UltraPipe tables on page 91
18.40
0.359
274
47.90
18.40
0.359
274
47.90
Please refer to UltraPipe tables on page 91
20.48
0.359
301
52.68
20.48
0.359
301
52.68
21.38
0.359
313
54.72
28.43
0.359
400
70.00
31.27
0.359
433
75.75
39.98
0.359
526
91.98
15.40
0.359
m2/m
cm2
11.10
Surface
Area
Area
of Section
195
245
241
240
235
240
235
235
3.86
3.86
3.83
3.83
3.82
3.75
3.72
3.63
240
195
241
414
415
410
415
410
410
320
410
415
320
414
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
3.88
3.89
3.93
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
mm
mm
Thickness
Outside
Diameter
T&P
tube
and
pipe
83
84
F
F
14.0
17.0
20.0
25.0
30.0
3.18
6.55
6.55
9.53
140.0
141.3
10.80
21.78
21.78
30.94
45.20
53.27
61.01
73.01
83.71
16.2
17.0
17.0
19.7
39.2
56.56
39.65
49.72
59.23
69.95
78.48
18.8
27.5
35.3
36.68
42.05
47.82
58.57
67.12
kg/m
Mass
per
Metre
436
609
746
68.70
95.93
117.00
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.439
0.439
0.439
0.439
0.439
0.439
470
513
513
588
1020
1345
67.30
73.50
73.50
84.27
146
192
13.80
27.73
27.73
0.444
0.444
0.444
329
630
630
46.60
89.29
89.29
20.70
22.70
22.70
26.40
49.95
72.05
0.399
0.399
0.399
m2/m
cm2
23.89
35.07
44.96
Surface
Area
Area
of Section
4.88
4.77
4.77
4.77
4.75
4.75
4.72
4.52
4.32
4.27
4.17
4.07
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
4.88
5.40
5.40
6.30
12.50
19.00
6.30
9.50
12.50
F 127.0
F
F
139.7
12.5
15.0
17.5
22.5
27.0
125.0
13.0
17.0
21.0
26.0
30.5
mm
mm
132.0
Thickness
241
241
240
245
235
235
235
235
235
235
414
414
415
325
325
410
410
410
410
410
410
410
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
6.3
9.5
12.5
19.0
25.0
14.0
19.0
24.0
30.0
32.5
35.0
2.5
3.4
3.4
4.88
5.40
5.40
12.50
6.4
7.9
F 152.4
F
160.0
F 165.1
F 165.2
168.2
F
F
31.23
25.06
10.00
14.00
14.00
19.20
21.30
21.30
47.00
56.46
68.29
82.96
99.02
109.46
110.97
22.70
33.50
43.10
62.50
78.50
49.73
54.36
54.82
71.57
85.54
100.77
102.05
26.28
kg/m
Mass
per
Metre
cm2
Z
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.479
0.479
0.479
0.479
0.479
773
1093
1355
1807
2108
101
143
178
237
276
0.519
0.519
0.519
0.519
0.519
12.80
24.50
27.00
27.00
59.93
788
863
863
1756
422
95.50
104
104
213
51.10
28.91
42.65
54.93
80.00
100.00
Surface
Area
Area
of Section
5.67
5.65
5.65
5.41
5.75
5.17
5.06
4.96
4.76
4.59
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
12.5
14.0
16.0
22.0
27.5
33.0
35.0
150.0
7.9
mm
mm
F 142.8
Thickness
Outside
Diameter
245
235
350
235
235
235
235
235
325
325
410
410
430
410
410
410
410
410
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
T&P
tube
and
pipe
85
86
3.18
4.78
4.78
4.8
5.00
6.35
6.4
7.1
7.11
7.11
10.97
14.27
18.26
21.95
15.0
20.0
26.0
30.0
35.0
15.0
17.0
20.0
27.5
34.0
40.0
15.0
17.5
20.0
29.0
36.0
168.3
170.0
180.0
190.0
F
F
76.56
85.24
86.98
118.65
140.74
69.77
77.99
81.72
106.57
126.03
142.02
61.92
76.49
95.14
106.67
119.90
12.94
19.23
19.23
25.4
20.13
25.6
33.6
28.2
28.23
28.23
42.56
54.20
67.55
79.18
kg/m
Mass
per
Metre
cm2
Z
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.529
0.529
0.529
1170
1170
1690
139
139
201
36.00
36.00
54.20
16.49
0.529
562
66.8
24.55
0.529
821
97.6
24.55
0.529
821
97.6
Please refer to UltraPipe tables on page 91
25.65
0.529
856
102
32.60
0.529
1070
127
Please refer to UltraPipe tables on page 91
Surface
Area
Area
of Section
241
240
240
240
240
5.77
5.73
5.70
5.70
5.59
241
241
240
414
415
415
415
415
414
414
415
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
5.83
5.78
5.78
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
mm
mm
F
F
Thickness
tube
and
pipe
Outside
Diameter
T&P
3.0
4.0
4.78
4.8
6.35
6.35
6.4
8.18
8.18
8.2
12.70
12.70
18.26
4.78
6.35
6.35
9.27
9.27
12.70
15.09
4.8
6.4
9.3
12.7
F 219.1
273.0
273.1
31.8
42.1
60.5
81.6
31.56
41.77
41.77
60.29
60.29
81.54
95.97
16.00
21.1
25.21
25.4
33.31
33.31
33.6
42.53
42.53
42.6
64.30
64.30
90.42
92.25
129.62
32.7
55.9
kg/m
Mass
per
Metre
1814
2934
187
303
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
0.858
0.858
0.858
0.858
0.858
0.858
0.858
3623
4745
4745
6626
6626
8824
10200
265
347
347
485
485
646
747
Please refer to UltraPipe tables on page 91
40.28
53.20
53.20
76.70
76.70
104.0
122.0
20.40
0.688
1190
109
Please refer to UltraPipe tables on page 91
32.30
0.688
1860
169
Please refer to UltraPipe tables on page 91
42.44
0.688
2403
219
42.44
0.688
2403
219
Please refer to UltraPipe tables on page 91
54.20
0.688
3018
275
54.20
0.688
3018
275
Please refer to UltraPipe tables on page 91
82.60
0.688
4412
401
82.60
0.688
4412
401
0.608
0.608
m2/m
cm2
41.60
71.16
Surface
Area
Area
of Section
241
240
241
240
7.47
7.47
7.32
7.32
241
241
240
241
240
240
240
241
240
7.53
7.53
9.48
9.42
9.42
9.32
9.32
9.22
9.13
241
350
235
235
414
414
415
414
415
415
415
414
415
414
415
414
415
414
430
410
410
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
7.58
7.64
6.60
6.42
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
20.0
30.0
200.0
7.1
12.5
mm
mm
F 193.7
Thickness
Outside
Diameter
T&P
tube
and
pipe
87
88
6.4
9.5
9.53
9.53
12.7
12.7
6.35
6.4
9.5
9.53
9.53
12.7
6.4
9.5
12.7
6.35
9.35
355.6
406.4
457.0
6.4
9.5
12.7
323.9
71.1
105
139
79.17
117.06
93.21
63.1
93.0
93.0
62.62
123
63.1
93.0
81.1
81.18
107
107.38
50.1
73.7
97.5
131.90
37.53
49.40
49.40
61.69
73.70
73.70
79.65
kg/m
Mass
per
Metre
1.02
19790
6096
7989
7989
9809
11600
11600
12490
1220
377
494
494
606
717
717
771
cm3
I
cm4
Elastic
Modulus
Moment
of
Inertia
15500
871
1.28
23300
1150
118
1.12
103
168
1.02
1.02
1.02
1.02
1.02
1.02
1.02
m2/m
cm2
47.9
63.4
63.4
78.6
93.8
93.8
102
Surface
Area
Area
of Section
14.0
12.2
10.8
11.3
11.3
11.3
11.2
11.1
11.1
11.0
cm
Radius
of
Gyration
These items are not commonly stocked, they are available on request. Minimum order quantities may apply. Please contact your local Steel & Tube branch.
508.0
4.78
6.35
6.35
7.92
9.52
9.52
10.31
12.7
17.48
mm
mm
F 323.8
Thickness
240
240
240
241
241
240
240
241
240
240
415
415
415
414
414
415
415
414
415
415
MPa
min
min
MPa
Ultimate
Tensile
Strength
Yield
Stress
tube
and
pipe
Outside
Diameter
T&P
mm
mm
17.9
16.6
14.5
12.2
10.3
8.38
7.95
6.44
6.19
5.03
4.37
3.56
3.79
3.09
2.93
2.41
1.87
1.56
5.0 CHS
4.5 CHS
4.0 CHS
3.6 CHS
3.6 CHS
3.2 CHS
3.2 CHS
3.2 CHS
2.6 CHS
m2/t
0.0845
0.0845
0.106
0.106
0.133
0.133
0.152
0.152
0.189
0.189
0.239
0.239
0.279
0.279
0.359
0.359
0.439
0.439
0.519
54.2
45.2
44.0
36.1
43.1
35.2
42.6
34.7
37.6
30.6
37.1
30.1
33.3
27.0
29.5
24.8
26.4
24.5
26.3
24.4
m2/m
0.519
per t
per m
External
Surface Area
10.3
8.41
10.5
8.43
13.3
10.6
15.1
12.1
16.8
13.4
21.1
16.9
22.2
17.8
25.4
21.2
27.9
25.9
33.0
30.6
do
198
238
307
373
394
483
453
557
641
789
820
1010
1070
1320
1550
1850
2120
2280
2510
2710
mm2
Ag
Gross
Section
Area
0.0148
0.0170
0.0360
0.0419
0.0762
0.0899
0.116
0.138
0.259
0.309
0.540
0.651
0.963
1.16
2.34
2.75
4.81
5.14
8.07
8.65
106mm4
1.10
1.27
2.14
2.49
3.59
4.24
4.80
5.70
8.58
10.2
14.2
17.1
21.7
26.2
41.0
48.0
68.8
73.7
97.7
105
103mm3
1.54
1.81
2.99
3.55
4.93
5.92
6.52
7.87
11.6
14.0
18.9
23.1
28.9
35.2
54.3
64.1
90.8
97.4
128
138
103mm3
Properties
8.64
8.46
10.8
10.6
13.9
13.6
16.0
15.7
20.1
19.8
25.7
25.4
30.0
29.7
38.9
38.5
47.7
47.5
56.6
56.5
mm
0.0296
0.0341
0.0721
0.0838
0.152
0.180
0.232
0.275
0.517
0.618
1.08
1.30
1.93
2.33
4.69
5.49
9.61
10.3
16.1
17.3
106mm4
Torsion
Constant
2.20
2.53
4.28
4.97
7.19
8.48
9.59
11.4
17.2
20.5
28.4
34.2
43.3
52.4
82.0
96.1
138
147
195
209
103mm3
Torsion
Modulus
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
kf
Form
Factor
10.3
8.41
10.5
8.43
13.3
10.6
15.1
12.1
16.8
13.4
21.1
16.9
22.2
17.8
25.4
21.2
27.9
25.9
33.0
30.6
ls
(C,N,S)
1.54
1.81
2.99
3.55
4.93
5.92
6.52
7.87
11.6
14.0
18.9
23.1
28.9
35.2
54.3
64.1
90.8
97.4
128
138
103mm3
Compactness(3) Ze
Properties for
Design to AS 4100
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 250 MPa and design tensile strength fu = 320 MPa as per AS 4100 table 2.1 for AS 1163 grade
C250L0.
2. Grade C250L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
19.7
5.0 CHS
21.3
kg/m
Mass
per
metre
do
Designation
CHS
Circular
hollow
sections
89
90
0.189
0.152
0.133
0.106
0.0845
2.61
1.99
1.56
1.23
68.8
67.7
66.8
58.2
57.6
50.7
14.2
17.7
22.3
22.0
27.4
30.4
do
149
190
242
319
402
578
mm2
Af
Full
Section
Area
0.0117
0.0241
0.0497
0.0848
0.170
0.392
106mm4
0.872
1.43
2.34
3.51
5.63
10.3
103mm3
1.19
1.92
3.12
4.68
7.43
13.5
103mm3
8.86
11.3
14.3
16.3
20.6
26.0
0.0235
0.0482
0.0993
0.170
0.339
0.784
106mm4
Torsion
Constant
1.74
2.86
4.69
7.03
11.3
20.6
103mm3
Torsion
Modulus
149
190
242
319
402
578
mm
Ae
Effective
Section
Area
0.0117
0.0241
0.0497
0.0848
0.170
0.392
106mm4
Ie
1.09
1.79
2.93
4.39
7.03
12.9
103mm3
Ze
Effective Section
Properties
Notes:
1. In this table, the properties of these products are calculated in accordance with AS/NZS 4600 using design yield stress fy = 350 MPa and design tensile strength fu = 380 MPa.
2. Effective section properties are calculated in accordance with AS/NZS 4600.
3. All columns of the table (except for Mass per metre and External Surface Area per t) are calculated using design thicknesses of 1.1mm, 1.9mm, 2.2mm and 2.5mm rather
than the respective thicknesses t of 1.2mm, 2.0mm, 2.3mm and 2.6mm. This is to comply with clause 1.5.1.6 of AS/NZS 4600.
0.239
3.29
m2/t
m2/m
4.71
kg/m
per t
per m
External
Surface Area
mm
mm
Mass
per
metre
do
Designation
Circular
hollow
sections
Galtube
Plus
1790
1090
1970
1450
895
1490
1130
710
1230
939
601
862
647
441
312
N
N
N
C
N
N
C
N
N
C
C
N
C
C
N
N
67.3
100
44.8
59.9
88.9
39.2
52.4
77.8
35.7
47.7
70.9
30.1
41.1
59.7
79.7
1.00
0.904
1.00
1.00
0.960
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
2930
2010
3000
2300
1580
2260
1740
1200
1860
1430
994
1290
983
699
533
669
460
609
467
322
403
310
214
301
232
161
177
134
95.4
72.8
158
159
139
140
141
121
122
123
110
111
112
92.2
93.3
94.3
94.9
1900
1300
1970
1500
1020
1490
1140
781
1230
939
645
862
647
455
346
1460
1010
1500
1150
792
1130
871
602
930
717
497
646
492
349
267
334
230
305
233
161
201
155
107
151
116
80.5
88.3
67.1
47.7
36.4
13400
9060
15700
11800
8040
13700
10300
7020
12400
9380
6380
10400
7710
5360
4050
48.1
71.4
32.0
42.8
63.5
28.0
37.4
55.6
25.5
34.1
50.6
21.5
29.4
42.7
56.9
13.7
20.2
10.4
13.7
20.2
10.4
13.8
20.3
10.4
13.8
20.3
10.5
14.2
20.4
27.0
1.44
1.44
1.28
1.28
1.28
1.12
1.12
1.12
1.02
1.02
1.02
0.858
0.858
0.858
0.858
105
71.1
123
93.0
63.1
107
81.1
55.1
97.5
73.7
50.1
81.6
60.5
42.1
31.8
9.5 CHS
6.4 CHS
9.5 CHS
6.4 CHS
9.5 CHS
6.4 CHS
9.5 CHS
6.4 CHS
9.3 CHS
6.4 CHS
4.8 CHS
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for
AS 1163 grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
103mm3
2500
(C,N,S)
50.4
1.00
103mm3
3830
876
Compactness(3) Ze
106mm4
mm
ls
157
103mm3
kf
2510
103mm3
1920
106mm4
438
mm2
17700
Properties for
Design To AS 4100
36.0
Form
Factor
m2/t
Torsion
Modulus
10.3
Ag
Torsion
Constant
m2/m
do
Gross
Section
Area
1.44
kg/m
per t
per m
External
Surface Area
139
mm
mm
Mass
per
metre
Properties
do
Designation
UP
Ultrapipe
Circular
hollow
sections
91
92
About any axis
9.96
4.8 CHS
28.1
18.5
16.2
1270
1440
1.12
1.26
25.3
28.3
43.4
34.0
38.3
57.6
29.8
29.6
38.8
2.25
2.52
4.96
50.6
56.6
86.8
1.00
1.00
1.00
25.9
22.6
33.3
Notes:
1. This table is calculated in accordance with AS 4100 using design yield stress fy = 350 MPa and design tensile strength fu = 430 MPa as per AS 4100 table 2.1 for
AS 1163 grade C350L0.
2. Grade C350L0 is cold formed and therefore is allocated the CF residual stresses classification in AS 4100.
3. C = Compact Section; N = Non-compact Section; S = Slender Section; as defined in AS 4100.
0.279
24.7
2.48
34.0
38.3
57.6
70.4
0.279
1650
11.3
23.8
26.7
27.7
1.00
0.359
105
13.0
6.00
4.8 CHS
38.3
128
70.4
16.0
52.5
49.1
1.00
196
16.5
57.8
128
98.0
8.25
2470
35.1
27.3
0.529
19.4
4.8 CHS
3.00
168
C
36.8
1.00
254
21.4
57.3
168
127
10.7
3260
26.3
20.7
0.529
25.6
6.4 CHS
2040
185
C
33.2
1.00
278
23.4
57.0
185
139
11.7
3600
23.7
18.7
0.529
28.2
19.1
169
C
76.7
1.00
286
31.3
76.1
185
143
15.6
2700
54.8
32.4
0.688
21.2
4.0 CHS
22.4
210
N
63.9
1.00
339
37.1
75.8
220
169
18.6
3230
45.6
27.1
0.688
25.4
4.8 CHS
0.359
290
C
N
47.9
1.00
442
48.4
75.2
290
221
24.2
4280
34.2
20.5
0.688
33.6
6.4 CHS
103mm3
365
C
552
60.5
(C,N,S)
37.4
1.00
103mm3
106mm4
mm
74.6
103mm3
365
103mm3
Compactness(3) Ze
276
ls
30.3
kf
106mm4
mm2
5430
26.7
Properties for
Design to AS 4100
m2/t
Form
Factor
16.1
Torsion
Modulus
m2/m
Torsion
Constant
0.688
Ag
Properties
kg/m
do
Gross
Section
Area
42.6
mm
mm
per t
per m
External
Surface Area
do
Mass
per
metre
Ultrapipe
Circular
hollow
sections
Designation
UP
Gas
Combustible liquids
Flammable
Toxic
HHT*
Flammable
Toxic
HHT*
(includes steam and cryogenic)
Lethal
Fluid
Lethal
Liquid
Yes
Yes
Yes
Yes
Yes
10MPa (gas)
Yes (liquid)
Yes
10MPa
No
2A
Class
Yes
No
No
No
2P
Yes
Yes
Yes
2MPa
max
DN150
No
2
3
Example
Lethal fluids
Type
Fluid
Available in sizes from 88.9mm O.D. to 457.Omm O.D., UltraPipe is created using continuous cast steel strip of low carbon equivalent, which is joined
using the highfrequency electric resistance welding (HFERW) process.
This process produces a flawless, continuous longitudinal seam of unparalleled symmetry and strength.
UltraPipe is a straighter, rounder pipe of more consistent wall thickness, and it has a tighter bevel tolerance than required by most standards.
UP
Ultrapipe
Circular
hollow
sections
93
94
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.3
6.4
4.8
8.2
6.4
4.8
4.0
7.1
6.4
4.8
6.0
4.8
5.5
4.8
355.6
355.6
355.6
323.9
323.9
323.9
273.1
273.1
273.1
273.1
219.1
219.1
219.1
219.1
168.3
168.3
168.3
114.3
114.3
88.9
88.9
-45
-50
-45
-50
-35
-40
-50
-30
-40
-50
-50
-20
-25
-40
-50
-20
-25
-40
-20
-25
-40
-20
-25
-40
-20
-25
-40
MDMTC
21.5
18.6
18.1
14.3
14.4
12.9
9.6
12.7
9.8
7.3
6.1
15.9
11.5
7.8
5.9
13.3
9.9
6.6
12.1
9.0
6.0
10.5
7.8
5.2
9.3
6.9
4.6
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
21.5
18.6
18.1
14.3
14.4
12.9
9.6
12.7
9.8
7.3
6.1
15.9
11.5
7.8
5.9
13.3
9.9
6.6
12.1
9.0
6.0
10.5
7.8
5.2
9.3
6.9
4.6
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
21.5
18.6
18.1
14.3
14.4
12.9
9.6
12.7
9.8
7.3
6.1
15.9
11.5
7.8
5.9
13.3
9.9
6.6
12.1
9.0
6.0
10.5
7.8
5.2
9.3
6.9
4.6
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
21.5
18.6
18.1
14.3
14.4
12.9
9.6
12.7
9.8
7.3
6.1
15.9
11.5
7.8
5.9
13.3
9.9
6.6
12.1
9.0
6.0
10.5
7.8
5.2
9.3
6.9
4.6
Note 1: For other temperatures consult AS4041 for appropriate pressure ratings.
Note 2: MDMT = Material Design Minimum Temperature.
12.7
9.5
6.4
406.4
406.4
406.4
WT
12.7
9.5
6.4
OD
457.0
457.0
457.0
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
100C
156
0.925
1
1
Fluid 4
156
176
0.925 0.925
1
1
1
1
Fluid 3
176
0.925
1
1
156
0.925
1
1
Fluid 2
156
176
0.925 0.925
1
1
1
1
Fluid 1
176
0.925
1
1
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.3
6.4
4.8
8.2
6.4
4.8
4.0
7.1
6.4
4.8
6.0
4.8
5.5
4.8
355.6
355.6
355.6
323.9
323.9
323.9
273.1
273.1
273.1
273.1
219.1
219.1
219.1
219.1
168.3
168.3
168.3
114.3
114.3
88.9
88.9
-45
-50
-45
-50
-35
-40
-50
-30
-40
-50
-50
-20
-25
-40
-50
-20
-25
-40
-20
-25
-40
-20
-25
-40
-20
-25
-40
MDMTC
1
1
1
1
1
Maximum Operating Temperature
This class is
not suitable for
fluid 1
This class is
not suitable for
fluid 1
This class is
not suitable for
fluid 1
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
8.5
10.0
8.7
6.5
5.4
10.0
9.8
7.3
6.1
10.0
10.0
9.6
10.0
10.0
7.0
5.2
10.0
8.8
5.8
10.0
8.0
5.3
10.0
6.9
4.6
8.3
6.2
4.1
10.0
10.0
7.8
5.9
10.0
9.9
6.6
10.0
9.0
6.0
10.0
7.8
5.2
9.3
6.9
4.6
10.0
10.0
10.0
10.0
10.0
10.0
9.6
10.0
9.8
7.3
6.1
10.0
10.0
7.8
5.9
10.0
9.9
6.6
10.0
9.0
6.0
10.0
7.8
5.2
9.3
6.9
4.6
10.0
10.0
10.0
10.0
10.0
10.0
8.5
10.0
8.7
6.5
5.4
10.0
10.0
7.0
5.2
10.0
8.8
5.8
10.0
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
21.5
18.6
18.1
14.3
14.4
12.9
9.6
12.7
9.8
7.3
6.1
15.9
11.5
7.8
5.9
13.3
9.9
6.6
12.1
9.0
6.0
10.5
7.8
5.2
9.3
6.9
4.6
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
21.5
18.6
18.1
14.3
14.4
12.9
9.6
12.7
9.8
7.3
6.1
15.9
11.5
7.8
5.9
13.3
9.9
6.6
12.1
9.0
6.0
10.5
7.8
5.2
9.3
6.9
4.6
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
Ambient 100C Ambient 100C Ambient 100C Ambient 100C Ambient 100C
Note 1: For other temperatures consult AS4041 for appropriate pressure ratings.
Note 2: MDMT = Material Design Minimum Temperature.
12.7
9.5
6.4
406.4
406.4
406.4
WT
12.7
9.5
6.4
OD
457.0
457.0
457.0
Fluid 2
Fluid 3
Fluid 3
Fluid 4
Gas
Gas Liquid Liquid
176 156
176
156
176
156
176
156
176
156
0.925 0.925 0.925 0.925 0.925 0.925 0.925 0.925 0.925 0.925
1
1
1
1
1
1
1
1
1
1
Fluid 1
Ultrapipe
Circular
hollow
sections
UP
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.3
6.4
4.8
8.2
6.4
4.8
4.0
7.1
6.4
4.8
6.0
4.8
5.5
4.8
457.0
457.0
457.0
406.4
406.4
406.4
355.6
355.6
355.6
323.9
323.9
323.9
273.1
273.1
273.1
273.1
219.1
219.1
219.1
219.1
168.3
168.3
168.3
114.3
114.3
88.9
88.9
-45
-50
-45
-50
-35
-40
-50
-30
-40
-50
-50
-20
-25
-40
-50
-20
-25
-40
-20
-25
-40
-20
-25
-40
-20
-25
-40
MDMTC
99C
This class is
not suitable for
fluid 1
This class is
not suitable for
fluid 1
This class is
not suitable for
fluid 1
Ambient
156
0.925
1
1
Fluid 1
176
0.925
1
1
208
0.925
1
1
Fluid 3
176
0.925
1
1
99C
This class is
not suitable for
fluid 2
This class is
not suitable for
fluid 2
Ambient
99C
This class is
not suitable for
fluid 3
This class is
not suitable for
fluid 3
This class is
not suitable for
fluid 3
Ambient
156
0.925
1
1
Fluid 2
176
0.925
1
1
Note 1: For other temperatures consult AS4041 for appropriate pressure ratings.
Note 2: MDMT = Material Design Minimum Temperature.
WT
OD
25.4
22.0
21.4
16.9
17.0
15.3
11.3
15.0
11.6
8.7
7.2
18.8
13.6
9.3
6.9
15.7
11.7
7.8
14.3
10.6
7.1
12.5
9.2
6.2
11.0
8.2
5.5
Ambient
208
0.925
1
1
19.1
16.5
16.0
12.7
12.7
11.4
8.5
11.3
8.7
6.5
5.4
14.1
10.2
7.0
5.2
11.8
8.8
5.8
10.7
8.0
5.3
9.3
6.9
4.6
8.3
6.2
4.1
99C
156
0.925
1
1
Fluid 4
5.5
4.8
6.0
4.8
7.1
6.4
4.8
8.2
6.4
4.8
4.0
12.7
9.3
6.4
4.8
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.5
6.4
12.7
9.5
6.4
WT
-25
-30
-25
-30
-15
-20
-30
-10
-20
-30
-30
-0
-5
-20
-30
-0
-5
-20
-0
-5
-20
-0
-5
-20
-0
-5
-20
MDMTC
This class is
not suitable for
fluid 1
This class is
not suitable for
fluid 1
This class is
not suitable for
fluid 1
Ambient 100C
156
0.925
0.6
1
Fluid 1
176
0.925
0.6
1
156
0.925
0.6
1
Fluid 3
176
0.925
0.6
1
100C
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
This class is
only suitable for
168mm diameter
maximum in
fluid 2
Ambient
12.9
11.2
10.8
8.6
8.6
7.7
5.8
7.6
5.9
4.4
3.6
9.5
6.9
4.7
3.5
8.0
5.9
4.0
7.3
5.4
3.6
6.3
4.7
3.1
5.6
4.2
2.8
Ambient
11.4
9.9
9.6
7.6
7.6
6.9
5.1
6.8
5.2
3.9
3.2
8.5
6.1
4.2
3.1
7.1
5.3
3.5
6.4
4.8
3.2
5.6
4.2
2.8
5.0
3.7
2.5
100C
156
0.925
0.6
1
Fluid 2
176
0.925
0.6
1
Note 1: For other temperatures consult AS4041 for appropriate pressure ratings.
Note 2: MDMT = Material Design Minimum Temperature.
88.9
88.9
114.3
114.3
168.3
168.3
168.3
219.1
219.1
219.1
219.1
273.1
273.1
273.1
273.1
323.9
323.9
323.9
355.6
355.6
355.6
406.4
406.4
406.4
457.0
457.0
457.0
OD
12.9
11.2
10.8
8.6
8.6
7.7
5.8
7.6
5.9
4.4
3.6
9.5
6.9
4.7
3.5
8.0
5.9
4.0
7.3
5.4
3.6
6.3
4.7
3.1
5.6
4.2
2.8
Ambient
176
0.925
0.6
1
11.4
9.9
9.6
7.6
7.6
6.9
5.1
6.8
5.2
3.9
3.2
8.5
6.1
4.2
3.1
7.1
5.3
3.5
6.4
4.8
3.2
5.6
4.2
2.8
5.0
3.7
2.5
100C
156
0.925
0.6
1
Fluid 4
UP
Ultrapipe
Circular
hollow
sections
95
CCI
conversion
and
comparison
information
Useful Equivalents
One U.K. gallon
=
=
=
=
=
277.42 cubic in
0.160544 cubic ft
10 lb of water at 62F
4.54596 litre
1.20094 U.S. gallon
=
=
=
One litre
=
=
=
=
0.036047 lb
0.0036047 U.K. gallon
=
=
=
=
=
One lb of water
=
=
=
=
27.742 cubic in
0.10 U.K. gallon
0.120094 U.S. gallon
0.45359237 kilogramme
=
=
=
=
35.962 cubic ft
224 U.K. gallon
269.01056 U.S. gallon
1018.2950 litre
lbf
=
=
4.44822 N
.45393 kgf
=
=
0.22481 lbf
0.10197 kgf
kgf
=
=
2.20462 lbf
9.80665 N
=
=
=
=
=
=
lbf/in2
feet head
=
=
=
=
=
=
0.43353 lbf/in2
2.98907 kN/m2
0.2965 bars
0.03048 kgf/cm2
0.02950 atm
0.3048 metres head
kN/m2
=
=
=
=
=
=
0.14538 lbf/in2
0.334558 feet head
0.001 bars
0.0101972 kgf/cm2
0.0098694 atm
0.101972 metres head
bar
=
=
=
=
=
=
14.5038 lbf/in2
33.4558 feet head
100 kN/m2
1.01972 kgf/cm2
0.98694 atm
10.1972 metres head
kgf/cm2
=
=
=
=
=
=
14.2233 lbf/in2
32.8084 feet head
0.0098067 kN/m2
0.98067 bars
0.96784 atm
10 metres head
atm
=
=
=
=
=
=
14.6959 lbf/in2
33.8986 feet head
101.325 kN/m2
1.01325 bars
1.03323 kgf/cm2
10.3323 metres head
tonf/in2
=
=
=
15.4443 MN/m2
1.54443 h bars
1.57488 kgf/mm2
MN/m2
=
=
=
0.064749 tonf/in2
0.1 h bars
0.101972 kgf/mm2
h bar
=
=
=
0.64749 tonf/in2
10 MN/m2
1.01972 kgf/mm2
Conversion Factors
To calculate the mass of steel:
Round
dia. mm2 x 0.006165
Hexagon
size mm2 x 0.006798
Square
thickness mm2 x 0.00785
Flat
width in mm x thickness in mm x 0.00785
96
= kg per metre
= kg per metre
= kg per metre
= kg per metre
Force
Mass
kilonewton
tonne
short ton US
tonne
ton
kilonewton
ton
newton
kilogram
hundredweight
ton force
kilogram
pound force
gram
pound
cubic metre
cubic yard
ounce
cubic millimetre
cubic metre
cubic inch
cubic foot
Volume
litre
square metre
gallon (UK)
square metre
square yard
kilometre
mile
square foot
metre
mile
square millimetre
metre
yard
square millimetre
metre
foot
square inch
millimetre
square foot
millimetre
foot
Imperial
inch
Liquid
Area
Length
Unit
1 kip = 4.448 kN
1 tonf = 9.964 kN
1 lbf = 4.448 N
1 ton = 1016 kg
1 cwt = 50.80 kg
1 lb = 0.4536 kg
1 oz = 28.35 g
1 yd3 = 0.7646 m3
1 ft3 = 0.02832 m3
1 yd2 = 0.8361 m2
1 ft2 = 0.09290 m2
1 mile = 1.609 km
1 mile = 1609 m
1 yd = 0.9144 m
1 ft = 0.3048 m
1 ft = 304.8 mm
1 in = 25.40 mm
CCI
conversion
and
comparison
information
97
98
kilogram per cubic metre
kilogram per cubic metre
watt
watt
watt
horsepower
Power
Velocity
joules
foot pounds-force
Energy
millimetre4
inch4
kilonewton metre
kilonewton metre
millimetre3
newton metre
inch3
newton metre
Modulus of Section
Moment of Force
(Torque)
1 ft lbf = 1.356 J
1 Btu/h = 0.2931 W
1 hp = 754.7 W
1 ft lbf/s = 1.356 W
1 ton ft = 3.037 kN m
1 kip in = 0.113 kN m
1 lbf ft = 1.356 N m
1 lbf in = 0.113 N m
conversion
and
comparison
information
CCI
Force
Mass
1 kN = 0.2248 kip
1 kgf = 9.807 N*
1 N = 0.1020 kgf*
1 kN = 0.1004 tonf
kilogram force-newton*
1 N = 0.2248 lbf
kilonewton
tonne
short ton US
1 kg = 0.0009842 ton
tonne
ton
1 kg = 0.01968 cwt
kilonewton
ton
1 kg = 2.205 lb
newton
kilogram
hundredweight
1 g = 0.03527 oz
1 m3 = 1.308 yd3
1 m3 = 35.31 ft3
1 m2 = 1.196 yd2
1 m2 = 10.76 ft2
1 km = 0.6214 mile
1 m = 0.0006214 mile
1 m = 1.094 yd
1 m = 3.281 ft
1 mm = 0.003281 ft
1 mm = 0.03937 in
ton force
kilogram
Metric
pound force
gram
pound
cubic metre
cubic yard
ounce
cubic millimetre
cubic metre
cubic inch
cubic foot
Volume
litre
square metre
square yard
gallon (UK)
square metre
kilometre
mile
square foot
metre
mile
square millimetre
metre
yard
square millimetre
metre
foot
square foot
millimetre
square inch
millimetre
foot
Imperial
inch
Liquid
Area
Length
Unit
CCI
conversion
and
comparison
information
99
100
kilogram per cubic metre
kilogram per cubic metre
horsepower
Power
Velocity
foot pounds-force
Energy
millimetre4
inch4
kilonewton metre
millimetre3
kilonewton metre
inch3
1 kN m = 0.3293 tonf ft
1 kgf m = 9.807 N m*
1 N m = 0.102 kgf m*
newton metre
1 J = 0.7376 ft lbf
1 W = 3.412 Btu/h
1 W = 0.001341 hp
1 W = 0.7376 ft lbf/s
1 kN m = 8.851 kip in
1 N m = 0.7376 lbf ft
newton metre
1 N m = 8.851 lbf in
Modulus of Section
Moment of Force
(Torque)
conversion
and
comparison
information
CCI
CCI
German
Mat. No
Saarstahl
Grade
Rochling
AISI
BS
4659
BS 970
Part1
JIS
High
1.3243
1.3243
GIANT M5 CO M35
BM35
SKH 55
Speed
1.3247
1.3247
GIANT 101
M42
BM42
SKH 59
Steels
1.3343
1.3343
GIANT M5
M2
BM2
SKH 51
Hot
1.2343
1.2343
RDC 2
H11
BH11
SKD 6
Work
1.2344
1.2344
RDC 2 V
H13
BH13
SKD 61
Steels
1.2714
1.2714
RGS 4
L6
Plastic
1.2083
1.2083
Mould
1.2311
1.2311
MFR
P20
Steels
1.2312
1.2312
MOULREX-A
P20+S
1.2738
1.2738
1.2316
1.2316
BP 42
Cold
1.2080
1.2080
RCCO
D3
BD3
Work
1.2379
1.2379
RCC SUPRA
D2
BD2
Steels
1.2436
1.2436
RCC EXTRA
D6
1.2510
1.2510
RUS 3
01
1.2767
1.2767
RABW
1.2842
1.2842
RUS
02
1.2363
1.2363
RKCM
A2
BA2
1.2550
1.2550
RTWK
S1
BS1
Engi-
1.1191
1.1191
R4
1045
EN8D
060A45
S45C
neering
1.1203
1.1203
R5
1055
EN9
070M55
S55C
708A30
SCM430
1.7225
1.7225
MO 40
708M40
SCM440
708H45
SCM445H
EN24
817M40
SNCM439
EN25
826M31
EN36A
655M13
SNC815
EN39B
835M15
SNCM815
EN362
805A22
SNCM220
EN30B
EN19A
4145H
Case
4340
8407
W300
W500
THYROPLAST 2083
M310
THYROPLAST 2311
M201
HOLDAX
THYROPLAST 2312
M200
SKD 1
XW5
THYRODUR 2080
K100
SKD 11
XW41
THYRODUR 2379
K110
SKD 2
XW5
SKS 3
DF2
835M30
K107
THYRODUR 2510
K460
THYRODUR 2767
K600
SKD 12
XW10
THYRODUR 2343
K305
M4
THYRODUR 2550
K455
V945
760
V340
V320
709
V155
705
1.6582
1.6582
1.6580
1.6580
1.5752
1.5752
RAE 3
3415
1.6523
1.6523
MONIX E
8620
1.7131
1.7131
EC 80
E410
1.7147
1.7147
EC 100
E401
Hardening
S600
THYRAPID 3343
K720
4130
MONIX 15
S500
HSP 41
BP20
B01
Bohler/
VEW
S705
SUS420J1 STAVAX
P20+Ni
4140
Thyssen
SKS 51
420S29
420
Steels
ASSAB
conversion
and
comparison
information
THYSSEN 6580
V145
E200
E115
101
CCI
conversion
and
comparison
information
Hardness Testing
The hardness of a given material is generally defined as the resistance it shows to penetration by a test body
of defined shape. It can be measured with testing equipment of different design, the most common types
being Brinell, Rockwell and Vickers.
Brinell hardness and Vickers hardness are expressed by the quotient of load and surface area of indentation.
The hardness numbers for Brinell and Vickers hardness are not affected by the introduction of Newton as unit
of force. It has been internationally agreed to simply multiply the load with the factor 0.102.
Example:
Old New
F
F
HB = A
HB = 0.102 A
Load
F in kp
Load F in N
Surface area of permanent indentation A in mm2
The following comparison of hardness tables are based on DIN 50 150 of December 1976. Values in bold face
correspond exactly to DIN values. The other values are interpolated. Values in parenthesis are values outside
the defined range of standardised hardness testing procedures. Also, Brinell hardness numbers in parenthesis
apply only when testing with carbide ball.
The tables cover only hot formed or heat treated, unalloyed or low alloy steels and steel castings.
Interconversion of hardness numbers or conversion of hardness numbers to tensile strength values is subject
to error and should only be employed when prescribed testing procedure is not applicable.
(Tests carried by Verein Deutscher Eisenhttenleute [VDEh] showed a scatter range for the conversion of
Vickers hardness numbers to tensile strength values of 25 HV 10 or 85 N/mm2.)
Comparison of Hardness
Ball
indentation
diameter1
mm
Brinell
hardness2
N/mm2
Vickers
hardness
(F > 98 N)
HV
200
210
220
63
65
69
7.32
7.22
7.04
60
62
66
225
230
240
70
72
75
6.99
6.95
6.82
67
68
71
250
255
260
79
80
82
6.67
6.63
6.56
75
76
78
270
280
285
85
88
90
6.45
6.35
6.28
81
84
86
41
45
48
290
300
305
91
94
95
6.25
6.19
6.16
87
89
90
49
51
52
310
320
330
97
100
103
6.10
6.01
5.93
92
95
98
54
56
58
Tensile
strength
102
HB
Rockwell hardness
HRB
HRC
CCI
Tensile
strength
N/mm2
Vickers
hardness
(F > 98 N)
HV
Ball
indentation
diameter1
mm
Brinell
hardness2
HB
Rockwell hardness
HRB
335
340
350
105
107
110
5.87
5.83
5.75
100
102
105
59
60
62
360
370
380
113
115
119
5.70
5.66
5.57
107
109
113
63.5
64.5
66
385
390
400
120
122
125
5.54
5.50
5.44
114
116
119
67
67.5
69
410
415
420
128
130
132
5.38
5.33
5.32
122
124
125
70
71
72
430
440
450
135
138
140
5.26
5.20
5.17
128
131
133
73
74
75
460
465
470
143
145
147
5.11
5.08
5.05
136
138
140
76.5
77
77.5
480
490
495
150
153
155
5.00
4.96
4.93
143
145
147
78.5
79.5
80
500
510
520
157
160
163
4.90
4.86
4.81
149
152
155
81
81.5
82.5
530
540
545
165
168
170
4.78
4.74
4.71
157
160
162
83
84.5
85
550
560
570
172
175
178
4.70
4.66
4.62
163
166
169
85.5
86
86.5
575
580
590
180
181
184
4.59
4.58
4.54
171
172
175
87
595
600
610
185
187
190
4.53
4.51
4.47
176
178
181
620
625
630
193
195
197
4.44
4.43
4.40
184
185
187
90
640
650
660
200
203
205
4.37
4.34
4.32
190
193
195
91.5
92
92.5
670
675
680
208
210
212
4.29
4.27
4.25
198
199
201
93
93.5
HRC
conversion
and
comparison
information
88
89
89.5
91
103
CCI
conversion
and
comparison
information
Tensile
strength
N/mm2
104
Vickers
hardness
(F > 98 N)
HV
Ball
indentation
diameter1
mm
Brinell
hardness2
HB
Rockwell hardness
HRB
HRC
690
700
705
215
219
220
4.22
4.19
4.18
204
208
209
94
710
720
730
222
225
228
4.16
4.13
4.11
211
214
216
95.5
96
740
750
755
230
233
235
4.08
4.07
4.05
219
221
223
96.5
97
760
770
780
237
240
243
4.03
4.01
3.98
225
228
231
97.5
98
785
790
800
245
247
250
3.97
3.95
3.93
223
235
238
810
820
830
253
255
258
3.91
3.89
3.87
240
242
245
835
840
850
260
262
265
3.85
3.84
3.82
247
249
252
24
860
865
870
268
270
272
3.80
3.78
3.77
255
257
258
25
880
890
900
275
278
280
3.76
3.74
3.72
261
264
266
27
910
915
920
283
285
287
3.70
3.69
3.68
269
271
273
28
930
940
950
290
293
295
3.66
3.64
3.63
276
278
280
960
965
970
299
300
302
3.61
3.60
3.59
284
285
287
30
980
990
995
305
308
310
3.57
3.55
3.54
290
293
295
31
1000
1010
1020
311
314
317
3.53
3.52
3.50
296
299
301
32
1030
1040
1050
320
323
327
3.49
3.47
3.45
304
307
311
33
95
21
99
99.5
22
23
26
29
CCI
Tensile
strength
N/mm2
Vickers
hardness
(F > 98 N)
HV
Ball
indentation
diameter1
mm
Brinell
hardness2
HB
Rockwell hardness
HRB
HRC
1060
1070
1080
330
333
336
3.44
3.43
3.41
314
316
319
1090
1095
1100
339
340
342
3.40
3.39
3.38
322
323
325
1110
1120
1125
345
349
350
3.36
3.35
3.34
328
332
333
1130
1140
1150
352
355
358
3.33
3.32
3.31
334
337
340
1155
1160
1170
360
361
364
3.30
3.29
3.28
342
343
346
37
1180
1190
1200
367
370
373
3.26
3.25
3.24
349
352
354
38
1210
1220
1230
376
380
382
3.23
3.21
3.20
357
361
363
39
1240
1250
1255
385
388
390
3.19
3.18
3.17
366
369
371
1260
1270
1280
392
394
397
3.16
3.14
372
374
377
1290
1300
1310
400
403
407
3.13
3.12
3.10
380
383
387
41
1320
1330
1340
410
413
417
3.09
3.08
3.07
390
393
396
42
1350
1360
1370
420
423
426
3.06
3.05
3.04
399
402
405
43
1380
1385
1390
429
430
431
3.02
408
409
410
1400
1410
1420
434
437
440
3.01
3.00
2.99
413
415
418
1430
1440
1450
443
446
449
2.98
2.97
2.96
421
424
427
conversion
and
comparison
information
34
35
36
40
44
45
105
CCI
conversion
and
comparison
information
Tensile
strength
N/mm2
106
Vickers
hardness
(F > 98 N)
HV
Ball
indentation
diameter1
mm
Brinell
hardness2
HB
1455
1460
1470
450
452
455
1480
1485
1490
458
460
461
2.93
2.92
435
437
438
1500
1510
1520
464
467
470
2.91
2.90
2.89
441
444
447
1530
1540
1550
473
476
479
2.88
2.87
449
452
455
1555
1560
1570
480
481
484
2.86
2.85
(456)
(457)
(460)
1580
1590
1595
486
489
490
2.84
2.83
(462)
(465)
(466)
1600
1610
1620
491
494
497
1630
1640
1650
500
503
506
1660
1665
1670
509
510
511
2.78
(483)
(485)
(486)
1680
1690
1700
514
517
520
2.77
2.76
2.75
(488)
(491)
(494)
1710
1720
1730
522
525
527
2.74
(496)
(499)
(501)
1740
1750
1760
530
533
536
2.73
2.71
2.71
(504)
(506)
(509)
1770
1775
1780
539
540
541
2.70
(512)
(513)
(514)
1790
1800
1810
544
547
550
2.69
1820
1830
1840
553
556
559
2.67
1845
1850
1860
560
561
564
2.95
2.94
2.82
2.80
2.79
2.68
2.66
2.65
2
Rockwell hardness
HRB
HRC
428
429
432
(467)
(470)
(472)
46
47
48
49
(475)
(478)
(481)
(517)
(520)
(523)
50
51
52
(525)
(528)
(531)
(532)
(533)
(536)
53
CCI
Tensile
strength
N/mm2
Vickers
hardness
(F > 98 N)
HV
Ball
indentation
diameter1
mm
Brinell
hardness2
HB
1870
1880
1890
567
570
572
2.64
1900
1910
1920
575
578
580
2.62
1930
1940
1950
583
586
589
2.60
1955
1960
1970
590
591
594
1980
1990
1995
596
599
600
2000
2010
2020
602
605
607
2030
2040
2050
610
613
615
2060
2070
2080
618
620
623
2090
2100
2105
626
629
630
2.51
(595)
(598)
(599)
2110
2120
2130
631
634
636
2.50
(600)
(602)
(604)
2140
2145
2150
639
640
641
2.49
(607)
(608)
(609)
2160
2170
2180
644
647
650
2.48
2.47
(621)
(615)
(618)
2190
2200
653
655
675
2.63
2.61
(546)
(549)
(551)
(554)
(557)
(560)
2.58
(561)
(562)
(564)
2.56
2.55
2.54
2.53
2.52
2.46
HRB
HRC
(539)
(542)
(543)
2.59
2.57
Rockwell hardness
(567)
(569)
(570)
54
55
(572)
(575)
(577)
(580)
(582)
(584)
56
(587)
(589)
(592)
(620)
(622)
57
58
59
698
720
745
60
61
62
773
800
829
63
64
65
864
900
940
66
67
68
conversion
and
comparison
information
107
CCI
conversion
and
comparison
information
Tensile Testing
The following information on this basic testing procedure takes into account all changes
resulting from internationally approved ISO recommendations which have been incorporated
into a number of national standards.
ISO 6892
EU 2
DIN 50145
BS 18/Part 2
NFA 03-151
UNI 55612
JIS Z2201
108
Symbol
Designation
old
Unit
d0
d0
mm
Modulus of elasticity
N/mm2 (MPa)
Load
Fm
Pmax
Maximum load
L0
L0
mm
Lu
LB
mm
Rp
e.g. Rp0.2
s
s0.2
N/mm2 (MPa)
ReH
sSo
N/mm2 (MPa)
ReL
sSu
N/mm2 (MPa)
Rm
sB
Tensile strength
N/mm2 (MPa)
So
Fo
mm2
Su
FB
mm2
Reduction of area
Elongation
ee
eel
Elastic elongation
ep
Non-proportional elongation
er
ebl
Permanent elongation
et
eges
Total elongation
Stress
(nominal stress)
N/mm2 (MPa)
CCI
conversion
and
comparison
information
Stress
Stress (nominal stress) is defined as load, at any moment during the test, divided by the original
crosssectional area.
F
2
= S o [N/mm ]
Tensile strength Rm
Tensile strength is defined as stress corresponding to the maximum load divided by the original
cross-sectional area of the specimen.
Fm
2
R
m = So [N/mm ]
Quotient of load F divided by the original cross-sectional area So and extension Le divided by
extensometer gauge length LE0 in the rank of elastic deformation
Em = F .LE0 = m . 100
So .Le e
109
CCI
conversion
and
comparison
information
110
1 kp = 9.806 65 N
4
1 in = 0.025 4 m
6
0
10
20
30
40
68.95
137.90
206.84
275.79
6.90
75.84
144.79
213.74
282.69
13.79
82.74
151.69
220.60
289.58
20.68
89.63
158.58
227.53
296.48
27.58
96.53
165.47
234.42
303.37
34.47
103.42
172.37
241.32
310.26
41.37
110.32
176.26
248.21
317.16
48.26
117.21
186.16
255.11
324.05
55.16
124.11
193.0
262.00
330.95
62.05
131.00
199.95
268.90
337.84
50
60
70
80
90
344.74
413.69
482.63
551.58
620.53
351.63
420.58
489.53
558.48
627.42
358.53
427.48
496.48
565.37
634.32
365.42
434.47
503.32
572.27
641.21
372.32
441.26
510.21
579.16
648.11
379.21
448.16
517.11
586.05
655.00
386.11
455.05
524.00
592.95
661.90
393.00
461.95
530.90
599.84
668.79
399.90
468.84
537.79
606.74
675.69
406.79
475.74
544.69
613.63
682.58
100
110
120
130
140
689.48
758.43
827.37
896.32
965.27
696.37
765.32
834.27
903.21
972.16
703.27
772.21
841.16
910.11
979.06
710.16
779.11
848.06
917.00
985.95
717.06
786.00
854.95
923.90
992.85
723.95
792.90
861.85
930.79
999.74
730.84
799.79
868.74
937.69
1006.63
737.74
806.69
875.63
944.85
1013.53
744.63
813.58
882.53
951.48
1020.42
751.53
820.48
889.42
958.37
1027.32
150
160
170
180
190
1034.21
1103.16
1172.11
1241.06
1310.00
1041.11
1110.06
1179.00
1247.95
1316.90
1048.00
1116.65
1185.90
1254.85
1323.79
1054.90
1123.85
1192.79
1261.74
1330.69
1061.79
1130.74
1199.69
1268.64
1337.58
1068.69
1137.63
1206.58
1275.53
1344.48
1075.58
1144.53
1213.48
1282.42
1351.37
1082.48
1151.42
1220.37
1289.32
1358.27
1089.37
1158.32
1227.27
1296.21
1365.16
1096.27
1165.21
1234.16
1303.11
1372.06
200
210
220
230
240
1378.95
1447.90
1516.85
1585.79
1654.74
1385.85
1454.74
1523.74
1592.69
1661.64
1392.74
1461.69
1530.64
1599.58
1668.53
1399.64
1648.58
1537.53
1606.48
1675.43
1406.53
1475.48
1544.43
1613.37
1682.32
1413.43
1482.37
1551.32
1620.27
1689.22
1420.32
1489.27
1558.22
1627.16
1696.11
1427.21
1496.16
1565.11
1634.06
1703.01
1434.11
1503.06
1572.00
1640.95
1709.90
1441.00
1509.95
1578.90
1647.85
1716.79
250
260
270
280
290
1723.69
1792.64
1861.58
1930.53
1999.48
1730.58
1799.53
1868.48
1937.43
2006.37
1737.48
1806.43
1875.37
1944.32
2013.27
1744.37
1813.32
1882.27
1951.22
2020.16
1751.27
1820.22
1889.16
1958.11
2027.06
1758.16
1827.11
1896.06
1965.01
2033.95
1765.06
1834.01
1902.95
1971.90
2040.85
1771.95
1840.90
1909.85
1978.80
2047.74
1778.85
1847.79
1916.47
1985.69
2054.64
1785.74
1854.69
1923.64
1992.58
2061.53
300
310
320
330
340
2068.43
2137.37
2206.32
2275.27
2344.22
2075.32
2144.27
2213.22
2282.16
2351.11
2082.22
2151.16
2220.11
2289.06
2358.01
2089.11
2158.06
2227.01
2295.95
2364.90
2096.01
2164.95
2233.90
2302.85
2371.80
2102.90
2171.85
2240.80
2309.74
2378.69
2109.80
2178.74
2247.69
2316.64
2385.59
2116.69
2185.64
2254.59
2323.53
2392.48
2123.59
2192.53
2261.48
2330.43
2399.38
2130.48
2199.43
2268.38
2337.32
2406.37
350
360
370
380
390
2413.17
2482.11
2551.06
2620.01
2688.96
2420.06
2489.01
2557.95
2626.90
2695.85
2426.95
2495.90
2564.85
2633.80
2702.74
2433.85
2502.80
2571.74
2640.69
2709.64
2440.74
2509.69
2578.64
2647.59
2716.53
2447.64
2516.59
2585.53
2654.48
2723.43
2454.53
2523.48
2592.43
2661.38
2730.32
2461.43
2530.38
2599.32
2668.27
2737.22
2468.32
2537.27
2606.22
2675.17
2744.11
2475.22
2544.17
2613.11
2682.06
2751.01
400
410
420
430
440
2757.90
2826.85
2895.80
2964.75
3033.69
2764.80
2833.75
2902.69
2971.64
3940.59
2771.69
2840.64
2909.59
2978.54
3047.48
2778.59
2847.53
2916.48
2985.43
3054.38
2785.48
2854.43
2923.38
2992.32
3061.27
2792.38
2861.32
2930.27
2999.22
3068.17
2799.27
2868.22
2937.17
3006.11
3075.06
2806.17
2875.11
2944.06
3013.01
3081.96
2813.06
2882.01
2950.96
3019.90
3088.85
2819.96
2888.90
2957.85
3026.80
3095.75
450
460
470
480
490
3102.64
3171.59
3240.54
3309.48
3378.43
3109.54
3148.78
3247.43
3316.38
3385.33
3116.43
3185.38
3254.33
3323.27
3392.22
3123.33
3192.27
3261.22
3330.17
3399.12
3130.22
3199.17
3268.11
3337.06
3406.01
3137.11
3206.06
3275.01
3343.96
3412.90
3144.01
3212.96
3281.90
3350.85
3419.80
3150.90
3219.85
3288.50
3357.75
3426.69
3157.80
3226.75
3295.69
3364.64
3433.59
3164.69
3233.64
3302.59
3371.54
3440.48
500
3447.38
3454.27
3461.17
3468.06
3474.96
3481.85
3488.75
3495.64
3502.54
3509.43
CCI
conversion
and
comparison
information
1 kp = 9.806 65 N
1 in = 0.0254 m
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0
1
2
3
4
15.444
30.889
46.333
61.777
1.544
16.989
32.433
47.877
63.322
3.089
18.533
33.977
49.422
64.866
4.633
20.078
35.522
50.966
66.410
6.178
21.622
37.066
52.511
67.955
7.722
23.166
38.611
54.055
69.499
9.267
24.711
40.155
55.599
71.044
10.811
26.255
41.700
57.144
72.588
12.355
27.800
43.244
58.688
74.132
13.900
29.344
44.788
60.233
75.677
5
6
7
8
9
77.221
92.666
108.110
123.554
138.998
78.766
94.210
109.654
125.098
140.543
80.310
95.754
111.199
126.643
142.087
81.855
97.299
112.743
128.187
143.632
83.399
98.943
114.287
129.732
145.176
84.943
100.388
115.832
131.276
146.720
86.488
101.932
117.376
132.821
148.265
88.032
103.477
118.921
134.365
149.809
89.577
105.021
120.465
135.909
151.354
91.121
106.565
122.010
137.454
152.898
10
11
12
13
14
154.443
169.887
185.331
200.775
216.220
155.987
171.431
186.876
202.320
217.764
157.531
172.976
188.420
203.864
219.308
159.076
174.520
189.964
205.409
220.853
160.620
176.065
191.509
206.953
222.397
162.165
177.609
193.053
208.497
223.942
163.709
179.153
194.598
210.042
225.486
165.254
180.698
196.142
211.586
227.031
166.798
182.242
197.686
213.313
228.575
168.342
183.787
199.231
214.675
230.119
15
16
17
18
19
231.664
247.108
262.552
277.997
293.441
233.208
248.635
264.097
279.541
294.985
234.753
250.197
265.641
281.085
296.530
236.297
251.741
267.186
282.630
298.074
237.824
253.286
268.730
284.174
299.619
239.386
254.830
270.274
285.719
301.163
240.930
256.375
271.819
287.263
302.707
242.475
257.919
273.363
288.808
304.252
244.019
259.464
274.908
290.352
305.796
245.564
261.008
276.452
291.896
307.341
20
21
22
23
24
308.885
324.329
339.774
355.218
370.662
310.430
325.874
341.318
356.762
372.207
311.974
327.418
342.862
358.307
373.751
313.518
328.963
344.407
359.851
375.295
315.063
330.507
345.951
361.396
376.840
316.607
332.052
347.496
362.940
378.384
318.152
333.596
349.040
634.484
379.929
319.696
335.140
350.585
366.029
381.473
321.241
336.685
352.129
367.573
383.018
322.785
338.229
353.673
369.118
384.562
25
26
27
28
29
386.106
401.551
416.995
432.439
447.883
387.651
403.095
418.539
433.984
449.428
389.195
404.640
420.084
435.528
450.972
390.740
406.184
421.628
437.072
452.517
392.284
407.728
423.173
438.617
454.061
393.829
409.273
424.717
440.161
455.606
395.373
410.817
426.261
441.706
457.150
396.917
412.362
427.806
443.250
458.694
398.462
413.906
429.350
444.795
460.239
400.006
415.450
430.895
446.339
461.783
30
31
32
33
34
463.328
478.772
494.216
509.660
525.105
464.872
480.316
495.761
511.205
526.649
466.417
481.861
497.305
512.749
528.194
467.961
483.405
498.849
514.294
529.738
469.505
484.950
500.394
515.838
531.282
471.050
486.494
501.938
517.383
532.827
472.594
488.039
503.483
518.927
534.371
474.139
489.583
505.027
520.471
535.916
475.683
491.127
506.572
522.016
537.460
477.228
492.672
508.116
523.560
539.005
35
36
37
38
39
540.549
555.993
571.437
586.882
602.326
542.093
557.538
572.982
588.426
603.870
543.638
559.082
574.526
589.971
605.415
545.182
560.627
576.071
591.515
606.959
546.727
562.171
577.615
593.059
608.504
548.271
563.715
579.160
594.604
610.048
549.816
565.260
580.704
596.148
611.593
551.360
566.804
582.248
597.693
613.137
552.904
568.349
583.793
599.237
614.681
554.449
569.893
585.337
600.782
616.226
40
41
42
43
44
617.770
633.215
648.659
664.103
679.547
619.315
634.759
650.203
665.647
681.092
620.859
636.303
651.748
667.192
682.636
622.404
637.848
653.292
668.736
684.181
623.948
639.392
654.836
670.281
685.725
625.492
640.937
656.381
671.825
687.269
627.037
642.481
657.925
673.370
688.814
628.581
644.025
659.470
674.914
690.358
630.126
645.570
661.014
676.458
691.903
631.670
647.114
662.559
678.003
693.447
45
46
47
48
49
694.992
710.436
725.880
741.324
756.769
696.536
711.980
727.424
742.869
758.313
698.080
713.525
728.969
744.413
759.857
699.625
715.069
730.513
745.958
761.402
701.169
716.613
732.058
747.502
762.946
702.714
718.158
733.602
749.046
764.491
704.258
719.702
735.147
750.591
766.035
705.803
721.247
736.691
752.135
767.580
707.347
722.791
738.235
753.680
769.124
708.891
724.336
739.780
755.224
770.668
111
CCI
conversion
and
comparison
information
112
tonf/in2
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
50
51
52
53
54
772.21
787.66
803.10
818.55
833.99
773.76
789.20
804.65
820.09
835.35
775.30
790.75
806.19
821.63
837.08
776.85
792.29
807.74
823.18
838.62
778.39
793.84
801.28
824.72
840.17
779.94
795.38
810.82
826.27
841.71
781.48
796.48
812.37
827.81
843.26
783.02
798.47
813.91
829.36
844.80
784.57
800.01
815.46
830.90
846.35
786.11
801.56
817.00
823.45
847.89
55
56
57
58
59
849.43
864.88
880.32
895.77
911.21
850.98
866.42
881.87
897.31
912.76
852.52
867.97
883.41
898.86
914.30
854.07
869.51
884.96
900.40
915.84
855.61
871.06
886.50
901.95
917.38
857.16
872.60
888.05
903.49
918.93
858.70
874.15
889.59
905.03
920.48
860.25
875.69
891.13
906.58
922.02
861.79
877.23
892.68
908.12
923.57
863.33
878.78
894.22
909.67
925.11
60
61
62
63
64
926.66
942.10
957.54
972.99
988.43
928.20
943.64
959.09
974.53
989.98
929.74
945.19
960.63
976.08
991.52
931.29
946.73
962.18
977.62
993.07
932.83
948.28
963.72
979.17
994.61
934.38
949.82
965.27
980.71
996.16
935.92
951.37
966.81
982.26
997.70
937.47
952.91
968.36
983.80
999.24
930.01
954.46
969.90
985.34
1000.79
940.56
956.00
971.44
986.89
1002.33
65
66
67
68
69
1003.88
1019.32
1034.77
1050.21
1065.65
1005.72
1020.87
1036.31
1051.75
1067.20
1006.97
1022.41
1037.85
1053.30
1068.74
1008.51
1023.95
1039.40
1054.84
1070.29
1010.05
1025.50
1040.94
1056.39
1071.83
1011.60
1027.04
1042.49
1057.93
1073.38
1013.14
1027.04
1042.49
1057.93
1073.38
1014.69
1030.13
1045.58
1061.02
1076.76
1016.23
1031.68
1047.12
1062.56
1078.01
1017.78
1033.22
1048.67
1064.11
1079.55
70
71
72
73
74
1081.10
1096.54
1111.99
1127.43
1142.87
1082.64
1098.09
1113.53
1128.98
1144.42
1084.19
1099.63
1115.08
1130.52
1145.96
1085.73
1101.18
1116.62
1132.06
1147.51
1087.28
1102.72
1118.16
1133.61
1149.05
1088.82
1104.26
1119.71
1135.15
1150.60
1088.82
1104.26
1119.71
1135.15
1150.60
1091.91
1107.35
1122.80
1138.24
1153.69
1093.45
1108.90
1124.34
1139.79
1155.23
1095.00
1110.44
1125.89
1141.33
1156.77
75
76
77
78
79
1158.32
1173.76
1189.21
1204.65
1220.10
1159.86
1175.32
1190.75
1206.20
1221.64
1161.41
1167.85
1192.30
1207.74
1223.19
1162.95
1178.40
1193.84
1209.29
1224.73
1164.50
1179.94
1195.39
1210.83
1226.27
1166.04
1181.49
1196.93
1212.37
1227.82
1167.59
1183.03
1198.47
1213.92
1229.36
1169.13
1184.57
1200.02
1215.46
1230.91
1170.67
1186.12
1201.56
1217.01
1232.45
1172.22
1187.66
1203.11
1218.55
1234.00
80
81
82
83
84
1235.54
1250.98
1266.43
1281.87
1297.32
1237.08
1252.53
1267.97
1283.42
1298.86
1238.63
1254.07
1269.52
1284.96
1300.41
1240.17
1255.62
1271.06
1286.51
1301.95
1241.72
1257.16
1272.61
1288.05
1303.50
1234.26
1258.71
1274.15
1289.60
1305.04
1244.81
1260.25
1275.70
1291.14
1306.58
1246.35
1261.80
1277.24
1292.68
1308.13
1247.90
1263.34
1278.78
1294.23
1309.67
1249.44
1264.88
1280.33
1295.77
1311.22
85
86
87
88
89
1312.76
1328.21
1343.65
1359.09
1374.54
1314.31
1329.75
1345.19
1360.64
1376.08
1315.85
1331.29
1346.74
1362.18
1377.63
1317.40
1332.84
1348.28
1363.73
1379.17
1318.94
1334.38
1349.83
1365.27
1380.72
1320.48
1335.93
1351.37
1366.82
1382.26
1322.03
1337.47
1352.92
1368.36
1383.81
1323.57
1339.02
1354.46
1369.91
1385.35
1325.12
1340.56
1356.01
1371.45
1386.89
1326.66
1342.11
1357.55
1372.99
1388.44
90
91
92
93
94
1389.98
1405.43
1420.87
1436.32
1451.76
1391.53
1406.97
1422.42
1437.86
1453.30
1393.07
1408.52
1423.96
1439.40
1454.85
1394.62
1410.06
1425.50
1440.95
1456.39
1396.16
1411.61
1427.05
1442.49
1457.94
1397.71
1413.15
1428.59
1444.04
1459.48
1399.25
1414.69
1430.14
1445.58
1461.03
1400.79
1416.24
1431.68
1447.13
1462.57
1402.34
1417.78
1433.23
1448.67
1464.12
1403.88
1419.33
1434.77
1450.22
1465.66
95
96
97
98
99
1467.20
1482.65
1498.09
1513.54
1528.98
1468.75
1484.19
1499.64
1515.08
1530.53
1470.29
1485.74
1501.18
1516.63
1532.07
1471.84
1487.28
1502.73
1518.17
1533.61
1473.38
1488.83
1504.27
1519.71
1535.16
1474.93
1490.37
1505.81
1521.26
1536.70
1476.47
1491.92
1507.36
1522.80
1538.25
1478.02
1493.46
1508.90
1524.35
1539.79
1479.56
1495.00
1510.45
1525.89
1541.34
1481.10
1496.55
1511.99
1527.44
1542.88
100
1544.43
Notes:
113
Notes:
114
CONTACT US TODAY:
S&T047