Trident Seafoods expanded the docking capacity of its seafood plant on Akutan Island, Alaska by constructing a new 305m long sheet pile quay wall. To support the wall, DYWIDAG Systems International USA supplied 170 57mm and 11 43mm double corrosion protection tie rods ranging from 13-40m in length. The tie rods were used to tie back the sheet pile wall into the load-bearing soil and included accessories for installation.
Trident Seafoods expanded the docking capacity of its seafood plant on Akutan Island, Alaska by constructing a new 305m long sheet pile quay wall. To support the wall, DYWIDAG Systems International USA supplied 170 57mm and 11 43mm double corrosion protection tie rods ranging from 13-40m in length. The tie rods were used to tie back the sheet pile wall into the load-bearing soil and included accessories for installation.
Trident Seafoods expanded the docking capacity of its seafood plant on Akutan Island, Alaska by constructing a new 305m long sheet pile quay wall. To support the wall, DYWIDAG Systems International USA supplied 170 57mm and 11 43mm double corrosion protection tie rods ranging from 13-40m in length. The tie rods were used to tie back the sheet pile wall into the load-bearing soil and included accessories for installation.
Construction North America USA Hydro- & Marine Structures
DYWIDAG Tie Rods create better Access:
New Pier on Akutan
mong its other operations,
Trident Seafoods, the largest seafood producer in North America, also operates a seafood plant on Akutan Island in the Aleutians, a chain of islands that belongs to Alaska. Since the island only has a very small amount of infrastructure, Trident Seafoods has its own dock for the fishing boats that supply its plant. In order to expand the docking capacity of the facility, a new quay wall was built at the east dock. To construct the new quay wall, a 305m long sheet pile wall was built that was tied back with DYWIDAG Tie Rods into load-bearing soil. To tie back the sheet pile wall, DSI USA supplied a total of 170 57mm double corrosion protection (DCP) DYWIDAG Tie Rods in lengths between 21 and 40m. In addition, 11 43mm DCP DYWIDAG Tie Rods in lengths between 13 and 16m were supplied. All tie rods featured cover caps on both ends and were supplied to the job site with accessories such as couplers, nuts and ducts.
Owner Trident Seafoods Inc., USA
General Contractor Western Marine Construction, Inc., USA Consulting Engineers Northern Geotechnical Engineering, Inc., USA DSI Unit DYWIDAG-Systems International USA, Inc., BU Geotechnics, USA DSI Scope Production, supply DYWIDAG Products 170 57mm DYWIDAG Tie Rods, 11 43mm DYWIDAG Tie Rods