Professional Documents
Culture Documents
USB VCOM Driver Installation
USB VCOM Driver Installation
Driver Installation
kumar abhishek
25th March 2013, 03:27 PM | #1
OP Senior Member
Thanks: 1,870
984 posts
Joined: Jan 2012
Since here every day again and again problems with the USB
VCOM driver installation for MTK6577 appear Phones, here
is a short guide to the installation, and a final, successful test
with SPFlashtool!
Installation of the USB VCOM driver:
[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries,
then reboot your PC.
[2] Smartphone is switched off, and still dont connect via USB to the PC.
[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers
folder. Confirm the installation of unsigned drivers
[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the
installation is complete, you have no entry in the Device Manager, it is correctly!
[7] PC reboot!
[8] Open Device Manager and open the switched-off Smartphone via USB to the PC
release, now connect (same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the
Device Manager entry!
[10] At the moment the entry double click and click on "Update driver" under the tab
"Driver".
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and
select the folder for your operating system.
Quote:
Required Downloads:
Download MT6577 USB VCOM Driver (W7/Vista/XP) -> http://www.mediafire.com/?
cypm22rgs2k83ji
Download MT6577 USB VCOM Driver (W8) -> http://www.mediafire.com/?
7yee2of64nhl947
Download USBDeview -> http://www.mediafire.com/?becpnj761zh5o2w
Download USBDeview x64 -> http://www.mediafire.com/?41i2k36yyi1fzhz