Professional Documents
Culture Documents
2G Parameter List ZTE
2G Parameter List ZTE
Parameter
Max number of re-transmitting events times(MRetrans)
Number of slots to spread transmission(Txinteger)
Cell bar qualify(CellBarQualify)
PLAN_CELL_ACCESS_TABLE
Cell bar access(CellBarAccess)
Control channel maximum power level(MsTxPwrMaxCch)
Min received signal level to access(RxLevAccessMin)
IMSI attach/detach allowed(ImsIadAllowed)
Call reestablishment allowed(CallReestablish)
Directed retry indication switch(DrInd)
Uplink discontinuous transmission(DtxUplinkBcch)
Downlink discontinuous transmission allowed(DtxDwlink)
Preprocessing indication(Preprocess)
Fast average indication(FastAvg)
Allow FACCH call setup after emergency call
CBC support(SmsCbUsed)
PLAN_CELL_FUNCTION_TABLE
Multi-band report indication(MulbandReport)
Early category class-mark sending control(ECSC)
HBTS proofread support(HBTSScanSupport)
RSSI threshold(RSSIThrd)
Proofread freqband type(GSM1900Support)
HBTS Arfcn Range Number
HBTS rang low
HBTS rang high
Uplink power level(HoUlLevWindow)
Averaging weight for uplink power level UTRAN
Downlink power level(HoDlLevWindow)
Averaging weight for downlink power level UTRAN
Uplink quality(HoUlQualWindow)
Averaging weight for uplink quality UTRAN
Downlink quality(HoDlQual)
Averaging window for downlink quality UTRAN
Distance(DistanceWindow)
PLAN_CELL_HANDOVER_SAMPLING_TAB
Neighboring cell(NCellWindow)
Number of zero allowed in AV(ZeroAllowed)
Hoc pattern indication(HoPatternInd)
Parameter for PBGT between different layers
The threshold for starting PBGT handover(PbgtHoStartThs)
Handover from macro to micro(MacroMicroStartThs)
Hysteresis timer when traffic handover(TrafficHysteresisTm,s)
The priority of the handover from Macro cell to Micro cell(MacroMicroHoPrio)
Hoc control(HoControl)
Min interval between inter-cell handover(HoMinInterval,s)
Uplink receive level(HoUlLevThs)
Downlink receive level(HoDlLevThs)
Uplink receive quality(HoUlQualThs)
Downlink receive quality(HoDlQualThs)
Uplink receive level of intra-ho(IntraHoUlLevThs)
Downlink receive level of intra-ho(IntraHoDlLevThs)
Max time advance threshold between MS and BTS(DistanceThs)
P value of uplink receive level UTRAN
N value of uplink receive level UTRAN
P value of downlink receive level UTRAN
N value of downlink receive level UTRAN
P value of uplink receive quality UTRAN
N value of uplink receive quality UTRAN
P value of downlink receive quality UTRAN
N Value of downlink receive quality UTRAN
PLAN_CELL_HANDOVER_TABLE
PLAN_CELL_RESELECTION_TABLE
PLAN_CELL_TABLE
PLAN_EDGE_CELL_CONFIG_TABLE
PLAN_GPRS_CELL_CONFIG_TABLE
PS preempt CS support(PSPrmpCSSupport)
Subscriber occupying other preference channel support(HybridOccuSupp)
PS subscriber moving out of other preference channel
support(AllowPsMove)
Congeneric service threshold for PS-moving(SfPreferBusyThs)
Uncongeneric service threshold for PS-moving(OpPreferBusyThs)
C/I(Sc)
ARP(Sa)
THP(St)
PS queuing support(PsQueueInd)
Max PS queue count(PsMaxQueueInstNum)
PS preemption support(PsPreemptionInd)
CS subscriber moving support(AllowCsMove)
The size of test report's slip window(Wnd)
Allowed report number of the same cell in Slip window(AllowedRepNum)
CCCH SPLITPGCYCLE support(SpgcSuport)
Packet access priority threshold(PriAcThr)
Interval period of packet access attempt(S)
Max times of attempt(MaxRetrans)
3G NACC support(Support3GCCN)
PSI1 send period(Psi1RepPer)
Extended dynamic allocation supported(ExtDynAllocsupp)
Max resource for POC service(POCSrcThs,%)
DSP No.(DSP)
Info
Info1
Priority of handover(Hopriority)
MAX power level of MS(MsTxPwrMax)
MIN power level for handover access(RxLevMin)
MIN threshold of signal level for handover on PBGT(HoMarginPbgt)
MIN threshold of signal level for handover on power level(HoMarginRxLev)
MIN threshold of signal level for handover on quality(HoMarginRxQual)
MAX level difference of force handover(MaxForceHoDiff)
Handover force resource threshold(HoForceResThs)
PLAN_HANDOVER_RESELECTION_CELL_ Neighboring cell layer(NCellLayer)
CS adjacent cell report priority(RepPrioCS)
PS adjacent cell report priority(RepPrioPS)
Is related cell(IsRelatedCell)
Is handover forced neighbor cell(IsHoForceNcell)
CCN support(CCNSupport)
Cell type(CellType)
RAC
Target cell traffic threshold(TargetCellTrafficThs)
FIELD_IBTSHO_MACROMICROHOTHS
Counter of handover threshold from macro to micro (MacroMicroHon)
Assign queue enable(AssQueEnable)
Internal redirection enable(InDrEnable)
Outer redirection enable(OutDrEnable)
Assign preemption enable(AssPreEmpt)
BSC intra cell handover enable(HoIntraEnable)
BSC cell handover enable(HoInterEnable)
BSC outer handover enable(HoOutEnable)
SDCCH handover enable(ShoEnable)
PLAN_IBSCMODULE
PLAN_MOC_IBSCFUNCTION
PLAN_NETWORK_TABLE
PLAN_NETWORK_TABLE
PLAN_POC_SAMPLING_TABLE
PLAN_POC_TABLE
PLAN_POC_TABLE
P value.If there are P in N downlink intensity mean values are lower than
PcUlInclLevThs value, power will increase
N value. If there are P in N downlink intensity mean values are lower than
PcUlInclLevThs value, power will increase
P value. If there are P in N downlink intensity mean values are higher than
PcUlInclLevThs value, power will decrease
N value. If there are P in N downlink intensity mean values are higher than
PcUlInclLevThs value, power will decrease
P value. If there are P in N downlink quality mean values are higher than
PcUlInclQualThs value (worse), power will increase
N value. If there are P in N downlink quality mean values are higher than
PcUlInclQualThs value (worse), power will increase
P value. If there are P in N uplink (downlink) quality mean values are lower
than PcUlInclQualThs value, power will decrease
N value. If there are P in N uplink (downlink) quality mean values are lower
than PcUlInclQualThs value, power will decrease
Power decrease limit
PLAN_RESELECTION_CELL_TABLE
PLAN_TRX_TABLE