CTL + P: To backup one step CTL + G: Go to the beginning menu, STYLE CTL + O: Move pantograph to origin ENT: Enter key. To accept. SPACE: Spacebar key. SHIFT: To get lower case letters. START: If input data is ready, to begin sewing. STOP: Stop sewing.
Frame move ARROW KEYS: To manually move the pantograph.
Load a new design
Loading from the Tape Reader or USB Reader. 1. The BEAT 100 can only run one stitch at a time from the reader. 2. If you just turned on the machine, it will ask PARAMETERS EXCHANGE?. 3. Press N and ENTER. 4. If you are not at the STYLE menu, then press CTL+G to get to the STYLE menu. 5. At the 1. STYLE menu, press 8 and ENTER. 6. At the 2. TAPE FORMAT menu, press 1 and ENTER. 7. At the 6. MIRROR IMAGE menu, press 0 and ENTER. 8. It will say INPUT OK? Press Y and ENTER. 9. It will say TAPE READER DRIVE. 10. Press the START button to start sewing one stitch at a time from the reader.
Error codes
SPK ERROR: Make sure the tape or USB reader is ready for download before starting the load process.