You are on page 1of 3

CE 371 HOMEWORK 3

1) A gate having the shape in the figure is


located in the vertical side of an open tank
containing water. The gate is mounted on a
horizontal shaft. (a) When the water level is
at the top of the gate, determine the
magnitude of the fluid force on rectangular
portion of the gate above the shaft and the
magnitude of the fluid force on the
semicircular portion of the gate below the
shaft. (b) For this same fluid depth determine
the moment of the force acting on the
semicircular portion of the gate with respect
to an axis which coincides with the shaft.
water = 9810 N/m3
For a a semi circle;
4R
I xc 0.1098R 4 and y CG
3

2) As water rises on the left side of the


rectangular gate, the gate will open
automatically. At what depth above the hinge
will this occur? Neglect the mass of the gate.
water = 9810 N/m3

Gate

1.5 m
D

Hinge
Water

3) Gate AB in the figure has a homogeneous


mass of 180 kg, 1.2 m wide into the paper,
resting on smooth bottom B. For what water
depth h will the force at point B be zero?
glycerin = 12360 N/m3, water = 9810 N/m3

4) The pressure in the air gap is 8000 Pa


gage. The tank is cylindrical. Calculate the
net hydrostatic force (a) on the bottom of
the tank; (b) on the cylindrical sidewall
CC; and (c) on the annular plane panel BB.
water = 9810 N/m3

5) For the closed tank of the figure, all


fluids are at 20C and the air space is
pressurized. If the outward net hydrostatic
force on the 40-cm by 30-cm panel at the
bottom is 8450 N, estimate (a) the pressure
in the air space; and (b) the reading h on
the manometer. oil = 8720 N/m3, water =
9810 N/m3, mercury = 133100 N/m3

6) A V shaped tank is hinged about point


A as shown in the figure. The tank is
prevented from opening by a cable BC. Find
the force in the cable if the spacing between
the cables perpendicular the figures plane is
1 m. water = 9810 N/m3

1m
Water

8) An open rectangular container contains a


liquid that has a specific weight that varies
according to the equation c1 c 2 h , where
c1 and c2 are constants and h is a vertical
coordinate measured downward from the
free surface. Derive an equation for the
magnitude of the liquid force exerted on the
one wall of the container having a width, b,
and height H, and an equation that gives the

3m

110

7) Gate AB in the figure is hinged at A,


has width b into the paper, and makes
smooth contact at B. The gate has uniform
density S and uniform thickness t. For what
gate density, expressed as a function of (h, t,
, ), will the gate just begin to lift off the
bottom?

Cable

Hinge

vertical coordinate of this force.

9) Two square gates close two openings in a


conduit connected to an open tank of water
as shown in the figure. When the water depth
h reaches 5 m it is desired that both gates
open at the same time. Determine the weight
of the homogeneous horizontal gate and the
horizontal force R, acting on the vertical gate
that is required to keep the gates closed until
this depth is reached. The weight of the
vertical gate is negligible and both gates are
hinged at one end as shown. Friction in the
hinges is negligible. water = 9810 N/m3
10) A structure is attached to the ocean floor
as shown in the figure. 2 m diameter hatch is
located an inclined and hinged at on one
edge. Determine the minimum air pressure,
p1 within the container to open the hatch.
Neglect the weight of the hatch and friction
in the hinge. sea water = 10.1 kN/m3

ANSWERS
1)a) Frec = 1059 kN, Fcir = 1009 kN; b) 1.37106 Nm
2) 2.598 m
3) 2.44 m
4) a) 1183.8 N; b) 0; c) 853.8 N
5) a) 58808 Pa (gauge); b) 0.44 m
6) 33541 N
2h

7) s
3t cos
2 1 c2
H
2
3
H
H h 3 4 c1
;

c2
8) F = b c1
2
6

H 1 1 c 2 H
3 c1
9) W = 31.92 kN, R =497.04 kN
10) 26.5 kPa

You might also like