Professional Documents
Culture Documents
Page1, Total25
CONTENT
A. SPESIFICATION AND SUPPORTING HARDWARE
1. Supporting hardware.
2. Laptop spesification..
3. Supporting software..
B. SOFTWARE INSTALLATION .
2013-04-16
18
Page2, Total25
1. Supporting Hardware
Laptop charger
2. Laptop Spesification
3. Supporting Software
2013-04-16
Filezilla 3.6.0.2
HISI UE agent
HI Studio 1.23.0
Page3, Total25
B. SOFTWARE INSTALLATION
2013-04-16
Page4, Total25
2013-04-16
Page5, Total25
After the USB modem connected, will automatically prepare to install, click NEXT
2013-04-16
Page6, Total25
In Choose install location, clicks BROWSE, then choose your location to install.
After that, click NEXT
2013-04-16
Page7, Total25
2013-04-16
Page8, Total25
Input the Profile Name, example : LTE-TDD SITRA, APN setting : STATIC, The
Access Number: *99#. then click SAVE
2013-04-16
Page9, Total25
2013-04-16
Page10, Total25
Then click NEXT, after that on the LICENSE AGREEMENT, choose I ACCEPT
THE TERMS OF THE LICENSE AGREEMENT. Last, click NEXT
Enter the user name and password & company name, the click next. Then on the
SETUP TYPE, choose COMPLETE, then click NEXT
Then, the installation require to install the GENEX Shared, click OK, and choose
MODIFY, Then click NEXT
2013-04-16
Page11, Total25
In SELECT FEATURE, click all of feature, then click NEXT, then GENEX
SHARED installation is finish
Continue for GENEX Probe installation, then after the installation wizard
complete, click YES, I WANT TO RESTART MY COMPUTER NOW, then click
finish
Then click GENEX PROBE V3.5 icon, then give the ESN number to the HUAWEI
Engineer, after get the license, click UPDATE LICENSE
2013-04-16
Page12, Total25
2013-04-16
Page13, Total25
4.
HI STUDIO 1.23.0
Installation procedure:
2013-04-16
Page14, Total25
On Select Additional Tasks, click NEXT, the on Ready to Install, click INSTALL
2013-04-16
Page15, Total25
5. HISI UE AGENT
Installation procedure:
Double Click on the HISI UE AGENT installer, when the GUI showed, click NEXT
2013-04-16
Page16, Total25
Click NEXT, check on the Create a desktop icon, then click NEXT
2013-04-16
Page17, Total25
1. DO NOT CONNECT Dongle and GPS before open the GENEX PROBE V3.5
2013-04-16
Page18, Total25
4. Then click CONFIGURATION > DEVICE MANAGEMENT > DEVICE CONFIGURE >
add GPS
5. Choose COM Port by see the information on Device Manager then click OK
2013-04-16
Page19, Total25
7. Then click
to connect the device (LTE MODEM & GPS), see the state:
CONNECTED
2013-04-16
Page20, Total25
11. Then match the Probe parameter with the excel parameter
2013-04-16
Page21, Total25
12. Open the FILEZILLA 3.6 for ftp Download test, input the connection blow:
Host
Username : admin
Password
: admin
Port
: (none)
: 10.1.12.149
After input, click QUICKCONNECT, then choose 2 file on the right table:
1G_DL_1_from_149
1G_DL_2_from_149
After choose this 2 files, right click then click DOWNLOAD > ADD FILES TO
QUEQUE (click many times), then check the DU METER for the Download
throughput. Make sure that the throughput is up.
OPEN 3 FILEZILLA at the same time to get the maximum throughput
2013-04-16
Page22, Total25
13. For the UPLOAD test, the procedure almost same, but the differences is: choose file
on the left side (Laptop hard drive) then, choose 2 FILE below:
1G_DL_1_from_149
1G_DL_2_from_149
After choose this 2 files, right click then click UPLOAD > ADD FILES TO QUEQUE
(click many times), then check the DU METER for the UPLOAD throughput. Make
sure that the throughput is up.
OPEN 3 FILEZILLA at the same time to get the maximum throughput
2013-04-16
Page23, Total25
15. To view the RF parameter, click :VIEW (on the toolbar) > LTE > RADIO
PARAMETERS
2013-04-16
Page24, Total25
18. For REPLAY the logfile, choose Logfile >open logfile, then select the datafile to be
displayed. Click
on the toolbar in tehe main window. During the replay, you can
2013-04-16
Page25, Total25