Professional Documents
Culture Documents
Project
www.huawei.com
www.huawei.com
Basic Principle
How to Calculate RS
Kind of Symbol
PB Explanation
*PB 0 is mean there is no increment on CRS RE its mean non power boosting, but PDSCH power increase
to 5/4.
*By using PB 1, the RS Power increase on CRS RE two units its mean about power boosting and PDSCH
power on symbol type B same.
*By using PB 3, the RS Power increase on CRS RE 4 units its mean about power boosting and PDSCH
power on symbol type B
5
reduce half than PB 1.
Simulation Result
RSRP with PB : 1
RSRP with PB : 3
RSRP Comparison
is simulation one site have configuration of 10 MHz and all cells using RS Power 15.2 dBm with different PB configuratio
SINR with PB : 1
10
SINR with PB : 3
11
SINR Comparison
From Simulation single site there is improvement of SINR > 0 dB around 3.65%
12
DL Throughput with PB : 1
13
DL Throughput with PB : 3
14
DL Throughput Comparison
15
RSRP
17
RSRP Comparison
RS : 15.2 dBm
PB : 1
Pwr : 10 W
RS : 18.2 dBm
PB : 3
Pwr : 10 W
s simulation one site have configuration of 10 MHz and all cells using different RS Power but with the same PB configura
18
SINR
19
SINR Comparison
From Simulation single site there is improvement of SINR > 0 dB around 9.51%
20
DL Throughput
Improve
Improve
Improve
21
DL Throughput Comparison
Compare with Average user Throughput for RS Power 15.2 dBm PB 1 which
have same power consumption, Average DL Throughput for 18.2 dBm PB3
have degraded 0.46% inside the polygon.
This degradation inline with the improvement of coverage outside the polygon.
22
Conclusion