Professional Documents
Culture Documents
Design Tanks Catalog
Design Tanks Catalog
1-888-366-8265 (TANK)
www.designtanks.com
sales@designtanks.com
Design Tanks!
by Tom Huegel
Lorem ipsum
dolor sit amet
Consectetuer adipiscing
elit sed diam nonummy
Nibh euismod tincidunt ut
laoreet dolore
Ut wisi enim ad
minim venia
TABLE OF CONTENTS
Accessories
Flanged Connections
Couplings
Bulkhead Fittings
Vents and Venting Specifications
Down Pipes, Baffles, Gussets
Mix Tanks
Mix Tank Accessories
Sectionalized Tanks
Capacity and Dimension Chart
INTRODUCTION
Design Tanks has been manufacturing fiberglass tanks for over forty years
in the Midwest, we are located in Sioux Falls, South Dakota.
Although the name has changed, the faces have not. Through streamlining
the manufacturing and administrative process, we are able to deliver our
product to the customer quicker than ever;
whether you need it in California, Texas,
New Jersey or the Phillipines and any point
in between.
Our in-house design staff can take care of
your most difficult design specifications and
provide you with the answers you require.
By utilizing centrifugal force to combine resin and glass, the process provides tanks with a
dense uniform wall laminate capable of a 70% resin content. For all practical purposes, the entire
wall becomes a resin-rich, chemical-resistant barrier that can be custom designed for specific
requirements ranging from the storage of corrosive chemicals such as hydrochloric acid and sodium hydroxide to food grade applications.
The spin cast tank is produced inside a smooth metal cylinder. First the end section, which
is sprayed up in a separate mold, is inserted into the cylinder at a point determined by tank capacity. This flexibility allows us to manufacture a variety of sizes without changing tooling. For
example a 32 diameter tank can be made to hold any capacity between 100 and 300 gallons by
adjusting the distance that the head is placed into the mold.
After the end section has been located, sidewall construction begins by applying a 10 to 15 mil
layer of resin coat or gel coat to the spinning mold. This provides the tank with its desired color and
the distinctive exterior finish.
The backbone of the tank, the structural wall and corrosion barrier, is constructed next by combining chemical resistant resin with chopped strand E glass for strength. Chopped glass or roving
form, has been selected to minimize potential wicking problems sometimes associated with
other reinforcements.
The resin saturated chopped strand reinforcement is introduced to the mold in layers and
then rolled to remove trapped air bubbles to insure a dense uniform laminate. This
process is then repeated with each additional resin/glass layer to meet the design wall
thickness.
A 10-15 mil layer of pure or pigmented resin is applied to the mold surface.
B Glass mat or chopped "E" glass is added to meet design thickness.
C 7-10 mils of pure resin is applied to the inside surface.
A
After curing in the mold, the tank is removed by air pressure, checked for quality and sent to the final
assembly area for the installation of accessories. Centrifugally cast tanks are available in several
sizes and styles. Each can be constructed from a number of
resin systems to meet specific chemical and temperature
requirements. Refer to resin selection guide to determine
material compatibility.
PROPERTIES (MINIMUM)
Tensile strength (PSI)........14,000 ASTM D638-96
Tensile modulus (PSI) ....800,000 ASTM D638-96
Compressive strength (PSI)18,000 ASTM D695-96
Coefficient of thermal expansion
(in./in./F x 106) ................12 ASTM D-696-91
Flexural modulus (PSI) 600,000 ASTM D790-96a
Flexural strength (PSI)....19,000 ASTM D790-96a
PART NO.
A1343
A1463
A2223
A2273
A2383
A2513
A2623
A3332
A3472
A3653
A4362
A4513
A4663
A4853
A5202
A5313
A5423
A5533
A5633
A5784
A5834
A6483
A6563
NOMINAL
CAPACITY
(GALS.)
25
55
65
85
55
65
85
110
130
110
150
200
150
200
250
300
150
200
250
300
350
400
425
350
400
DIAMETER
X LENGTH
(IN.)
23 x 18
23 x 36
23 x 42
23 x 54
24 x 32
24 x 37
24 x 47
24 x 60
24 x 71
30 x 43
30 x 57
30 x 75
32 x 49
32 x 65
32 x 79
32 x 93
38 x 37
38 x 48
38 x 58
38 x 69
38 x 79
38 x 89
38 x 94
42 x 66
42 x 75
APPROX.
APPROX.
WALL
WALL
LENGTH (IN.) THK. (IN.)
8
26
32
44
20
25
36
49
59
30
44
63
32
48
64
78
17
27
38
50
60
70
75
46
55
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
1/8
1/8
5/32
1/8
5/32
5/32
5/32
1/8
5/32
5/32
5/32
5/32
3/16
3/16
5/32
5/32
APPROX.
WEIGHT
(LBS.)
22
27
29
34
28
30
34
40
56
46
51
74
53
74
86
109
68
73
82
105
115
147
156
117
127
NO. OF
SADDLES
REQUIRED
2
2
2
2
2
2
2
2
3
2
2
3
2
2
3
3
2
2
2
2
2
3
3
2
2
PART NO.
NOMINAL
CAPACITY
(GALS.)
DIAMETER
X LENGTH
(IN.)
A6744
A6834
A7544
A7674
A7855
A7955
A7B25
A7C56
A8654
A8765
A8865
A8955
A8A35
A8B26
A8F66
AF655
AF985
AFC87
AFG18
A9215
A9585
A9956
A9D28
A9G9A
A9K6C
500
530
500
600
700
800
900
1000
1000
1100
1200
1300
1400
1500
2000
1500
2000
2500
3000
1000
2000
3000
4000
5000
6000
42 x 91
42 x 97
48 x 73
48 x 86
48 x 100
48 x 112
48 x 126
48 x 139
60 x 97
60 x 105
60 x 113
60 x 122
60 x 130
60 x 138
60 x 180
72 x 102
72 x 131
72 x 160
72 x 189
90 x 54
90 x 91
90 x 128
90 x 165
90 x 202
90 x 239
APPROX.
APPROX.
WALL
WALL
LENGTH (IN.) THK. (IN.)
70
76
50
63
77
90
104
117
60
68
77
86
94
102
145
61
90
120
149
16
53
90
127
164
200
3/16
3/16
3/16
3/16
7/32
7/32
7/32
9/32
3/16
7/32
7/32
7/32
7/32
9/32
9/32
7/32
7/32
5/16
3/8
7/32
7/32
1/4
11/32
13/32
1/2
APPROX.
WEIGHT
(LBS.)
170
181
186
206
266
291
317
391
393
452
476
498
517
590
718
661
756
990
1211
603
735
945
1418
1995
2649
NO. OF
SADDLES
REQUIRED
3
3
2
2
3
3
4
4
2
3
3
3
3
3
4
2
3
3
4
2
2
2
2
2
2
A1102
A1282
A1342
A1462
A2222
A2272
A2382
A2512
A2623
A3332
A3472
A3653
A4362
A4513
A4663
A4853
SADDLE SPACING
X IN INCHES
MAX
MIN.
7
24
30
41
18
23
34
46
56
29
42
60
31
46
61
74
9
27
33
45
21
26
37
50
60
31
45
64
33
49
65
79
TANK
PART NO.
SADDLE SPACING
X IN INCHES
MIN. MAX
A5202 16 18
A5313 26 28
A5423 37 39
A5533 48 51
A5633 57 61
A5784 67 71
A5834 71 76
A6483 41 45
A6563 50 54
A6744 67 71
A6834 71 76
A7544 47 51
A7674 60 64
A7855 73 78
A7955 86 91
A7B25 99 105
A7C56 111 118
A8654
A8765
A8865
A8955
A8A35
A8B26
A8F66
AF655
AF985
AFC87
AFG18
A9215
A9585
A9956
A9D28
A9G9A
A9K6C
SADDLE SPACING
X IN INCHES
MAX
MIN.
58
65
72
81
89
96
139
58
87
116
144
16
51
85
122
158
195
61
69
78
87
95
103
146
62
91
121
150
17
54
91
128
165
202
TANK
DIAM.
23
24
30
32
38
42
48
60
72
90
N/A -
BAFFLE
PART NO.
BULKHEAD
PART. NO.
N/A
5015I
5088I
5016I
5089I
5017I
5090I
5018I
5091I
5019I
5092I
5020I
5093I
5021I
5103I
5107I
5305I
5306I
N/A
N/A
Not Available
BAFFLES
Partial flow-through baffles eliminate excessive
shifting of liquid in
mobile applications.
BULKHEADS
Bulkheads divide horizontal tanks into compartments allowing the
storage of more than one
chemical.
5145I**
5146I
SUMP SIZE(IN.)
10 x 10 x 6
4x4x2
FRP sumps can be factory installed on any horizontal fiberglass tank to provide nearly complete drainage.
SADDLESFRP
STANDARD SADDLE ASSEMBLIES
Standard steel saddles provide complete support for horizontal fiberglass tanks when
guidelines are followed.
Standard saddles feature minimum clearance between the tank bottom and floor.
Saddles are supplied painted red.
Lead-free Vinyl Alkyd Vogel #IC-5623
Polyester straps hold tank to saddle.
Standard saddles are intended for mobile applications.
SADDLE
TANK
APPROX.
PART NO. DIA. (IN.) WT. (LBS.)
A5000
A5001
A5002
A5003
A5004
A5005
A5006
A5014
23
24
30
32
38
42
48
60
9
9
13
13
15
20
30
64
19
19
25
26 3/4
31
33
39
43 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
N/A
SADDLE
TANK
APPROX. G DIM.
PART NO. DIA. (IN.) WT. (LBS) (GA.)
A5000
23
9
14
A5001
24
9
14
A5002
30
13
13
A5003
32
13
10
A5004
38
15
12
A5005
42
20
12
A5006
48
30
11
A5014
60
64
10
DIM. (INCHES)
C
D
1 7/32
1 7/32
1 7/32
1 7/32
1 7/32
1 7/32
1 7/32
5/8
2 1/2
2 1/2
3
3
3
3 3/8
4 3/8
6 3/8
3
3
4
4
4
5
5
8
9 1/2
9 1/2
14 1/2
14 1/2
17
19 1/2
24 1/2
36
DIM. (INCHES)
M BAND
M DIM.
H
L
ANGLE () LENGTH (IN.)
2.5
10
165
34
2.5
11
160
34
2.5
13 3/4
165
43
2.5
14 3/8
161
45
2.5
13 1/2
140
47
2.5
15 5/8
145
54
2.5
16
135
58
2.5
17 1/8
120
64
SADDLESFRP
INDUSTRIAL SADDLE ASSEMBLIES
Industrial saddle assemblies feature an 8 clearance between the bottom of the tank and the
floor and are recommended for support of horizontal tanks when plumbing access to a
bottom drain fitting is required. When ordering, please specify either standard or industrial
saddles. If no part number is called out, standard saddles will be shipped.
Industrial saddles are shop primed with Vogel No. 5521 Rust Red Primer.
Stainless steel straps and bolts are provided. Primed straps on 72.
Heavy duty foam rubber pad is included with the saddle.
Industrial saddles are not intended for mobile applications.
DIM. (INCHES)
B
C
SADDLE
PART NO.
TANK
DIA. (IN.)
APPROX.
WT. (LBS.)
A5025
A5026
A5027
A5028
A5029
A5030
A5031
A5032
A5041
23
24
30
32
38
42
48
60
72
21
22
27
28
40
44
48
114
190
19 1/4
19 1/4
26
26 3/4
31
35 3/4
40 1/2
46 1/4
58 1/2
SADDLE
PART NO.
TANK
DIA.(IN.)
APPROX.
WT.(LBS.)
E DIM.
(GA.)
F DIM.
(IN.)
A5025
A5026
A5027
A5028
A5029
A5030
A5031
A5032
A5041
23
24
30
32
38
42
48
60
72
21
22
27
28
40
44
48
114
190
10
10
10
10
10
10
10
7
7
16 1/2
17 1/16
19 1/8
20
21 11/16
23 11/16
24 5/16
30 7/16
34 5/8
3
3
3
3
4
4
4
6 1/2
8
4
4
4
4
5
5
5
8
10
9 1/2
9 1/2
14 1/2
14 1/2
17
19
24 1/2
27
31
G DIM.
G BAND
ANGLE() LENGTH(IN.)
150
150
150
150
146
150
142
150
150
30 1/4
32 1/4
39 3/8
42 3/4
49 1/4
55 3/4
60 1/4
79 3/8
95 1/16
SADDLESFRP
SADDLES 90 DIAMETER TANKS
PART NO.
A5010
NUMBER
OF
SADDLES REQUIRED
315
3/8-16 T BOLT
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
B1333
B1393
B1453
B2333
B2393
B2453
B2513
B2583
B2643
B2813
B3333
B3393
B3463
B3523
B3583
B3643
B3673
B4333
B4393
58
68
78
68
79
91
103
114
126
152
100
116
133
150
167
184
192
119
139
23 x 36
23 x 42
23 x 48
24 x 36
24 x 42
24 x 48
24 x 54
24 x 60
24 x 66
24 x 79
30 x 36
30 x 42
30 x 48
30 x 54
30 x 60
30 x 66
30 x 69
32 x 36
32 x 42
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
28
31
34
30
33
36
40
44
47
54
45
51
56
62
68
72
75
53
59
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
B4463
B4523
B4583
B4703
B4813
B5323
B5383
B5443
B5503
B5623
B5683
B5803
B6363
B6483
B6553
B6613
B6673
B6733
B6843
160
180
200
241
267
167
196
225
254
312
341
381
203
274
310
345
380
416
457
32 x 48
32 x 54
32 x 60
32 x 72
32 x 79
38 x 36
38 x 42
38 x 48
38 x 54
38 x 66
38 x 72
38 x 79
42 x 36
42 x 48
42 x 54
42 x 60
42 x 66
42 x 72
42 x 79
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
64
70
76
88
95
74
78
85
93
111
120
130
86
100
109
118
127
136
146
NOMINAL
CAPACITY
(GAL.)
B7323
B7383
B7443
B7503
B7593
B7663
B7693
B7863
B7983
B7B03
B7C23
B7C83
B8524
B8644
B8804
B8924
B8A44
B8B64
B8C84
265
311
357
403
449
495
541
628
720
812
904
950
530
670
810
955
1090
1240
1380
DIAMETER
X HEIGHT
(IN.)
48
48
48
48
48
48
48
48
48
48
48
48
60
60
60
60
60
60
60
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
36
42
48
54
60
66
72
84
96
108
120
126
48
60
72
84
96
108
120
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
112
122
132
143
154
165
176
195
216
236
255
268
219
245
272
298
324
350
377
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
B8D84
BF564
BF894
BFB84
BFF54
BFJ44
B9354
B9534
B9844
B9895
B9C15
B9C56
B9F86
B9E18
B9G58
B9I78
B9L18
1500
1000
1500
2000
2500
3000
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
60 x 130
72 x 61
72 x 90
72 x 119
72 x 148
72 x 177
*90 x 41
*90 x 59
*90 x 78
*90 x 96
*90 x 115
*90 x 133
*90 x 152
*90 x 170
*90 x 189
*90 x 207
*90 x 226
7/32
7/32
7/32
7/32
7/32
7/32
3/16
3/16
3/16-1/4
3/16-1/4
3/16-5/16
3/16-5/16
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
399
300
378
447
536
628
438
470
582
638
775
854
1011
1118
1270
1368
1525
OPTIONAL COVERS
DUST COVER - removable nonload bearing cover designed to
keep out unwanted debris.
FLOATING COVER - designed to
float on top of liquid to reduce
evaporation losses.
TANK
DIAM.
DUST COVER
PART NO.
FLOATING COVER
PART NO.
23
24
30
32
38
42
48
60
72
90*
B500C
B501C
B502C
B503C
B504C
B505C
B506C
B507C
B508C
5164I*
B500F
B501F
B502F
B503F
B504F
B505F
B506F
B507F
B508F
N/A
*90 diameter tanks include an external flanged lip measuring 2 3/4 wide and 1/2 thick. Actual outside diameter of open top 90 tanks is 95 1/2.
*90 diameter tanks 2000 gallon and below, have two lifting lugs. All other 90" tanks have three lugs included.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
C2353
C2613
C2793
C3283
C3443
C3623
C4263
C4403
C4553
C4693
C4793
C5223
C5323
C5423
C5533
C5633
C5774
C6194
C6284
C6364
C6454
C6534
C6624
50
100
125
50
100
145
50
100
150
200
220
50
100
150
200
250
300
50
100
150
200
250
300
24 x 35
24 x 61
24 x 75
30 x 28
30 x 44
30 x 62
32 x 26
32 x 40
32 x 55
32 x 69
32 x 75
38 x 22
38 x 32
38 x 42
38 x 53
38 x 63
38 x 73
42 x 19
42 x 28
42 x 36
42 x 45
42 x 53
42 x 62
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
25
35
60
39
51
64
39
52
65
78
85
40
54
68
80
92
135
59
71
83
95
107
119
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
C6704
C6794
C7374
C7444
C7504
C7574
C7644
C7814
C7944
C7A74
C7B84
C8486
C8606
C8736
C8A34
C8B54
C8C74
C8D94
C8E54
CF944
CFC34
CFF24
CFI54
350
380
200
250
300
350
400
500
600
700
785
425
570
710
855
1000
1140
1285
1350
1000
1500
2000
2500
42 x 70
42 x 75
48 x 37
48 x 44
48 x 50
48 x 57
48 x 64
48 x 77
48 x 90
48 x 103
48 x 114
60 x 48
60 x 60
60 x 72
60 x 84
60 x 96
60 x 108
60 x 120
60 x 126
72 x 80
72 x 109
72 x 138
72 x 167
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
5/16
5/16
5/16
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
131
137
95
108
121
134
147
173
199
225
247
290
328
365
357
384
410
436
450
412
481
550
628
Supported by an
extension of the
sidewall, our
dished bottom
tanks allow for
complete
drainage and
easy cleaning.
This style features a 6 minimum clearance
from bottom of the dish to floor
to provide convenient access to
plumbing through 5 radius scallop in the sidewall. (Standard
clearance on 72 diameter tanks
is 12.)
Isophthalic resin tanks, through
72 diameter, are supplied with
aqua sidewall. 90diameter
tanks and all vinylester resin
tanks are natural in color.
PART NO.
NOMINAL
CAPACITY
(GAL.)
CC314
CC494
CC754
CC815
CCA95
CCB56
CCE56
CCF07
CCH77
CCK37
CCN07
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
90
90
90
90
90
90
90
90
90
90
90
3/16
3/16
3/16-1/4
3/16-1/4
3/16-5/16
3/16-5/16
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
895
955
1040
1120
1280
1385
1515
1640
1850
1980
2090
x
x
x
x
x
x
x
x
x
x
x
47
65
84
102
121
139
158
176
195
213
232
NOTE: 90 diameter tanks 2000 gallon and below, have two lifting lugs. All other 90"
tanks have three lugs included.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
D2243
D2503
D2813
D3163
D3333
D3533
D3643
D4133
D4283
D4423
D4583
D4733
D4813
D5183
D5293
D5393
D5493
D5603
D5703
D5803
D6243
D6333
D6413
D6503
D6593
D6683
D6803
D7213
D7273
D7343
60
110
160
70
120
170
200
75
125
175
225
275
290
145
195
245
295
345
395
425
205
255
305
355
405
455
505
275
325
375
24 x 34
24 x 60
24 x 87
30 x 28
30 x 45
30 x 63
30 x 75
32 x 26
32 x 41
32 x 55
32 x 70
32 x 84
32 x 89
38 x 34
38 x 44
38 x 55
38 x 65
38 x 76
38 x 86
38 x 92
42 x 39
42 x 48
42 x 56
42 x 65
42 x 73
42 x 82
42 x 90
48 x 41
48 x 48
48 x 54
1/8
1/8
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
32
47
61
40
55
72
85
41
59
72
81
102
106
71
85
98
111
127
143
149
98
110
121
132
143
155
168
134
146
158
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
D7413
D7473
D7613
D7784
D7914
D7A44
D7C44
D8434
D8554
D8674
D8834
D8954
D8B94
D8C94
DF354
DF654
DF994
DFD24
DFG84
D9224
D9414
D9594
D9725
D9925
D9A56
D9C96
D9C18
D9E58
D9G88
D9J18
425
475
575
675
775
875
1025
690
830
990
1115
1250
1540
1660
1000
1500
2000
2500
3000
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
48 x 61
48 x 67
48 x 80
48 x 93
48 x 106
48 x 120
48 x 139
60 x 65
60 x 77
60 x 91
60 x 101
60 x 112
60 x 139
60 x 147
72 x 66
72 x 96
72 x 124
72 x 153
72 x 182
90 x 47
90 x 66
90 x 84
90 x 103
90 x 121
90 x 140
90 x 158
90 x 177
90 x 196
90 x 214
90 x 233
5/32
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
3/16
3/16
3/16
3/16-1/4
3/16-1/4
3/16-5/16
3/16-5/16
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
172
188
207
238
250
272
306
331
356
380
405
429
478
499
488
560
641
720
806
557
613
693
763
853
947
1071
1183
1339
1489
1596
24
30
32
38
42
48
60
72
90
7 1/8
10 1/8
11
14
16
19
24 3/4
30
40
4 7/8
4 7/8
5
5
5
5
5 1/4
6
5
5
5
5
5
5
5
4 1/2
6
5
1
1 1/2
2
3
3
4
6
7 1/4
8 3/4
B
D
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
E2353
E2613
E2793
E3283
E3443
E3623
E4263
E4403
E4553
E4693
E4793
E5323
E5423
E5533
E5633
E5774
E6364
E6454
E6534
E6624
E6704
E6794
E7374
E7444
E7504
E7574
60
110
135
70
120
170
75
125
175
225
245
145
195
245
295
345
205
255
305
355
405
435
285
335
385
435
24 x 44
24 x 70
24 x 84
30 x 37
30 x 53
30 x 71
32 x 36
32 x 50
32 x 65
32 x 79
32 x 85
38 x 44
38 x 54
38 x 65
38 x 75
38 x 85
42 x 48
42 x 57
42 x 65
42 x 74
42 x 82
42 x 87
48 x 51
48 x 58
48 x 64
48 x 71
1/8
1/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
32
44
67
49
61
74
50
63
76
89
96
73
87
99
111
154
107
119
131
143
155
161
133
146
154
172
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
E7644
E7814
E7944
E7A74
E7B84
E8534
E8654
E8814
E8934
E8A54
E8B74
E8C94
E8D54
E8D64
E8E74
E8F14
EF564
EF704
EF894
EFA34
EFB84
EFD24
EFE74
EFG54
EFI04
485
585
685
785
870
590
735
875
1020
1165
1305
1450
1515
1590
1735
1775
750
1000
1250
1500
1750
2000
2250
2500
2750
48 x 78
48 x 91
48 x 104
48 x 117
48 x 128
60 x 65
60 x 77
60 x 89
60 x 101
60 x 113
60 x 125
60 x 137
60 x 143
60 x 149
60 x 161
60 x 165
72 x 71
72 x 85
72 x 100
72 x 114
72 x 129
72 x 143
72 x 158
72 x 172
72 x 187
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
185
211
237
263
285
395
421
448
474
501
527
554
567
580
606
615
560
594
639
672
708
741
777
820
855
NOMINAL
CAPACITY
(GAL.)
EC184
EC364
EC554
EC675
EC885
EC996
ECC36
ECD37
ECG07
ECI67
ECL37
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
DIAMETER
X HEIGHT
(IN.)
90
90
90
90
90
90
90
90
90
90
90
x
x
x
x
x
x
x
x
x
x
x
58
71
90
109
127
146
164
183
202
220
239
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
3/16
3/16
3/16-1/4
3/16-1/4
3/16-5/16
3/16-5/16
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
3/16-3/8
1145
1205
1290
1370
1530
1635
1765
1890
2100
2230
2340
NOTE: 90 diameter tanks 2000 gallon and below, have two lifting lugs. All other 90"
tanks have three lugs included.
NOMINAL
CAPACITY
(GAL.)
250
450
650
450
650
850
1050
1250
1450
650
850
1050
1250
1450
1650
1850
2050
2250
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
48 x 55
48 x 81
48 x 107
60 x 62
60 x 79
60 x 96
60 x 113
60 x 130
60 x 147
72 x 64
72 x 76
72 x 88
72 x 100
72 x 112
72 x 124
72 x 136
72 x 148
72 x 160
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32-1/4
7/32-1/4
7/32-1/4
7/32-1/4
178
227
272
372
421
419
453
488
522
430
458
487
516
545
584
620
656
693
12
CONSTRUCTION NOTES:
30 Cone bottom skirted tanks are supported by an extension of the sidewall and feature one 5 radius scallop for
plumbing access. Larger scallops are available upon request.
Standard clearance from the bottom of the cone to the floor is 12. Clearances to meet specific customer requirements
are available at no additional cost but must be specified at the time of the order.
Tanks are supplied in natural resin color. Specific color options are available at additional cost.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
C34-25C
C34-45C
C34-65C
C35-45C
C35-65C
C35-85C
C35-105C
C35-125C
C35-145C
C36-65C
C36-85C
C36-105C
C36-125C
C36-145C
C36-165C
C36-185C
C36-205C
C36-225C
250
450
650
450
650
850
1050
1250
1450
650
850
1050
1250
1450
1650
1850
2050
2250
48 x 58
48 x 84
48 x 110
60 x 66
60 x 83
60 x 100
60 x 117
60 x 134
60 x 151
72 x 70
72 x 82
72 x 94
72 x 106
72 x 118
72 x 130
72 x 142
72 x 154
72 x 166
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32-1/4
7/32-1/4
7/32-1/4
7/32-1/4
175
240
265
408
457
466
500
534
569
497
524
555
584
613
652
688
724
761
12
C34-250L
C34-450L
C34-650L
C35-450L
C35-650L
C35-850L
C35-1050L
C35-1250L
C35-1450L
C36-650L
C36-850L
C36-1050L
C36-1250L
C36-1450L
C36-1650L
C36-1850L
C36-2050L
C36-2250L
C37-1500L
C37-2000L
C37-2500L
C37-3000L
C37-3500L
C37-4000L
NOMINAL
CAPACITY
(GALS.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL THICK.
(IN.)
APPROX.
WEIGHT
(LBS.)
PIPE
SIZE
(IN.)
LEG LENGTH
FOR 0"
CLEARANCE
250
450
650
450
650
850
1050
1250
1450
650
850
1050
1250
1450
1650
1850
2050
2250
1500
2000
2500
3000
3500
4000
48 x 44
48 x 70
48 x 96
60 x 51
60 x 68
60 x 85
60 x 102
60 x 119
60 x 136
72 x 55
72 x 67
72 x 79
72 x 91
72 x 103
72 x 115
72 x 127
72 x 139
72 x 151
90 x 74
90 x 92
90 x 111
90 x 129
90 x 148
90 x 166
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
3/16
3/16
3/16-1/4
3/16-1/4
3/16-1/4
3/16-5/16
182
215
281
366
401
435
477
503
538
450
479
508
537
566
595
624
653
682
865
925
1017
1079
1213
1338
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
19
19
19
26
26
26
26
26
26
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
32
32
32
32
32
32
NOMINAL
CAPACITY
(GALS.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL THICK.
(IN.)
APPROX.
WEIGHT
(LBS.)
PIPE
SIZE
(IN.)
LEG LENGTH
FOR 0"
CLEARANCE
C34-25CL
C34-45CL
C34-65CL
C35-45CL
C35-65CL
C35-85CL
C35-105CL
C35-125CL
C35-145CL
C36-65CL
C36-85CL
C36-105CL
C36-125CL
C36-145CL
C36-165CL
C36-185CL
C36-205CL
C36-225CL
C37-150CL
C37-200CL
C37-250CL
C37-300CL
C37-350CL
C37-400CL
250
450
650
450
650
850
1050
1250
1450
650
850
1050
1250
1450
1650
1850
2050
2250
1500
2000
2500
3000
3500
4000
48 x 47
48 x 73
48 x 99
60 x 55
60 x 72
60 x 89
60 x 106
60 x 123
60 x 140
72 x 61
72 x 73
72 x 85
72 x 97
72 x 109
72 x 121
72 x 133
72 x 145
72 x 157
90 x 81
90 x 99
90 x 118
90 x 136
90 x 155
90 x 173
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
3/16
3/16
3/16-1/4
3/16-1/4
3/16-1/4
3/16-5/16
187
215
272
426
458
489
521
560
592
534
558
587
614
640
667
694
721
748
1022
1072
1154
1236
1336
1432
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
19
19
19
26
26
26
26
26
26
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
32
32
32
32
32
32
MIX TANKS
MIX TANKS
The Mix Tank line was developed to meet the more stringent performance requirements of industrial mixing applications.
Offered in three styles, this series of tanks is a heavy-walled version of the standard line and features an external flanged lip which
can accommodate mixers weighing up to 250 pounds.
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
J2273
J2403
J3364
J3454
J4394
J4454
J4524
J5404
J5454
J5514
J6425
J6475
J6515
J7456
J7516
J7586
J7656
J8366
J8456
J8536
J8636
JF385
JF526
JF678
JF818
50
75
100
125
125
150
175
200
225
250
250
275
300
350
400
450
500
500
600
700
800
750
1000
1250
1500
24 x 29
24 x 42
30 x 38
30 x 47
32 x 39
32 x 47
32 x 54
38 x 44
38 x 49
38 x 54
42 x 45
42 x 50
42 x 54
48 x 49
48 x 55
48 x 62
48 x 69
60 x 45
60 x 54
60 x 62
60 x 70
72 x 46
72 x 60
72 x 75
72 x 89
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
1/4
1/4
1/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
1/4
9/32
3/8
3/8
45
53
65
78
73
84
105
104
110
117
127
143
148
183
199
216
230
257
283
306
335
345
406
526
589
FLAT BOTTOM
MIX TANKS
PART NO.
NOMINAL
CAPACITY
(GAL.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL
THICKNESS
(IN.)
APPROX.
WEIGHT
(LBS.)
K2433
K2563
K3524
K3614
K4534
K4614
K4684
K5594
K5644
K5704
K6595
K6645
K6685
K7646
K7706
K7816
K7886
K8636
K8716
K8806
K8886
KF656
KF807
KF949
KFA9A
50
75
100
125
125
150
175
200
225
250
250
275
300
350
400
450
500
500
600
700
800
750
1000
1250
1500
24 x 43
24 x 56
30 x 52
30 x 61
32 x 53
32 x 61
32 x 68
38 x 59
38 x 64
38 x 70
42 x 59
42 x 64
42 x 68
48 x 64
48 x 70
48 x 77
48 x 84
60 x 63
60 x 71
60 x 80
60 x 88
72 x 65
72 x 80
72 x 94
72 x 109
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
1/4
1/4
1/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
13/32
15/32
55
63
85
94
95
104
112
130
136
144
167
176
183
237
250
276
292
365
391
414
437
494
590
749
882
MIX TANKS
DISH BOTTOM W/LEG RING
flanged lip included
OPEN TOP
PART NO.
NOMINAL
CAPACITY
(GALS.)
DIAMETER
X HEIGHT
(IN.)
APPROX.
WALL THICK.
(IN.)
APPROX.
WEIGHT
(LBS.)
M2253
M2383
M3354
M3444
M4354
M4424
M4504
M5384
M5434
M5494
M6395
M6445
M6485
M7426
M7486
M7556
M7626
M8356
M8446
M8526
M8606
MF396
MF547
MF689
MF83A
50
75
100
125
125
150
175
200
225
250
250
275
300
350
400
450
500
500
600
700
800
750
1000
1250
1500
24 x 31
24 x 44
30 x 40
30 x 49
32 x 41
32 x 49
32 x 56
38 x 47
38 x 52
38 x 58
42 x 47
42 x 52
42 x 56
48 x 52
48 x 58
48 x 65
48 x 72
60 x 49
60 x 58
60 x 66
60 x 74
72 x 51
72 x 66
72 x 80
72 x 95
5/32
5/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
7/32
1/4
1/4
1/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
13/32
15/32
66
74
96
105
105
112
121
144
150
158
181
189
196
239
252
268
285
407
433
456
479
552
631
756
873
PIPE
SIZE
(IN.)
1
1
1
1
1
1
1
1/2
1/2
1/2
1/2
1/2
1/2
1/2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
LEG LENGTH
FOR 0"
CLEARANCE
6
6
7
7
8
8
8
1/4
1/4
1/2
1/2
1/2
1/2
1/2
10
10
10
10
10
10
12 1/4
12 1/4
12 1/4
12 1/4
17 3/4
17 3/4
17 3/4
17 3/4
18 3/4
18 3/4
18 3/4
18 3/4
A
B
TANK
PART.
NO.
A
DIA.
(IN.)
B
DIM.
(IN.)
DIM.
(IN.)
5108B
5109B
5110B
5111B
5112B
5113B
5114B
5115B
5303B
5150I
7007B
23
24
30
32
38
42
48
60
72
90
96
2
2
2
2
2
2
2
2
2 1/4
2 3/4
2 1/2
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
23
24
30
32
38
42
48
60
72
90
8
SOLID
SOLID
COVER
WITH
CUTOUT
HINGED
HINGED
COVER
HINGED
WITH
CUTOUT
WITH
MFG. PAD
5108I
5109I
5110I
5111I
5112I
5113I
5114I
5115I
5303I
5164I*
7007I
NA
5109C
5110C
5111C
5112C
5113C
5114C
5115C
5303C
5164C*
NA
5108F
5109F
5110F
5111F
5112F
5113F
5114F
5115F
5303F
5239F*
7007F
NA
5109H
5110H
5111H
5112H
5113H
5114H
5115H
5303H
5164H*
NA
NA
5109G
5110G
5111G
5112G
5113G
5114G
5115G
5303G
5164G*
NA
Solid
Solid w/
Shaft Cutout
Hinged
Hinged w/
Shaft Cutout
Agitator Supports
90 diameter tanks utilize a primed carbon
steel agitator support constructed from two
6 x 8.2 lb./ft. channels and feature a 15
square mounting plate. Agitator supports
designed to be used on an annular domed
top tank require four (4) steel legs for
clearance. When ordering include part
numbers for support and legs.
Supports for 72 diameter tanks are
constructed from two 4 x 7.25 lb./ft.
channels and feature a 12 square mounting
plate.
Engineering assistance is available from the
factory to meet custom applications and for
larger tanks or special installations.
Tank
Dia. (in.)
24
30
32
38
42
48
60
Part
No.
5195C
5195D
5195E
5195F
5195G
5195H
5195J
24 - 60 Diameter
72 and 90 Diameter
Annular Domed Top
Support w/Legs
Tank
Part
Dia. (in.)
No.
72
5314R
90
5278R
Leg
Part No.*
5315R
5279R
Ordering Guidelines
When ordering specify number of
baffles per tank, length of each
baffle, and number of gussets per
baffle.
Typical baffle length will equal
sidewall length minus 3 for
32- 72, sidewall length minus 12
for 90 diameter.
Top and bottom gussets should be
located within 3- 6 of end of
baffles. Distance between gussets
should not exceed 60.
Baffle Plate
Gusset
Tank
Dia.
Baffle
Part #
32
38
42
48
60
72
90
5159E
5159F
5159G
5159H
5159J
5159K
5159L
Agitation Direction
Baffle
Width
A
3
3
4
4
6
6
8
Baffle
Thick.
B
1/4
1/4
1/4
1/4
3/8
3/8
3/8
Gusset
Part No.
5158E
5158F
5158G
5158H
5158J
5158K
5158L
60
Max
SECTIONALIZED TANKS
Centrifugally Cast Sectionalized Fiberglass Tanks
Our unique sectionalized fiberglass tank provides an excellent option for retrofit
applications such as solar energy storage and domestic fire protection systems.
Part
No.
S42-150
S42-300
S42-450
S48-200
S48-400
S48-600
S48-800
Nominal
Dia. x Ht. Capacity
Total
(in.)
(gals.)
Sections
42 x 29
42 x 55
42 x 81
48 x 29
48 x 55
48 x 81
48 x 107
150
300
450
200
400
600
800
1
2
3
1
2
3
4
Approx.
Weight
(lbs.)
Approx.
Thick.
(in.)
75
107
139
101
137
173
209
5/32
5/32
5/32
5/32
5/32
5/32
5/32
Modular design allows for storage up to 800 gallons with a tank capable of passing through a 30 door.
Factory pre-sanded sections can be assembled on site with no special equipment or training.
Tanks include adhesive kit and installation instructions.
Sectionalized tanks are not recommended for the storage of highly aggressive chemicals or for use in
food grade applications.
Available in either isophthalic polyester or vinylester resins.
SECTIONALIZED TANKS
INSTALLATION INSTRUCTIONS
Mix vinylester adhesive per instructions enclosed with kit. Butter bonding surfaces on spigot joint (base) and bell portion (top) with material, making sure
all pre-sanded surfaces are evenly covered.
CAUTION! The following chart is intended to be used as a guide only. Variations in mold taper and head preparation will affect
actual dimensions. For applications requiring strict tolerances contact the factory for details. .
TANK
GALS. /
DOME
FLANGE LIP
DIAMETER
IN
GALS.
8'
31.3
425
20
240
8*
9'
39.6 '
630
23
300
10'
48.9
875
25
370
12'
70.5
1340
28
600
14
95.9
1900
31
858
HT. (IN.)
GALS.
HT. (IN.)
*NOTE: The 8' is also available in an external flange lip. Height of the external
lip is 6". Capacity of the external 8' lip is 235 gallons.
CAUTION! The following chart is intended to be used as a guide only. Variations in mold taper and head preparation will affect actual
dimensions. For applications requiring strict tolerances contact the factory for details.
23
24
30
32
38
42
48
60
72
90
96
108
120
144
168
22.60
24.25
29.25
32
38
42
48
60
72
90
96
108
120
144
168
1.70
1.94
2.84
3.41
4.84
5.89
7.65
11.9
17.26
27
31.3
39.6
48.9
70.5
95.9
7
11
16
19
32
30
70
152
215
310
240
300
370
600
858
5
6
6
6
7
6
10
14.5
13.5
10
8
8
8
9
9
11
12
21
29
46
59
85
165
192
390
NA
NA
NA
NA
NA
9
9
10
11
13
13
15
20.5
19
21.25
NA
NA
NA
NA
NA
NA
14
23
31
49
65
93
180
222
444
470
670
910
NA
NA
NA
12
14.2
15
17.75
19
21.75
27.62
29.5
33.87
34
35
42
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
608
670
1000
1320
2180
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
50
55
62
67
79
NA
NA
11
16
23
38
55
74
165
253
330
NA
NA
NA
NA
NA
NA
6.5
7
8
10.5
12
13
18.25
20.5
20.25
NA
NA
NA
NA
NA
NA
12
21
29
46
59
85
165
192
390
425
630
875
NA
NA
NA
9
10
11
13
13
15
20.5
19
21.25
20
23
25
NA
NA
SPECIFICATIONS
Using chop-hoop filament wound fabrication,
fiberglass reinforced plastic tank walls manufactured by Design Tanks meet or exceed the design
criteria of ASTM D 3299-00.
Our standard storage vessels are designed for
liquids with a specific gravity of up to 1.3. Tanks
designed to hold heavier materials are available
upon request.
Chop-hoop filament wound tanks can be manufactured for food grade applications depending
on resin selection.
42,000
2,400,000
58,000
1,800,000
AXIAL DIRECTION
Tensile Strength PSI
Tensile Modulus PSI
Flexural Strength PSI
Flexural Modulus PSI
13,500
1,450,000
33,600
1,330,000
9'
6"
10'
7"
12'
9"
14'
10"
F082OT
2000
1/4
720
F1010OT
10000
F092OT
2000
1/4
778
F1210OT
10000
1/4 - 3/8
1635
F083OT
3000
1/4
860
F1410OT
10000
1/4 - 5/16
1770
F093OT
3000
1/4
908
F1012OT
12000
1/4 - 7/16
2190
F084OT
4000
1/4
1000
F1212OT
12000
1/4 - 3/8
1940
F094OT
4000
1/4
1033
F1412OT
12000
1/4 - 5/16
2003
F104OT
4000
1/4 - 9/32
875
F1014OT
14000
1/4 - 1/2
2620
F085OT
5000
1/4 - 9/32
1220
F1214OT
14000
1/4 - 7/16
2290
F095OT
5000
1/4
1157
F1414OT
14000
1/4 - 5/16
2357
F105OT
5000
1/4 - 9/32
1006
F1015OT
15000
1/4 - 1/2
2900
F086OT
6000
1/4 - 9/32
1410
F1215OT
15000
1/4 - 7/16
2475
F096OT
6000
1/4 - 5/16
1327
F1415OT
15000
1/4 - 3/8
2490
F106OT
6000
1/4 - 11/32
1136
F1216OT
16000
1/4 - 7/16
2660
F126OT
6000
1/4 - 5/16
1110
F1416OT
16000
1/4 - 3/8
2618
F087OT
7000
1/4 - 9/32
1610
F1218OT
18000
1/4 - 1/2
3075
F097OT
7000
1/4 - 5/16
1498
F1418OT
18000
1/4 - 3/8
2775
F107OT
7000
1/4 - 11/32
1280
F1220OT
20000
1/4 - 1/2
3305
F127OT
7000
1/4 - 5/16
1230
F1420OT
20000
1/4 - 1/2
3054
F147OT
7000
1/4
1476
F1221OT
21000
1/4 - 1/2
3525
F088OT
8000
1/4 - 11/32
1830
F1421OT
21000
1/4 - 1/2
3232
F098OT
8000
1/4 - 3/8
1662
F1222OT
22000
1/4 - 9/32
4210
F108OT
8000
1/4 - 11/32
1447
F1422OT
22000
1/4 - 1/2
3430
F128OT
8000
1/4 - 5/16
1350
F1225OT
25000
1/4 - 5/8
5275
F148OT
8000
1/4
1550
F1425OT
25000
1/4 - 9/16
4103
F109OT
9000
1613
F1230OT
30000
1/4 - 23/32
6675
F129OT
9000
1/4 - 5/16
1493
F1430OT
30000
1/4 - 5/8
5127
F149OT
9000
1/4 - 5/16
1655
1/4 - 7/16
1788
F082DT
2000
1/4
840
F1010DT
10000
1/4 - 7/16
1988
F092DT
2000
1/4
850
F1210DT
10000
1/4 - 5/16
1910
F083DT
3000
1/4
980
F1410DT
10000
1/4 - 5/16
2105
F093DT
3000
1/4
974
F1012DT
12000
1/4 - 7/16
2390
F084DT
4000
1/4
1140
F1212DT
12000
1/4 - 3/8
2215
F094DT
4000
1/4
1098
F1412DT
12000
1/4 - 5/16
2337
F104DT
4000
1/4 - 9/32
1075
F1014DT
14000
1/4 - 1/2
2820
F085DT
5000
1/4 - 9/32
1280
F1214DT
14000
1/4 - 7/16
2565
F095DT
5000
1/4
1223
F1414DT
14000
1/4 - 3/8
2614
F105DT
5000
1/4 - 9/32
1206
F1015DT
15000
1/4 - 1/2
3100
F086DT
6000
1/4 - 9/32
1520
F1215DT
15000
1/4 - 7/16
2750
F096DT
6000
1/4 - 5/16
1384
F1415DT
15000
1/4 - 3/8
2745
F106DT
6000
1/4 - 11/32
1336
F1216DT
16000
1/4 - 7/16
2935
F126DT
6000
12' x 8'5"
1/4 - 5/16
1375
F1416DT
16000
1/4 - 3/8
2894
F087DT
7000
1/4 - 9/32
1710
F1218DT
18000
1/4 - 1/2
3350
F097DT
7000
1/4 - 5/16
1549
F1418DT
18000
1/4 - 3/8
3208
F107DT
7000
1/4 - 11/32
1480
F1220DT
20000
1/4 - 1/2
3580
F127DT
7000
12' x 9'7"
1/4 - 5/16
1500
F1420DT
20000
1/4 - 1/2
3465
F147DT
7000
1/4
1767
F1221DT
21000
1/4 - 1/2
3800
F088DT
8000
1/4 - 11/32
1900
F1421DT
21000
1/4 - 1/2
3683
F098DT
8000
1/4 - 3/8
1715
F1222DT
22000
1/4 - 9/32
4410
F108DT
8000
1647
F1422DT
22000
1/4 - 1/2
3794
F128DT
8000
1/4 - 5/16
1625
F1225DT
25000
1/4 - 5/8
5550
F148DT
8000
1/4
1876
F1425DT
25000
1/4 - 9/16
4540
F109DT
9000
1/4 - 11/32
1813
F1230DT
30000
1/4 - 23/32
6950
F129DT
9000
1/4 - 5/16
1768
F1430DT
30000
1/4 - 5/8
5548
F149DT
9000
1/4 - 5/16
1983
30 CONE BOTTOM
CHOP-HOOP FILAMENT WOUND 30 CONE BOTTOM FIBERGLASS TANKS
30 CONE - OPEN TOP
NOMINAL
OPEN TOP
PART NO.
C38-2MO
C39-2MO
C38-3MO
C39-3MO
C38-4MO
C39-4MO
C310-4MO
C38-5MO
C39-5MO
C310-5MO
C38-6MO
C39-6MO
C310-6MO
C39-7MO
C310-7MO
C39-8MO
C310-8MO
C310-9MO
C310-10MO
CAPACITY
(GAL.)
WALL*
DIA. X HEIGHT
(IN.)
APPROX.
THICK.
(IN.)
WEIGHT
(LBS.)
NO. OF
LEGS
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
6000
6000
6000
7000
7000
8000
8000
9000
10000
8 x 71
9 x 63
8 x 99
9 x 84
8 x 125
9 x 106
10 x9'3
8 x 151
9 x 127
10 x 11'0
8 x 179
9 x 148
10 x 128
9 x 169
10 x 14'5
9 x 1811
10 x 16'1
10 x 17'9
10 x 19'6
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4-5/16
1/4
1/4
1/4-5/16
1/4-5/16
1/4-5/16
1/4-5/16
1/4-5/16
1/4-3/8
1/4-5/16
1/4-5/16
1/4-5/16
1280
784
1430
914
1570
1039
2230
1710
1164
2340
1950
1323
2450
1489
2560
1658
2720
2860
3010
4
4
4
4
4
4
6
4
6
6
4
6
6
6
6
8
8
8
8
30 CONE BOTTOM
CHOP-HOOP FILAMENT WOUND 30 CONE BOTTOM FIBERGLASS TANKS
30 CONE - CLOSED TOP
30 cone bottom tanks are supported
by a fiberglass encapsulated steel leg
ring which will accept threaded steel
pipe legs.
8 diameter open top tanks include an
external flanged lip. 9' and 10
diameter tanks include an internal
flanged lip.
Closed top tanks are designed for
atmospheric pressure only and must
be vented.
Standard tank designed for 1.3
specific gravity material. 1.8 and 2.1
versions are available upon request.
Seismic Zone design requires special
consideration. Contact
Engineering for full assistance.
NOMINAL
OPEN TOP
PART NO.
C38-2MC
C39-2MC
C38-3MC
C39-3MC
C38-4MC
C39-4MC
C310-4MC
C38-5MC
C39-5MC
C310-5MC
C38-6MC
C39-6MC
C310-6MC
C39-7MC
C310-7MC
C39-8MC
C310-8MC
C310-9MC
C310-10MC
CAPACITY
(GAL.)
WALL*
DIA. X HEIGHT
(IN.)
APPROX.
THICK.
(IN.)
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
6000
6000
6000
7000
7000
8000
8000
9000
10000
8 x
9 x
8 x
9 x
8 x
9 x
10 x
8 x
9 x
10 x
8 x
9 x
10 x
9 x
10 x
9 x
10 x
10 x
10 x
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4-5/16
1/4
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4
1/4-3/8
1/4-5/16
1/4-5/16
1/4-5/16
78
69
104
810
130
110
911
158
131
117
184
152
13'3
173
15'0
195
16'8
18'5
20'1
WEIGHT
(LBS.)
NO. OF
LEGS
1340
830
1480
955
1620
1086
2350
1760
1209
2460
1980
1334
2570
1514
2680
1686
2830
2970
3120
4
4
4
4
4
4
6
4
6
6
4
6
6
6
6
8
8
8
8
30 CONE BOTTOM
CONE BOTTOM
TANK
DIAMETER
SIDEWALL
GAL./INCH
30
CONE
CAP. (GALS.)
80
90
100
31.3
39.6
48.9
470
670
910
CLEARANCE
LEG LENGTH
(IN.)
34
35
42"
Fiberglass encapsulated
steel leg ring
Welded steel coupling
Fiberglass
laminate
Welded steel
coupling
EXAMPLE: Legs for an 8 diameter 6000 gallon tank (part #C38-6MC) with a
24 clearance from bottom of cone to the floor would be ordered as follows:
Number of legs required = 4
Leg length = 0 clearance
+ required clearance
34+24
Correct order would be (4) 58 tall legs.
45 CONE BOTTOM
CHOP-HOOP FILAMENT WOUND 45 CONE BOTTOM FIBERGLASS TANKS
OPEN TOP
PART NO.
C47-1.5MO
C47-2MO
C48-2MO
C49-2MO
C47-2.5MO
C47-3MO
C48-3MO
C49-3MO
C47-3.5MO
C47-4MO
C48-4MO
C49-4MO
C410-4MO
C48-5MO
C49-5MO
C410-5MO
C48-6MO
C49-6MO
C410-6MO
C412-6MO
C49-7MO
C410-7MO
C412-7MO
C49-8MO
C410-8MO
C412-8MO
C410-9MO
C412-9MO
C410-10MO
C412-10MO
C412-11MO
C412-12MO
C412-13MO
C412-14MO
NOMINAL
CAPACITY
(GAL.)
1500
2000
2000
2000
2500
3000
3000
3000
3500
4000
4000
4000
4000
5000
5000
5000
6000
6000
6000
6000
7000
7000
7000
8000
8000
8000
9000
9000
10000
10000
11000
12000
13000
14000
+90 x
+90 x
8 x
9 x
+90 x
+90 x
8 x
9 x
+90 x
+90 x
8 x
9 x
10 x
8 x
9 x
10 x
8 x
9 x
10 x
12' x
9 x
10 x
12' x
9 x
10 x
12' x
10 x
12' x
10 x
12' x
12' x
12' x
12' x
12' x
87
106
84
710
124
143
11
911
161
180
138
120
10'8
164
141
12'4
190
163
141
118
184
15'9
12'10
205
17'6
14'0
19'2
152
20'10
164
177
189
19'11
211
WALL*
THICK.
(IN.)
3/16
3/16
1/4
1/4
3/16-1/4
3/16-1/4
1/4
1/4
3/16-5/16
3/16-5/16
1/4
1/4
1/4
1/4-5/16
1/4
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4-3/8
1/4-5/16
1/4-5/16
1/4-5/16
1/4-5/16
1/4-5/16
1/4-3/8
1/4-3/8
1/4-3/8
1/4-3/8
1/4-3/8
APPROX.
WEIGHT
(LBS.)
NO. OF
LEGS
1050
4
1130
4
1190
4
645
4
1230
4
1320
4
1330
4
770
4
1410
4
1580
4
1478
4
896
4
2060
6
1620
4
1019
6
2170
6
1840
4
1149
6
2280
6
2970
8
1331
6
2390
6
3070
8
1496
8
2540
8
3170
8
2680
8
3370
8
2820
8
3550
#4
3680
#4
3810
#4
4050
#4
4210
#4
* Wall thickness is stepped.
45 CONE BOTTOM
CHOP-HOOP FILAMENT WOUND 45 CONE BOTTOM FIBERGLASS TANKS - CONTINUED
45 cone bottom tanks are
supported by a fiberglass
encapsulated steel leg ring
which will accept threaded
steel pipe legs or steel I-beams
depending on capacity.
8 diameter open top tanks
include external flanged lips.
9', 10 and 12' diameter tanks
include internal lips.
Closed top tanks are designed
for atmospheric pressure only
and must be vented.
Standard tank designed for 1.3
specific gravity material. 1.8
and 2.1 versions are available
upon request.
Seismic Zone design requires
special consideration. Contact
Engineering for full
assistance.
OPEN TOP
PART NO.
C47-1.5MC
C47-2MC
C48-2MC
C49-2MC
C47-2.5MC
C47-3MC
C48-3MC
C49-3MC
C47-3.5MC
C47-4MC
C48-4MC
C49-4MC
C410-4MC
C48-5MC
C49-5MC
C410-5MC
C48-6MC
C49-6MC
C410-6MC
C412-6MC
C49-7MC
C410-7MC
C412-7MC
C49-8MC
C410-8MC
C412-8MC
C410-9MC
C412-9MC
C410-10MC
C412-10MC
C412-11MC
C412-12MC
C412-13MC
C412-14MC
NOMINAL
CAPACITY
(GAL.)
1500
2000
2000
2000
2500
3000
3000
3000
3500
4000
4000
4000
4000
5000
5000
5000
6000
6000
6000
6000
7000
7000
7000
8000
8000
8000
9000
9000
10000
10000
11000
12000
13000
14000
DIMENSIONS
DIA. X HEIGHT
(IN.)
+90 x
+90 x
8 x
9 x
+90 x
+90 x
8 x
9 x
+90 x
+90 x
8 x
9 x
10 x
8 x
9 x
10 x
8 x
9 x
10 x
12 x
9 x
10 x
12 x
9 x
10 x
12 x
10 x
12 x
10 x
12 x
12 x
12 x
12 x
12 x
93
112
89
84
130
149
115
105
167
186
141
126
113
169
148
130
195
169
148
125
1810
164
137
2011
181
149
199
1511
216
171
184
196
208
2110
3/16
3/16
1/4
1/4
3/16-1/4
3/16-1/4
1/4
1/4
3/16-5/16
3/16-5/16
1/4
1/4
1/4
1/4-5/16
1/4
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4-3/8
1/4-5/16
1/4-5/16
1/4-5/16
1/4-5/16
1/4-5/16
1/4-3/8
1/4-3/8
1/4-3/8
1/4-3/8
1/4-3/8
APPROX.
WEIGHT
(LBS.)
NO. OF
LEGS
1230
4
1300
4
1250
4
711
4
1400
4
1490
4
1380
4
836
4
1580
4
1750
4
1530
4
946
4
2180
6
1670
4
1090
6
2290
6
1830
4
1215
6
2400
6
3064
8
1384
6
2510
6
3170
8
1547
8
2620
8
3270
8
2780
8
3360
8
2920
8
3630
#4
3760
#4
3890
#4
4020
#4
4270
#4
* Wall thickness is stepped.
45 CONE BOTTOM
CONE BOTTOM
TANK
DIAMETER
90
8
9
10
12'
SIDEWALL
GAL./INCH
27
31.3
39.6
48.9
70.5
45
CONE
CAP. (GALS.)
608
670
1000
1320
2180
0" CLEARANCE
LEG LENGTH
(IN.)
50 3/8
54 1/2
62
68
79
STEEL LEGS
PIPE LEGS
I-BEAM LEGS
W8 x 28#
steel
I-Beam
Welded
coupling
4" diameter
steel pipe
Threaded
flange pad
Welded
flat plate
DISHED BOTTOM
CHOP-HOOP FILAMENT WOUND DISHED BOTTOM FIBERGLASS TANKS
DISHED BOTTOM - OPEN TOP
OPEN TOP
PART NO.
D8-2MO
D9-2MO
D8-3MO
D9-3MO
D8-4MO
D9-4MO
D10-4MO
D8-5MO
D9-5MO
D10-4MO
D8-6MO
D9-6MO
D10-6MO
D9-7MO
D10-7MO
D9-8MO
D10-8MO
D10-9MO
D10-10MO
NOMINAL
CAPACITY
(GAL.)
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
6000
6000
6000
7000
7000
8000
8000
9000
10000
DIMENSIONS
DIA. X HEIGHT
(IN.)
8 x 62
9 x 54
8 x 810
9 x 75
8 x 116
9 x 96
10 x 80
8 x 142
9 x 117
10 x 98
8 x 160
9 x 139
10 x 115
9 x 1510
10 x131
9 x 1711
10 x 149
10 x 166
10 x 182
WALL*
THICK.
(IN.)
APPROX.
WEIGHT
(LBS.)
NO. OF
LEGS
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4-5/16
1/4
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4
1/4-3/8
1/4-5/16
1/4-5/16
1/4-5/16
1195
1052
1350
1176
1495
1300
1120
1650
1425
1300
1900
1586
1490
1751
1670
1917
1920
2150
2360
4
4
4
4
4
4
6
4
6
6
4
6
6
6
6
8
8
8
8
DISHED BOTTOM
CHOP-HOOP FILAMENT WOUND DISHED BOTTOM FIBERGLASS TANKS - CONTINUED
DISHED BOTTOM - CLOSED TOP
Dished bottom 8, 9 and 10' diameter
tanks are available either open top or
closed top in capacities to 10,000 gallons.
8 open top tanks include a 1/2 thick x 2
3/4 wide external flanged lip. 9 and 10'
tanks have an internal flanged lip.
Closed top tanks are designed for atmospheric pressure only and must be vented.
Dished bottom chop-hoop filament
wound tanks are supported by a fiberglass
encapsulated steel leg ring and 4
diameter steel pipe legs.
Tanks include three lift lugs to facilitate
positioning of empty tank on site.
Seismic Zone design requires special
consideration. Contact
Engineering for full assistance.
OPEN TOP
PART NO.
NOMINAL
CAPACITY
(GAL.)
D8-2MC
D9-2MC
D8-3MC
D9-3MC
D8-4MC
D9-4MC
D10-4MC
D8-5MC
D9-5MC
D10-5MC
D8-6MC
D9-6MC
D10-6MC
D9-7MC
D10-7MC
D9-8MC
D10-8MC
D10-9MC
D10-10MC
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
6000
6000
6000
7000
7000
8000
8000
9000
10000
DIMENSIONS
DIA. X HEIGHT
(IN.)
8 x
9 x
8 x
9 x
8 x
9 x
10' x
8 x
9 x
10' x
8 x
9 x
10' x
9 x
10' x
9 x
10' x
10' x
10' x
68
510
94
711
12
1010
8'7"
148
121
10'3"
174
143
12'0"
164
13'8"
185
15'5"
17'1"
18'10"
WALL*
THICK.
(IN.)
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4-5/16
1/4
1/4
1/4-5/16
1/4-5/16
1/4
1/4-5/16
1/4
1/4-3/8
1/4-5/16
1/4-5/16
1/4-5/16
APPROX.
WEIGHT
(LBS.)
NO. OF
LEGS
1280
1117
1430
1242
1580
1368
2002
1730
1419
2182
1980
1621
2372
1803
2562
1968
2826
3046
3276
4
4
4
4
4
4
6
4
6
6
4
6
6
6
6
8
8
8
8
DISHED BOTTOM
DISH BOTTOM
TANK
DIAMETER
SIDEWALL
GAL./INCH
DISH
CAP. (GALS.)
0" CLEARANCE
LEG LENGTH
(IN.)
80
90"
100
31.3
39.6
48.9
425
630
875
20
23
25
Threaded steel
flange pad
150# ASA
bolting geometry
FLANGED CONNECTIONSFRP
FLANGED CONNECTIONS
Hand lay-up vinylester flanges with
stub pipe are available in sizes from 1
to 24 and are permanently bonded to
the tank. Flanges can be located either
above or below liquid level and can be
ordered in three different styles based
upon intended use.
NO.
PIPE
SIZE(IN.)
1
1 1/2
2
3
4
6
8
10
12
14*
18*
20*
24*
NON
GUSSET
6058B
6058C
6058D
6058F
6058G
6058H
6058J
6058K
6058L
6058M
6058P
6058R
6123I
BLADE CONICAL
GUSSET GUSSET
6174B 6269B
6174C 6269C
6174D 6269D
6174F 6269F
6174G 6269G
6174H 6269H
6174J
6269J
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
A DIM.
(IN.)
4 1/2
5 1/2
6 1/2
8
9 1/2
11 1/2
14
16 1/2
19 1/2
21 1/2
25 1/2
28
32 1/2
B DIM. C DIM.
(IN.)
(IN.)
3 1/8
5/8
3 7/8
5/8
4 3/4
3/4
6
3/4
7 1/2
3/4
9 1/2
7/8
11 3/4
7/8
14 1/4
1
17
1
18 3/4 1 1/8
22 3/4 1 1/4
25
1
29 1/2
1
D DIM. E DIM.
(IN.)
(IN.)
5/8
4
11/16
4
11/16
4
13/16
4
15/16
4
7/8
4
1
6
1 3/16
8
1 7/16
8
1 1/2
8
1 3/4
8
1
8
1 1/8
9
OF
HOLES
4
4
4
4
8
8
8
12
12
12
16
20
20
SEE NOTE
SEE NOTE
SEE NOTE
B
A
FLANGED CONNECTIONSFRP
NON-GUSSETED FLANGES
BLADE-GUSSETED FLANGES
CONICALLY-GUSSETED FLANGES
FLANGED CONNECTIONSFRP
SIPHON DRAIN FLANGES
NO.
PIPE
SIZE(IN.)
NON
GUSSET
BLADE
GUSSET
CONICAL
GUSSET
1 1/2
2
3
4
6
8
6122C
6122D
6122F
6122G
6122H
6122J
6175C
6175D
6175F
6175G
6175H
6175J
6270C 5 1/2
6270D 6 1/2
6270F
8
6270G 9 1/2
6270H 11 1/2
6270J
14
A DIM.
(IN.)
3 7/8
4 3/4
6
7 1/2
9 1/2
11 3/4
5/8
3/4
3/4
3/4
7/8
7/8
11/16
11/16
13/16
15/16
7/8
1
E DIM.
(IN.)
HOLES
4
4
4
4
4
6
4
4
4
8
8
8
OF
*NOTE: Bolts are not included with flanges unless a blind flange is also ordered. Column
listing number of bolt holes and size refers to maximum size that flange will accommodate
and does not necessarily reflect standard installation. See blind flanges below to
determine standard size bolts.
E
D
B
A
1
C
Available either non-gusseted (shown above)
or gusseted, siphon drains provide drainage
within 1 of tank bottom.
FLANGED CONNECTIONSFRP
SIDE BOTTOM DRAIN FLANGES
NO.
PIPE
SIZE(IN.)
NON
GUSSET
BLADE
GUSSET
CONICAL
GUSSET
A DIM.
(IN.)
1 1/2
2
3
4
6
8
6198C
6198D
6198F
6198G
6198H
6198J
6271C
6271D
6271F
6271G
6271H
6271J
5 1/2
6 1/2
8
9 1/2
11 1/2
14
3 7/8
4 3/4
6
7 1/2
9 1/2
11 3/4
5/8
3/4
3/4
3/4
7/8
7/8
11/16
11/16
13/16
15/16
7/8
1
4
4
4
4
4
6
E DIM.
(IN.)
HOLES
8
8
8 1/2
8 1/2
11
12
4
4
4
8
8
8
OF
C
D
BA
45
3
Min.
Bonding Leg
L
(inches)
Size
1 1/2
2
3
4
6
8
12
13
14
15
20
24
8
8
8
8
10
10
4
4
5
6
7
8
FLANGED CONNECTIONSFRP
BLIND FLANGES (Larger sizes available upon request)
PIPE SIZE (IN.)
1
1 1/2
2
3
4
6
8
10
12
14
18
20
24
PART NO.
5163B
5163C
5163D
5163F
5163G
5163H
5163J
5163K
5163L
5163M
5163P
5163R
5123B
Plywood
Stiffener
Covering
Laminate
NOTE: All blind flanges are installed with full face gaskets,
and stainless steel bolts, nuts, and washers. Bolting hardware
supplied for all sizes. Chemical compatability determines
gasket material, 1/8" thickness is standard.
COUPLINGSFRP
FULL AND HALF FRP COUPLINGS
PIPE
PART
NO.
PIPE
SIZE
(IN.)
6059B
6059C
6059D
6059E
6059F
6059G
6059H
6059J
6059K
1/2
3/4
1
1 1/2
2
2 1/2
3
4
6
FULL OR
HALF OD
(IN.)
1
1
1
2
1/4
5/8
7/8
1/2
3
3 3/8
4 3/8
5
7 1/4
FULL OR
HALF DIM.
A(IN.)
4
5
6
8
9
10
13
15
20
FULL
DIM.
B(IN.)
HALF
DIM.
D(IN.)
4
4
4
4
4
4
4
4
4
2
2
2
2
2
2
2
2
2
3/8
3/8
3/8
3/8
1/2
1/2
3/8
3/8
1/4
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
Fiberglass female pipe threaded couplings are bonded permanently into the tank
to eliminate potential leak problems. Full and half couplings are available in
sizes from 1/2 to 6 and can be located anywhere on the tank except the saddle
assembly contact area on horizontal fiberglass tanks.
Manufactured from corrosion-resistant vinylester resin.
Outside bonding area at the coupling is equal to or greater than tank wall
thickness.
Inside surface is sealed with 2 layers of 1 1/2 oz. glass mat and the same resin
as the tank wall on all tanks 60 diameter and larger. On smaller diameters
inside sealing may not be possible unless tank is equipped with a manway.
All side wall penetrations protrude as shown unless otherwise specified.
Bottom fittings are flush mounted for complete drainage.
Full couplings provide for internal piping. Please specify either full or half
when ordering.
1 1/2 minimum edge to edge of couplings.
2 minimum edge to bottom of tank.
Outside
Tank Wall
Outside
Tank Wall
D
BULKHEAD FITTINGSFRP
FIBERGLASS TANK BULKHEAD FITTINGS
DESCRIPTION
1/2
1/2 double thread
3/4
3/4 double thread
1
1 double thread
1 1/4
1 1/4 double thread
1 1/4 anti-vortex
1 1/2
1 1/2 double thread
1 1/2 anti-vortex
2
2 double thread
2 anti-vortex
INSTALLED
FITTING ASSEMBLIES
WITH
WITH
NITRILE
FLOUREL
GROMMET
GROMMET
5029IN
5029IF
5030IN
5030IF
5031IN
5031IF
5032IN
5032IF
5033IN
5033IF
5034IN
5034IF
5035IN
5035IF
5036IN
5036IF
5037IN
5037IF
5038IN
5038IF
5039IN
5039IF
5040IN
5040IF
5041IN
5041IF
5042IN
5042IF
5450IN
5450IF
REPLACEMENT
FITTING ASSEMBLIES
WITH
WITH
NITRILE
FLOUREL
GROMMET
GROMMET
5029AN
5029AF
5030AN
5030AF
5031AN
5031AF
5032AN
5032AF
5033AN
5033AF
5034AN
5034AF
5035AN
5035AF
5036AN
5036AF
5037AN
5037AF
5038AN
5038AF
5039AN
5039AF
5040AN
5040AF
5041AN
5041AF
5042AN
5042AF
5450AN
5450AF
Nut
Washer
Grommet
Washer
Fitting
Body
BULKHEAD FITTINGSFRP
REPLACEMENT PARTS
DESCRIPTION
1/2
1/2 double thread
3/4
3/4 double thread
1
1 double thread
1 1/4
1 1/4 double thread
1 1/4 anti-vortex
1 1/2
1 1/2 double thread
1 1/2 anti-vortex
2
2 double thread
2 anti-vortex
FITTING
BODY
5029R
5030R
5031R
5032R
5033R
5034R
5035R
5036R
5037R
5038R
5039R
5040R
5041R
5042R
5450R
WASHER
5046R
5046R
5046R
5046R
5046R
5046R
5047R
5047R
5047R
5047R
5047R
5047R
5047R
5047R
5047R
GROMMET
5044N
5044N
5044N
5044N
5044N
5044N
5045N
5045N
5045N
5045N
5045N
5045N
5045N
5045N
5045N
NITRILE
GROMMET
5044F
5044F
5044F
5044F
5044F
5044F
5045F
5045F
5045F
5045F
5045F
5045F
5045F
5045F
5045F
FLOUREL
NUT
5048R
5048R
5048R
5048R
5048R
5048R
5049R
5049R
5049R
5049R
5049R
5049R
5049R
5049R
5049R
NOTE: As in any gasketed fitting installation, grommets should be checked regularly and
replaced if leaks are detected.
PART NO.
6293D
6293G
6293J
A(IN.)
7 7/8
9 1/8
11 1/8
B(IN.)
1 5/8
2 3/4
4 3/4
C(IN.)
5
8 1/2
14
Mushroom vents are constructed from corrosion-resistant vinylester resin and are
permanently bonded directly to the top of the tank.
Vent screen to keep out birds and bugs is available upon request. Use of a screen
reduces vent capacity. Please contact the factory for recommendations and pricing.
A
Top of Tank
PART NO.
6155B
6155C
6155D
D (IN.)
9
13
15
H (IN.)
12
14
16
H Ref.
D
8 Ref.
2 Typ.
PART NO.
6155E
6155F
A (IN.)
21"
25"
B (IN.)
24"
32"
C (IN.)
12"
16"
VENTING INFORMATION
All closed top tanks must have a vent of equal or greater size than
the largest inlet or outlet. In addition to a standard vent, tanks being
loaded by air pressure must have a minimum 18 quick access
manway open and hold down lugs in use in order to prevent over
pressurization and potential failure. Precautions must also be taken
to avoid vacuum. If there is any question concerning the adequacy
of the venting system contact the factory for recommendations.
CAUTION!
All tanks are designed for atmospheric pressure only and
must be properly vented. Design Tanks, Inc. assumes no
liability for any tank vented improperly.
A
A
PART
NUMBER
5157B
5157C
5157D
5157G
5157H
5157J
5157K
Wall Clearance
2 Min.-4 Max.
Standard Projection
Brace Support
Part 5156I
Pipe Diameter
Brace
Support
To be determined
by customer
GUSSET
PART NO.
5158M
5158K
5158N
5158P
BAFFLE
PART NO.
5159M
5159K
5159N
5159P
BAFFLE
WIDTH W
8
8
10
10
Gusset
Baffle Plate
Typical Orientation
60
Max.
3/8
Baffle Length =
Wall Length
minus 12
INSTALLED*
DESCRIPTION
FILLWELL
FILLWELL
5 quarter-turn
5050I
10 quarter-turn
5079I
10 threaded
5479I
PART
COVERS
plain
w/splash guard
plain
w/splash guard
threaded
NUMBER
5051R
5052R
5080R
5082R
5478R
*NOTE: Part number represents installed fillwell only and does not include
a cover. Cover must be ordered separately from Fillwell Cover column.
5 Quarter Turn
Plain
5 Quarter Turn
w/ Splash Gaurd
PVC or Filled
Nylon
PVC or Filled
Nylon
10 Quarter Turn
Plain
10 threaded w/vent
Polypropylene
10 THREADED (VENTED)
REPLACEMENT PARTS
DESCRIPTION
5 quarter-turn
10 quarter-turn
10 threaded
REPLACEMENT COVER
FILLWELL
GASKET
5050R
5076R
5079R
5078R
5479R
5078R
FILLWELL
SEALANT
5105R
5105R
5105R
POP
RIVETS
(6)5075R
(8)5075R
(8)5075R
HOLE
SIZE
5 3/4
10 1/2
10 7/8
PART NO.
6118I
6119I
NO. BOLTS
8
8
X (IN.)
28 5/16
36 1/4
X
6
PART
NUMBER
5162I
5161J
5161K
5161R
Heavy duty fiberglass hold down lugs are designed for use in
highly-corrosive environments where there are mixing or wind
loading concerns.
Fiberglass hold down lugs are secured to pad by clamps.
Clamp anchoring bolts should be located after tank is mounted
on pad (bolts not included).
Lug is bonded permanently to tank sidewall with laminate
equal to or greater than tank wall thickness.
4 1/2
4 1/2
3/4
1/2
MOUNTING LUGS
Mounting lugs are available in galvanized steel or fiberglass and
are designed to bolt accessories (gauges, level indicators, etc.) to
the tank wall.
Attached to wall with hand-layed laminate equal to or greater
than wall thickness.
May be located on any style tank per customer specifications.
MOUNTING LUGS
Fiberglass
PART NO.
52141
6 maximum
distance
between
supports
EXAMPLE
Calculate ladder length, cage length, and required number of supports for a tank
that is 20 tall.
Ladder length = Tank height + 36
20 + 36 = 236
Cage length
= Ladder length - 70
236 - 70 = 166
Lugs Required = Tank height/6 (rounded up to next whole no.)
20/6 = 3.33 (round to 4) ladder requires 4 pair of lugs.
Ladder
Standoff
20 Mil Gray
Polyurethane/Utylon
Overcoat
Spray-on two part polyurethane foam, 2 to 2.5 pounds per
cubic foot density. R value is 7.8 per inch of thickness.
Overcoat consists of a two-part polyurethane base and a top
coat of Utylon material. Total thickness is approximately 20
mils.
Heating systems for fiberglass tanks are designed for temperature
Standard top coat color is gray.
maintenance only. Sketch above reflects one style of heating
Materials exhibit excellent weathering characteristics and
system.
good corrosion resistance.
Operate from 120 VAC power source with a low watt/in2 output.
Any damage resulting from handling or shipping should be
Enclosed, weatherproof NEMA 4 thermostat operates up to four
immediately repaired to avoid moisture entry.
panels in a parallel circuit.
Deep insulation gouges may be repaired with aerosol
To adequately design a system we require tank dimensions,
polyurethane foam.
anticipated minimum ambient temperature, wind velocity, and
Overcoat abrasion may be recoated with the Utylon elasthe desired minimum temperature of the contents.
tomer overcoat.
Alternate heating systems can be designed. In all cases, consult
If temperature is below 50F, an industrial grade RTV silicone
with factory for pricing.
caulking may be used.
NOTE: Other lower cost options may be available. Please consult with the factory.
TANK
DIA.
23-38
42-48
60
72
90
90
90
8
8
8
8
9
9
9
9
10
10
10
10
12
12
12
12
12
12
GAL. RANGE
To capacity
To capacity
To capacity
To capacity
0-2000
0-4000
0-6000
0-2000
0-4000
0-6000
0-8000
0-2500
0-5000
0-7500
0-10000
0-3500
0-7500
0-12000
0-15000
0-5000
0-10000
0-15500
0-21000
0-26000
0-30000
PART
NO.
5056I
5056I
5056I
5056I
5264I
5265I
5266I
5337I
5338I
5339I
5340I
5341I
5342I
5343I
5344I
5350I
5351I
5352I
5354I
5355I
5356I
5357I
5358I
5360I
5361I
GALLONAGE
INCREMENT
10
20
50
100
200
200
200
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
PARTS LIST
ITEM NO.
1
2
3
4
5
6
7
DESCRIPTION
Fiberglass Coupling*
PVC Close Nipple
PVC Angle Valve
PVC Male Adapter
PVC Pipe
PVC 90 Elbow
PVC Union, Socket, Socket
EXAMPLES:
SIGHT TUBE LENGTH
<10
10-1711
18-2311
NUMBER
OF
SUPPORTS
0
1
2
NOTE: When storing hazardous materials or located (tank) in a high traffic area,
an ultrasonic level transmitter is strongly recommended.