CONNOLS-AIR
WEATHERPROOF
LOUVRE
LEADER IN AIR DISTRIBUTION PRODUCTSWeatherproof Louvre
Model 30H 4
FEATURE
Model OLS 30H is designed
for intake and exhaust venti-
lation applications. Blades
are securely fastened at 30
degree angle and 60mm
centers for MAXIMUM y
WEATHER PROTECTION, {
(MAXIMUM FREE AREA and 4
MINIMUM PRESSURELOSS. Sis" ,
The blades are fixed to the
frames with aluminum rivets
from the back of the frames
and the frames are reinforced with concealed alurninum
angle plates so that no fixings are visible on the face. The
louvre is constructed of EXTRUDED ALUMINIUM and
provided an architecturally STREAMLINE APPEARANCE
to the interior and exterior of any building.
AVAILABILITY
Units are available is standard size at 300mm increments
Up to maximum width and height of 2000mm according
to the restrictions as follows
A. Height of opening
304mm maximum,
1200 mm maximum where B exceeds 1200mm
2000 mm maximum where B less than or equal
1200 mm
B. Width of opening 2000 mm maximum
Where larger sizes are required, sections are joined to-
gether with mullions.
Minimum vertical height is 300mm,
FINISHES.
Allextruded aluminum louvres are in standard
baked white enamed finish,
Other finishes are available on request.
ACCESSORIES
Bird and insect screens are available as a optional extra
in aluminum, stainless steel, galvanized steel or fabric
material. Unless advised otherwise aluminum insect
screen will be supplied.
‘ORDERING INSTRUCTIONS.
When ordering, pleased specify the horizontal dimen-
sion first followed by the vertical dimension. Indicate
‘whether bird or insect screen is required
APPLICATIONS.
‘The 30H louvres are used for intake and exhaust ventila-
tion applications in air-conditioned buildings. It may be
used as a decorative louvre in housing flats or office
buildings as its construction and attractive finished pro-
vide the necessary weather protection and beautiful
streamline appearance to the exterior of the building. t
may be modified slightly and fitted with hinges, locks or
‘other hardware to serve as hinged or removable panel.
For ventilation purpose it its recommended that the
‘minimum size of louvre be 300 x 300 mm, Duct-mount-
‘ed control damper should be used for control of fresh ait
intakes.
SPECIFICATION
The outside air weatherproof louvres shall be construct-
‘ed of extruded aluminum and blades shall be horizontal.
All outside air louvres shall be weatherproof and of mini-
mum size 300 x 300mm. The comers of the louvre
frames shall be reinforced with concealed aluminium
angle plates so that no fixing is visible on the face. The
blades shall be fixed to the frames with aluminum rivets
from the back of frames. The outside air louvres shall be
Model 30H as manufactured by Connols-Air () Pte Ltd.
Extemally manual driven duct-mounted control damper
shall be used for control of fresh air intake. Whether filter
or insect screens are required access shall be provided
for cleaning purpose.NOMINAL HEIGHT (nm)
4inch 30° Stationary Blade Louvre
FREE AREA (5Q FT)
NOMINAL ROTH fn) 1.
:
ooo
ccs{ oo |aceover|oat|ovoeo 99 ft
ooo :
oso ac faou| on [ovo an] aaa ”
‘STATIC PRESSURE DROP (Inches Water)
i
|
@ 8 GEaEs 3
Note: Intake Design Free Velocity <500fpm recommended. FREE AREA VELOCITY (FPM)
‘when minimum water penetration Is desired.Zan
CONNOLS-AIR (S) PTE LTD
3-B Joo Koon Circle, Singapore 629 034
Cert eee a es)
eee ici!