You are on page 1of 213

design worldwide partnership

B502 ff&e specification

Project No. : VN-08-379


Project Name : Le Meridien HCMC
Area Name/No. : Public Areas
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification

Project No. : VN-08-379


Project Name : Le Meridien HCMC
Area Name/No. : Main Lobby (ground floor)
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e schedule


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision :

Code Description Qty


CASEGOODS
ML-001 Coffee table @ Waiting area 4
UPHOLSTERY
ML-201 Sofa @ Waiting area 4
ML-201A Vinyl for Sofa @ Waiting area TBC
ML-201B Decorative cushion @ Sofa 16
ML-201B1 Fabric for Decorative cushion @ Sofa TBC
ML-201B2 Vinyl for Decorative cushion @ Sofa TBC
ML-202 Armchair @ Waiting area 4
ML-202A Vinyl for Armchair @ Waiting area TBC
ML-203 Stool @ Waiting area 8
ML-203A Vinyl for Stool @ Waiting area TBC
LIGHTING
ML-501 Floor lamp @ Waiting area 4
ML-502 Chandelier @ Waiting area 1
AREA RUG
ML-700 Area rug @ Waiting area 4

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-001
Description : Coffee table @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Basalto 12 coffee table by Simone Cagnazzo
Dimension : Dia.: 90cm; Height: 23cm
Manufacturer : Gallotti & Radice
Instructions :
1 Construction: Coffee table with "supermirror" bright stainless steel structure and mirrored glass top, with small
feet.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

Supplier Tong Khai Minh Co., Ltd


74/5 Truong Quoc Dung
HCMC, Vietnam
T 848 3997 1497 - 8
F 848 3844 9456

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-201
Description : Sofa @ Waiting area
Illustration / Photograph
Location :
level no total
quantity A320CS/3 2
quantity A320CD/3 2
total quantity 4

specification
Model : Arne "A320CD/3 & A320CS/3" sofa by Antonio Citterio
Dimension : Width: 320cm; Depth: 151cm; Height: 68cm; Seat height: 36cm
Manufacturer : B&B Italia
Instructions :
1 Construction: tubular steel and steel sections; Seat cushion upholstery shaped polyurethane, sterilized down,
polyester fibre wadding; Structure: bright brushed die-cast and extruded aluminium; Cover: fabric.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.
Supplier Tong Khai Minh Co., Ltd
74/5 Truong Quoc Dung, HCMC, Vietnam
T 848 3997 1497 - 8
F 848 3844 9456
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-201A
Description : Vinyl for Sofa @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Sotega
Color : Perle F5070911
Composition : 2% PU-Finish, 73% PVC-Compound, 25% CO-fabric
Size : Width: 150cm; thickness: 1.7 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-201B
Description : Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no code of fabric quantity
ML-201B1 8
ML-201B2 8
total quantity 16

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-201B1
Description : Fabric for Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Sendo
Color : Pearl
Composition : 79% Polyester, 21% Viscose
Width : 140cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-201B2
Description : Vinyl for Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Softline - Viola
Color : 104 x111
Composition :
Width :
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-202
Description : Armchair @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Wanders' Tulip armchair by Marcel Wanders
Dimension : Width: 86cm; Depth: 86cm; Height: 160cm; Seat height: 40cm
Manufacturer : Cappellini
Instructions :
1 Construction: The frame is produced in soft polyurethane co-injected with rigid polyurethane, the upholstery in
foam and acrylic layers; a shiny revolving base in dark varnished metal provides support.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

Supplier Tong Khai Minh Co., Ltd


74/5 Truong Quoc
Dung
HCMC, Vietnam
T 848 3997 1497 -
8
F 848 3844 9456
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-202A
Description : Vinyl for Armchair @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Softline - Viola
Color : 104x107
Composition :
Width :
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-203
Description : Stool @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity 8

specification
Model : Stool
Dimension : Dia.: 65cm; Height: 36cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-203A
Description : Vinyl for Stool @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Softline - Viola
Color : 104x107
Composition :
Width :
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-501
Description : Floor lamp @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Arco floor lamp marble base by Achille Castiglioni & Pier Giacomo Castiglioni
Dimension : Depth: 215cm; Height: 232cm; Base: W18x 24x 55cm
Manufacturer/Supplier : Flos/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Floor lamp providing direct light. White Carrara marble base. Satin-finish stainless steel
telescopic stem. Pressed, polished and zaponvarnished aluminum swiveling and heightadjustable reflector.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-502
Description : Chandelier @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Glass bubble chandelier
Dimension : Width: 1050cm; Depth: 320cm; Height: 570cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction:
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-502X
Description : Chandelier @ Waiting area
Illustration / Photograph

Zone 1 The length of hanging bulbs is from 540cm to 570cm


Zone 2 The length of hanging bulbs is from 510cm to 540cm
Zone 3 The length of hanging bulbs is from 480cm to 510cm
Zone 4 The length of hanging bulbs is from 450cm to 480cm

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-700
Description : Area rug @ Waiting area
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Handtufted rug
Dimension : Dia.:360cm
Manufactuer/Supplier : To be bid
Instructions : Refer to image for design & color intent.
1 NOTE : Maufacturer to submit artwork & strike off for approval prior to fabrication.
2 Pile Material : Woven from the finest of wools
3 Pitch :
4 Row :
5 Yarn Count :
6 Pile Weight :
7 Pile Height:
8 Backing :
9 Contractor to field verify quantities and installation conditions.
10 Supplier to quote based on the quantity and design currently being modified.
11 Carpet to be laid smooth over pad and shall be installed, stretched and balanced so that seams are parallel.
12 Installer to contact double stick pad manufacturer for proper adhesive information.
13 Seams to be heat taped as approved by manufacturer.
14 Manufacturer to provide seaming layout for designer approval.
15 Must meet all FHA requirements including flammability test ASTM E-684.
16 Provide heat and stain resistant finish.
17 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-800
Description : Bamboo rods installation @ Waiting area
Illustration / Photograph
Location :
level no unit total
quantity 27 nos
total quantity

Special surface finishes

specification
Material : Powder painted steel
Dimension : Dia.=10cm, H= 90cm
Manufactuer/Supplier : To be bid
Instructions : Refer to image for design & color intent.
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufucturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
6 they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Main Lobby (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : ML-800X
Description : Bamboo rods installation @ Waiting area
Illustration / Photograph

support structure

bamboo steel rod

support structure

support structure

Steel rod Dia.=10cm


Bamboo steel rods height = 900cm
Contractor to provide shodrawing for installation

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification

Project No. : VN-08-379


Project Name : Le Meridien HCMC
Area Name/No. : Latitude Bar (ground floor)
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e schedule


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date 29-Nov-11
Revision :
Code Description Qty
CASEGOODS
LB-001 Coffee table @ Lounge area 2
LB-001A1 Vinyl for Coffee table @ Lounge area TBC
LB-001A2 Vinyl for Coffee table @ Lounge area TBC
LB-002 Coffee table @ Dining area 7
LB-003 Dining table @ Dining area 1
LB-004 Coffee table @ Raised deck 4
LB-005 Side table @ Lounge area 2
UPHOLSTERY
LB-201 Sofa @ Dining area 2
LB-201A Leather for Sofa @ Dining area TBC
LB-201B Decorative cushion @ Sofa 8
LB-201B1 Fabric for Decorative cushion @ Sofa TBC
LB-201B2 Fabric for Decorative cushion @ Sofa TBC
LB-202 Lounge chair @ Dining area 20
LB-202A1 Leather for Lounge chair @ Dining area TBC
LB-202A2 Vinyl for Lounge chair @ Dining area TBC
LB-202B Decorative cushion @ Lounge chair with "LB-202A2" vinyl code 5
LB-202B1 Fabric for Decorative cushion @ Sofa TBC
LB-203 Armchair @ Lounge area 5
LB-203A1 Vinyl for Armchair (front side) @ Lounge area TBC
LB-203A2 Vinyl for Armchair (back side) @ Lounge area TBC
LB-204 Dining chair @ Dining area 4
LB-204A Vinyl for Dining chair @ Dining area TBC
LB-205 Banquette @ Lounge area 1
LB-206 Banquette @ Lounge area 1
LB-207 Banquette @ Raised deck 1
LB-205A,LB-206A,LB-207A Fabric for Banquette @ Lounge area TBC
LB-205B,LB-206B Decorative cushion @ Banquette 12
LB-205B1,LB-206B1 Fabric for Decorative cushion @ Banquette TBC
LB-205B2,LB-206B2 Fabric for Decorative cushion @ Banquette TBC
DRAPERY
LB-301 Motorised roller blind @ Dining area, Lounge area & Raised deck TBC
LB-301X Drawing of Motorised roller blind @ Dining area, Lounge area & Raised deck X
LB-301A Fabric for Motorised roller blind @ Dining area, Lounge area & Raised deck TBC

LIGHTING
LB-501 Chandelier @ Dining area 1
LB-502 Chandelier @ Dining area 1
LB-503 Chandelier @ Dining area 1
LB-504 Chandelier @ Dining area 1
LB-505 Chandelier @ Dining area 1
LB-506 Chandelier @ Dining area 1
LB-507 Chandelier @ Dining area 1
LB-508 Chandelier @ Dining area 1
LB-501-508X1 Drawing of Chandelier @ Dining area X
LB-501-508X2 Drawing of Chandelier @ Dining area X
LB-501-508X3 Drawing of Chandelier @ Dining area X

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-001
Description : Coffee table @ Lounge area
Illustration / Photograph
Location :
level no code of vinyl quantity
LB-001A1 1
LB-001A2 1
total quantity 2

specification
Model : Chat pouf by Nadadora
Dimension : Dia.: 116cm; Height: 36cm
Manufacturer/Supplier : Sancal/ Tong Khai Minh Co.Ltd
Instructions :
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-001A1
Description : Vinyl for Coffee table @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Sarano
Color : lachs 507-5023
Composition : 1% PU-Finish, 66% PVC-Compound, 33% CO fabric
Size : Width: 150cm; thickness: 1.35 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-001A2
Description : Vinyl for Coffee table @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Sarano
Color : Sand 507-5016
Composition : 1% PU-Finish, 66% PVC-Compound, 33% CO fabric
Size : Width: 150cm; thickness: 1.35 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-002
Description : Coffee table @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 7

specification
Model : Fat Fat table by Patricia Urquiola
Dimension : Dia.: 92cm; Height: 39cm
Manufacturer/Supplier : B&B Italia/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Support structure in tubular steel black matt lacquer, tray top in steel sheet matt black lacquer.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-003
Description : Dining table @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Archie "TA300" table by Paolo Piva
Dimension : Length: 300cm; Depth: 100cm; Height: 73cm
Manufacturer/Supplier : B&B Italia/ Tong Khai Minh Co.Ltd
Instructions :
1 Construction: Black satin varnished finish.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-004
Description : Coffee table @ Raised deck
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Lotus table by Jasper Morrison
Dimension : Dia.: 55cm; Height: 50cm
Manufacturer/Supplier : cappellini/ Tong Khai Minh Co.Ltd
Instructions :
1 Construction: Low tables with base in chromed steel and round top in brown Emperador marble.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-005
Description : Side table @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

specification
Model : Yo-Yo table by Jacob Wagner
Dimension : Width: 40cm; Depth: 43cm; Height: 45cm
Manufacturer/Supplier : Moroso/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Polycarbonate lacquered table with white high gloss varnished.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-201
Description : Sofa @ Dining area
Illustration / Photograph
Location :
level no total
quantity A320CS/3 1
quantity A320CD/3 1
total quantity 2

specification
Model : Arne "A320CD/3 & A320CS/3" sofa by Antonio Citterio
Dimension : Width: 320cm; Depth: 151cm; Height: 68cm; Seat height: 36cm
Manufacturer/Supplier : B&B Italia/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: tubular steel and steel sections; Seat cushion upholstery shaped polyurethane, sterilized down,
polyester fibre wadding; Structure: bright brushed die-cast and extruded aluminium; Cover: fabric.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-201A
Description : Leather for Sofa @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Flora
Color : 2126
Composition :
Size : Thickness: 1.2 / 1.4mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-201B
Description : Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no code of vinyl quantity
LB-201B1 4
LB-201B2 4
total quantity 8

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-201B1
Description : Fabric for Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : SA10
Color : 01M23
Composition : 53% Polyester, 47% Cotton
Width : 137cm
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-201B2
Description : Fabric for Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Sitar
Color : Flint
Composition : 100% Polyester
Width : 140cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-202
Description : Lounge chair @ Dining area
Illustration / Photograph
Location :
level no code of vinyl quantity
LB-202A1 15
LB-202A2 5
total quantity 20

specification
Model : Catifa 80 "Art. 2024" lounge chair with swivel base by Lievore Altherr Molina
Dimension : Width: 80.5cm; Depth: 70cm; Height: 68cm; Seat height: 38cm
Manufacturer/Supplier : Arper/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction:
Padded shell in polyurethane foam and steel plate frame.
Steel frame base to be powder coated painted match with upholstered color.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-202A1
Description : Leather for Lounge chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Flora
Color : 2126
Composition :
Size : Thickness: 1.2 / 1.4mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-202A2
Description : Vinyl for Lounge chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell Nova
Color : Polar
Composition : 78% Pvc 20% Polycotton 2% Polyurethane
width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-202B
Description : Decorative cushion @ Lounge chair with "LB-202A2" vinyl code
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-202B1
Description : Fabric for Decorative cushion @ Lounge chair
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : SA10
Color : 01M01
Composition : 53% Polyester, 47% Cotton
Width : 137cm
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-203
Description : Armchair @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : 181 Cloth armchair
Dimension : Width: 86cm; Depth: 79cm; Height: 72cm; Seat height: 40cm
Manufacturer/Supplier : Cassina Poltrona Frau Group/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: The internal supporting frame is made from glass-reinforced plastic and processed with original
slits and ribbing that guarantee the comfort of the seat. The padding is made from polyurethane foam and
polyester wadding. The fabric or leather upholstery with two-tone colours, combined with polyester wadding,
is removable thanks to two lateral zips that give it an original finish.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-203A1
Description : Vinyl for Armchair (front side) @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Sarano
Color : lachs 507-5023
Composition : 1% PU-Finish, 66% PVC-Compound, 33% CO fabric
Size : Width: 150cm; thickness: 1.35 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-203A2
Description : Vinyl for Armchair (back side) @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Flora
Color : 2076
Composition :
Size : Thickness: 1.2 / 1.4mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-204
Description : Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Venere chair by Bartoli Design
Dimension : Width: 44cm; Depth: 54cm; Height: 89cm; Seat height: 47cm
Manufacturer/Supplier : Bonaldo/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Venere is a mono-frame chair with a steel structure, padded in cold cure polyurethane foam
and completely covered in fabric or leather.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-204A
Description : Vinyl for Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell Nova
Color : Polar
Composition : 78% Pvc 20% Polycotton 2% Polyurethane
width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-205
Description : Banquette @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-206
Description : Banquette @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-207
Description : Banquette @ Raised deck
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-205A, LB-206A, LB-207A
Description : Fabric for Banquette @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 7
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-205B, LB-206B
Description : Decorative cushion @ Banquette
Illustration / Photograph
Location :
level no code of fabric quantity
LB-205B1, 206B1 6
LB-205B2, 206B2 6
total quantity 12

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-205B1, LB-206B1
Description : Fabric for Banquette @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : SA10
Color : 01M23
Composition : 53% Polyester, 47% Cotton
Width : 137cm
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-205B2, LB-206B2
Description : Fabric for Banquette @ Lounge area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : SA10
Color : 01M18
Composition : 53% Polyester, 47% Cotton
Width : 137cm
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-301
Description : Motorised roller blind @ Dining area, Lounge area & Raised deck
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Motorised roller blind system for blackout blind
Product : Silent Gliss - System 4880 (Motorized system suitable for blind width from 340cm to 500cm)
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: manta@melchers.com.vn
Instructions : 1. For blind less than 4m width: to use tube 4901 dia. 80mm.
2. For blind from 4m width and above: to use tube 4957 dia.110mm.
3. Ceiling fix.
4. Support at ceiling needs to be adequate to the weight of this heavy duty system.
5. Fixing recess needs to be sufficient.
6. System needs to be calibrated individually with fabric at factory before installation.
7. Roller blind fabric to be cut by ultrasonic cutter as appropriate.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-301X
Description : Drawing of Motorised roller blind @ Dining area, Lounge area
& Raised deck
Illustration / Photograph

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-301A
Description : Fabric for Motorised roller blind @ Dining area, Lounge area
& Raised deck
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Novoscreen - Spectra Metallic
Color : 1280
Composition :
Width :
Manufacturer/Supplier : Pavo/ Con Cong Co.,Ltd
96, D5 Str., Ward 25, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 62948404; Fax: +84 (08) 62948407
Contact: Ms Lan Anh, mobile: 0933 650275
Email: lananhnguyen@pavovietnam.com
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-501
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Bell Jar' Model: 'Pod' Model: 'Stargazer'


Color: 'Smoke' Color: 'Plum' Color: 'Amber'

specification
Model : Circular-3 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-502
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Oculo' Model: 'Pharos' Model: 'Stargazer'


Color: 'Amber' Color: 'Effervescent ' Color: 'Smoke'
specification
Model : Circular-3 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-503
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Bell Jar' Model: 'Pod' Model: 'Aurora' Model: 'Stamen'


Color: 'Sapphire' Color: 'chocolate' Color: 'Crystal' Color: 'Amber'

specification
Model : Circular-4 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-504
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Minaret' Model: 'Pod' Model: 'Stamen' Model: 'Bell Jar'


Color: 'Effervescent ' Color: 'Sapphire' Color: 'Gray' Color: 'Smoke'
specification
Model : Circular-4 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-505
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: ''Bell Jar' Model: 'Pod' Model: 'Stargazer' Model: 'Pharos'


Color: 'Amber' Color: 'Smoke' Color: 'Crystal' Color: 'Sapphire'

specification
Model : Circular-4 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-506
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Pod' Model: 'Oculo' Model: 'Bell Jar' Model: 'Pharos'


Color: 'Amber' Color: 'Crystal' Color: 'Smoke' Color: 'Crystal'

specification
Model : Circular-4 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-507
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Stargazer' Model: 'Pharos' Model: 'Pod' Model: ''Bell Jar' Model: 'Minaret'
Color: 'Sapphire' Color: 'Effervescent ' Color: 'Smoke' Color: 'Crystal' Color: 'Plum'
specification
Model : Circular-5 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-508
Description : Chandelier @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

CANOPY IN ARCHITECTURAL BRONZE

Model: 'Stamen' Model: 'Pod' Model: 'Aurora' Model: ''Bell Jar' Model: 'Pharos'
Color: 'Gray' Color: 'Smoke' Color: 'Chocolate' Color: 'Amber' Color: 'Crystal'

specification
Model : Circular-5 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-501-508X1
Description : Drawing of Chandelier @ Dining area
Illustration / Photograph

Model: 'Bell Jar'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 24.5cm; Height: 30.5cm

Model: 'Pod'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts, dimmable
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 17.8cm; Height: 30.5cm

Model: 'Stargazer'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 40 watts
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 27.9cm; Height: 17.8cm

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-501-508X2
Description : Drawing of Chandelier @ Dining area
Illustration / Photograph

Model: 'Oculo'

Materials:
Fixture is supplied with:
• incandescent 120v bulb, 30 watts @ 120v, 60 watts @
240v
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 25.4cm; Height: 20.3cm

Model: 'Pharos'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts, dimmable
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 12.7cm; Height: 30.5cm

Model: 'Aurora'

Materials:
Fixture is supplied with:
• Miniature tubular 120v filament bulb, 40 watts, dimmable

• 4’ black cord set (can be cut on site) longer cord sets


available by special order
• Black ceiling canopy

Dimension: Dia.: 27.9cm; Height: 12cm

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LB-501-508X3
Description : Drawing of Chandelier @ Dining area
Illustration / Photograph

Model: 'Stamen'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts, dimmable
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 30.5cm; Height: 30.5cm

Model: 'Minaret'

Materials:
Fixture is supplied with:
• Incandescent 120v bulb, 30 watts @ 120v, 60 watts @
240v
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 27.9cm; Height: 21.6cm

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification

Project No. : VN 08-379


Project Name : Le Meridien HCMC
Area Name/No. : Latest Recipe Restaurant (level mezzanine)
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e schedule


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date 29-Nov-11
Revision :

Code Description Qty


CASEGOODS
LR-001 Dining table @ Restaurant area 25
LR-002 Dining table @ Restaurant area 8
LR-003 Dining table @ Restaurant area 3
LR-004 Waiter station @ Restaurant area 2
UPHOLSTERY
LR-201 Dining chair @ Restaurant area 76
LR-201A Vinyl for Dining chair @ Restaurant area TBC
LR-202 Dining chair @ Restaurant area 18
LR-202A Vinyl for Dining chair @ Restaurant area TBC
LR-203 Banquette @ Restaurant area 1
LR-204 Banquette @ Restaurant area 1
LR-203A,LR-204A Vinyl for Banquette @ Restaurant area TBC
LR-203B,LR-204B Decorative cushion @ Banquette 12
LR-203B1,LR-204B1 Fabric for Decorative cushion TBC
LR-203B2,LR-204B2 Fabric for Decorative cushion TBC

DRAPERY
LR-302.1 Motorised drapery @ Restaurant area TBC
LR-302.1X Drawing of Motorised drapery @ Restaurant area X
LR-302.1A Fabric for Motorised sheer curtain @ Restaurant area TBC
LR-302.2 Motorised sheer curtain @ Restaurant area TBC
LR-302.2A Fabric for Motorised sheer curtain @ Restaurant area TBC

LIGHTING
LR-501 Pendant lamp @ Dining area 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-001
Description : Dining table @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 25

"Pearl Nickel" color finish for table leg

specification
Model : Dining table
Dimension : Width: 90cm; Depth: 90cm; Height: 74cm
Manufacturer/Supplier : to be bid
Instructions :
1 Construction: Table with dark brown timber veneer top and leg in lacquered finish.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-002
Description : Dining table @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 8

specification
Model : Dining table
Dimension : Width: 90cm; Depth: 90cm; Height: 74cm
Manufacturer/Supplier : to be bid
Instructions :
1 Construction: Volakas white marble top & dark brown solid timber legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-003
Description : Dining table @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 3

specification
Model : Duna D086 table by Lievore Altherr Molina
Dimension : Dia.: 160cm; Height: 74cm/ Base: dia. 59cm
Manufacturer/Supplier : Arper/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Table with round base in satin-finish steel, column in white lacquered steel and top in Volakas
white marble.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-004
Description : Waiter station @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

"Pearl Nickel" color finish

specification
Model : Waiter station
Dimension : Width: 130cm; Depth: 60cm; Height: 85cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Waiter station in "Pearl Nickel" color lacquered finish.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-201
Description : Dining chair @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 76

specification
Model : 029 Lin chair by Leif.designpark
Dimension : Width: 54.6cm; Depth: 54.6cm; Height: 67.4cm; Seat height: 42cm
Manufacturer/Supplier : De La Espada/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Slender contours of upholstery fluidly move from one feature to the next. The backrest gently
slopes downward to the seat where arms curve upward to a comfortable height. A solid wood leg frame
raises the upholstered form, enhancing the inherent visual levity.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-201A
Description : Vinyl for Dining chair @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Soplissa FLS
Color : White F5071809
Composition : 7% PU-Finish, 68% PVC-Compound, 25% CO fabric
Size : Width: 150cm; thickness: 1.7 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-202
Description : Dining chair @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 18

specification
Model : 3261-10/ C Collection side conference chair with arms by Yves Béhar
Dimension : Width: 68.6cm; Depth: 60cm; Height: 82.6cm
Manufacturer/Supplier : HBF Hickory Business Furniture/ to be bid
Instructions :
1 Construction: Solid wood leg frame.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latitude Bar (ground floor)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-202A
Description : Vinyl for Dining chair @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell
Color : Ostrich Bone
Composition :
Width :
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-203
Description : Banquette @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

76 cm
765 cm

specification
Model : 3-seat sofa CHESTERFIELD
Dimension : Width: 765cm; Depth: 91cm; Height: 76cm
Manufacturer/Supplier : Maisons Du Monde/ to be bid
Instructions :
1 Construction: Solid wood legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-204
Description : Banquette @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

76 cm
695.7 cm

specification
Model : 3-seat sofa CHESTERFIELD
Dimension : Width: 695.7cm; Depth: 91cm; Height: 76cm
Manufacturer/Supplier : Maisons Du Monde/ to be bid
Instructions :
1 Construction: Solid wood legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-203A, LR-204A
Description : Vinyl for Banquette @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Palena
Color : Perle F6461588
Composition : 90% PVC-compound, 10% CO/PES-knitted fabric
Size : Width: 137cm; thickness: 1.25 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-203B, LR-204B
Description : Decorative cushion @ Banquette
Illustration / Photograph
Location :
level no code of fabric quantity
LR-203B1,LR-204B1 6
LR-203B2,LR-204B2 6
total quantity 12

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-203B1, LR-204B1
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Kioto
Color : C/ 20
Composition : 100% Polyester
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-203B2, LR-204B2
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 1
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-302.1
Description : Motorised drapery @ Restaurant area
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Motorised wave curtain track for sheer curtain
Product : Silent Gliss - System 5200W motorised
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: manta@melchers.com.vn
Instructions : 1. Track to be fixed either inside (ceiling fitting) or outside pelmet (recess fitting).
2. Control by wall - switch.
3. Fabric to be made-up in wave style, fullness 200%.
4. Curtain to be opened in the middle for pair stack.
5. Bottom hem to be weighted to maintain the vertical wave.
6. All hems to be sewn by blind-stitches.
7. Gliders and hooks are in nylon material, no iron-containing accessory to be used.
8. Curtain length to be 0-0.5cm from carpet.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-302.1X
Description : Drawing of Motorised drapery @ Restaurant area
Illustration / Photograph

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-302.1A
Description : Fabric for Motorised drapery @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Dessin J-50050 A
Color : Col.0101
Composition : 100% Pes
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-302.2
Description : Motorised sheer curtain @ Restaurant area
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Wave curtain
Product : Silent Gliss 3000 system
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: manta@melchers.com.vn
1 Construction: Straight hung, split at center. Baton drawn. Drapery to have S-fold at the top and bottom.
2 Fullness:
3 Finished length: refer to plan for dimensions and ceiling height
4 Manufacturer/Fabricator to verify fabric meterage requiement.
5 Lining to be sewn to overdrapery.
6 Manufacturer to supply lining.
7 Price to include fabrication, installation, and heavy duty hardware.
8 Hem of drapery to be weighted.
9 All materials to be guaranteed rust and corrosion proof.
10 Manufacturer to supply all necessary hardware and instructions for installation.
11 Refer to Drapery Specifications (Preamble) for additional instructions.
12 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-302.2A
Description : Fabric for Motorised sheer curtain @ Restaurant area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : The sheer Collection
Color : Tierra 1089S35/ Beige
Composition : 100% Polyester
Width : 300cm
Manufacturer/Supplier : Pavo/ Con Cong Co.,Ltd
96, D5 Str., Ward 25, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 62948404; Fax: +84 (08) 62948407
Contact: Ms Lan Anh, mobile: 0933 650275
Email: lananhnguyen@pavovietnam.com
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Latest Recipe Restaurant (level mezzanine)
Issue Date : 29-Nov-11
Revision Date :
Code : LR-501
Description : Pendant lamp @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Pendant lamp
Dimension : Width: 570cm; Depth: 80cm; Height: 50cm
Colour :
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Pendant lamp with polished chrome lamp shade.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification

Project No. : VN-08-379


Project Name : Le Meridien HCMC
Area Name/No. : Pre function, Meeting rooms & Business center (1st floor)
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e schedule


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function, Meeting rooms & Business center (1st floor)
Issue Date 29-Nov-11
Revision :

Code Description Qty


CASEGOODS
PF-001,BC-001 Coffee table @ Pre function, Business center 4
PF-002 Coffee table @ Pre function 4
PF-003 Console table @ Pre function 2
PF-004 Console table @ Pre function 2
PF-005 Console table @ Pre function 2
MR-001 Meeting table @ Meeting rooms 20
MR-002 Meeting table @ Meeting rooms 2
MR-003,MR-004 Meeting table @ Meeting rooms 24
MR-005 Meeting table @ Meeting rooms 4
BC-002 Meeting table @ Business center 1

UPHOLSTERY
PF-201,BC-201 Armchair @ Pre function, Business center 7
PF-201A Vinyl for Armchair @ Pre function TBC
BC-201A Fabric for Armchair @ Business center TBC
PF-202 Sofa @ Pre function 4
PF-202A Vinyl for Sofa @ Pre function TBC
PF-202B Decorative cushion @ Sofa 16
PF-202B1 Fabric for Decorative cushion @ Sofa TBC
PF-202B2 Vinyl for Decorative cushion @ Sofa TBC
MR-201 Chair @ Meeting room 132
MR-201A1 Fabric for Chair @ Meeting room TBC
MR-201A2 Fabric for Chair @ Meeting room TBC
MR-201A3 Fabric for Chair @ Meeting room TBC
BC-202 Meeting armchair @ Business center 6
BC-202A Vinyl for Meeting armchair @ Business center TBC
BC-203 Stool @ Business center 6
BC-203A1 Fabric for Meeting armchair @ Business center TBC
BC-203A2 Fabric for Meeting armchair @ Business center TBC
BC-204 Armchair @ Business center 1
BC-204A Fabric for Armchair @ Business center TBC

DRAPERY
PF-301,MR-301,BC-301 Motorised roller blind @ Pre function, Meeting rooms & Business center TBC
PF-301X,MR-301X,BC-301X Drawing of Motorised roller blind @ Pre function, Meeting rooms & Business center X
PF-301A Fabric for Motorised roller blind @ Pre function TBC
MR-301A,BC-301A Fabric for Motorised roller blind @ Meeting rooms & Business center TBC

LIGHTING
BC-501 Pendant lamp 1
BC-502 Pendant lamp 1
PF-501 Floor lamp @ Pre function 5
PF-503 Chandelier @ Pre function 1 set
BR-501 Pendant lamp @ Ballroom 24
PR-501 Pendant lamp @ Public restroom 8

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function, Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-001, BC-001
Description : Coffee table @ Pre function, Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

Top colour finish

specification
Model : Caulfield Coffee table by Rodolfo Dordoni
Dimension : Dia.: 70cm; Height: 46cm
Manufacturer/Supplier : Minotti/ Tong Khai Minh Co., Ltd
Instructions :
1 Construction:
Frame: in metal made up of rods Ø 10 mm and Ø 6 mm; bright chrome-plated finish and protective PVC
glides.
Top: in glossy varnished wood in pearl nickel colour, tempered glass top 10 mm in thickness.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-002
Description : Coffee table @ Pre function
Illustration / Photograph
Top color finish Location :
level no total
quantity
total quantity 4

specification
Model : Caulfield Coffee table by Rodolfo Dordoni
Dimension : Dia.: 100cm; Height: 33cm
Manufacturer/Supplier : Minotti/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction:
Frame: in metal made up of rods Ø 10 mm and Ø 6 mm; bright chrome-plated finish and protective PVC
glides.
Top: in glossy varnished wood in pearl nickel colour, tempered glass top 10 mm in thickness.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-003
Description : Console table @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

Color finish

90 cm

specification
Model : Missy table by Gino Carollo
Dimension : Width: 110cm; Depth: 70cm; Height: 90cm
Manufacturer/Supplier : Bonaldo/ to be bid
Instructions :
1 Construction: Frame in painted steel. Top in painted wood.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-004
Description : Console table @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

Color finish

90 cm

specification
Model : Missy table by Gino Carollo
Dimension : Width: 150cm; Depth: 70cm; Height: 90cm
Manufacturer/Supplier : Bonaldo/ To be bid
Instructions :
1 Construction: Frame in painted steel. Top in painted wood.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-005
Description : Console table @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

Color finish

75 cm

specification
Model : Missy table by Gino Carollo
Dimension : Width: 130cm; Depth: 60cm; Height: 75cm
Manufacturer/Supplier : Bonaldo/ To be bid
Instructions :
1 Construction: Frame in painted steel. Top in painted wood.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-001
Description : Meeting table @ Meeting rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity 20

PLAN:

specification
Model : Meeting table
Dimension : Width: 160cm; Depth: 80cm; Height: 75cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Dark brown timber veneer table top and gloss stainless steel legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-002
Description : Meeting table @ Meeting rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

PLAN:

specification
Model : Meeting table
Dimension : Width: 160cm; Depth: 85cm; Height: 75cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Dark brown timber veneer table top and gloss stainless steel legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-003, MR-004
Description : Meeting table @ Meeting rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity 24

PLAN:

specification
Model : Meeting table
Dimension : Width: 160cm; Depth: 90cm; Height: 75cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Dark brown timber veneer table top and gloss stainless steel legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-005
Description : Meeting table @ Meeting rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

PLAN:

specification
Model : Meeting table
Dimension : Width: 242.5cm; Depth: 80cm; Height: 75cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Dark brown timber veneer table top and gloss stainless steel legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-002
Description : Meeting table @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : S round table by Xavier Lust
Dimension : Dia.: 120cm; Height: 73cm
Manufacturer/Supplier : MDF Italia/ to be bid
Instructions :
1 Construction: S-shaped twisted stand, moulded in Cristalplant® (a composite material made up of natural
minerals and polyester and acrylic polymers) in matt white. Tops for a white stand in a 30 mm medium-
density wood fibreboard, lacquered in matt white with scratch-resistant finish.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function, Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-201, BC-201
Description : Armchair @ Pre function, Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity 7

specification
Model : Metropolitan ME84 armchair by Jeffrey Bernett
Dimension : Width: 84cm; Depth: 83cm; Height: 73cm; Seat height: 38cm
Manufacturer/Supplier : B&B Italia/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction:
Internal frame: tubulars and steel profiles.
Internal frame upholstery: Bayfit® (Bayer®) cold shaped polyurethane foam, polyester fibre cover.
Seat cushions upholstery: shaped polyurethane of different densities, polyester fibre wadding.
Support structure: bright brushed die-cast and extruded aluminium.
Ferrules: plastic material.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-201A
Description : Vinyl for Armchair @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Sarano
Color : Lachs 507-5023
Composition : 1% PU-Finish, 66% PVC-Compound, 33% CO fabric
Size : Width: 150cm; thickness: 1.35 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-201A
Description : Fabric for Armchair @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Matteo
Color : Tangelo
Composition : 100% Polyester
Width : 138cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-202
Description : Sofa @ Pre function
Illustration / Photograph
Location :
level no total
quantity A320CS/3 2
quantity A320CD/3 2
total quantity 4

specification
Model : Arne "A320CD/3 & A320CS/3" sofa by Antonio Citterio
Dimension : Width: 320cm; Depth: 151cm; Height: 68cm; Seat height: 36cm
Manufacturer/Supplier : B&B Italia/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: tubular steel and steel sections; Seat cushion upholstery shaped polyurethane, sterilized down,
polyester fibre wadding; Structure: bright brushed die-cast and extruded aluminium; Cover: fabric.

2 Manufacturer to submit finish sample for Designer approval.


3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-202A
Description : Vinyl for Sofa @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Sotega
Color : Perle F5070911
Composition : 2% PU-Finish, 73% PVC-Compound, 25% CO-fabric
Size : Width: 150cm; thickness: 1.7 +/- 0.2mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-202B
Description : Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no code of fabric quantity
PF-202B1 8
PF-202B2 8
total quantity 16

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-202B1
Description : Fabric for Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Sendo
Color : Pearl
Composition : 79% Polyester, 21% Viscose
Width : 140cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-202B2
Description : Vinyl for Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Softline - Viola
Color : 104 x111
Composition :
Width :
Manufacturer/Supplier : Sankon Interior limited
1/F, Lockhart Center, 301 Lockhart road, Wanchai, Hong Kong
Tel: (852) 2543 3880; Fax: (852) 2543 3755
Contact: Mr Brian Cheung
Email: brian@sankon.com.hk
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-201
Description : Chair @ Meeting room
Illustration / Photograph
Location :
level no code of fabric quantity
MR-201A1 44
MR-201A2 44
MR-201A3 44
total quantity 132

specification
Model : Oxford 3292 chair by Arne Jacobsen
Dimension : Width: 60cm; Depth: 60cm; Height: 125-139cm; Seat height: 41-55cm
Manufacturer/Supplier : Fritz Hansen/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: With unupholstered alu-arms,height adjustable, tilt, castors.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-201A1
Description : Fabric for Chair @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Verona
Color : Plum
Composition : 54% Acrylic, 34% Polyester, 12% Cotton
Width : 139cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-201A2
Description : Fabric for Chair @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Kioto
Color : C/ 13
Composition : 100% Polyester
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-201A3
Description : Fabric for Chair @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Classic Jacquards - Husk
Color : Mist
Composition : 37% Viscose, 21% Cotton, 24% Polyester, 18% Linen
Width : 144cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-202
Description : Meeting armchair @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity 6

specification
Model : Flow armchair by Jean Marie Massaud
Dimension : Width: 60cm; Depth: 56cm; Height: 78cm; Seat height: 44cm
Manufacturer/Supplier : MDF Italia/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: This small armchair, with an iron frame cold-foamed with self-skinning polyurethane, is
completely upholstered with a quilted cover, either in leather or fabric, and polyester wadding. The wide range
of base with a central leg and finish matt lacquered steel or aluminium in white.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-202A
Description : Vinyl for Meeting armchair @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Skai fashion - Special Line
Color : Neptun Caleri offwhite F6494002
Composition : 2% nano high-tech compound, 88% PVC-Compound, 10% knitted polyester
Size : Width: 140cm; thickness: 1.0 - 1.7mm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-203
Description : Stool @ Business center
Illustration / Photograph
Location :
level no total
quantity
BC-203A2 total quantity 6

BC-203A1

specification
Model : Tonic stool by Lorenz*Kaz
Dimension : Width: 48cm; Depth: 43cm; Height: 82cm; Seat height: 78cm
Manufacturer/Supplier : Rossin/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Metal frame with belts and padding in cold-moulded fire retardant polyurethane foam; fixed
cover. Base: sled pedestal tube Ø 16 mm in chrome plated steel.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-203A1
Description : Fabric for Stool @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Matteo
Color : Tangelo
Composition : 100% Polyester
Width : 138cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-203A2
Description : Fabric for Stool @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Oberon
Color : Nickle
Composition : 34% Polyester, 20% Cotton, 19% Viscose, 13% Acrylic, 6% Linen
Width : 140cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-204
Description : Armchair @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Bond armchair by Jean-Marie Massaud
Dimension : Width: 57cm; Depth: 62cm; Height: 78.5cm; Seat height: 45cm
Manufacturer/Supplier : Offecct/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Frame in laminated wood with cold foam. Upholstered in fabric or leather. Armrests and frame
whith 4 or 5 castors in chrome.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BC-204A
Description : Fabric for Armchair @ Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Oberon
Color : Nickle
Composition : 34% Polyester, 20% Cotton, 19% Viscose, 13% Acrylic, 6% Linen
Width : 140cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function, Meeting rooms & Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-301, MR-301, BC-301
Description : Motorised roller blind @ Pre function, Meeting rooms & Business
center
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Motorised roller blind system for blackout blind
Product : Silent Gliss - System 4880 (Motorized system suitable for blind width from 340cm to 500cm)
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: manta@melchers.com.vn
Instructions : 1. For blind less than 4m width: to use tube 4901 dia. 80mm.
2. For blind from 4m width and above: to use tube 4957 dia.110mm.
3. Ceiling fix.
4. Support at ceiling needs to be adequate to the weight of this heavy duty system.
5. Fixing recess needs to be sufficient.
6. System needs to be calibrated individually with fabric at factory before installation.
7. Roller blind fabric to be cut by ultrasonic cutter as appropriate.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function, Meeting rooms & Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-301X, MR-301X, BC-301X
Description : Drawing of Motorised roller blind @ Pre function, Meeting rooms &
Business center
Illustration / Photograph

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-301A
Description : Fabric for Motorised roller blind @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Comet non-blackout
Color : Snow
Composition : 50% polyester, 50% Polyester Cationic
Width : 250cm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Meeting rooms & Business center (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : MR-301A, BC-301A
Description : Fabric for Motorised roller blind @ Meeting rooms & Business center
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Comet blackout
Color : Snow
Composition : 50% polyester, 50% Polyester Cationic
Width : 250cm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center
Issue Date : 29-Nov-11
Revision Date :
Code : BC-501
Description : Pendant lamp
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Pendant lamp
Dimension : Dia.:150cm; Height: 110cm
Colour :
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Timber veneer mapel wood with transparent fabric below.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Business center
Issue Date : 29-Nov-11
Revision Date :
Code : BC-501
Description : Pendant lamp
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Pendant lamp
Dimension : Width: 285cm; Depth: 35cm; Height: 110cm
Colour :
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Pendant lamp with transparent glass diffuser.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-501
Description : Floor lamp @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : Twiggy floor lamp by Marc Sadler
Dimension : Height: 215cm/ Diffuser: Dia.: 46cm; height: 29cm
Colour : White
Manufacturer/Supplier : Foscarini/ Tong Khai Minh Co. Ltd
Instructions :
1 Construction: Compound material floor lamp on lacquered glass fibre base, available in "Bianco" chromatic
finish.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-503
Description : Chandelier @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity 1 set

Model: 'Stargazer' Model: 'Pharos' Model: 'Bell Jar' Model: 'Pod' Model: 'Minaret'
Color: 'Amber' Color: Color: 'Smoke' Color: 'Smoke' Color: 'Plum'

Model: 'Pharos' Model: 'Bell Jar' Model: 'Bell Jar' Model: 'Pod' Model: 'Stamen'
Color: 'Sapphire' Color: 'Amber' Color: 'Sapphire' Color: 'Plum' Color: 'Gray'
specification
Model : Chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-503
Description : Chandelier @ Pre function
Illustration / Photograph
Location :
level no total
quantity
total quantity 1 set

CANOPY IN ARCHITECTURAL BRONZE

specification
Model : Circular-5 canopy chandelier by Jeremy Pyles
Dimension :
Niche Modern/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-503
Description : Drawing of lampshade
Illustration / Photograph

Model: 'Bell Jar'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 24.5cm; Height: 30.5cm

Model: 'Pod'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts, dimmable
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 17.8cm; Height: 30.5cm

Model: 'Stargazer'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 40 watts
• 4’ black cord set (can be cut on site) longer cord sets
available by special order
• Black ceiling canopy

Dimension: Dia.: 27.9cm; Height: 17.8cm

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Pre function (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PF-503
Description : Drawing of lampshade
Illustration / Photograph

Model: 'Pharos'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts, dimmable

• 4’ black cord set (can be cut on site) longer cord sets


available by special order
• Black ceiling canopy

Dimension: Dia.: 12.7cm; Height: 30.5cm

Model: 'Stamen'

Materials:
Fixture is supplied with:
• Tubular incandescent 120v bulb, 75 watts, dimmable

• 4’ black cord set (can be cut on site) longer cord sets


•available by special
Black ceiling canopyorder

Dimension: Dia.: 30.5cm; Height: 30.5cm

Model: 'Minaret'

Materials:

Fixture is supplied with:


• Incandescent 120v bulb, 30 watts @ 120v, 60 watts @
240v
• 4’ black cord set (can be cut on site) longer cord sets
available by special
• Black ceiling canopyorder

Dimension: Dia.: 27.9cm; Height: 21.6cm

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Ballroom (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : BR-501
Description : Pendant lamp @ Ballroom
Illustration / Photograph
Location :
level no total
quantity
total quantity 24

specification
Model : Pendant lamp
Dimension : Width: 380cm; Depth: 105cm
Colour :
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: pendant lamp with blown glass diffuser. Refer Ballroom RCPdrawing for further information
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Public area (1st floor)
Issue Date : 29-Nov-11
Revision Date :
Code : PR-501
Description : Pendant lamp @ Public restroom
Illustration / Photograph
Location :
level no total
quantity
total quantity 8

specification
Model : Copper Shade pendant lamp by Tom Dixon
Dimension : Dia.: 45cm; Height: 41cm/ Cable length: 250cm
Colour : Copper
Manufacturer/Supplier : Tom Dixon
Instructions :
1 Construction: Material: Polycarbonate, copper. The Copper Shade is created by exploding a thin layer of pure
metal onto the internal surface of a polycarbonate globe.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification

Project No. : Vn-08-379


Project Name : Le Meridien HCMC
Area Name/No. : Bamboo Chic Restaurant (level 9)
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e schedule


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date 29-Nov-11
Revision :

Code Description Qty


CASEGOODS
BB-001 Dining table @ Dining area 16
BB-002 Dining table @ Bar lounge 4
BB-003 Dining table @ Private room 2 1
BB-004 Dining table @ Private room 1 1
BB-005 Console cabinet @ Private rooms 2
UPHOLSTERY
BB-201 Armchair @ Dining area 24
BB-201A Fabric for Seat cushion of Armchair @ Dining area TBC
BB-201B Decorative cushion @ Armchair 24
BB-201B1 Fabric for Decorative cushion TBC
BB-201B2 Fabric for Decorative cushion TBC
BB-202 Armchair @ Bar lounge 7
BB-202A Fabric for Armchair @ Bar lounge TBC
BB-203 Armchair @ Private booth 16
BB-203A Fabric for Armchair @ Private booth TBC
BB-204 Banquette @ Private booth 8
BB-204A1 Fabric for Banquette @ Private booth TBC
BB-204A2 Fabric for Banquette @ Private booth TBC
BB-204B Decorative cushion @ Banquette 32
BB-204B1 Fabric for Decorative cushion TBC
BB-204B2 Fabric for Decorative cushion TBC
BB-204B3 Fabric for Decorative cushion TBC
BB-205 Bar chair @ Bar lounge 10
BB-205A Fabric for Bar chair @ Bar lounge TBC
BB-206 Dining armchair @ Private rooms 18
BB-206A Fabric for Seat cushion of Dining armchair @ Private rooms TBC
BB-207 Banquette @ Bar lounge 1
BB-207A Fabric for Banquette @ Bar lounge TBC
BB-207B Decorative cushion @ Banquette 8
BB-207B1 Fabric for Decorative cushion TBC
BB-207B2 Fabric for Decorative cushion TBC

DRAPERY
BB-301 Motorised roller blind @ Dining area & Bar lounge TBC
BB-301X Drawing of Motorised roller blind @ Dining area & Bar lounge X
BB-301A Fabric for Motorised roller blind @ Dining area & Bar lounge TBC

LIGHTING
BB-501 Pendant lamp @ Dining area 8
BB-502 Pendant lamp @ Private booth 4
BB-503 Pendant lamp @ Bar lounge 1
BB-504 Pendant lamp @ Bar lounge 1

ARTWORK
BB-801 Artwork @ Private rooms 2

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-001
Description : Dining table @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 16

specification
Model : Dining table
Dimension : Dia.: 80cm; Height: 74cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Laminated broken glass table top & gloss stainless steel leg.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-002
Description : Dining table @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Dining table
Dimension : Dia.: 60cm; Height: 74cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Laminated broken glass table top & gloss stainless steel leg.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-003
Description : Dining table @ Private room 2
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Grace 834/TO oval table by Mauro Lipparini
Dimension : Length: 270cm; Depth: 110cm; Height: 74cm
Manufacturer/Supplier : Potocco
Instructions :
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-004
Description : Dining table @ Private room 1
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Grace 834/TO oval table by Mauro Lipparini
Dimension : Length: 360cm; Depth: 110cm; Height: 74cm
Manufacturer/Supplier : Potocco
Instructions :
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-005
Description : Console cabinet @ Private rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity 2

specification
Model : Grace 834/MC3 cabinet by Mauro Lipparini
Dimension : Width: 170cm; Depth: 45cm; Height: 74cm
Manufacturer/Supplier : Potocco
Instructions :
1 Construction: Low server with three doors and distinctive arched sides, Silver painted finish
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-201
Description : Armchair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 24

specification
Model : Tibidabo armchair by Fabio Calvi, Paolo Brambilla
Dimension : Width: 96cm; Depth: 88cm; Height: 96cm
Manufacturer/Supplier : Varaschin
Instructions :
1 Construction: Upholsteried armchair with varnished aluminium in black.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-201A
Description : Fabric for Seat cushion of Armchair @ Dining area @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Oberon
Color : Nickle
Composition : 34% Polyester, 20% Cotton, 19% Viscose, 13% Acrylic, 6% Linen
Width : 140cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-201B
Description : Decorative cushion @ Armchair
Illustration / Photograph
Location :
level no code of fabric quantity
BB-201B1 12
BB-201B2 12
total quantity 24

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-201B1
Description : Fabric for Decorative cushion @ Armchair
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Monalisa
Color : Rose
Composition :
Width :
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

dwp australia malaysia


3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-201B2
Description : Fabric for Decorative cushion @ Armchair
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Palm Beach
Color : Wave
Composition : 100% Silk
Width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-202
Description : Armchair @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 7

specification
Model : Brando swivel armchair by Mónica Sánchez
Dimension : Width: 77cm; Depth: 77cm; Height: 81cm; Seat height: 45cm
Manufacturer/Supplier : Rafemar
Instructions :
1 Construction: Swivel chair with fibre frame, covered by injected foam and pre-upholstered with protector
fabric. Polished stainless steel leg.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-202A
Description : Fabric for Armchair @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Acacia - Sparkle Collection
Color : 31-Passion
Composition : 62% Polyester, 38% Viscose
Width : 138cm
Manufacturer/Supplier : DECO Interior Fabric
179 Nguyen Trong Tuyen St., Ward 8, Phu Nhuan District, HCMC, Vietnam
Tel: +84 (08) 22005969; Fax: +84 (08) 54111678
Email: decovietnam@gmail.com
Contact: Mr Ken Chia, Mobile: 093 381 0938
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-203
Description : Dining chair @ Private booth
Illustration / Photograph
Location :
level no total
quantity
total quantity 16

specification
Model : Duna chair by Lievore Altherr Molina
Dimension : Width: 65cm; Depth: 53cm; Height: 78.5cm; Seat height: 45cm
Manufacturer/Supplier : Arper
Instructions :
1 Construction: Chair on a cantilever frame in satin-finish stainless steel with the shell in polyethylene
upholstered in fabric.
With cushion the seat height is cm. 48.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-203A
Description : Fabric for Dining chair @ Private booth
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Daybreak
Color : Iris
Composition : 39% Acrylic, 32% Polyester, 20% Viscose, 9% Linen
Width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204
Description : Banquette @ Private booth
Illustration / Photograph
Location :
level no total
quantity
total quantity 8

BB-204A2
BB-204A1

specification
Model : King banquette by Thomas Sandell
Dimension : Width: 223cm; Depth: 109cm; Height: 70cm; Seat height: 43cm
Manufacturer/Supplier : Offecct
Instructions :
1 Construction: King is a modular seating system comprising two single seater options, a two seater sofa,
corner unit and quarter and half circle configurations. Wooden frame with flexible seat in bearing weave. Seat
and back in cold foam with flameproof fibre. Upholstered in fabric.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204A1
Description : Fabric for Banquette @ Private booth
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 7
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204A2
Description : Fabric for Banquette @ Private booth
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 3
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204B
Description : Decorative cushion @ Banquette
Illustration / Photograph
Location :
level no code of fabric quantity
BB-204B1 8
BB-204B2 8
BB-204B3 16
total quantity 32

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204B1
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 7
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204B2
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Monalisa
Color : Rose
Composition :
Width :
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

dwp australia malaysia


3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-204B2
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Arga
Color : Magenta
Composition : 100% Silk
Width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

dwp australia malaysia


3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-205
Description : Bar chair @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 10

specification
Model : Greta/A bar chair by Enrico Franzolini
Dimension : Width: 47cm; Depth: 52.5cm; Height: 103cm; Seat height: 80cm
Manufacturer/Supplier : Accademia Italy
Instructions :
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-205A
Description : Fabric for Bar chair @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 3
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-206
Description : Dining armchair @ Private rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity 18

specification
Model : Grace 834/PMCC armchair with cane back by Mauro Lipparini
Dimension : Width: 59cm; Depth: 55cm; Height: 75cm; Seat height: 47cm
Manufacturer/Supplier : Potocco
Instructions :
1 Construction: Armchair with cane and upholstered back; base: brushed ash wood.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-206A
Description : Fabric for Seat cushion of Dining armchair @ Private rooms
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Classic Jacquards
Color : Cocktail - Watermelon
Composition : 100% Polyester
Width : 145cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

dwp australia malaysia


3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-207
Description : Banquette @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-207A
Description : Fabric for Banquette @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 7
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-207B
Description : Decorative cushion @ Banquette
Illustration / Photograph
Location :
level no code of fabric quantity
BB-207B1 4
BB-207B2 4
total quantity 8

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-207B1
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Monalisa
Color : Rose
Composition :
Width :
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

dwp australia malaysia


3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-207B2
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Palm Beach
Color : Wave
Composition : 100% Silk
Width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-301
Description : Motorised roller blind @ Dining area & Bar lounge
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Motorised roller blind system for blackout blind
Product : Silent Gliss - System 4880 (Motorized system suitable for blind width from 340cm to 500cm)
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: manta@melchers.com.vn
Instructions : 1. For blind less than 4m width: to use tube 4901 dia. 80mm.
2. For blind from 4m width and above: to use tube 4957 dia.110mm.
3. Ceiling fix.
4. Support at ceiling needs to be adequate to the weight of this heavy duty system.
5. Fixing recess needs to be sufficient.
6. System needs to be calibrated individually with fabric at factory before installation.
7. Roller blind fabric to be cut by ultrasonic cutter as appropriate.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-301X
Description : Drawing of Motorised roller blind @ Dining area & Bar lounge
Illustration / Photograph

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-301A
Description : Fabric for Motorised roller blind @ Dining area & Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Novoscreen - Spectra Metallic
Color : 1280
Composition :
Width :
Manufacturer/Supplier : Pavo/ Con Cong Co.,Ltd
96, D5 Str., Ward 25, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 62948404; Fax: +84 (08) 62948407
Contact: Ms Lan Anh, mobile: 0933 650275
Email: lananhnguyen@pavovietnam.com
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-501
Description : Pendant lamp @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 8

specification
Model : Pendant lamp
Dimension : Height: 160cm/ Shade: Width: 20cm; Depth: 20cm; Height: 90cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Acrylic with orange colour.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-502
Description : Pendant lamp @ Private booth
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Pendant lamp
Dimension : Width: 270cm; Depth: 120cm; Height: 170cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Material: inside crystal, outside is pattern fabric laminated on transparent film layer .
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-503
Description : Pendant lamp @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Pendant lamp
Dimension : Dia.: 190cm; Height: 110cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Material: lampshade is pattern silk- look fabric 70% opacity. Light source refer lighting
consultant for information
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-504
Description : Pendant lamp @ Bar lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Pendant lamp
Dimension : Width: 565cm; Depth: 300cm; Height: 95cm
Manufacturer/Supplier : To be bid
Instructions :
1 Construction: Hanging matt stainless steel screen. Refer
drawing BB. In 400 - 409 for details. Refer lighting
consultant documentation for light source issue.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Bamboo Chic Restaurant (level 9)
Issue Date : 29-Nov-11
Revision Date :
Code : BB-801
Description : Artwork @ Private rooms
Illustration / Photograph
180cm
Location :
level no total
quantity
total quantity 2

275cm

specification
Model : Graphic to be approved by Art Consultant
Color :
Dimension : Width: 180cm; Height: 275cm
Manufacturer : To be bid
Instructions :
1 Construction: Graphic print.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufucturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification

Project No. : Vn-08-379


Project Name : Le Meridien HCMC
Area Name/No. : Le Royal Club (level 22)
Isssue Date : 29-Nov-11
Revision :

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e schedule


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date 29-Nov-11
Revision :

Code Description Qty


CASEGOODS
RC-001 Dining table @ Dining area 3
RC-002 Dining table @ Dining area 7
RC-003 Meeting table @ Meeting room 1
RC-004 Reception table @ Reception area 1
RC-005 Coffee table @ Dining lounge 3
RC-006 Coffee table @ Dining lounge 4
UPHOLSTERY
RC-201 Dining chair @ Dining area 7
RC-201A Fabric for Dining chair @ Dining area TBC
RC-202 Bar chair @ Dining area 5
RC-202A Fabric for Bar chair @ Dining area TBC
RC-203 Dining chair @ Dining area 12
RC-203A Vinyl for Dining chair @ Dining area TBC
RC-204 Armchair @ Dining lounge 8
RC-204A Vinyl for Armchair @ Dining lounge TBC
RC-205 Armchair @ Dining lounge 4
RC-205A Fabric for Armchair @ Dining lounge TBC
RC-206 Sofa @ Dining lounge 5
RC-206A Vinyl for Sofa @ Dining lounge TBC
RC-206B Decorative cushion @ Sofa 10
RC-206B1 Fabric for Decorative cushion TBC
RC-206B2 Fabric for Decorative cushion TBC
RC-207 Meeting chair @ Meeting room 6
RC-207A Fabric for Meeting chair @ Meeting room TBC
RC-208 Chair @ Internet area, Reception area 3
RC-208A Fabric for Chair @ Internet room, Reception area TBC
RC-209 Banquette @ Dining area 1
RC-210 Banquette @ Dining area 1
RC-209A,RC-210A Fabric for Banquette @ Dining area TBC
RC-209B, RC-210B Decorative cushion @ Banquette 14
RC-209B1, RC-210B1 Fabric for Decorative cushion TBC

DRAPERY
RC-301 Motorised roller blind @ Buffet area, Dining area, Dining lounge & Meeting room TBC
RC-301X Drawing of Motorised roller blind @ Buffet area, Dining area, Dining lounge X
& Meeting room
RC-301A1 Fabric for Motorised roller blind @ Buffet area, Dining area, Dining lounge TBC
RC-301A2 Fabric for Motorised roller blind @ Meeting room TBC

LIGHTING
RC-501 Floor lamp @ Dining lounge 3
RC-502 Pendant lamp @ Dining area 4
RC-503 Table lamp @ Reception area 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-001
Description : Dining table @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 3

specification
Model : Amari dining round table by Morten Georgsen
Dimension : Dia: 100cm; Height: 74cm
Manufacturer/Supplier : Boconcept/ Tong Khai Minh
Instructions :
1 Construction: Black-stained oak veneer.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-002
Description : Dining table @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 7

specification
Model : Vulcano table by Paola Navone
Dimension : Width: 90cm; Depth: 90cm; Height: 74cm
Manufacturer/Supplier : Poliform/Tong Khai Minh
Instructions :
1 Construction: Base in high glossy black lacquered finish and top in Volakas white marble.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-003
Description : Meeting table @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Elica 2575 table by Prospero Rasulo
Dimension : Dia.: 158cm; Height: 74.5cm
Manufacturer/Supplier : Zanotta/Tong Khai Minh
Instructions :
1 Construction:
Top: chipboard veneered 31mm thick, 10mm bevelled edges.
Reinforced steel beam embedded in the wood.
Legs: solid wood veneered 70x40mm. Metal protection on the bottom rail as a footrest.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-004
Description : Reception table @ Reception area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Jakin table by Abad Diseño
Dimension : Width: 180cm; Depth: 80cm; Height: 73.5cm
Manufacturer/Supplier : Sellex/Tong Khai Minh
Instructions :
1 Construction:
Top: chipboard veneered 31mm thick, 10mm bevelled edges.
Reinforced steel beam embedded in the wood.
Legs: solid wood veneered 70x40mm. Metal protection on the bottom rail as a footrest.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-005
Description : Coffee table @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 3

specification
Model : Holy Day coffee table by Jean-Marie Massaud
Dimension : Dia.: 90cm; Height: 45cm
Manufacturer/Supplier : Viccarbe spain/Tong Khai Minh
Instructions :
1 Construction: Marble top with stainless steel legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-006
Description : Coffee table @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Calder coffee table by Rodolfo Dordoni
Dimension : Width: 120cm; Depth: 90cm; Height: 45cm
Manufacturer/Supplier : Minotti/Tong Khai Minh
Instructions :
1 Construction: Marble top with stainless steel legs.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-201
Description : Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 7

specification
Model : Lea 2085 chair by Roberto Barbieri
Dimension : Width: 54cm; Depth: 53cm; Height: 84cm; Seat height: 45.5cm
Manufacturer/Supplier : Zanotta
Instructions :
1 Construction: Aluminium alloy frame. Seat, back and armrests upholstered in polyurethane. Removable cover
in fabric or leather.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-201A
Description : Fabric for Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Acacia - Sparkle Collection
Color : 31-Passion
Composition : 62% Polyester, 38% Viscose
Width : 138cm
Manufacturer/Supplier : DECO Interior Fabric
179 Nguyen Trong Tuyen St., Ward 8, Phu Nhuan District, HCMC, Vietnam
Tel: +84 (08) 22005969; Fax: +84 (08) 54111678
Email: decovietnam@gmail.com
Contact: Mr Ken Chia, Mobile: 093 381 0938
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-202
Description : Bar chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : Lio 2291/A stool by Roberto Barbieri
Dimension : Width: 44cm; Depth: 48cm; Height: 105cm; Seat height: 76cm
Manufacturer/Supplier : Zanotta/Tong Khai Minh
Instructions :
1 Construction: Frame in polished aluminium alloy varnished graphite. Footrest in satin-finished stainless steel.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-202A
Description : Vinyl for Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell
Color : Florida-Portland
Composition :
width :
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-203
Description : Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 19

specification
Model : Hola 367 armchair by Hannes Wettstein
Dimension : Width: 47cm; Depth: 54cm; Height: 79cm; Seat height: 46cm
Manufacturer/Supplier : Cassina/Tong Khai Minh
Instructions :
1 Construction: Chair with arms, internal steel structure, padded with CFC-free polyurethane foam. Feet in
black plastic material. Covers in removable fabric or soft leather.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-203A
Description : Vinyl for Dining chair @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell Nova
Color : Polar
Composition : 78% Pvc 20% Polycotton 2% Polyurethane
width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-204
Description : Armchair @ Dining lounge
Illustration / Photograph
Location :
RC-204A level no total
In timber veneer finish quantity
total quantity 8

In timber veneer finish


specification
Model : Portofino armchair by Rodolfo Dordoni
Dimension : Width: 72cm; Depth: 95cm; Height: 93cm; Seat height: 40cm
Manufacturer/Supplier : Minotti/Tong Khai Minh
Instructions :
1 Construction: Frame in metal & fixed base.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-204A
Description : Vinyl for Armchair @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell Nova
Color : Polar
Composition : 78% Pvc 20% Polycotton 2% Polyurethane
width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-205
Description : Armchair @ Dining lounge
Illustration / Photograph
RC-205A Location :
level no total
quantity
In timber veneer finish total quantity 4

RC-205A
specification
Model : Martin chair by Rodolfo Dordoni
Dimension : Width: 78cm; Depth: 86cm; Height: 70cm; Seat height: 41cm
Manufacturer/Supplier : Minotti/Tong Khai Minh
Instructions :
1 Construction: Base: in metal made of round tube Ø mm 55, black-nickel finish. With return mechanism.
Protective nylon glides.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-205A
Description : Fabric for Armchair @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Acacia - Sparkle Collection
Color : 07-Pinecone
Composition : 62% Polyester, 38% Viscose
Width : 138cm
Manufacturer/Supplier : DECO Interior Fabric
179 Nguyen Trong Tuyen St., Ward 8, Phu Nhuan District, HCMC, Vietnam
Tel: +84 (08) 22005969; Fax: +84 (08) 54111678
Email: decovietnam@gmail.com
Contact: Mr Ken Chia, Mobile: 093 381 0938
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-206
Description : Sofa @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : Ray sofa by Antonio Citterio
Dimension : Width: 180cm; Depth: 90cm; Height: 63cm; Seat height: 39cm
Manufacturer/Supplier : B&B Italia/Tong Khai Minh
Instructions :
1 Construction:
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-206A
Description : Vinyl for Sofa @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell Nova
Color : Polar
Composition : 78% Pvc 20% Polycotton 2% Polyurethane
width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-206B
Description : Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no code of vinyl quantity
RC-206B1 5
RC-206B2 5
total quantity 10

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-206B1
Description : Fabric for Decorative cushion
Illustration / Photograph
Use back side of fabric Location :
level no total
quantity
total quantity TBC

specification
Style Name : Silhouette
Color : Haze
Composition : 100% Polyester
Width : 140cm
Pattern repeat : H36cm x W46cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-206B2
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Arga
Color : Magenta
Composition : 100% Silk
Width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-207
Description : Meeting chair @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity 6

specification
Model : Oxford 3272 chair by Arne Jacobsen
Dimension : Width: 60cm; Depth: 60cm; Height: 126cm; Seat height: 48cm
Manufacturer/Supplier : Fritz Hansen/Tong Khai Minh
Instructions :
1 Construction: With unupholstered alu-arms, fixed seat height, swivel, toes.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-207A
Description : Vinyl for Meeting chair @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Lustrell Nova
Color : Polar
Composition : 78% Pvc 20% Polycotton 2% Polyurethane
width : 137cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-208
Description : Chair @ Internet area, Reception area
Illustration / Photograph
Location :
level no total
quantity
total quantity 3

specification
Model : Oxford 3273 chair by Arne Jacobsen
Dimension : Width: 60cm; Depth: 57cm; Height: 102cm; Seat height: 48cm
Manufacturer/Supplier : Fritz Hansen/ Tong Khai Minh
Instructions :
1 Construction: With unupholstered alu-arms, fixed seat height, swivel, toes.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-208A
Description : Fabric for Chair @ Internet area, Reception area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name :
Color : Metallic 7
Composition :
Width :
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-209
Description : Banquette @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-210
Description : Banquette @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-209A, RC-210A
Description : Fabric for Banquette
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Classic Jacquards - Husk
Color : Linen
Composition : 37% Viscose, 21% Cotton, 24% Polyester, 18% Linen
Width : 144cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-209B, RC-210B
Description : Decorative cushion @ Banquette
Illustration / Photograph
Location :
level no Code of Banquette quantity
RC-209 8
RC-210 6
total quantity 14

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-209B1, RC-210B1
Description : Fabric for Decorative cushion
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Matteo
Color : Tangelo
Composition : 100% Polyester
Width : 138cm
Manufacturer/Supplier : Warwick
Room 301, Nha Viet Plaza, 25 Dinh Bo Linh, Binh Thanh Dist., HCMC, Vietnam
Tel: +84 (08) 54453294; Fax: +84 (08) 54453295
Contact: Ms Nhi, mobile: 0908424699
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-301
Description : Motorised roller blind @ Buffet area, Dining area, Dining lounge
& Meeting room
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Motorised roller blind system for blackout blind
Product : Silent Gliss - System 4880 (Motorized system suitable for blind width from 340cm to 500cm)
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: manta@melchers.com.vn
Instructions : 1. For blind less than 4m width: to use tube 4901 dia. 80mm.
2. For blind from 4m width and above: to use tube 4957 dia.110mm.
3. Ceiling fix.
4. Support at ceiling needs to be adequate to the weight of this heavy duty system.
5. Fixing recess needs to be sufficient.
6. System needs to be calibrated individually with fabric at factory before installation.
7. Roller blind fabric to be cut by ultrasonic cutter as appropriate.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-301X
Description : Drawing of Motorised roller blind @ Buffet area, Dining area,
Dining lounge & Meeting room
Illustration / Photograph

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-301A1
Description : Fabric for Motorised roller blind @ Buffet area, Dining area,
Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Comet non-blackout
Color : Snow
Composition : 50% polyester, 50% Polyester Cationic
Width : 250cm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-301A2
Description : Fabric for Motorised roller blind @ Meeting room
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Style Name : Comet blackout
Color : Snow
Composition : 50% polyester, 50% Polyester Cationic
Width : 250cm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: manta@melchers.com.vn
Contact: Ms Bao Ngoc, mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication.
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.
8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices


dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-501
Description : Floor lamp @ Dining lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 3

specification
Model : Tolomeo Mega floor lamp by Michele De Lucchi, Giancarlo Fassina
Dimension : Height: 238 cm; Diffuser: dia.42 cm;
Manufacturer/Supplier : Artemide/ / Tong Khai Minh
Instructions :
1 Construction: Materials: Polished aluminium base and cantilevered arms; diffuser in parchment paper or in
silk satin fabric on a plastic frame; joints in polished aluminium.
Light source: HALO max 1x150W (E 27) – ECO, dimmable.
Colours: base and structure: mirror, diffuser: white.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-502
Description : Pendant lamp @ Dining area
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Cyla single pendant lamp
Dimension :
JgoodDesign/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
1 Construction: Hang from stem or cord. Halogen, incandescent, LED light sources. Color: amber. Hand-made.
Eco-Friendly.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
design worldwide partnership

B502 ff&e specification sheet


Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Le Royal Club (level 22)
Issue Date : 29-Nov-11
Revision Date :
Code : RC-503
Description : Table lamp @ Reception area
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Mercer M table lamp by Joan Gaspar & Javier M. Borrás
Dimension : Shade Dia.: 29cm, Base Dia.: 18.6cm; Height: 41cm
Marset/ KimSa Decor Co., Ltd.
Manufacturer/Supplier : Maxi Light 138 Yersin, Dist 1, HCM City, Viet Nam.
T (84-8) 38210800 Ext: 303 | F (84-8) 38218148
Instructions :
1 Construction: This lamp has a black ribbed cotton shade, which is more sophisticated and sends out light
directed to the top and bottom.
2 Voltage : To be recommended by lighting manufacturer.
3 Wattage: To be recommended by lighting manufacturer.
4 Manufacturer to submit finish sample for Designer approval.
5 Manufacturer to submit shop drawings for Designer approval.
6 Manufacturer to provide exact prototype for designer's approval prior to fabrication.
7 Dimensions are subject to change as per a result of perfecting the prototype.
8 Manufacturer to provide hanging/security details for electrician.
9 Manufacturer to provide or submit weight requirements for engineer.
10 Manufacturer to supply all necessary hardware and instructions for installation of fixture.
11 In warm and humid climates, all exposed metal (harp, structure and any exposed metal) to be rust proof.
12 Fixture must be Underwriter's Laboratory approved and meet all applicable local code requirements for the
project location.
13 The General Contractor will supply and install all lamps.
14 Switch and dimmer location TBC with operator.
15 Refer to Lighting Specifications (Preamble) for additional instructions.
16 Manufacturer (Vendor) warrants all products from all defects and guarantees to replace and and all parts
should they prove deficient within one year from owner acceptance. All costs in this regards shall be born by
the manufacturer. All items must be of contract quality and suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam

You might also like