This fluorescent fixture is intended for specific Dimensions applications that are wet or controlled such as LENGTH: 50” food/beverage processing, pharmaceuticals, or WIDTH: 6” other non hazardous environments. Certain HEIGHT: 4.2” applications that have airborne contaminates can decrease the integrity of the polycarbonate Mounting fluorescent fixture. The fluorescent fixture can be surface mounted, suspended, or pendant mounted (with optional Construction pendant mounting kit). Non-conductive, non-corrosive, fully gasketed grey polycarbonate housing and clear polycarbonate Listings diffuser. Detachable stainless steel clips form seal ETL 3097700 listed, conforms to UL 1598. Certified between housing and diffuser. Internal steel gear to CSA C22.2 No. 250.0. plate of the fluorescent fixture adds strength and durability for pendant mounting. Smooth housing Warranty and diffuser components allow for easy cleaning. The fluorescent fixture has a one year warranty against manufacturing defects. Ballast warranty is Finish provided through the ballast manufacturer. All metal parts of the fluorescent fixture are white powder coated post manufacturing to ensure Fluorescent Fixture Accessories smooth edges. • Pendant mounting kit • Aircraft cable type hanging gear Diffuser Diffuser is polycarbonate with a smooth outside and prismatic inside to allow for maximum light as well www.advance.philips.com as easy cleaning. www.sylvania.com www.gelighting.com Electronic Ballast www.sunparkelectronics.com Energy efficient, 120-277 multi-volt, electronic, automatic resetting, instant start T8 ballasts are standard in all fixtures. Ballasts installed in fixtures are either GE, Sylvania, Advance or Sunpark.