Satellite Dish F-81 Barrel Connector is used to power 2 TV's, 3 TV's or 4 TV's. If your home is pre-wired and there's only one coaxial cable, use this diagram to get the satellite signal feed from the dish antenna outside to your satellite receiver inside. Then feed the satellite receiver's output signal back down the same line to the outside of your home. Tie into the existing coaxial cable(s) there to feed your 2nd, 3rd, or
Satellite Dish F-81 Barrel Connector is used to power 2 TV's, 3 TV's or 4 TV's. If your home is pre-wired and there's only one coaxial cable, use this diagram to get the satellite signal feed from the dish antenna outside to your satellite receiver inside. Then feed the satellite receiver's output signal back down the same line to the outside of your home. Tie into the existing coaxial cable(s) there to feed your 2nd, 3rd, or
Satellite Dish F-81 Barrel Connector is used to power 2 TV's, 3 TV's or 4 TV's. If your home is pre-wired and there's only one coaxial cable, use this diagram to get the satellite signal feed from the dish antenna outside to your satellite receiver inside. Then feed the satellite receiver's output signal back down the same line to the outside of your home. Tie into the existing coaxial cable(s) there to feed your 2nd, 3rd, or
Connector with a 2-way splitter to power 2 TV’s, a 3-way splitter to power 3 TV’s, a 4-way splitter to power 4 TV’s, etc.
EXTERIOR WALL
2nd TELEVISION
PROBLEM: You’d like to mirror a
second TV in another part of your home with your existing satellite re- ceiver but your home is pre-wired and there’s only one coaxial cable!
SOLUTION: Use this diagram to get
Satellite Receiver the satellite signal feed from the dish 2-WAY
SAT IN TV OUT antenna outside to your satellite re-
ceiver inside ~ then feed the satellite receiver’s output signal right back down the same line to the outside of your home ~ then tie into the existing INPUT coaxial cable(s) there to feed your TELEVISION 2nd, 3rd, or 4th television sets.