• Some string APPLY GLUE HERE • A coin or similar weight • Scissors Fold here Punch hole here • Glue • Adhesive Tape
Cut along the dashed line and
1 seperate the clinometer shape from this template sheet.
Carefully punch a hole at the center
2 point of the protractor. Make sure the hole is just large enough to pass your piece of string through - the larger the hole, the less accurate the readings! 90 Now fold along the line that attaches 3 the rectangle shape to the protractor, 80 creating a hinge. www.virtualmaths.org Apply some glue to the gray marked 70 4 area and roll the rectangle to form your scope. 60 Apply some adhesive tape to the scope (print on card) 5 hinge to add strength 50 Cut off about a foot length of string and 40 6 thread it through the hole you created earlier. Now take the length you passed 30 through and tie some knots in it so its held 20 0 10 in place and cant pass back through the hole
Take a coin or another weighted object and stick it
7 with adhesive tape, to the other side of the string creating a plumb-line.
Shapes, Space & Measure Calculating the height of a building