DESIGN,
Fk ~ aelece DESIGNMYIDEA.COM
SketchUp - Reference Sheet
Drawings Tools
Select Too! Line Toot | Arc Too! | Freehand Too! | Shape Tools Offset Toot
O Z| IC es) meyv |
Used seed | Diawstaigit | Diawanae | Drawacutinous | Draw ile shown Ortset a curve by
objects, eurfaras, | linac hatwean | hatwaen two lina in any pratatermined | solocting 220 curve and
points or materials.| _ two points points, direction or curve. shapes dragging offset distance.
Drawing Manipulation lols 3D Development Iools
Move Too! Rotato Too! Scale Too! Push/Pull Too! Follow Mo Too!
ee iS] fs] Ey SD
Move surfaces, | Rotate surfaces, | Scale or etreich By celecting an ‘Select an enclosed eurtace
lines or oblects | lines or oblecis oblects by enclosed surface the | tobe extruded alona a pre-
in any direction. | in any direction. | adjusting pull tabs. shape can be extruded. drawn path,
Rendering Tools
Fill Too! Shadows Tool Export Rendered Image (JPEG)
\s [Strenatt ee Files Raport™ 20 Objeet
Usad to select Apply lighting and shading to current drawing Save the current
objects, poinls or] Shadows can be adjusted by sliding the dale (red vlevr as an image
materials boar) andor time (blue bar). (PEG, TIFF, GIF),
Short Cuts Important Links
View Rotate | Click Middle Mouse Button | | SketchUp Download| htp//sketchup.google.comidownload.htm!
View Zoom ‘Scroll wheel up/down ‘SketchUp Models | hito//sketchup google cam/3dwarshouse!
End Command | ESC SketchUp Tutorials | htto:/iamw.sketchup.com/?section=training
Undo CRIL+Z
Rede CTRL
www.designmyidea.com
+ P: 800.862.0546 * F: 801.406.0327 + design@designmyldea.com * 3260 N.E. Frontage Road * Lehi, UT 64043 *
Pro
rey
fenceDESIGN,
Fk ~ aelece DESIGNMYIDEA.COM
SketchUp - Drawing Setup
Google SketchUp is setup by default to use Architectural Units of measurement. For Invention
modeling, we may need to use smaller units of measurement.
How to Setup for Product Drawing =
4) To set the drawing units to the correct measurements. | ML==Lic Mm
select WINDOW > MODEL INFO. Sette:
Materials
2) From the Model Info window, sclect UNITS
from the left hand list
3) Change FORMAL trom ARCHITECTURAL to DECIMAL.
4) Change PRECISION from 0.0” to 0.001
5) Change ENABLE LENGTH SNAPPING from 0.1” to 0.125”.
Iv Enable lenath snzoning [0.125"
IF Dielay unite format
a
‘angle vats
Predeon: fog |
7 Enable angle mapping [35,9 >!
6) Hit ENTER to accept the changes.
www.designmyidea.com
+ P: 800.862.0546 * F: 801.406.0327 + design@designmyldea.com * 3260 N.E. Frontage Road * Lehi, UT 64043 *
April 200 ms 5 yDESIGN,
Fk ~ aelece DESIGNMYIDEA.COM
SketchUp - Travel Mug Tutorial
How to Create the Lid
1) Start by drawing a circle [@] with a 1.5" radius
2) Extrude [4] the circle by selecting the circle surface and “pulling” up 0.5”.
—~
‘a Ii , (ai
3) Create the lid lip by offsotting|(F | the top surface 0.125” & )
4) Push| 44] the inner surface down 0.125” to finish the lip.
9) Rotate view using center mouse button to create the underside recess by offsetting []the
eirele surface 0.125” and pushing |, |the surface up 0.25”.
6) Add @ hole to the top of the lid by drawing a
circle ie on the lid surface.
7) Now pusi + the hole down til it meets the lower surface.
(the surface will become blue and tan if at the correct depth
and when you left click, the surface will disappear)
8) Using the select too! | | drag a window over the entire lid
to highlight all the surfaces. Right Click and select
MAKE COMPONENT and enter “Lid” as the name.
9) Naw mave |.8@| the fied up 5” sa it will rast on the top of MUG when we are finished
10) Next, put the LID on It’s own layer. Select WINDOW > LAYERS
To ADD a layer select the |®] and name the new layer “LID”.
Add another layer and call this one “MUG”. Turn the
LID LAYER visibility off by UNCHECKING VISIBLE.
11) Now move the LID to the LID LAYER by selecting| * |the LID.
Then in the top lett corner trom the layer drop down select
the LID LAYER. "
12) Our Lid for the travel mug is complete.
www.designmyidea.com
+ P: 800.862.0546 + F: 801.406.0327 + design@designmyldea.com + 3280 N.E. Frontage Road * Lehi, UT 84043 +
Official
rey
Een
Fractional Differential Equations: An Introduction to Fractional Derivatives, Fractional Differential Equations, to Methods of Their Solution and Some of Their Applications