You are on page 1of 2

To, Katira Construction Ref: Your letter dated 13/05/2011 Name of Work : Construction of Hostel Block at Adani Institute

of Medical Science Bhuj Brand : Kamrup A product of Zircon Exports Pvt.ltd. Sub:- Test on Flush Shutter Brand : Swastik Dear Sir, Please find herewith the results of Flush Door Shutter supplied by you from your above site. Sr. No. 1 Dimensions Description Observation Thickness = 38.05 mm As per various part of IS 4020 and 2202 part - 1 Tested as per Part 2 and variation in thickness between two point should not more than 0.8mm, width and length shall be within +/5mm Tested as per Part 3 and cupping and warpping should not exceed 6mm Tested as per Part 4 and deviation at any point measured should not more than 0.5mm Thickness in mm : 38 Dimension in mm: 2135X910

Squareness

0.5

General flatness test

Local planeness test

0.36

Impact indentation test

Part 5 - 'No abnormal defects No Abnormal Defects observed and should observed & indentation < Indentation = 0.15 0.2 mm No visible damage Part 10 - No Visible Damage should cause after first fifty drops Tested as per Part 11 and should not show any damage Part 14 Tested as per Part 15 and should not show any sign of Delamination Part 16 - Reqd. load to withdraw screw > 100 kg

Slamming test

7 8

Misuse test Knife Test

No appreciable damage Well Bonded Plies

Glue Adhesion Test

No appreciable delamination

10

Screw withdrawal resistance test

116

Note : 1) The testing was done as per relavent parts of IS 4020 (Part 1 to 16)-1998. 2) The samples confirms to the requirements of IS : 2202. Hence, it can be used for desired purpose. 3) Results reflect the properties of sample supplied to us. 4) Results certificate not be used for publicity / Product promotion. Results shall not be reproduced except in full. 5) We do not undertake or We are not bound to participate or appear in any legal - court matter or litigation on any issues what so ever. 6) Tested sample may be preserved only for 15 days time unless otherwise requested. Thanking you Yours Faithfully, For, KCT Consultancy Services,

(Dr. K.C.Thaker)

LXXX

This document was created with Win2PDF available at http://www.win2pdf.com. The unregistered version of Win2PDF is for evaluation or non-commercial use only. This page will not be added after purchasing Win2PDF.

You might also like